Mangum School

Post on 08-Jul-2015

249 views 0 download

Tags:

description

ElastaGard, fluid-applied roofing with granules applied directly over granulated modified bitumen

transcript

Edison Elementary Roof Coating ProjectMangum, OK

Project completed by: Washington Companies Inc. Chuck Carpenter - Owner

Chuck,

“Thanks for the pictures. Any other pictures that you have would be great as I will use them to put in the newspaper and also present them to our school board members. I am very impressed with the job you guys did and the professionalism of the workers. You have my full recommendation for any job you are seeking”.

Micky LivelySuperintendent, Mangum Schools

EXISTING ROOFGranulated Modified Bitumen – 40,000 sq.ft.

Granulated Modified Bitumen

Checking depth of alligator cracks in ponding areas

SURFACE PREPARATIONHigh Pressure Power Wash with Bio-degradable Cleaner

NEOGARD8500 Bio-Degradable Cleaner

Bad areas & protrusions detailed with Polyurethane Foam

“Reddish” color is 7780/7781 Primer1/3 gal/100 sq.ft.

7419 HB Urethane Base Coat350 psi tensile strength500% Elongation1.5 gal/100 sq.ft. – 18 dry mils

After Base Coat is Applied to Entire Roof2nd Coat of 7419 HB is Applied to the Seams

70613 Urethane Topcoat2,500 psi tensile strength450% Elongation1.5 gal/100 sq.ft. – 18 dry mils

#11 Roofing Granules Applied Over Wet Topcoat

Total System Elastomeric Coating Thickness to Average 36 Dry Mils for this Project

10 & 15 Year Warranty Requirements10-Year Warranty:

3. Clean roof with high pressure power wash & 8500 Biodegradable cleaner

4. Primer: 7780/7781 epoxy primer at the rate of 1/3 gal/100 sq.ft.

5. Base Coat: 7419 HB urethane at minimum rate of 1.5 gal/100 sq.ft. – 18 dry mils

6. Topcoat: 70613 urethane at a minimum rate of 1.5 gal/100 sq.ft. – 18 dry mils

Total system elastomeric coating thickness to average 36 dry mils

15-Year Warranty:

• Clean roof with high pressure power wash & 8500 Biodegradable cleaner

• Primer: 7780/7781 epoxy primer at the rate of 1/3 gal/100 sq.ft.

• Base Coat: 7419 HB urethane at a minimum rate of 3 gal/100 sq.ft. – 36 dry mils

• Topcoat: 70613 urethane at a minimum rate of 1.5 gal/100 sq.ft. – 18 dry mils

Total system elastomeric coating thickness to average 54 dry mils

CURT CARPENTER C&G COATINGS

Your NEOGARD® Representative

Thank you for your time. Please feel free to contact me for an estimate or more information on the NEOGARD® product

and application that’s right for you.

8228 Marshall Dr.Lenexa, KS 66214

913-438-2412 – office913-634-2588 – cell913-492-4362 – fax

cgcoatings@kcnet.comwww.cgcoatings.comwww.neogard.com