Post on 27-Jul-2020
transcript
Contact Us123 Anywhere St., Any City, ST 12345
+123-456-7890
hello@reallygreatsite.com
www.reallygreatsite.com
Kandlakoya(V), Medchal (M), Hyderabad- 501401, Telangana, India. 9247033440, 9247033441.
International Conference on
Advanced light-weight materialsand structures
ICALMS - 2k20
IMPORTANT DATES Submission of Full-paper
Early-bird Registration deadline
Final Notification of Acceptance
Submission of camera-ready paper
November 20, 2019
December 20, 2019
December 31, 2019
January 20, 2020
EDITORIAL BOARDDr. A. Raji Reddy,
Professor and Director, CMRTCDr. M. Ahmed Ali Baig ,
Professor and Dean (Academics), CMRTCProf. D. Maneiah,
Professor and Head,CMRTCDr. Tatacipta Dirgantara,
Professor, ITBDr. A. Praveen Kumar,
Associate Professor, CMRTCDr. P. Vamsi Krishna,
Associate Professor, NIT Warangal
INTERNATIONAL ADVISORY COMMITTEE
Dr. Hao Hong, Curtin University, Perth, Australia
Dr. Robert O Ritchie, University of California, Berkeley, United States of America
Dr. Tatacipta Dirgantara, Institut Teknologi, Bandung, Indonesia
Dr. S. A Khan IIUM, Malaysia
Dr. Bosko Rasuo, University of Belgrade, Serbia
Dr. Megat Mohamad Hamdan MegatAhmad,
National Defence University, MalaysiaDr.Irfan Anjum
King Khalid University, Saudi ArabiaDr. Eng. Rudiger Rentsch,
University of Bremen, GermanyDr. Arlindo Silva,
Singapore University of Technology and Design, Singapore
Dr. Mohd. Shukry bin Abdul Majid, Universiti Malaysia Perlis, Malaysia
Dr. Salwa Bouadila, Research Centre for Energy, Tunisia
Dr. Mohammad Jawaid, Universiti Putra, Putrajaya, Malaysia
Dr.Leonardo Gunawan, Institut Teknologi, Bandung, Indonesia
Dr. F. Tarlochan, Qatar University, Doha, QatarDr. Rafea Dakhil Hussein,
Swinburne University of Technology, Melbourne, Australia
Dr. Annisa Juuf, Institut Teknologi, Bandung, Indonesia
Dr. M. R. Sanjay, King Mongkut’s University of Technology,
Bangkok, Thailand Dr. N. Arahman
Sujah kwala University, Indonesia
CHIEF PATRONS Shri C. Gopal Reddy, ChairmanSmt. C. Vasantha Latha,Secretary
Dr. A. Raji Reddy, DirectorDr. M. Ahmed Ali Baig,
Professor & Dean (Academics)
Prof. D. Maneiah, Professor & Head of the Department
ORGANIZING CHAIRDr. T. Tirupati, ProfessorDr. M. Shunmugasundaram, Professor
CONVENERDr. A. Praveen Kumar, Associate Professor
CO-CONVENERS
Mr. K Rajnikanth, Assistant ProfessorMr. J. Nagarjun, Assistant Professor
ORGANIZING COMMITTEEMr. L. Mangesh, Associate ProfessorMr. J. Durga Prasad Reddy, Associate ProfessorMr. M. Gowthamuneswara Rao, Assistant ProfessorMrs. SK. Zareena, Assistant ProfessorMrs. K.Yamini Reddy, Assistant ProfessorMr. Debashis Mishra, Assistant Professor
CONFERENCE CHAIR
NATIONAL ADVISORY COMMITTEEDr. K. Venkatasubbaiah,
Indian Institute of Technology Hyderabad, Telangana
Dr. K. Mohammed Haneefa, Indian Institute of Technology, Madras,TamilnaduDr. Anand M Shivapuji, Indian Institute of Science, BangaloreDr. R. Jose Immanuel, Indian Institute of Technology Bhilai,ChhattisgarhDr. N.V Swamy Naidu, NIT-Raipur, ChhattisgarhDr. K. Vijaya Kumar Reddy,JNTUH College of Engineering, HyderabadDr. Srinivasa Prakash Regalla,BITS Pilani, Hyderabad Campus, TelanganaDr. V. Suresh Babu, National Institute of Technology, Warangal,TelanganaDr. A V S S K S Gupta, JNTU-HyderabadDr. K. Prahlada Rao, Jawaharlal Nehru Technological