Led retrofitting of decorative pole lighting guide july 2013

transcript

July 2013 Confidential

Page: 1 More Information: http://www.metroledlighting.com/application/post-top-lighting

www.MetroLEDLighting.Com | 518-409-8090 | Info@MetroLEDLighting.com | Confidential Page: 2

Extraordinary Variety of Fixture Styles and Designs Needs:

Retrofitting for lower costs, improved lighting performance, and to maintain integrity of the design

www.MetroLEDLighting.Com | 518-409-8090 | Info@MetroLEDLighting.com

1697 – “House keepers within this city shall put out lights in their windows fronting ye respective street” Common Council

1762 – Levy a Tax for Street Lamps 1809 – Baltimore introduces gas lights 1877 – Arc Lighting Newark, NJ 1880s – 1910s – Commercial Area Arc Lighting NYC 1892 – Edison Illuminates 5th Ave NYC 1900s – Bishops Crook Symbol of NYC 1908 – First Mast Arm Introduced 1913 – Incandescent Mast Arm, Bishop Crook, Scroll

Basket 1934 – 76 Types of ‘Standard’ Post Lights Cataloged in

Page: 3

Colonial Street Lamp 19th Cent. Gas Lamp

5th Ave Incandescent Street Lamp

Bishop Crook Street Lamp

Street Lighting: Parkways, Historic Districts, Retail Lighting, Parking Lot Lighting, Roadways, Access Roads

Shielded Teardrop & Arm Extension

Decorative Teardrop & Scroll Design

Mast Arm Post Light Bishop Crook Decorative Pole

Pedestrian Lighting: Parks, Recreation, Pathways, Campuses, Walkways, Transit Platforms, etc.

‘Central Park’ Pole Light

Acorn Pole Light

Cut-off Pole Light ‘Modern’ Pole Light

www.MetroLEDLighting.Com | 518-409-8090 | Info@MetroLEDLighting.com | Confidential

Central Park NYC – DOE Report ◦ 1,600 Fixtures = $178,560 per year maintenance ◦ $111.60 / Fixture / Year $65.60 for Ballasts and Pole Maintenance $46.00 for Lamps

Sacramento Lighting – DOE Report ◦ Street Light Maintenance Budget $1.7M / Year ◦ 35,000 to 40,000 fixtures in the city ◦ Spot Replacements - $400 - $750 / Incident ◦ Average Cost/ Fixture / Year $45 - $65

Page: 6

Maintain the integrity of the aesthetic design elements ◦ No Effect on Design Elements ◦ Color of Lighting / Illumination Quality

Meet Lighting Standards ◦ Pattern of Light & Levels

Lower Costs ◦ Periodic Maintenance ◦ Operating Costs / Electricity

Page: 7

Wasted Light ~ 20%+ LED Pole Lighting: - Less Sky-glow – Dark Sky Compliance - Directed Optics – No Upward Light Wasted or Refracted Losses - Optics Design – Less Light Trespass, Control Over Shaping of Pattern

Optical Design and Control

Better Vertical Illumination = Ability to See Pedestrians

Better Horizontal Illumination= See Roadway or Sidewalk Features

Less Waste

Wasted Light ~ 20%+ High Pressure Sodium (HPS) Street Light: Power = 128 Watts Lab Test Output = 6,432 Lumens Lab Efficiency = 50.1 Lumens/ Watt Delivered Lumens = 2,694 Lumens Application Efficiency = 42% Overall Efficiency = 21 Lumens/ Watt

LED Street Light: Power = 63 Watts Lab Test Output = 5,304 Lumens Lab Efficiency = 84.6 Lumens/ Watt Delivered Lumens = 3,006 Lumens Application Efficiency = 57% Overall Efficiency = 48 Lumens/ Watt

128% Improvement HPS to LED

LEDs More Light on the Ground, Using Less Energy Source DOE Sacramento

10’ 20’

5.75 FC – MH 3.66 FC – LED

Δ -36% 1.39 FC – MH 0.76 FC – LED

Δ -45%

1.03 FC – MH 2.64 FC – LED

Δ +156%

5.68 FC – MH 10.93 FC – LED

Δ +92% 1.17 FC – MH 2.89 FC – LED

Δ +147% 5.14 FC – MH 7.89 FC – LED

Δ +53%

0.63 FC – MH 1.95 FC – LED

Δ +209%

4.08 FC – MH 8.18 FC – LED

Δ +100%

6’ 4’

% Change in Avg. Foot Candle Avg. Foot Candles at Heights of 2’,4’,6’ (FC=Foot Candles)

Source: DOE Central Park

Lower Light Levels – Less Light Trespass

Lighting Design - Color Choice ◦ Warmer Temperatures to emulate incandescent look

& feel ◦ Cooler Temperatures for nigh vision acuity

Fixed Source Temperature v. Selected Color ◦ HPS / Metal Decorative Pole Lamps – Fixed Color

Temp. HPS – 2,100K / Metal Halide – 4,200K

◦ LED Lamp Sources Available in Range of Color Temps

Page: 11

Color Temp (K) Source LED Choices

2,700K – 3,300K Incandescent Lamp 2,700K

3,000K Warm White CFL

4,100K Moonlight

5,000K Daylight Horizon

5,500K Daylight Noon

6,500K Daylight Overcast 6,500K

CRI – Ability to predict color appearance of an object under the light ◦ Distinguish a standard set of colors

Ability to naturally see colors of objects on pathways, roads, parking lots, etc.

Incandescent Lamp = 100 ◦ Older Standard / Familiar Source

Page: 12

Light Source CRI Typical LED

High Pressure Sodium (HPS) 24

Warm White Fluorescent 51

Cool White Fluorescent 64 65 to 85+

Quartz Metal Halide 85

Halogen 95

Incandescent 100

www.MetroLEDLighting.Com | 518-409-8090 | Info@MetroLEDLighting.com

Screw-In Designs ◦ Orientation – Has to be designed for base up

or base down for post tops or teardrops Heat dissipation requirements

◦ Places blub in same orientation as existing lamp sources

◦ Integrated or Non-Integrated LED Drivers ◦ Light Patterns – IES Distributions ◦ Rebates – Sometimes not available unless the

lamp is physically attached to fixture

Bolt-In Designs ◦ Often able to be oriented for Pole Lamps or

Teardrop Pole Lighting Styles ◦ Uses thermal mass of fixture housing and pole

for heat removal ◦ Driver typically located on bracket in housing ◦ Greater control of light pattern ◦ Typically better able to cutoff lighting for dark

sky requirements ◦ Rebates available

Page: 13

www.MetroLEDLighting.Com | 518-409-8090 | Info@MetroLEDLighting.com Page: 14

Fixtures Manufacturer Features

IntenCity Lighting - PTLK -- Post Top or Tear Drop Configurations -- Rugged Monolith Design, External Driver, Bolt-in for Maximum Heat Dissipation - - Higher Lumens for Street Lighting Application Type III or V IES Distributions CCT = 4,100K – 5,500K (2,700 Special Order)| CRI = 66 |Lumens = 3,000, 5,000, or 6,500

Eye Lighting - LEDioc -- Post Top or Tear Drop Configuration - - Screw Base / External Driver - - Closely Follows Lamp Geometry - - Engineering Services to Adapt to Fixtures Type III or V IES Distributions CCT = 3,000k or 5,000K | CRI = 70 or 85 | Lumens = 3,100 or 4,400 Lumens

Sansi Post Top Light -- Post Top Orientation - - Screw Base / Integrated Driver -- Choice in Screw Base E26/ E27/E39 Type V IES Distribution CCT = 4,500 / 5,000K | CRI = 70 | Lumens = 3,250 or 4,800

www.MetroLEDLighting.Com | 518-409-8090 | Info@MetroLEDLighting.com Page: 15

Fixture Power

Fixture & Operating

Costs/ 10K Hrs Cost Year/

12 Hour-Day Savings /

Year v. HPS % Savings

v. HPS IntenCity PTLK 40W $124.43 $54.50 -$104.20 66%

LEDioc Eye Lighting 41W $117.21 $51.34 -$106.36 68%

Sansi Post Top 45W $110.79 $48.52 -$110.18 69%

HPS Post Top Fixture 183W $362.33 $158.70 - -

$0.15 per KwH Lamp Maint/ Yr. = $46.00 Ballast Maint/ Yr. = $65.60

70,000 Hrs. / 16 Yrs. (12hrs. / day)

40, 60, 90 Watts 2,700K -5,000K

(Warm to Bright White) 3,000 to 6,000 lumens Type III, IV Distribution Fits many acorn or

common globes Integration Services

Available – PTLK, Adapter, Globes

Page: 16

Extensive thermal protection for longevity

No wasted light from omni- directional lamps, low light pollution

Directed light to where it used

Sealed light engine – no bugs & low depreciation

Sized to fit adapters, fast installation Custom plate adapters available Driver in pole housing

DLC Listed for Rebates

Post Top Fitter & Globe Kit Tear Drop Kit

Lumens Photopic 4,400 3,600 5,500 8,000 13,800

Scotopic 9,240 2,770 3,470 5,040 8,700

37W LEDioc 5000K/E26 BASE

- Designed to be Same Size and Configuration of Existing Lamp Sources - Maintains Light Source Look and Feel in Retrofit - Effective Replacement for HPS to 150W

www.MetroLEDLighting.Com | 518-409-8090 | Info@MetroLEDLighting.com | Confidential Page : 20

Existing High Pressure Sodium (HPS) Decorative Pole Lamp

LED Retrofit Decorative Pole Lamp

Park Lighting Retrofit Decorative Pole Lighting 3,000K / Mogul Base

Need more than a typical fixture ◦ Rugged environments of outdoor lighting ◦ Intuitional / Commercial / Architectural ◦ Performance in outdoor conditions

Desire greater efficiency ◦ Lower energy bills ◦ Saving of maintenance costs

Seek guidance to find the best fit ◦ Of technology to application & customer’s property ◦ Sort through the many choices in the market ◦ Claims versus performance

Benefit from understanding the experience of products in the field

Page: 23

Metro: The Outdoor Lighting Design Specialist & Experts

Balancing the tradeoffs and decisions in implementing in energy efficient lighting Call: 518-409-8090 Write: info@metroledlighting.com Visit: www.metroledlighting.com

Page: 24

Led retrofitting of decorative pole lighting guide july 2013

Technology