Post on 22-Jul-2016
description
transcript
MarlinFirearms.com 1
2 MarlinFirearms.com
LEVER-ACTION TRADITION 4-5
LEVER-ACTION RIFLES 6-13
BOLT-ACTION RIFLES 14-15
RIMFIRE RIFLES 16-23
ACCESSORIES 24-25
SPECIFICATIONS 25-31
See page 25 for complete model listing & specifications.
2
43
AT MARLIN, SAFETY IS OUR TOP PRIORITY. EVERY MARLIN LEVER ACTION HAS THESE KEY FEATURES BUILT IN: YOUR SAFETY LEVER.
TWO-PIECE FIRING PIN: Ensures the primer cannot be struck unless the rifle is in the fully locked position. The rear section of the pin drops out of alignment with the front until the locking bolt is fully engaged.
TRIGGER BLOCK: This device prevents the trigger from being pulled unless the lever is fully locked up.
TRADITIONAL HALF-COCK HAMMER POSITION: The hammer can be locked in the half-cock position as a convenient safety.
HAMMER-BLOCK CROSSBOLT SAFETY: A positive, highly visible safety mechanism that prevents the hammer from striking the firing pin – even when the trigger is pulled.
2
3
4
THE FINEST MATERIALS
We start with premium grade steel carefully chosen for its superior rigidity and hardness. Our stocks are crafted of high-grade American walnut.
OUR LEVER-ACTION LEGACY
A TRULY SUPERIOR DESIGN
Ours is the strongest lever-gun receiver ever conceived. Its substantial sidewalls are cut out only where necessary for loading and ejection. For rock-solid reliability, heat-treated solid-steel forgings are used for the receiver and trigger guard.
4
11
MODEL 336C
MODEL 39A
AT MARLIN, SAFETY IS OUR TOP PRIORITY. EVERY MARLIN LEVER ACTION HAS THESE KEY FEATURES BUILT IN:
MODEL 1895
LEVER ACTION:TRADITION
THE ACCURACY ADVANTAGEAccuracy starts in the materials and the craftsmanship. Marlin uses the finest materials to create the strongest receivers. And our
skilled gunsmiths adhere to the tightest manufacturing tolerances to ensure outstanding results. The first time you print a group
with one of our lever guns is an eye-opening experience. You’re shooting precision machinery, and it shows.
It’s the classic American long gun, a tool of history and just as much
a symbol of the Old West as the six-shooter. The Marlin® brand is
synonymous with lever action repeaters. It’s a rich tradition, with a
heritage stretching back to the Model 1881, our first centerfire, and the
Model 1891, our first rimfire. In fact, Annie Oakley trusted the Model 1891
above all others to demonstrate her legendary marksmanship. Today,
hunters and sportsmen alike are still demonstrating their marksmanship
with Marlin rifles, including the Model 39A, still in production today as
the oldest continuously produced rifle in the world. Marlin is the first
name in lever action, producing classics like our 1894 carbines, 1895
rifles and our top-of-the-line 336 series. Each is made from premium
grade steel to create the strongest lever-gun receiver ever built. The
action of the lever is ultra-smooth for rapid follow-up shots. And for rock-
solid reliability, heat-treated solid-steel forgings are used for the receiver
and trigger guard plate. Marlin is always working to improve these
timeless rifles with new technology.
OUR LEVER-ACTION LEGACY
MarlinFirearms.com | 5
MODEL 336BL America’s favorite lever action keeps advancing. This time with a Big Loop Lever for faster,
more efficient chambering and ejection with gloves on, plus striking laminated woodwork
that improves weather resistance and adds aesthetic appeal. Its 18 ½” barrel is handy in the
brush, and the full-length magazine tube gives you six rounds of 30-30 Win. assurance at
the moment of truth. Six-shot tubular magazine.
MODEL 336W This hunting machine is chambered for 30-30 Win. and features a 20” Micro-Groove®
barrel with adjustable rear sight and ramp with hood front sight. Plus, its receiver is drilled
and tapped for scope mounts. The walnut-finished laminate stock and fore-end have cut
checkering and comes with a padded nylon sling. This carbine is also available with a
factory-mounted and boresighted 3–9x32mm scope shown above (Order #70521). Six-shot
tubular magazine.
IDEAL FOR:
6 See page 25 for complete model listing & specifications.
MODEL 336XLRThis is the ultimate long-range evolution of our traditional lever action Model 336. Used in conjunction with
today’s spire-point flexible-tip ammunition and a 24” barrel, this rifle turns the 30-30 Win. cartridge into a
250+ yard deer dropper. For weather resistance, all major components are crafted of stainless steel, and the
woodwork is two-tone laminate. It has a full pistol grip, swivel studs and cut checkering. Along with fully
adjustable sights, it’s drilled and tapped for scope mounts. Five-shot tubular magazine.