University,AnantapuramuDr. B Sudheer Prem Kumar, JNTU-HyderabadDr. P. Vamsi Krishna, National Institute of Technology, Warangal,TelanganaDr. K. Brahma Raju, S.R.K.R Engineering College, Bhimavaram,Andhra PradeshDr. G. Selvakumar, Shiv Nadar University, Chennai, TamilnaduDr. P. Palpandian,Christ University, Bangalore, KarnatakaDr. M. Ravichandran,K.Ramakrishnan College of Engineering, Trichy,TamilnaduDr. R. Rajasekhar, Kongu Engineering College, TamilnaduDr. Maheshwar Dinkar Jaybhaye College of Engineering, Pune, Maharashtra
REGISTRATION FEE :
March 6 & 7 , 2020THEME : “Innovations & Future Trends in the Era of Advanced Composites”
Accredited by NBA & NAAC with 'A' Grade
PATRONS
Approved by AICTE & Permanently Affliated to JNTU Hyderabad
th th
www.icalms.net
Hyderabad is the capital of southern India's Telangana state. A major center for thetechnology industry, it's home to many upscale restaurants and shops. Its historic sitesinclude Golconda Fort, a former diamond-trading center that was once the Qutb Shahidynastic capital. The Charminar, a 16th-century mosque whose 4 arches supporttowering minarets, is an old city landmark near the long-standing Laad Bazaar.
The Charminar
Hussain Sagar Hitec City Golkonda Fort
The Charminar, constructed in 1591, is a monument and mosque located inHyderabad, Telangana, India. The landmark has become known globally as asymbol of Hyderabad and is listed among the most recognized structures in India.
Hussain Sagar is a necklace-shaped lake in Hyderabad built by Ibrahim Quli QutbShah, and named after Hussain Shah Wali. It is spread across an area of 5.7 squarekilometers and is fed by River Musi. A large monolithic statue of the GautamaBuddha, erected in 1992, stands on Gibraltar Rock in the middle of the lake
HITEC City is a busy tech industry hub. It's filled with office parks and served byIndian, Italian, and BBQ restaurants, as well as lounge bars and fast-food outlets,clustered mainly around Hitech City Main Road. Shilparamam is a crafts villagedisplaying and selling work by artisans from around India, and home to asculpture park and museum. The Shilpakala Vedika convention venue also hostsmusic and comedy.
Golkonda, also known as Golconda, Gol konda, or Golla konda, is a citadel and fortin Southern India and was the capital of the medieval sultanate of the Qutb Shahidynasty, is situated 11 km west of Hyderabad. It is also a tehsil of Hyderabaddistrict, Telangana, India
GOLKONDA
HITEC CITY
HUSSAIN SAGAR
CHARMINAR
Enjoy Your Stay inHyderabad!!!
ABOUT HYDERABAD
ABOUT CMRTC
VISIONTo impart quality education in serene atmosphere thus strive forexcellence in Technology and Research.
MISSION
CMR Technical Campus was established in 2009, sponsored by CMRTechnical Education Society with a vision and mission of impartingquality technical education to the deserving and meritorious students.The institute is located in semi urban area on Hyderabad-Nagpurhighway, about 20 km from Secunderabad and well connected throughOuter Ring Road (ORR). The institute has a sprawling campus of 10acres with lush greenery.
To create state of art facilities for effective Teaching - LearningProcess.Pursue and Disseminate Knowledge based research to meetthe needs of Industry & Society. Infuse Professional, Ethical andSocietal values among Learning Community.
