Post on 31-May-2020
transcript
L22 BA4 52
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05 496
L1 / L2 Series • OverviewHow to order: (example)
L22 BA4 52
Valve series
PortType
Version
L11 = 1/8 Aluminium
L12 = 1/4 Aluminium
L22 = 1/4 Aluminium
L23 = 3/8 Aluminium
Technical Data
5-ported, 2- or 3-position valves, solenoid pilot actuatedPort size: L11 / L12 series = 1/8 or 1/4 L22 / L23 series = 1/4 or 3/8
Flow capacity: L11 / L12 series = 1000 Nl/min = CV 1.0 L22 / L23 series = 1700 Nl/min = CV 1.7
Operating pressure: Vacuum to 10 bar, optioal to 15 bar; with external pilot supply = vacuum to 21 bar
Pilot pressure range: 1 to 10 bar (up to 15 bar upon request)
Voltage: 24 VDC ± 10% 24 V, - 110 V,- 230 V, 50-60 Hz ± 10%
Power input: 3.35 W; optional 5.5 W (DC only) 10/7 VA
Response Times [ms]Single actuated (5-port., 2-pos.) energise 10 de-energise 35 energise 7 de-energise 35
Dual actuated (5-port., 2-pos.) energise 10 — energise 7 —
Dual actuated (5-port., 3-pos.) energise 10 de-energise 35 energise 7 de-energise 35
MaterialBody: Aluminium alloy
Other Parts: Stainless steel, steel, aluminium alloy or plastic
Static Seals: NBR
Finish: Anodized and varnishedNote: For conversion to external pilot supply please refer to page 531
ValveMounting
52 = Line mounted
00* = Manifold mounted w/o Adapter
* L11 / L12 series only
solenoid actuated valve (BA... BB...)
ValveFunction
PP6 =
PP7 =
JA4* =
JJ4* =
JJ5* =
JJ6* =
JJ7* =
* L22 / L23 series only
ValveFunction
BA4 =
BB4 =
BB5 =
BB6 =
BB7 =
PA4 =
PP4 =
PP5 =
B G 000 61
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05 497
Order example: L22BA452BG00061
This refers to a L2 series single solenoid pilot actuated 5-ported, 2-position directional valve withspring return. Port size of the valve is G 1/4. Turning manual override is stan dard.The solenoid is intended for a female connector to industrial form, type 22 mm and has a voltageof 24 VDC.
L1 / L2 Series • Overview
Optionsg
000* = Turning manual override BA / BB-valves
000 = Pushing, non locking manual override JA / JJ-valves
000* = Without manual override PA / PP-valves
12A = Version withVITON®-O-rings
14A = Version for external pilot air
15Z = Solenoid rotated by 180°
17P = Non-locking manual override,BA- / BB-valves
Q16 = As 3-port., 2-pos. valve, NC (normally closed)
R16 = As 3-port., 2-pos. valveNO (normally open)
17G = Low wattage: 1.42 W (up to max. 8 bar) in DC only
* manual override acting on pilot valveMore options on request
Voltage
61 = 24 VDC
40 = 230 VAC/50-60 Hz
30 = 110 VAC/50-60 Hz
20 = 24 VAC/50-60 Hz
00 = Air pilot actuated
SolenoidType
0 = Air pilot actuatedPA / PP / JA / JJ-valves
0 = AC, solenoid to industrial form, type 22 mm BA / BB-valves
A = AC and DC, solenoid to DIN EN 175301-803,(old DIN 43650), form B, BA /BB valves
B = DC, solenoid to industrial form, type 22 mm BA / BB-valves
PortType
G = G-thread
0 = NPTF-thread
air pilot actuated valvewith manual override
(JA... JJ...)
air pilot actuated valvew/o manual override
(PA... PP...)
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05498
Single or Dual Solenoid Pilot Actuated ValvesPort Size 1/8 or 1/4
L1 Series • Dimensions
L11 / L12 BA4..
L11 / L12 BB4/5/6/7..
