Post on 07-Mar-2018
transcript
Applications
Chemical Injection Skids are designed to compliment our water treatment systems to provide critical reagents for standard operation conditions. Each skid could include multiple units to deliver reagents at different points in the treatment train.
Chemical Injection Skids
MAIN FEATURES
Custom Build and Modular Units Compact footprint Long life chemical pumps
Quick response and end cycles. Complex Process Development Capability Quality Assurance and Control Management
- Control pH- Control Mineral Fouling- Control Bio Fouling- Increase Solubility Limits
ChEMICAl INjECTIoN SkIdS SpECIFIC TEChNology
The systems are designed to deliver concentrated reagents at specific volumes to ensure bulk concentrations in the main process line are maintained.
HEADWORKS BIOLOGY SEPARATION MEMBRANE DISINFECTION BIOSOLIDSu SYSTEMS
Ñ Applications
hoW IT WoRkS
The pumping rate, dilution water flow rate and strength of the chemical are monitored by on-line instrumentation.Control of these parameters is via valves receiving signals from the water treatment systems programmable logic controller (PLC).
CUSTOM DESIGN ExPERIENCE HIGH QUALITY RESPONSIvENESS
Manufacturers’ Representative:
Contacts www.degremont-technologies.com
Materials
- positive displacement & centrifugal chemical pumps- Corrosion resistant steel, lined steel & pVC piping- heavy duty structural steel skids, blasted, primed, finished
coated with two-part epoxy- From carbon steel to specialty alloy- Fully instrumented and controlled.
Copyright © 2007 Anderson Water Systems Inc., Degremont Technologies - SYS08202EN-V1-06/2007 - Subject to change without prior notice, contact Degremont Technologies for more information.
TEChNICAl dATA
All chemical injection capacities can be achieved through integrated sizing based on the total flow rate of the system design. Skids are
physically constructed to fit into all variations of foot prints and environments based on specific client requirements
Remote controls and alarms
- Intrinsic Alarms for: High and Low Pressure, Temperature,Pressure Drop Feed, Conductivity. Control System could include PLC systems for both local and remote and could include lin-kage to SCADA control center.
INdUSTRIAl TREATMENT lINE
Control Panel
Suction
Discharge
Chemical Pump
Degremont Technologies - Anderson
160 King Street W., 2nd Floor
Dundas, Ontario L9H 1V4
CANADA
Tel: + 1 905 627 9233
Fax: + 1 905 627 2381
e-mail: info-anderson@degtec.com
Anderson process Water Treatment
Chemical Inject Skids
Water Intake from river or lake
Water Reuse
Rejectioninto naturalenvironment
RawWater
processWater
IndustrialWastewater
TreatedWastewater
process WWTp
pre-Treatment
Technologies:From screeningto Filtration
primary Separation
Technologies:- Membrane (UF/NF/RO)- Ion exchange- Decarbonation
post Treatment
Technologies:- Membrane (2nd Pass RO)- Ion exchange- EDI- Condensate Polisher
plant operations
Industrial process
WW Treatment
Industrial WastewaterTreatment plant