Post on 11-Jul-2020
transcript
DO NOT SCALE DRAWING
55752D
CHKDRNDATEE. N.DESCRIPTIONLTR
REVISIONS
THIS PRINT SUPERSEDES ANY EARLIER DATE; DESTROY SAME
REVISE ONLY ON Pro/E SYSTEM
FRACTIONAL
ANGULAR
±
±
.XXX= ±
.XX= ±
DECIMAL
TOLERANCES
DIMENSIONS ARE IN INCHESUNLESS OTHERWISE SPECIFIED:
FINISH:
MATERIAL:
FIRST USED ONNEXT ASSY
APPLICATION
DATE
DESIGN
CHECK
DRAWN
QUANTITY REQDNUMBER
PARTDESCRIPTION
PARTS LIST
NO.
ITEM
TITLE
OFSHEETDRAWING DATESCALE
REVDWG. NO.CODE IDENT NO.SIZE
HOLLY SPRINGS, MS 38635805 NORTH WEST STREETRACOR DIVISIONPARKER HANNIFIN CORPORATION
REF.21.6
REF.8.8
REF..5
REF.1.4
REF.3.2
REF.3.9
REF.8.1
REF.5.5
REF.6.9
REF.1.1
REF.6.5
REF.2.1
REF.7.5
REF.24.4
REF.11.6
REF.17.3
JKNJKN05181200305REMOVED 73308 & 73301001E
1 20.375
.1
.06 1.030 WHITE POWDER COAT EDFBO-14-MA
DUAL FBO MARINE FILTER ASM56014PROD CODE
THIS PRINT AND ALL INFORMATIONTHEREIN IS OUR PROPERTY, ISCONFIDENTIAL AND MUST NOT BEMADE PUBLIC OR COPIED UNLESSAUTHORIZED BY US. THIS PRINTIS SUBJECT TO RETURN ON DEMAND.
112410ACS070811JKN112410ACS
1DUAL FBO MARINE CASTING ASM (WHITE)7330100012FBO BOWL ASSY - 14" - WHITE7315523SPRING .135 SS 1.545 ID X 1.8757236824O-RING .210 VITON 6.225 ID 2-362OV-13251/2" NPT HEX HEAD PLUG2302046VALVE BALL .50 STAINLESS STEEL73350-.527FBO-14 COAL/SEP KITFBO 60338P28VACUUM GAUGE 7331419WARNING LABEL732402
10UNIT LABEL72731211 10-32 X 3/8 SLOTTED HEX HEAD MACHINE SCREW73307212PACKAGING CRATE ASM73310113OPERATION MANUAL (PUT IN CRATE)733091
WIP
Lev
9V
erR
ev
NOTES:1. LUBE O-RING BEFORE ASSEMBLY W/PETROLEUM JELLY OR VASELINE2. ALL METAL FITTINGS SHOULD BE ASSEMBLED USING THREAD SEALANT LOCTITE 567 OR EQUIVALENT.3. LEAK TEST WITH AIR TO 80 PSIG +/-24. PLACE BROCHURE #73309 IN PLASTIC BAG WITH DRAIN VALVE ANDTHEN PLACE INTO SHIPPING CARTON6. TORQUE SCREWS AT 20 IN-LB (ITEM 8).7. COMPLETE UNIT WEIGHS APPROX. 85#8. CASTING HEAD & FLANGE POWDER COAT MARINE WHITE9. BOWLS POWDER COAT MARINE WHITE10. PART #73301000 INCLUDES CASTING HEAD, 2 FLANGES #73301001AND (6) BOLTS #73308.
PLACE LABELSAS SHOWN
E
D23020 PLUGS TO BE INSTALLED HAND TIGHTEN THEN TIGHTEN 2-3 MORE TURNS WITH WRENCH. USE THREAD SEALANT
D
34
1
2
6
DRAIN VALVES TO BE INSTALLED HAND TIGHTEN THEN TIGHTEN 2-3 MORE TURNS WITH WRENCH. USE THREAD SEALANT
7
VACUUM GAUGE TO BE INSTALLED WITH FACE POINTING TOWARDS FRONT AS SHOWNHAND TIGHTEN THEN TIGHTEN 2-3 MORE TURNSWITH WRENCH. USE THREAD SEALANT
9
10
8
5
TORQUE BOLTS TO FLANGE AT 30 FT-LBS +/- 2
INLET/OUTLET THREADS 1" NPT FEMALE
.65 HOLE
11
DO NOT SCALE DRAWING
55752D
CHKDRNDATEE. N.DESCRIPTIONLTR
REVISIONS
THIS PRINT SUPERSEDES ANY EARLIER DATE; DESTROY SAME
REVISE ONLY ON Pro/E SYSTEM
FRACTIONAL
ANGULAR
±
±
.XXX= ±
.XX= ±
DECIMAL
TOLERANCES
DIMENSIONS ARE IN INCHESUNLESS OTHERWISE SPECIFIED:
FINISH:
MATERIAL:
FIRST USED ONNEXT ASSY
APPLICATION
DATE
DESIGN
CHECK
DRAWN
QUANTITY REQDNUMBER
PARTDESCRIPTION
PARTS LIST
NO.
ITEM
TITLE
OFSHEETDRAWING DATESCALE
REVDWG. NO.CODE IDENT NO.SIZE
HOLLY SPRINGS, MS 38635805 NORTH WEST STREETRACOR DIVISIONPARKER HANNIFIN CORPORATION
JNJN05181200305SEE SHEET 1 FOR DETAILSE
2 20.375
.010 .5.005 EDFBO-14-MA
DUAL FBO MARINE FILTER ASM
THIS PRINT AND ALL INFORMATIONTHEREIN IS OUR PROPERTY, ISCONFIDENTIAL AND MUST NOT BEMADE PUBLIC OR COPIED UNLESSAUTHORIZED BY US. THIS PRINTIS SUBJECT TO RETURN ON DEMAND.
070811JKN070811JKN112410ACS
WIP
Lev
9V
erR
ev
NOTES:1. USE (2) M8 X 2 3/4" HEX LAG BOLTS AND WASHERS TO ATTACH DFBO TO CRATE.2. PARTICLEBOARD SHEET TO SIT ON TOP OF CRATE AS SHOWN3. TAPE FLAPS CLOSED4. USE 6" X 4" THERMAL TRANSFER LABELON OUTSIDE OF CARTON5. WAREHOUSE/SHIPPING TO BAND BOX TO PALLET
SCALE 0.250
12
13