MODEL 336C LIMITED EDITION & 336SS It is the flagship of our Model 336 family and one of the most popular hunting rifles in North America. Now
we’re giving our industry standout its due with the Model 336C Limited Edition. Highlights of this special
limited edition include a 24-Carat gold Marlin Horse and Rider engraved on the left, and scroll work on the
right; “Limited Edition” stamped on the barrel; a gold-plated trigger; and an eye-catching, B Grade walnut
stock with fleur-de-lis checkering. Featuring a 20” barrel with Micro-Groove® rifling, richly blued finish and
30-30 Win. or 35 Rem. chambering, it is a timeless embodiment of dependability, accuracy and handsome
looks. Also available, the Model 336SS is constructed primarily of stainless steel for corrosion-resistance
and long-term durability.
SUPERIOR RECEIVER: Our clean, flat, solid-top receiver keeps out debris and foul weather, and is drilled and tapped for a scope mount. Its true side ejection equally accommodates both right-and left-handed shooters.
Engraved 24-CaratGold Marlin Horse and Rider
REAR SIGHTS: Our adjustable semi-buckhorn folding rear sights.
AMERICA’S MOST FAMOUS FAMILY OF DEER SLAYERSThe Model 336 family are icons of the deer woods. And this year, we’re celebrating their standard-bearer with the Model 336C
special limited edition. Each rifle here is chambered in 30-30 Win. or 35 Rem., and features Micro-Groove® rifling, ensuring that
tags will be filled, mouths fed and the reign of America’s ultimate woods rifle family will continue going strong.
LEVER ACTION:336 CENTERFIRE RIFLES
MarlinFirearms.com | 7
IDEAL FOR:
MODEL 1895SBL Acquire and fire with a quick-pointing 18½” barrel, and cycle rapidly through six rounds
of 45-70 Gov’t. with the Big Loop Lever. It’s as rugged as the tradition that it’s made from,
with the modern advancements of stainless steel metal components and a weather-
resistant black/grey laminated stock.
MODEL 444 The legendary speed and smooth operation of the Marlin lever action in the hard-hitting
444 Marlin – a cartridge that generates nearly 1½ tons of muzzle energy. Its 22” barrel
makes it both handy and well-balanced.
8 See page 25 for complete model listing & specifications.
MODEL 1895 & 1895CBFor hunters who appreciate the fit and function of a classic 45-70 firearm.
The Model 1895 has a 22” barrel, while the Model 1895 CB has a 26” barrel. And
each comes with Ballard-style rifling and handsome American black walnut stock.
MODEL 1895G & 1895GS Lightweight and hard-hitting, these two lever action carbines are the rifle of choice for
many professional hunting guides. The Model 1895G has richly blued steel. The Model
1895GS has all major metal parts machined from stainless steel for corrosion resistance.
MODEL 1895GBLEasy to lever with gloves when hunting in cold weather country, our Big Loop Lever
innovation makes the lever action 45-70 Gov’t. even better. It features a two-tone
brown laminate stock for enhanced weather resistance and distinctive looks.
LEVER ACTION:BIG-BORE CENTERFIRE RIFLES
XS GHOST RING SIGHTS A sighting system optimized for rapid target acquisition, XS Ghost Ring Sights are the ultimate for close quarters and heavy-cover
situations. Simply point and shoot with pinpoint accuracy. (Offered on 1895SBL only).
MarlinFirearms.com | 9
IDEAL FOR:
MODEL 1894 COWBOYTapered octagon barrel. Ballard-style rifling. It looks the part for the open range, but
beneath the richly blued finish, classic black walnut stock and fore-end, beats the
receiver of a precision-tuned modern firearm. The Model 1894 Cowboy has a 20”tapered
octagon barrel and is chambered for 45 Long Colt. Ten-shot tubular magazine.
See page 26 for complete model listing & specifications.10
MODEL 1894 & 1894CThe Model 1894 is an elegant carbine chambered for pistol calibers. Its handy size
is punctuated by a quick-pointing, straight-grip stock design and Old West-styled,
adjustable semi-buckhorn sights. Also available is the Model 1894C. Chambered
for 357 Mag./38 Special, the Model 1894C is the natural sidekick to your revolver of
the same caliber. Both feature finely checkered American black walnut stocks and
fore-ends. Ten-shot tubular magazine (Model 1894) and nine-shot tubular magazine
(Model 1894C).