Dimensions [mm]
ValveFunction A B C D E F G H J K L M Weight
approx. [kg]
BA4.. 123.2 22.2 41.1 3.3 15.8 24.4 84.5 73.6 18.0 — 38.0 M3x12 deep 0.270
BB4.. 179.4 22.2 41.1 3.3 15.8 24.4 103.6 81.7 18.0 — — M3x12 deep 0.420
BB5/6/7.. 190.0 22.2 41.1 3.3 15.8 24.4 114.0 92.2 18.0 — — M3x12 deep 0.440
PA4.. — 22.2 41.1 3.3 15.8 24.4 — 2.2 18.0 75.8 83.8 M3x12 deep 0.190
PP4/5/6/7.. 91.6 22.2 41.1 3.3 15.8 24.4 75.7 2.2 18.0 — — M3x12 deep 0.210
Attention: Use fi ttings only to max. 14 mm wrench size.
External pressure port for BA-/BB-valves in M5
Pilot tubing port for PA/PP-valves in 1/8
Single or Dual Air Pilot Actuated Directional ValvesPort Size 1/8 or 1/4
L11 / L12PA4...L11 / L12PP4/5/6/7...
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05 499
L2 Series • DimensionsSingle or Dual Solenoid Pilot Actuated ValvesPort Size 1/4 or 3/8
L22 / L23BA452...
L22 / L23 BB4/5/6/752...Single or Dual Air Pilot Actuated ValvesPort Size 1/4 or 3/8
L22 / L23PA4...L22 / L23PP4/5/6/7... L22 / L23JA4...
L22 / L23JJ4/5/6/7...Dimensions [mm]
ValveFunction A B C D E F G H J K L M N P Q Weight
[kg]
BA4.. 136.6 25.4 50.8 54.5 4.3 32.3 22.2 19.0 99.0 89.7 47.0 2.1 — — M4x7.5 deep 0.390
BB4.. 193.5 25.4 50.8 54.5 4.3 32.3 22.2 19.0 117.5 99.0 90.2 2.1 52.2 42.9 M4x7.5 deep 0.550
BB5/6/7.. 206.6 25.4 50.8 54.5 4.3 32.3 22.2 19.0 130.6 111.9 103.3 2.1 65.3 56.0 M4x7.5 deep 0.600
PA4.. — 25.4 50.8 32.3 4.3 — 22.2 19.0 — 89.7 97.8 2.1 — — M4x7.5 deep 0.290
PP4/5/6/7.. 101.5 25.4 50.8 32.3 4.3 — 22.2 19.0 85.7 — — 2.1 — — M4x7.5 deep 0.310
JA4.. — 25.4 50.8 32.3 4.3 — 22.2 19.0 — 89.7 97.8 2.1 115.8 — M4x7.5 deep 0.300
JJ4/5/6/7.. 137.5 25.4 50.8 32.3 4.3 101.5 22.2 19.0 85.7 — — 2.1 — — M4x7.5 deep 0.320
Attention: Use fi ttings only to max. 19 mm wrench size.
External pressure port for BA-/BB-valves in 1/8
Pilot tubing port for PA/PP-valves in 1/8
L22 BA4 52 T
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05 500
SolenoidType
0 = 24/110/230 VACsolenoid to industrial formtype 22 mm
A = 24/110/230 VAC or 24 VDCsolenoid to DIN EN 175301-803 (old DIN 43650) form B, type 22 mm
B = 24 VDCsolenoid to industrial formtype 22 mm
T = 24 VDCsolenoid to ISO 20401 with M12connector and LED,type 22 mm
7 = 24 VDCsolenoid withDESINA standard connector M12, with LED, type 22 mm
C =solenoid to industrial form, type 22 mm withUL- and CSA-approval
2 = ACsolenoid to DIN EN 175301-803 (old DIN 43650) form A type 30 mm
4 = DCsolenoid to DIN EN 175301-803 (old DIN 43650) form A type 30 mm
L1 / L2 Series with Exchangeable Pilot Coil • OverviewHow to order: (example)
Solenoid type 22 mmFast-on connectors to industrial formalso with UL- and CSA-approvalSolenoid can be rotated by 45°
Solenoid type 22 mmwith M12-Stecker and LED orDESINA standard connector M12 and LEDSolenoid can be rotated by 45°
ValveSeries
PortType
Version
L11 = 1/8 Aluminium
L12 = 1/4 Aluminium
L22 = 1/4 Aluminium
L23 = 3/8 Aluminium
Technical Data
5-ported, 2- or 3-position valves, solenoid pilot actuatedPort size: L11/L12 series = 1/8 or 1/4 L22L23 series = 1/4 or 3/8
Flow capacity: L11/L12 series = 1000 Nl/min = CV 1.0 L22/L23 series = 1700 Nl/min = CV 1.7
