Post on 12-Apr-2017
transcript
We Are:
• MacLog Solutions represents foreign companies
specializing in the Oil and Gas Drilling Equipment and
Services, facilitating the dialogue between our foreign
partners and the South American market, always seeking to
offer the best Solutions to our Customers.
• MacLog Solutions covers the South American market,
supplying Drilling Equipment and Services for the Oil and
Gas Industry (Land & Offshore – E&P).
We Represent: • Lee C. Moore (LCM) is dedicated to providing high-quality Land and
Offshore Oil & Gas drilling equipment to customers all over the
world, for over 100 years
• Lee C. Moore brand is a landmark in the industry, with over 4000
Cantilever Masts and over 500 Offshore Derricks built since 1907
• LCM also offers worldwide Field Services for all Makes and Models
of drilling structures. LCM’s Technicians specialize in API RP 4g
Category III & IV Inspections, Recertification, Emergency Repairs,
Upgrades and Equipment Installation
Lee C. Moore’s Products & Services
• Derricks, Masts & Substructures • Structural Design, Analysis & 3D Modeling • Rig Moving Systems & Transportation Dollies • BOP Handling Systems • Structural Engineering & Modification • Field Services & Training • API Inspection and Recertification
The name behind more than 100 years of oilfield innovation and experience is dedicated to providing high-quality design and fabrication of oil and gas drilling equipment to customers worldwide:
Lee C. Moore’s
HMR II
Lee C. Moore’s
SLOT BOX DESIGN
142’ x 23’ Hydraulic Raised Cantilever HMR 600K
Mast with static hook capacity of 600,000 lbs. per
API Standard 4F 3rd edition, PSL-1 with ten (10)
lines strung to the traveling block with Box on Box
Substructure designed to facilitate fast rig moves
with minimal disassembly and rig-up. Mast and
substructure designed for assembly with cranes.
Mast and substructure move in seven (7) primary
loads with transport design limits as follows:
Overall Width: 12’-0”
Overall Height: 11’-0”
Maximum Lift: 75,000 lbs.
Lee C. Moore’s
“xS Mast” Features:
Benefits:
• Innovative hydraulic jacking system for scoping mast
• Minimum crew for raising / lowering – approximately 5
• Maximized drill floor area
• Integrated skidding systems for multi-well capability
• Industry proven component design
• Variety of packaged options, capacities & accessories
• Wide (30 ft) base mast for enhanced safe working area around rotary
table
• Unobstructed driller visibility to crown
• Multi-functional system
• Integrated scoping system
• Low rig up time
• Light weight
• Small footprint
• Range of rig capacity - 750k – 1,500k
Lee C. Moore’s
BOP Handling System
Lee C. Moore’s
Rig Rover System™
Fast, Safe, Versatility & Easy
Multidirectional
Interchangeability
Pinned Installation
Moves with full setback
Designed for Pad Drilling
More wells drilled
Eliminates rig down time
Decreased truck traffic
Controlled operation
We Represent: • Swanson Industries is a worldwide supplier of hydraulic, machining
and plating services with expertise in designing and manufacturing
new products; remanufacturing and repairing components;
engineering; and distribution of certified products.
• Swanson Industries is certified to design and manufacture large-
bore long-stroke hydraulic cylinders to comply with engineering
standards set by the American Bureau of Shipping (ABS) and DNV.
• Long-Stroke Large-Bore Cylinders
• Motion-Compensator Cylinders
• Production and Drilling Riser Cylinders
• Double-Ended Cylinders
• Double-Acting Cylinders
• Single-Acting Plunger Cylinders
• CMC Cylinders
• Wireline Tensioner Cylinders
Swanson’s Products
We Represent: • Omron Oilfield & Marine was the first company to equip and deploy AC drives and
controls on AC land rigs in large production quantities. And we were the first company to provide Variable Frequency Drives on top drives. While we’re proud of these technological innovations for more than 40 years, we remain focused on continuing to innovate the way the world drills.
• Integration of the latest AC drive & PLC technology provides the backbone for Omron Land Drilling Systems.
• Omron’s control houses are the center of rig intelligence by regulating and controlling all electrically actuated drilling equipment.
• The rig control software is embedded within the PLC structure, to synchronize all drilling functions as well as performing top level control automated functions (auto-drilling, mud pump synchronization and pump pulsation pressure limiting, etc.).
• Automated Drilling Systems • Driller’s Cabins • Power Houses • Third-party Integration • Services • Customer Training
Omron’s Products & Services
We Represent:
• Eneroil Offshore Drilling is one of the world’s leading cementing products manufacturer, supplying its cementing products.
• Eneroil manufactures wide range of cementing equipment conforming to API 10D specifications under license from American Petroleum Institute.
• Eneroil has Distributors in more than 25 countries, supplying its cementing products to Oil & Gas Majors, such as Schlumberger, Halliburton, Baker Hughes, Saudi Aramco, Petronas, Total, Occidental and Murphy.