LEVER ACTION:1894 CENTERFIRE & COWBOY RIFLES
MARLIN DEVELOPED THE FIRST FLAT-TOP, SIDE-EJECT RECEIVER and has been leading the way ever since. We took the original look and feel, then combined it with our best rifle technology to
create a gun that looks like history and shoots like the future.
MarlinFirearms.com | 11
CELEBRATINGONE HUNDRED TWENTY YEARS
1894 - 2014
IDEAL FOR:
MODEL 308MXThe traditional look of blued steel and walnut woodwork, with the outstanding long-
range ballistics of the 308 Marlin Express offering. Equipped with a 22” barrel and fully
adjustable sights. Receiver is drilled and tapped. Five-shot tubular magazine.
MODEL 338MX & 338MXLR Classic good looks with the long-distance, big game dropping power of our 338 Marlin
Express. The Model 338MX has a 22” barrel, blued steel metalwork and American
walnut woodwork. And the Model 338MXLR has a 24” barrel, weather-resistant two-
tone laminate stock and stainless steel components.
See page 26 for complete model listing & specifications.12
MODEL 308MXLRWith an awesome 24” barrel of bullet-stabilizing, powder-burning steel, this super-tuned rifle platform stretches
the maximum lethal distance from our breakthrough 308 Marlin Express chambering. For weather resistance, all
major components are crafted of stainless steel, and the stock and fore-end are a distinctive two-tone laminate.
Its extremely rugged stock has a full pistol grip and pre-installed sling swivel studs. Other features include side
ejection, a solid-top receiver that’s tapped for scope mounts and fully adjustable sights. Five-shot tubular magazine.
LEVER ACTION:308 MARLIN EXPRESS
3000
2500
2000
1500
1000
0500
0 0 0 1 0 0 2 0 0 3 0 0 4 0 0
ENER
GY
(lb.-f
eet)
DISTANCE (yards)
308 Marlin Express 160 grain Evolution: Energy: 2513 ft/lb
308 Win. 165 grain BTSP: Energy: 2641 ft/lb
+15
0
-15
-30
-45
0 0 0 1 0 0 2 0 0 3 0 0 4 0 0
TRA
JECT
ORY
(inc
hes)
DISTANCE (yards)
308 Marlin Express 160 grain Evolution: Muzzle Vel: 2660 fps
308 Win. 165 grain BTSP: Muzzle Vel: 2685 fps
THE 308 MARLIN EXPRESS VS. THE 308 WIN.
MarlinFirearms.com | 13
KINETIC ENERGY IS THE FANCY WAY OF SAYING “HITS LIKE A RUNAWAY FREIGHT TRAIN.”That’s what the 308 Marlin Express does. These deluxe long-range Marlin rifles get the job done time and time again on big
game like elk, moose and bear. Rounds fly flat, fast and accurate, then hit with a devastating punch. They’re the only 300-yard
chamberings for tubular-magazine lever actions. And only Marlin makes them.
SPIRE-POINT FLEXIBLE-TIP BULLETS: Providing a higher ballistic coefficient and dramatic velocity increases over traditional round-nose bullets, they ride safely in tubular magazines thanks to flexible polymer tips.
(Scope not included)
ANATOMY OF A BEST-IN-CLASS BOLT ACTION
IDEAL FOR:
SOFT-TECH® RECOIL PADOur proprietary design, the Soft-Tech pad dramatically lessens felt recoil for enhanced shooting comfort. It’ll improve your shooting from the bench and in the field.
PILLAR BEDDINGA common aftermarket upgrade, this custom touch is added to provide the accuracy of a hand-built rifle. Steel pillars are fitted in the stock to reinforce the mounting area and provide a more solid, consistent fit.
2
FULLY ENCLOSED BOLT SHROUD WITH COCKING INDICATORProtects the shooter in the case of a pierced primer or case failure. An easy-to-see cocking indicator is readily visible under the bolt shroud whenever the rifle is cocked.
4
PRO-FIRE® TRIGGER SYSTEMThis innovative, user-adjustable trigger system was developed in house to provide the ultimate in crispness and safety. It has virtually zero creep and can be set to break as low as 2½ lbs. The external Pro-Fire release mechanism prevents movement of the trigger until it is fully depressed.
3
BUTTON-RIFLED BARREL The button rifling process creates the smoothest finish of any barrel manufacturing technique. This refined, ultra-consistent launch surface for your bullets means improved accuracy. Button-rifled barrels are also exceptionally strong. All feature a target crown to enhance shot-to-shot precision, and six-groove rifling.
5
FLUTED BOLTMarlin’s fluted bolt design decreases surface area and resulting drag, making the X7’s bolt one of the smoothest actions available.
