Post on 24-Aug-2021
transcript
165916591659
16.
Pres
sure
Was
h, F
uelli
ng &
Lub
ricat
ion
Adaptors & Fittings
Hydraulics
Hydraulic Quick Release Couplings
Pneumatic Quick Release Couplings
Air Prep., Media, Monitor & Test
KELM™ Pneumatics
Pneumatic & Vacuum Equipment
Valves
Ring Main Systems
Stainless Steel
Malleable Iron
Hose, Tubing & Couplings
Clamps & Clips
Sprays & Adhesives
Blow Guns, Vacuum & Nozzles
Pressure Wash, Fuelling & Lubrication
Air Tools & Compressor Equipment
Tools, Hardware & PPE
Manual Transfer Pumps
Gear Oil PumpSuitable with high viscosity oils, ideal for filling gear boxes. Polypropylene pump, mild steel piston & nitrile seals. Dispenses approximately 100ml per stroke. Has a 1.5m outlet hose with spout. Spout can be drained by locating back into pump body. Supplied with two adaptors as standard: One fits most 25L external Plysu threads (60mm dia). The other fits most 25L Trisure/Valorex thread (56mm dia). Option: universal adaptor, locks onto any external thread that is less than 61mm dia.
0225
HPGO Pump 109.30ADAPT.UNI.L Adaptor 22.40
Liquid Suction/Extraction UnitsNovel device that both sucks & stores extracted liquids. Suitable for fuels, water, oils and many other liquids. Removes: Oil from vehicles, lawn mowers, motorbikes, hydraulic reservoirs without draining, simply insert the suction pipes in the dipstick hole. Water from bunded fuel tank cabinets, fish tanks, bilges & otherwise inaccessible areas. Fuel spillages from bunded tanks/fill point cabinets. Can even suck up surface puddles. Prime the handle & watch it work. Supplied with suction probes to fit most applications. Lightweight & portable. 17 litre version has castors. When full, remove top plug to pour out the contents.
Suction/Extraction Units
0225
HP.SUC2 2.7 Litre 67.35HP.SUC6 6 Litre 133.65HP.SUC17 17 Litre 213.90
Same as 6 litre capacity version (HP.SUC6) but can also empty it’s own tank as is bi-directional. Automatically fills (sucks) & empties (discharge). Prime the handle & watch it work. (May need to prime handle again when discharging). Sucks up 6 litres of water in 2.1/2 mins & empties in the same time.
Suction/Extraction/Discharge Unit
0225
HP.SUC6B 6 Litre 212.75
Features:Pumps diesel, petrol, kerosene and lubricating oils up to SAE 30.Designed to fit 205 litre (55 US gal) or 60 litre (16 US gal) drums.Ideal for high volume aviation transfer fuel.Pumps easily in both directions.Supplied with a 2.4m (8ft) antistatic rubber delivery hose and nozzle and 1050mm (3.5ft) two piece threaded suction tube.Lockable handle and built in nozzle holder.In-built strainer.50mm (2”) adjustable bung adaptor.Output: up to 100 litres (26 US gal) per minute or 1 litre (1 quart) per rotation.Outlet port: 25mm (1”).
GP Rapid-Flo
0122
GP-RAPIDFLO 733.25
Oil Suction GunFor getting oil in/out of gearboxes, transfer cases & di�erentials.• Suitable for use with non corrosive liquids.• Capacity 500cc with 300mm PVC hose.• Deluxe lip seal provides maximum suction.• Steel barrel in premium powder coated finish.• Fully serviceable.• No priming required.
0225
OSG 14.70
www.hydraquip.co.uk