Operating pressure: Vacuum to 10 bar; optional = to 16 bar; with external pilot supply = vacuum to 21 bar
Pilot pressure range: 1 to 10 bar (up to 16 bar upon request)
Voltage: 24 VDC ± 10% 24 V, - 110 V, - 230 V, 50-60 Hz ± 10%
Power input: 4.8 W 10/7 VA
Response Times [ms]Single actuated (5-port, 2-pos.) energise 10 de-energise 35 energise 7 de-energise 35
Dual actuated (5-port, 2-pos.) energise 10 — energise 7 —
Dual actuated (5-port, 3-pos.) energise 10 de-energise 35 energise 7 de-energise 35
MaterialBody: Aluminium alloy
Other Parts: Stainless steel, steel, aluminium alloy or plastic
Static Seals: NBR
Finish: Anodized and varnished
Note: For conversion to external pilot supply please refer to page 531
ValveMounting
52 = Line mounted
ValveFunction
BA4 =
BB4 =
BB5 =
BB6 =
BB7 =
Solenoid type 22 mmFast-on connectors to DIN EN 175301-803 (old DIN 43650) form BSolenoid can be rotated by 45°
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05 501
Q A02 61
L1 / L2 Series with Exchangeable Pilot Coil • Overview
Version
Q = Mounted with adapter for exchangeable pilot coil and G-thread
P = Mounted with adapter for exchangeable pilot coil and NPTF-thread
Voltage
61 = 24 VDC ± 10%
40 = 230 VAC/50-60 Hz ± 10%
30 = 110 VAC/50-60 Hz ± 10%
20 = 24 VAC/50-60 Hz ± 10%
Order example: L22BA452TQ00061
This refers to a L2 series single solenoid pilot actuated 5-ported, 2-position directional valve with exchangeable pilot coil and spring return. Port size of the valve G 1/4. Internal pilot supply is standard.The solenoid to ISO 20401 has a M12 connector and LED and is type 22 mm. It is intended for an operating voltage of 24 VDC.
Optionen
000* = Exchangeable pilot coil with manual overrde push/locking
14A = Version for external pilot air
17P = Non-locking manual override
Q16 = As 3-port., 2-pos. valve, NC (normally closed)
R16 = As 3-port., 2-pos. valveNO (normally open)
17G = Low wattage: 1.2 W (up to max. 8 bar) in DC only
* manual override acting on pilot valveMore options on request
S22 BA4 52
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05 502
S2 Series with Exchangeable Pilot Coil and Stainless Steel Body • OverviewHow to order: (example)
Valve Series
PortType
Version
S22 = 1/4 stainless steel316
ValveMounting
52 = Line mounted
Technical Data
5-ported, 2- or 3-position valves, solenoid pilot actuaedPort size: S22 series = 1/4
Flow capacity S22 series = 1700 Nl/min = CV 1.7
Operating pressure Vacuum to 10 bar; optional = to 16 bar; with external pilot supply = vacuum to 21 bar
Pilot pressure range 1 to 10 bar (upon request up to 16 bar)
Voltage: 24 VDC ± 10% 24 V, - 110 V,- 230 V, 50-60 Hz ± 10%
Power input: 4.8 W 10/7 VA
Response Times [ms]Single actuated (5-port./2-pos.) energise 10 de-energise 35 energise 7 de-energise 35
Dual actuated (5-port./2-pos.) energise 10 — energise 7 —
Dual actuated (5-port./3-pos.) energise 10 de-energise 35 energise 7 de-energise 35
MaterialBody: Stainless steel 316
Other Parts: Stainless steel, steel, aluminium alloy or plastic
Static Seals: NBR
Finish: without
Note: For conversion to external pilot supply please refer to page 531
solenoid actuated valve (BA... BB...)
air pilot actuated valvew/o manual override
(PA... PP...)