6
1
1
2
3
4 6
See page 27 for complete model listing & specifications.14
BOLT ACTION:X7™ SERIES
CUSTOM-GRADE ACCURACY COMES STANDARDAll of today’s best bolt-action technologies come together in the tightest group of hunting rifles ever offered in their class. In case
you’re thinking accuracy isn’t everything, it has all those other things, too. Like Marlin’s 140-year heritage reliability and superior
craftsmanship. With cutting-edge features such as our Pro-Fire® Adjustable Trigger, a button-rifled barrel with target-style crown,
a pillar-bedded stock, Soft-Tech® recoil pad and more, the X7 Series makes a big statement wherever game animals and competing
rifles call home. Capacity for all models is 4+1.
MODEL X7VH A varmint configuration of our famous X7, this model is equipped with a 26” heavy
barrel, and chambered in 223 Remington, 22-250 Remington and 308 Win.
MODEL X7™ & X7Y Super-tough black synthetic, long-action Model X7 chamberings include 25-06
Remington, 270 Win. and 30-06 Springfield. The short-action Model X7 is available
in 223 Remington, 7mm-08 Remington and 308 Win. To serve youth and shooters
of small stature, there’s the compact Model X7Y, chambered for 243 Win., 7mm-08
Remington and 308 Win. For the complete package, the Model X7 is available with
a 3-9x40mm scope mounted and bore-sighted, available in both standard youth
(243 Win., 7mm-08 Remington and 308 Win.) and adult (243 Win., 270 Win. and
30-06 Sprg.) chamberings.
5
MarlinFirearms.com | 15
ERGONOMIC STOCKThis ergonomic stock is designed for easy handling and improved fit and feel. This stock shoulders quickly and comfortably, helping to create textbook form round after round.
XT PISTOL GRIPThis pistol grip features a slight palm swell for a rich feel and solid grip. By improving the shooter’s overall grip on the rifle, we are able to improve handling, shouldering, shooting form and ultimately accuracy.
THUMB AND TRIGGER SAFETY In addition to the standard thumb safety, the XT ™ Series features a trigger safety incorporated into the Pro-Fire® Adjustable Trigger, which prevents the trigger from being pulled until the trigger safety is fully depressed, for an added level of safety and confidence.
REDUCED BOLT FORCE Through improved trigger technology, we are able to reduce the overall bolt force release, for easier ejection and faster chambering.
XT PRO-FIRE® ADJUSTABLE TRIGGER Marlin’s user-adjustable trigger system allows the shooter to customize the trigger pull weight between 3 and 6 lbs., while providing the ultimate crispness and virtually zero creep. Everyone’s finger works a little differently, and the Pro-Fire® Adjustable Trigger accommodates those differences to ensure a crisp, smooth pull every time for better accuracy.
ERGONOMIC STOCK REDUCED BOLT FORCE
THUMB AND TRIGGER SAFETYXT PISTOL GRIP
XT PRO-FIRE ADJUSTABLE TRIGGER
See page 27 for complete model listing & specifications.16
LOADED WITH THE LATEST AND BEST TECHNOLOGIES The most complete family of rimfire rifles ever, our Marlin XT™ series take the lead for accuracy, reliability and safety. For a smooth
trigger pull, the XT™ series features the Pro-Fire® Adjustable Trigger. Each barrel has Micro-Groove® rifling to ensure pinpoint
accuracy on the range or in the field. Our XT™ line also includes our latest innovation, the XT-22 Youth series, two models designed
specifically for younger shooters.
MODEL XT-22RO COMBO
MARLIN’S EXCLUSIVE MICRO-GROOVE® TECHNOLOGYMicro-Groove® rifling has become synonymous with rimfire accuracy. Introduced in 1953 by Marlin, the Micro-
Groove® barrel continues to be revolutionary in terms of accuracy, creating a rimfire bore with many more lands
and grooves than conventional rifling (see images below). This system results in less bullet distortion when fired.
Less distortion plus a better gas seal lead to greater accuracy and tighter groups. Micro-Groove® rifling is only
available from Marlin.
Micro-Groove® Rifled Barrel
Conventionally Rifled Barrel
MarlinFirearms.com | 17
RIMFIRE:XT™ SERIES
MODEL XT-22MTR The XT-22MTR models feature a 12-shot tubular magazine, with a blued barrel and
black synthetic stock with swivel studs, and full pistol grip. Includes adjustable rear
sight and ramp front sight.
MODEL XT-22MVSRThis black synthetic stock masterpiece includes a 4 and 7-shot magazine, stainless
barrel, thumb safety, Pro-Fire® Adjustable trigger, rear and front scope bases only.
IDEAL FOR:
See page 29 for complete model listing & specifications.18
RIMFIRE:XT™ & XT™-22 SERIES
MARLIN’S PREMIER BOLT-ACTION RIMFIRE RIFLESThese bolt-action 22s are reliable, accurate and fun to shoot. They come in several different models, with 4 or 7-shot detachable
magazines or 12-shot tube magazines; synthetic, hardwood or laminated stocks; ramp sights, hood sights or fiber-optic sights.
All of them have Marlin innovations such as the Pro-Fire® Adjustable Trigger and Micro-Groove® rifling. The XT-22 series comes
chambered in 22 Short, 22 Long, 22 Long Rifle or 22 Win. Mag Rifle (WMR).
MODEL XT-22TSRFeaturing a tubular magazine, stainless barrel, thumb safety, Pro-Fire® Adjustable
trigger, adjustable semi-buckhorn rear folding sight, and high visibility orange front
sight this 22 is ready to go. Available with a black synthetic stock with swivel studs
and full pistol grip.
MODEL XT-22 With a Monte Carlo walnut-finished hardwood stock, the XT-22 features a 7-shot
magazine, blued barrel, thumb safety, Pro-Fire® Adjustable trigger, adjustable rear
sight and ramp front sight.
MODEL XT-22RO COMBOEach XT-22RO Combo features a 7-shot magazine, blued barrel, thumb safety,
Pro-Fire® Adjustable trigger, and comes with 3–9x32mm scope factory mounted
and bore-sighted.
MarlinFirearms.com | 19
MODEL XT-17VA tool for every task... And for varmints, the right tool is the XT-17V chambered in 17 HMR.
It sends a polymer-tipped bullet rocketing down range at 2,500+ feet per second with a laser-
flat trajectory. Our XT Pro-Fire® Adjustable Trigger produces an extremely consistent trigger
pull with an ultra-clean break. Included are 4-shot and 7-shot magazines. The rugged walnut-
finished hardwood Monte Carlo stock comes with sling swivel studs. The receiver is drilled,
tapped and grooved for your choice of convenient scope mounting options. Model XT-17VO
available with a factory-mounted and bore-sighted 3-9x32mm scope.
MODEL XT-22YRA full-size rifle doesn’t fit in a youth’s hands the same way it fits in an adult’s, making it
harder to learn the correct grip and shooting form. Marlin’s latest innovation is the XT-22
Youth Series. It’s the first series of rifles designed exclusively for young shooters. It
features a shorter stock, shorter trigger reach, smaller grip and a higher comb; making it
easier for a youth to acquire and hold the proper sight picture. These rimfires also feature
a reduced bolt opening force, for smoother loading and to prevent misfeeds. Our Pro-Fire®
Adjustable Trigger adjusts the trigger pull, too. Pass on your love of shooting and hunting
to the next generation, and give them the right start with this line of rimfire rifles.
IDEAL FOR:
See page 31 for complete model listing & specifications.20
MODEL 795SS Accuracy. Reliability. Lightweight. This rugged, economical 22 autoloader features an
18” barrel, 10-shot nickel-plated magazine, and an automatic “last-shot” bolt hold-open.
Its black, fiberglass-reinforced synthetic stock is virtually indestructible, with molded-in
checkering and swivel studs. With sleek lines in a corrosion-resistant, stainless steel
finish, this all-season favorite is fitted with an adjustable open rear sight and a ramp
front sight. Our Model 795 is also available in a blued steel finish.
MODEL 795 COMBOSynthetic, scoped combo. 10-shot nickel magazine. 4x20mm scope mounted and bore-sighted.
MODEL 70PSSThis stainless steel, semi-auto tack driver packs down compactly in its case, making
it the perfect companion for any activity where space is at a premium. You can take
it apart and put it back together in a matter of seconds. It features stainless steel
construction, a rugged fiberglass-filled black synthetic stock and a 7-shot magazine.
Padded case with built-in flotation comes with every 70PSS for easy carrying and storage.
MARLIN IS PROUD TO SUPPORT PROJECT APPLESEED Project Appleseed and The Revolutionary War Veterans Association’s mission is to teach every American our shared heritage
and history, as well as traditional rifle marksmanship skills using our Model 795.
Visit www.appleseedinfo.org to learn more.
MarlinFirearms.com | 21
RIMFIRE:XT™-22 / XT™-17
MODEL 795MODEL 70PSS
MODEL 60SB The added durability of stainless steel paired with a traditional
walnut-finished laminated stock.
MODEL 60SNThe classic Model 60 with a rugged, black synthetic stock
featuring molded-in checkering and swivel studs. A 4x20mm
scope included with Model 60SN w/Scope (70651).
IDEAL FOR:
See page 31 for complete model listing & specifications.22
TRUSTED ABOVE ALL OTHERS, MORE THAN 11 MILLION TIMESAfter 54 years and more than 11 million rifles sold, the Model 60 is one of the world’s most popular 22 rimfires – and an American
classic in every way. Sleek lines cover the handsome, walnut-laminated stock, while the 19” Micro-Groove® rifled barrel has a
precision-crowned muzzle to split hairs like no other. Enhancing its appeal, the tubular magazine holds up to 14 Long Rifle rounds,
while the cross-bolt safety and the manual bolt include our automatic “last shot” bolt hold-open. From young shooters entering the
sport, to veterans needing a straight-shooting
companion, choose the 22 rimfire trusted more than 11 million times. And counting.
MarlinFirearms.com | 23
MODEL 60SSOur famous Model 60 with the versatility of a stainless steel finish and a two-tone
laminated stock.
REALTREE®
Realtree Xtra® Grey™Realtree Xtra® Brown™
Realtree Hardwoods Green HD®
Realtree Hardwoods®
Realtree Hardwoods® Blaze™Realtree Hardwoods® Snow™
Realtree Hardwoods Green™
Realtree Hardwoods HD®
page 5
Logos Approved for Approved Collateral, Promotional, and Royalty-Based Packaging Use Only
MODEL 60CThe world’s most popular 22 rifle is also available with synthetic Monte Carlo stock
covered with a Realtree® Hardwoods™ pattern.
MODEL 60One of the most popular 22s in the world. Available in Monte Carlo walnut-finished
laminated stock.
RIMFIRE:MODEL 60
24 MarlinFirearms.com
XT™ SYNTHETIC YOUTH STOCK - Research and measurements conducted over a 4 year period. - Dimensions are from 50th percentile from large samplings of 12-year old youths. - Dimensional changes to classical stock dimensions based on fit differences:
Length of Pull - 2” (Shorter arms)
Drop at Comb +1/4” (Shorter head height, improved sight picture)
Grip Circumference -5/8” (Smaller hands and fingers)
Trigger Reach -1/2” (Shorter fingers)
XT™ SYNTHETIC STOCKSThe ergonomic XT™ Synthetic Stock is designed for easy handling and improved fit and feel. You will find this stock shoulders quickly
and comfortably, helping to create textbook form round after round. Stock grip features a slight palm swell for a rich feel and solid grip.
By improving the shooter’s overall grip on the rifle, we were able to improve handling for ultimate accuracy.
MAGAZINES• 4, 7 and 10-shot magazines to fit all magazine-
fed Marlin bolt-actions
• 22LR, 22WMR and 17 HMR chambering
• Available in blue and nickel finishes
MAGAZINES Order # Description Caliber Capacity Finish MSRP
71900 707246: Fits Bolt-Actions and Pre-1996 Self-Loaders 22LR 7 Blue $12.80
71901 707046: Fits Post-1996 Self-Loaders (With Last Shot Hold-Open Feature) 22LR 7 Nickel $14.00
71902 707135: Fits Bolt-Actions and Post-1988 Self-Loaders 22LR 10 Nickel $16.40
71903 704046: Fits Discontinued Bolt-Actions #80, #780, #20 and #25 22LR 7 Blue $15.70
71920 705146: Fits All 22 WMR and 17 HMR Bolt-Actions 22 WMR /17 HMR 7 Blue $13.70
71921 405346: Fits All 22 WMR and 17 HMR Bolt-Actions 22 WMR /17 HMR 4 Blue $12.90
71922 705246: Fits All 22 WMR and 17 HMR Bolt-Actions 22 WMR /17 HMR 7 Nickel $15.30
71923 405446: Fits All 22 WMR and 17 HMR Bolt-Actions 22 WMR /17 HMR 4 Nickel $14.50
ACCESSORIES
24 Specifications subject to change without notice.
71902 71903 71900
71920 71922
71952
71953
*Made to work on Model XT & 900 Series Firearms
- Convert your Model 60 into a thing of beauty.
- Available in Desert Camo Satin and Green Mountain Camo Satin laminates.
NEW
Order # Description Finish MSRP
71953 Youth Synthetic Stock Matte Black $50
71952 Adult Tubular Fed Synthetic Stock Matte Black $50
71951 Adult Magazine Fed Synthetic Stock Matte Black $50
71950 Adult Bull Barrel with Beaver Tail Fore-End Synthetic Stock Matte Black $50
71948Model 60 - Laminate WoodDesert
Satin $99
71949 Model 60 - Laminate Wood Green Mountain Satin $99
MODEL 60 WOOD STOCKS
71948
71949NEW NEW
NEW
ACCESSORIES & SPECIFICATIONS
SCOPE MOUNTING BASES
71930 71931
336 CENTERFIRE RIFLES
Model 336Y336C
NEW 336C Limited Edition336W, 336W w/Scope 336SS 336XLR 336BL
Caliber 30-30 Win. (70524)
30-30 Win. (70501) Limited Edition
30-30 Win. (70504) 35 Remington (70506)
30-30 Win. (70520) 30-30 Win w/Scope (70521) 30-30 Win. (70510) 30-30 Win. (70530) 30-30 Win. (70502)
Capacity 5-shot tubular magazine 6-shot tubular magazine 6-shot tubular magazine 6-shot tubular magazine 5-shot tubular magazine (spire point bullets)
6-shot, full length tubular magazine
Action Lever action; side ejection; solid-top receiver; satin blued finish; hammer block safety
Lever action; side ejection; solid-top receiver; deeply blued metal surfaces; hammer block safety
Lever action; side ejection; solid-top receiver; satin blued finish; hammer block safety
Lever action; side ejection; solid-top stainless steel receiver, barrel, lever, trigger guard plate, magazine tube and loading gate; hammer block safety
Lever action; side ejection; stainless steel receiver, fluted bolt, barrel, lever, trigger guard plate, magazine tube and loading gate; hammer block safety
Lever action with big-loop finger lever; side ejection; blued steel receiver; hammer block safety
Stock Walnut finished cut-checkered laminate with pistol grip; tough Mar-Shield finish; blued steel barrel band with swivel; padded nylon sling; rubber butt plate
American black walnut pistol-grip stock with fluted comb; cut checkering; rubber rifle butt pad; tough Mar-Shield finish; blued steel barrel band with swivel stud
Walnut finished cut-checkered laminate with pistol grip; tough Mar-Shield finish; blued steel barrel band with swivel; padded nylon sling; rubber butt plate
American black walnut pistol-grip stock with fluted comb; cut checkering; rubber rifle butt pad; nickel-plated swivel studs
Black/grey laminated hardwood pistol-grip stock with fluted comb; cut checkering; deluxe recoil pad; nickel-plated swivel studs
Brown laminated hardwood pistol-grip stock with fluted comb; cut checkering; rubber rifle butt pad; blued swivel studs
Barrel 16¼" with Micro-Groove® rifling (12 grooves)
20" with Micro-Groove® rifling (12 grooves)
20" with Micro-Groove®
rifling (12 grooves)20" stainless steel with Micro-Groove® rifling (12 grooves)
24" stainless steel barrel (6 grooves)
18½" blued with Micro-Groove® rifling (12 grooves)
Twist Rate
1:10" 30-30 Win. - 1:10" 35 Remington - 1:16" 1:10" 1:10" 1:12" 1:10"
Sights Adjustable semi-buckhorn folding rear sight, ramp front sight with brass bead and Wide-Scan hood. Solid-top receiver tapped for scope mount; offset hammer spur (right or left hand) for scope use. 336W w/Scope - Available with a factory mounted and boresighted 3-9x32mm scope and mounts.
Length 33¼" 38½" 38½” 38½" 42½" 37"
Length of Pull
12 ¾” 13 3/8”
Approx. Weight
6½ lbs. 7 lbs. 7 lbs. 7 lbs. 7½ lbs. 7½ lbs.
MSRP $515$850 (70501)$610 (70504) (70506)
$515 (70520)$565 (70521)
$749 $932 $641
Order # Description Finish MSRP
71930 707146: Scope Mounting Bases for 900 & XT Series Rimfire Bolt-Actions Blue $9.80
71931 707156: Scope Mounting Bases for 900 & XT Series Rimfire Bolt-Actions Nickel $9.80
MarlinFirearms.com | 25
26 MarlinFirearms.com
Model 1894 Cowboy 1894 1894C
Caliber 45 Colt (70444) 44 Remington Magnum/44 S&W Special (70400) 357 Mag./ 38 Special* (70410)
Capacity 10-shot tubular magazine 10-shot tubular magazine 9-shot tubular magazine
ActionLever action with squared finger lever; side ejection; deeply blued metal surfaces; solid-top receiver; hammer block safety
Lever action with squared finger lever; side ejection; deeply blued metal surfaces; solid-top receiver; hammer block safety
Lever action with squared finger lever; side ejection; deeply blued metal surfaces; solid-top receiver; hammer block safety
StockStraight-grip American black walnut; rubber butt plate; tough Mar-Shield finish; blued steel fore-end cap
American black walnut straight-grip stock; cut checkering; rubber rifle butt pad; tough Mar-Shield finish. Blued steel fore-end cap; swivel studs
American black walnut straight-grip stock; cut checkering; rubber rifle butt pad; tough Mar-Shield finish; swivel studs
Barrel 20" tapered octagon with deep-cut Ballard-type rifling (6 grooves) 20" with deep-cut Ballard-type rifling (6 grooves) 18½" with deep-cut Ballard-type rifling (6 grooves)
Twist Rate
1:38" 1:38" 1:16"
SightsAdjustable Marble’s semi-buckhorn rear sight, Marble’s carbine front sight. Solid-top receiver tapped for scope mount; offset hammer spur (right or left hand) for scope use.
