Post on 21-Mar-2020
transcript
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 1/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
buerkle.brandon@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 2/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 3/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 4/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 5/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 6/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
jbonner919@hotmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 7/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 8/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 9/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
For me it was the stupid static and dynamic questions. I did great with everything else.
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 10/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 11/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
ray@dailyinst.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 12/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 13/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 14/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 15/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 16/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
bpfergu@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 17/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 18/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 19/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 20/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 21/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
notgivingmyrealemail@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 22/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 23/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 24/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 25/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 26/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
josh.dudeck@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 27/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 28/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 29/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 30/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 31/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
hegn0015@umn.edu
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 32/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 33/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 34/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 35/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 36/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
anon@anon.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 37/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 38/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 39/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 40/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 41/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
alexrodela90@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 42/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 43/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 44/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 45/130
I was surprised by some of the topics that were covered in both the morning and afternoon section. If I didn't �nd the right information by luck, I would not have been able to answer several of the questions.
This content is neither created nor endorsed by Google.
Additional Comments? Words of advice?
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 46/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
wrsorensen12@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 47/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other: Dictionary
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 48/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 49/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 50/130
This content is neither created nor endorsed by Google.
Additional Comments? Words of advice?
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 51/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
rdsouders10@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 52/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 53/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 54/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 55/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 56/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
josselines2@aol.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 57/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 58/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 59/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 60/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 61/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
ugothdragonslayer@hotmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 62/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 63/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 64/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 65/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 66/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
hegn0015@umn.edu
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 67/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 68/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 69/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 70/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 71/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
boenimic@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 72/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 73/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 74/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 75/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 76/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
jmeeh21@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 77/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 78/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 79/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 80/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 81/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
notgivingmyrealemail@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 82/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 83/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 84/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 85/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 86/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
richardnickle@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 87/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other: Mechanical Engineering Dictionary
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 88/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 89/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 90/130
This content is neither created nor endorsed by Google.
Additional Comments? Words of advice?
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 91/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
hegn0015@umn.edu
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 92/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 93/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 94/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 95/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 96/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
lawrence@baitland.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 97/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 98/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 99/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 100/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 101/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
josh.dudeck@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 102/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 103/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 104/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 105/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 106/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
buerkle.brandon@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 107/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 108/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 109/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 110/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 111/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
Lawrence@baitland.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 112/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 113/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 114/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 115/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 116/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
jxsnyder@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 117/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 118/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 119/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 120/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 121/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
jkuker@amarillogear.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 122/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 123/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 124/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 125/130
This content is neither created nor endorsed by Google.
Forms
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 126/130
Machine Design & Materials PE Exam Survey - April 2017
A survey that gauges your level of preparedness and compares this level with your total number of study hours and references used during the exam.
sdf@gmail.com
Untitled Title
Option 1
Yes
No
Yes, this is my �rst time taking the PE exam.
No. 2nd time.
No. I have taken the exam more than 2 times.
Email address *
Did you pass the exam? *
If you did not pass, what was your score out of 80?
Is this your �rst time taking the exam?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 127/130
0 to 100 hours.
101 to 200 hours.
201 to 300 hours.
301 to 400 hours.
401 to 500 hours.
More than 501 hours.
Personal study notes and cheat sheets.
NCEES Machine Design & Materials sample PE exam.
College Machine Design Book (Shigleys)
College Materials Book
MERM - Mechanical Book
MERM - MDM Book
MERM - Practice Exam
6 Minute Solutions - Practice Exam
PPI Engineering Unit Conversions
Machinery's Handbook
EMJ Blue Book
Roark
Other:
How many hours did you study for this exam?
Which references would you recommend for the exam? *
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 128/130
2 to 3 years
3 to 4 years
4 to 5 years
More than 5 years
Other:
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
Extremely con�dent (I feel that I knew the correct answers to nearly all of the questionsand guessed on less than 5 questions).
Very con�dent (I feel that I knew the correct answers to most of the questions andguessed on not more than 10 questions).
Con�dent (I feel con�dent that I guessed on not more than 15 questions).
Not as con�dent (I guessed on more than 15 questions).
How many years of engineering experience do you have at the time of theexam in the �elds tested by the exam?
How con�dent are you in your performance on the AM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
How con�dent are you in your performance on the PM exam? Guessing isde�ned as not knowing the exact answer (choosing between 2 or more ofthe solutions).
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 129/130
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
Basic Engineering Practice
Engineering Science & Mechanics
Material Properties
Strength of Materials
Vibration
Mechanical Components
Joints & Fasteners
Supportive Knowledge
What were your most con�dent topics? Select 3.
What were your least con�dent topics? Select 3.
Additional Comments? Words of advice?
5/29/2018 Machine Design & Materials PE Exam Survey - April 2017
https://docs.google.com/forms/d/142b5NTyN12v7YShFfFOUXerK8amhBVbgiDg0oon1xZg/edit#responses 130/130
This content is neither created nor endorsed by Google.
Forms