ValveFunction
BA4 =
BB4 =
BB5 =
BB6 =
BB7 =
PA4 =
PP4 =
PP5 =
PP6 =
PP7 =
On request:3-port./2-pos. NO- or NC-version
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05 503
SolenoidType
0 = Air pilot actuatedPA / PP-valves
0 = 24/110/230 VACsolenoid to industrial formtype 22 mm
A = 24/110/230 VAC or 24 VDCsolenoid to DIN EN 175301-803 (old DIN 43650), form B, type 22 mm
B = 24 VDCsolenoid to industrial formtype 22 mm
T = 24 VDCsolenoid to ISO 20401 with M12 connector andLED, type 22 mm
7 = 24 VDCsolenoid with DESINA standardconnector M12with LED, type 22 mm
C = 24/110/230 VAC or 24 solenoid to industrial form, type 22 mm, withUL and CSA approval
2 = ACsolenoid to DIN EN 175301-803 (old DIN 43650)form A , type 30 mm
4 = DCsolenoid to DIN EN 175301-803 (old DIN 43650) form A, type 30 mm
Order example: S22BA452TQ00061
This refers to a S2 series single solenoid pilot actuated 5-ported, 2-position valve with exchangeable pilot coil and spring return, stainless steel body. Port size of the valve is G 1/4. Internal pilot supply and manual override push/locking are standard. The solenoid to ISO 20401 has a M12 connector and LED and is type 22 mm. It is intended for an operating voltage of 24 VDC.
S2 Series with Exchangeable Pilot Coil and Stainless Steel Body • Overview
T Q 000 61
Version
Q = Mounted with adapterfor exchangeable pilot coil and G-threadBA / BB-valves
Q = Air pilot actuated and G-threadPA / PP / JA / JJ-valves
P = Mounted with adapter for exchangeable pilot coil and NPTF-threadBA / BB-valves
P = Air pilot actuated andNPTF-threadPA / PP / JA / JJ-valves
Voltage
61 = 24 VDC ± 10%
40 = 230 VAC/50-60 Hz ± 10%
30 = 110 VAC/50-60 Hz ± 10%
20 = 24 VAC/50-60 Hz ± 10%
00 = Air pilot actuated
Optionen
000* = Exchangeable pilot coil with manual overrde push/locking
14A = Version for external pilot air
17P = Non-locking manual override
Q16 = As 3-port., 2-pos. valve, NC (normally closed)
R16 = As 3-port., 2-pos. valveNO (normally open)
17G = Low wattage: 1.2 W (up to max. 8 bar) in DC only
* manual override acting on pilot valveMore options on request
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05504
L1/L2 Series with Exchangeable Pilot Coil • S2 Series Stainless Steel Version • DimensionsSingle or Dual Solenoid Pilot Actuated Directional Valves
L11 / L12BA452.Q......L22 / L23BA452.Q......S22BA452.Q......
L11 / L12 BB452.Q......L22 / L23 BB452.Q......S22BB452.Q......orL11 / L12 BB5/6/752.Q......L22 / L23 BB5/6/752.Q......S22BB5/6/752.Q......
Drawing shows S22BA452BQ00061
Dimensions [mm]
Series Function A B C D E F G HWeight approx. [kg]
L1/L2 Series S2 SeriesL1 BA4 133.0 22.2 41.1 M3x12 deep 3.3 24.4 18.0 18.0 0.270 —
L1 BB4 197.5 22.2 41.1 M3x12 deep 3.3 24.4 18.0 18.0 0.420 —
L1 BB5/6/7 208.0 22.2 41.1 M3x12 deep 3.3 24.4 18.0 18.0 0.440 —
L2/S2 BA4 148.0 25.4 50.8 M4x8 deep 4.3 32.3 22.2 19.0 0.390 0.960
L2/S2 BB4 214.0 25.4 50.8 M4x8 deep 4.3 32.3 22.2 19.0 0.550 1.300
L2/S2 BB5/6/7 225.5 25.4 50.8 M4x8 deep 4.3 32.3 22.2 19.0 0.600 1.460
Attention: Use fi ttings only to max. wrench size of 14 mm (L1 series) or max. wrench size 19 mm (L2 / S2 series).