ABOUT THE MECHANICAL DEPARTMENT
The Department of Mechanical Engineering was established in theyear 2009 starting from the inception of the college offering fouryears full time Bachelor’s Degree in Mechanical Engineering and Twoyears Masters Degree in Thermal Engineering. The Department ofMechanical Engineering functions with the prime goal of impartingthe sound mechanical engineering education, advance theunderstanding and application of mechanical engineering principles,enhance the development of the Nation, and improve the quality oflife of society through teaching, research, and outreach programs.The Department is accredited by NBA (National Board ofAccreditation). The Department has highly qualified and dedicatedfaculty members and good ambience for research in the areas ofAlternative fuels, Surface Engineering, Tribology, CompositeMaterials and CAD/CAM/CAE. The Department has conducted manyguest lectures, workshops, faculty development programs, short termtraining courses besides undertaking funded projects from varioussectors.
The First International conference on Advanced Lightweight Materials and Structures(ICALMS-2020) aims to bring together academicians, leading scientists, Industrialists,researchers and students, in a common forum to share their experiences and researchresults on all aspects of advanced light-weight materials, structures and its variousapplications. The conference theme for the ICALMS 2020 is “Innovations & FutureTrends in the era of advanced composites”, with the objective of exploring the latestresearch into composite materials and how they will be used in the future coveringmultiple applications including aerospace, construction, wind energy, automotive,electronics and so on. Leading experts from India and abroad would be sharing theirexperience and expectations in this conference.
Prospective authors are invited to submit original unpublished manuscripts and
advanced developments in the topics related to the conference.
PROCESSING OF ALUMINIUM AND MAGNESIUM ALLOYSSMART LIGHT WEIGHT STRUCTURESSTRUCTURAL FAILURE UNDER IMPACT, ENERGY ABSORBING SYSTEMS
AND CRASH WORTHINESS STRUCTURAL ANALYSIS AND OPTIMIZATIONCOMPOSITE MATERIALS AND PROCESSINGUNCONVENTIONAL MACHINING AND ADDITIVE MANUFACTURING PROCESSESMODELING AND NUMERICAL ANALYSIS OF VARIOUS FORMING PROCESSESNANO COMPOSITES FOR LIGHT-WEIGHT STRUCTURESTOOL DESIGN AND MANUFACTURE FOR PRODUCING LIGHTWEIGHT COMPONENTSDESIGN AND MANUFACTURING FOR LIGHTWEIGHT COMPONENTS & STRUCTURESIMPACT AND DYNAMIC STRUCTURAL ANALYSISVEHICLE SAFETY (AUTOMOTIVE, RAILWAYS, AEROSPACE, MOTORCYCLES, NAVAL)MATERIAL BEHAVIOR (LIGHTWEIGHT ALLOYS, COMPOSITES, POLYMERS, METALS, FOAMS,
CERAMICS, BIOLOGICAL MATERIALS)IMPACT AND FAILURE OF STRUCTURESBEHAVIOUR OF MATERIALS UNDER IMPACT AND BLAST LOADINGJOINING TECHNIQUES FOR LIGHTWEIGHT STRUCTURES FOR SIMILAR
AND DISSIMILAR MATERIALSFRICTION STIR WELDING IN LIGHT-WEIGHT SANDWICH STRUCTURESAPPLICATIONS: AEROSPACE , AUTOMOTIVE, MARINE, DEFENCE, OFFSHORE, CIVIL
CONFERENCE THEME
CALL FOR PAPERS
FOR CORRESPONDENCE AND RELATED QUERIESProf. D. ManeiahConference Chair, ICALMS-2020Phone: +91-9246874863e-mail:manikumar.dakkili@gmail.com, icalms2020@gmail.com
Dr. A. Praveen KumarConvener, ICALMS-2020Phone: +91-6304356358e-mail: praveencmr18@gmail.com,convener@icalms.net
We welcome submissions in the following areas but not limited to: