AMIGA 52 THERMAL LAMINATOR

TAILORED

TOWARDS DIGITAL PRINTS

• Professional quality Lamination for variety of smalljobs up to B2 format

• Unique software features to mini mise waste sheets

• Designed for unattended operation

• Built-in help and self-diagnostics

• Machine designed to fit through an 100 cm wide door

• Wide range of options

• Bottom suction feeder with possibility of adding the sheets continuously

• Processor controlled feeding head for stable sheet feeding (option)

• Additional separation air blowers, processor controlled, for reliable sheet feeding (feeding head option)

• Electronically controlled gate for accurate and stable sheet overlap at any production speed

• Graphical touch screen for comfortable multi-language operation

• Ability to process any common laminating film for digital output

• Continuous automatic checking of the whole Lamination process (feeding, temperature, air pressure,

sheet separation, etc.) to ensure 100% quality result

DESIGNED AND MANUFACTURED IN THE CZECH REPUBLIC

li www.komfilaminators.com

>­_...J

o z w

u....

<(

G

MACHINE CONFIGURATION SCHEME 8 = basic O = option

UNWINDING UNIT

Height adjustable spread roll (8) On-roll film slitter {O) Additional on-roll perforator (O) On-roll perforator (O)

SEPARATOR

Built-in perforator (B) Decurling roll+bar (B) Speed adjustable se pa rating roll (B) Flying knife (O) Antistatic bar (O)

UNLOADING

Fixed delivery desk (B) Jagger {O) Stacker (O)

BASIC CONFIGURATION

LAMINATING UNIT

Rubber coated pressure roll (B} Teflon coated pressure roll (O) Polyurethane coated pressure roll (O) OTF modification (O) PSA modification (O) "COMBO" version (OTF+PSA) (O} Sheet preheating (O} Embossing modification (O)

FEEDER

Bottom feeder (B) Vacuum pump (B) Feeding head + additional separation air blowers (O) Auxiliary piston compressor (O)

OTHER OPTIONS

Film roll lift (O) Spare parts kit (O)

OPTIONS o Bottom suction feeder with possibility of adding the sheets continuously o Machine options in details o Vacuum pump o Automatic sheet overlap control o Mis-feeding detection o IR heated and PID controlled Laminating cylinder o Temperature drop detection o NBR (rubber) coated pressure roll o Air pressure decrease detector o Combined de-curling unit {bar and roller) o Automatic sheet separation using built-in perforator o Electronically controlled snapping unit o Speed adjustable separating roller o Sheet separation detector o Fixed delivery desk

TECHNICAL PARAMETERS

Maximum speed of lamination:

Maximum sheet dimensions:

Minimum sheet dimensions:

Pape r weight

Thickness of laminating film:

Kind of laminating film:

Time of laminating roll warm up (25+100 °C):

Sheet overlap accuracy (at constant laminating speed):

Machine dimensions including delivery desk (L • W • H):

Air supply:

Air consumption at stable run:

*For Amiga 52 wit h optional feeding head.

20 mimin; 25 mimin*

on www.komfilaminators.com

CUSTOM-BUILT SOLUTIONS o Possibility of individual

machine modification based on specific requirements

o US version available

52 • 74 cm; 53 • 80 cm (20 • 29"; 20.5 • 31")*

20 • 20cm WEBPAGE

115-350 g/m2; 115-600 glm2*

24-501Jm

OPP, PET, Nylon

3.5 min

:1:1mm;:1:2mm*

256 • 122 • 160 cm; 245 • 99 • 160 cm*

6 bar

10 Umin; 60 I/min*

VIDEO

The technical parameters may change without prior notice. Find more details about t he product and its t echnical parameters on www.komftlamlnaton.com.

KOMFI spol. sr. o. I Dvoř~kova 1001 I 563 01 Lanškroun I Czech Republic I info@komfi.cz I www.komfilaminators.com