• Main Products: Casing Centralizers, Float Equipment, Cementing Plugs
We Represent: • Logan Oil Tools has decades of experience manufacturing a
complete line of Fishing Tools, Power Swivels and related products, delivered to many of the largest fishing and rental tool companies around the world
Logan Manufactures
• Overshots
• Spears
• Taper Taps
• Die Collars
• Junk Baskets
• Junk Subs
• Fishing Magnets
• Ditch Magnets
• Safety Joints
• Hydraulic Fishing Jars
• Jar Energizers and Intensifiers
• Fishing Bumper Subs
• Hydraulic and Mechanical
External Cutters
• Hydraulic and Mechanical
Internal Cutters
• Casing Rollers
• Casing Scrapers
• A full line of Casing Patches, and
• Power Swivels
Logan’s
Products
Retrieving Tools
Overshots Spears Junk Baskets
Stroking Tools
Jars and Energizers Coiled Tubing Tools
Remedial Tools
Casing Patches Cutters
Power Swivels
Logan’s Products
• The Logan Sup-R-Jar is a double-
acting hydraulic drilling jar.
• Logan Sup-R-Jar hits harder, last
longer, can be run in both tension and
compression, and can be run in all
types of wells.
• The Logan Sup-R-Jar is suitable for:
• Straight Hole
• Directional Hole
• Fishing
• Workover
The Xciter is a user-friendly tool that is added to
the bottom hole assembly (BHA) to enhance slide
and rotary drilling performance under the most
challenging of wellbore conditions.
A variable frequency excites the drill string to
break static friction in the build and horizontal
sections of the well. Amplitude and frequency
control are achieved by changing flow
configuration within the tool.
Positive Effects of the Xciter:
• Increases ROP while sliding
• Enhances ability to achieve desired build rates
• Better control of WOB results in extended bit
life
• Enhances tool face control results in reduction
of orienting time
• Increases rig efficiency (fewer trips to swap
pipe or change worn bits
• Facilitates success in drilling longer horizontal
sections
Logan Sup-R-Jar
Logan Xciter
Logan’s Products
Logan’s MultiStim Fracture Isolation System
Logan’s MultiStim Fracture Isolation System is especially designed for multi-stage fracs. This
innovative, proprietary multi-stage completion technology features valves with fully retrievable
seats post-fracturing via threaded tubing, without milling or drilling!
Applications
• Extended reach horizontal wells
• Open-hole and cased-hole horizontal and vertical wells
• Sandstone, carbonate, shale, coal, and naturally fractured formations
Features
• Ball seats can be removed in a single run without milling or drilling
• Sleeves can be selectively opened and closed for post fracture control
• Stimulation of the entire wellbore can be customized throughout the life of the well
• Cementing, or plugging and perforating is not required
• Fully covers extended-reach horizontal wells
• Fractures can be controlled from toe to heel for selective fracturing and producing
• One-trip installation for faster completion times
Logan’s Products
Logan Kline Tools has been a leading manufacturer of
downhole tools for the Well Servicing Industry for more
than 30 years.
Logan Kline Tools manufacture a wide variety of
specialized oilfield equipment to meet your well
servicing needs:
•K-Frac Fracturing Liner Systems
•Packers
•Tubing Anchors
•Scab Liner Assemblies
•Bridge Plugs
•Tubing Swivels
•Retrieving Tools
•Unloading Valves
•Collar Locators
Logan Kline Tools
We Represent: • Triflo International has been providing Solids Control Equipment
since 1979, with a dedicated commitment to meeting the fluid processing needs of Contractors and Operators worldwide.
• Through design expertise and manufacturing know-how, Triflo have developed a line of high-quality products, such as:
– Oilfield Mud Systems (Land & Offshore)
– Trenchless Mud Systems
– Solids Control Equipment
– Custom Equipment Manufacturing
We Represent: • With over 50 years experience supplying Naval Defence and
Industrial Markets world-wide, Hale Hamilton is synonymous with “Excellence in Pressure and Flow Control”.
• Hale Hamilton specializes in High Pressure Control Valves and Bespoke Control Systems for the control and switching of air, oxygen, inert gases, corrosive gases, liquids and gaseous fuels and hydraulic fluids.
• Product range includes Forward Pressure Regulators; Back Pressure Maintaining Valves; Relief Valves; Manual and Actuated Stop Valves; Solenoid Valves; Filters; Non Return Valves; High and Ultra High Purity Valves; Customer application specific Control Systems.
We Represent:
• To help our Customers resolving their problems with the supply of Critical
Equipment and Products, MacLog Solutions has been also developing a
close relationship with key Manufactures and Vendors all over the world, able
to provide quick solutions to those problems.
• This has helped MacLog Solutions establishing a close relationship with our
Customers, as well as with our Trade Partners.
If you need more information about our Products and Services, just contact us!
Thank You!
(+55 21) 3437-1970
marcelo.correa@maclogsolutions.com
www.maclogsolutions.com