External pressure supply for BA / BB- valves in M5
Drawing shows S22BB552BQ00061
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05 505
S2 Series Stainless Steel Version • DimensionsSingle or Dual Air Pilot Actuated Valves
S22PA4520Q00000 S22PP4/5/6/7520Q00000
Drawing shows S22PP5520Q00000
Pilot tubing port
Dimensions [mm]
Series Function A B C D E F G H Weightapprox. [kg]
S2 PA4 98.0 25.4 50.8 M4x8 deep 4.3 32.3 22.2 19.9 0.700
S2 PP4/5/6/7 102.0 25.4 50.8 M4x8 deep 4.3 32.3 22.2 19.9 0.760
Attention: Use fi ttings only to max. wrench size of 19 mm.
Pilot tubing port for PA / PP-valves in M5
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05506
Manifolds for Front Mounting, Port Size G 1/4
Accessories (without picture)
Manifolds and Accessories • L1 Series
Dimensions [mm]
Station A B C D E F G H J K L Weightapprox. [kg]
OrderCode
2 88.5 78.5 0.410 106-540
3 119.0 109.0 0.550 106-541
4 149.5 139.5 0.690 106-542
5 180.0 170.0 0.830 106-543
6 210.5 200.5 0.970 106-544
7 241.0 231.0 70.6 36.0 21.0 30.5 35.5 22.0 11.0 5.3 42.0 1.120 106-545
8 271.5 261.5 1.260 106-546
9 302.0 292.0 1.400 106-547
10 332.5 322.5 1.540 106-548
11 363.0 353.0 1.680 106-549
12 393.5 383.5 1.820 106-550
Note: Valves can only be mounted on manifold with adapter plate 239-311.
On request: NPTF-thread
Dimensions [mm]
Description Application Length Width Height Weightapprox. [kg]
OrderCode
Adapter plate* 1 plate per station 59.2 22.1 5.6 0.020 239-311
Blank station plate only manifold front mounting 59.2 22.1 11.9 0.040 239-288
Blocking plug to separate gallery "1" — — — — 20.5499
Blocking screws G 1/4
to close ports "1" and/or "3" & "5" — — — — N411-001
* Incl. screws and gaskets
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05 507
Manifolds and Accessories • L2 Series Manifolds for Front Mounting, Port Size G 3/8
Manifolds for Rear Mounting, Port Size G 3/8
Dimensions [mm]
Station A B C D E F G H J K Weightapprox. [kg]
OrderCode
2 105.4 67.0 0.410 106-715
3 137.4 99.4 0.540 106-716
4 169.4 131.4 0.670 106-717
5 201.4 163.4 0.800 106-718
6 233.4 195.4 0.939 106-719
7 265.4 255.4 70.5 63.4 44.4 32.0 30.6 212.4 4.1 22.2 1.060 106-720
8 297.4 259.4 1.190 106-721
9 329.4 291.4 1.320 106-722
10 361.4 323.4 1.450 106-723
11 393.4 355.4 1.580 106-724
12 425.4 387.4 1.710 106-725
Note: Valves can only be mounted on th manifold with adapter plate 239-312.
On request: NPTF-thread
Dimensions [mm]
Station A B C D E F G H J K Weightapprox. [kg]
OrderCode
2 99.6 61.0 0.360 229-979
3 127.7 87.1 0.460 229-980
4 151.9 113.3 0.560 229-981
5 178.1 139.4 0.660 229-982
6 204.2 165.6 0.750 229-983
7 230.4 191.8 70.5 63.4 44.4 26.2 28.7 11.4 4.1 22.2 0.850 229-984
8 256.5 217.9 0.950 229-985
9 282.7 244.1 1.050 229-986
10 308.9 270.3 1.140 229-987
11 335.0 296.4 1.240 229-988
12 361.2 322.6 1.340 229-989
Incl. screws and gaskets
On request: NPTF-thread
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05508
Accessories (without picture)
Manifolds and Accessories • L2 Series
Valve Isolating Plates, to Lock Port 1allow to replace valves without depressurizing the system
Manifolds in P Gallery Version, Port Size G 3/8
Dimensions [mm]
Station A B C D E F G H Weightapprox. [kg]
OrderCode
2 99.6 61.0 0.110 229-957
3 127.7 87.1 0.140 229-958
4 151.9 113.3 0.170 229-959
5 178.1 139.4 0.200 229-960
6 204.2 165.6 0.230 229-961
7 230.4 191.8 19.0 26.2 4.1 22.9 24.6 11.4 0.260 229-962
8 256.5 217.9 0.290 229-963
9 282.7 244.1 0.330 229-964
10 308.9 270.3 0.360 229-965
11 335.0 296.4 0.390 229-966
12 361.2 322.6 0.420 229-967
Incl. screws and gaskets
On request: NPTF-thread
Dimensions [mm]
Description A B C D E F Weightapprox. [kg]
OrderCode
Valve isolating plate*
72.0 70.1 38.1 25.4 20.0 10.0 0.150 10.6445
Incl. screws and gaskets (1 plate per station)
* Note: Does not seal hermetically. Only for exchange of valves.
Dimensions [mm]
Description Application Length Width Height Weightapprox. [kg]
OrderCode
Adaptor plate* 1 plate per stationonly manifold front mounting
70.1 25.4 7.14 0.020 239-312
Blank station plate* only manifold front mounting 70.1 25.4 13.5 0.050 239-471
Blank station plate* only manifold rear mounting 71.1 25.4 6.35 0.030 229-991
Blank station plate* only manifold P version 25.4 24.6 6.35 0.020 229-990
Sandwich speed control* only manifold front und rear mounting
— — — 0.080 239-209
Blocking plug to separate gallery "1", "3" & "5" — — — — 20.5499
Blocking screwsG 3/8
to close ports "1" and/or "3" & "5"
— — — — N411-002
* Incl. screws and gaskets
Line-Mounted Valves L Series
www.numatics.com
Valv
es
Sub
ject
to c
hang
e w
ithou
t not
ice.
Not
liab
le fo
r prin
ting
erro
rs
Pneumatic-Catalogue-GB-09/05 509
Completely Assembled Manifolds • L1 / L2 Series
How to order: (example)
AKL 33A — 06
Order example: 1. Mounting kit AKL33A—062. Valve Station 1 = L23BA452AG00061
Station 2 = L23BA452AG00061 Station 3 = L23PA4520G00000 10.6445 Station 4 = L23BB452AG00061 Station 5 = L23BB552AG00061 239-209 Station 6 = 239-471 ASSEMBLED
All valves of L1 / L2 series and L1 / L2 series with exchangeable pilot coil are also available as completely assembled manifolds. The valves are listed from left to right. (please refer to order example)More than 12 stations are not recommended, as the fl ow rate would be too low.
Manifold Mounting Kit
AKL = Completely assembled manifold
Numberof stations
02 = 2 stations
03 = 3 stations
04 = 4 stations
05 = 5 stations
06 = 6 stations
07 = 7 stations
08 = 8 stations
09 = 9 stations
10 = 10 stations
11 = 11 stations
12 = 12 stations
PortType
12A = L1 series; manifold for front mountingwith port thread in G 1/4 (incl. adapter plate)
33 = L2 series;manifold for rear mounting with port thread in G 3/8
33A = L2 series; manifold for front mounting with port thread in G 3/8 (incl. adapter plate)
31 = L2 series;manifold in P version, port thread in G 3/8
Station 6Blank station plate
(239-471)
Station 5Dual solenoid pilot actuated 5-ported, 3-position valves
(L23BB552AG00061)sandwich speed control
(239-209)
Station 4Dual solenoid pilot actuated 5-ported, 2-position valves
(L23BB452AG00061)
Station 3single air pilot actuated
5-ported, 2-position valves(L23PA4520G00000)
Valve isolating plate (10.6445)
Station 1 and 2Single solenoid pilot actuated
5-ported, 2-position valves(L23BA452AG00061)