Adjustable semi-buckhorn folding rear sight, ramp front sight with brass bead and Wide-Scan hood. Solid-top receiver tapped for scope mount; offset hammer spur (right or left hand) for scope use.
Length 37½" 37½" 36"
Length of Pull
13 3/8”
Approx. Weight
6½ lbs. 6½ lbs. 6 lbs.
MSRP $1,041 $729 $729
1894 CENTERFIRE & COWBOY RIFLES
SPECIFICATIONS
Model 1895 1895G 1895GS 1895GBL 444 1895CB 1895SBL
Caliber 45-70 Gov't. (70460) 45-70 Gov't. (70462) 45-70 Gov't. (70464) 45-70 Gov't. (70456) 444 Marlin (70540) 45-70 Gov’t. (70480) 45-70 Gov’t. (70478)
Capacity 4-shot tubular magazine
4-shot tubular magazine
4-shot tubular magazine
6-shot, full-length tubular magazine
5-shot tubular magazine 6-shot 6-shot, full-length
tubular magazine
Action Lever action; side ejection; solid-top receiver; deeply blued metal surfaces; hammer block safety
Lever action; side ejection; solid-top receiver; deeply blued metal surfaces; hammer block safety
Lever action; side ejection; stainless steel receiver, barrel, lever, trigger guard plate, magazine tube and loading gate; hammer block safety
Lever action with big-loop finger lever; side ejection; solid-top receiver; deeply blued metal surfaces; hammer block safety
Lever action; side ejection; solid-top receiver; deeply blued metal surfaces; hammer block safety
Lever action; side ejection; solid-top receiver; deeply blued metal surfaces; hammer block safety
Lever action with big-loop finger lever; side ejection; stainless steel receiver, barrel, lever, trigger guard plate, magazine tube and loading gate; hammer block safety
Stock American black walnut pistol-grip stock with fluted comb; cut checkering; rubber rifle butt pad; tough Mar-Shield finish; swivel studs
American black walnut straight-grip stock; cut checkering; ventilated recoil pad; tough Mar-Shield finish; swivel studs
American black walnut straight-grip stock; cut checkering; ventilated recoil pad; tough Mar-Shield finish; swivel studs
American pistol-grip two tone brown laminate stock; cut checkering; ventilated recoil pad; tough Mar-Shield finish; swivel studs
American black walnut pistol grip stock with fluted comb; cut checkering; rubber rifle butt pad; tough Mar-Shield® finish; swivel studs
American black walnut straight-grip stock; cut checkering; ventilated recoil pad; tough Mar-Shield finish; swivel studs
Black/grey laminated hardwood pistol-grip stock with fluted comb; cut checkering; deluxe recoil pad; nickel-plated swivel studs
Barrel 22" with deep-cut Ballard-type rifling (6 grooves)
18½" with deep-cut Ballard-type rifling (6 grooves)
18½" with deep-cut Ballard-type rifling (6 grooves)
18½" with deep-cut Ballard-type rifling (6 grooves)
22” with deep-cut Ballard-type rifling (6 grooves)
26” with deep-cut Ballard-type rifling (6 grooves)
18½” stainless steel barrel with deep-cut Ballard-type rifling (6 grooves)
Twist Rate
1:20" 1:20" 1:20" 1:20" 1:20" 1:20" 1:20”
Sights Adjustable semi-buckhorn folding rear sight, ramp front sight with brass bead and Wide-Scan hood. Solid-top receiver tapped for scope mount; offset hammer spur (right or left hand) for scope use.
XS Ghost Ring Sights with Hi-Viz® front post; Scout Scope Mount
Length 40½" 37" 37" 37" 40½" 44½" 37”
Length of Pull
13 3/8”
Approx. Weight
7 lbs. 7 lbs. 7 lbs. 7 lbs. 7 lbs. 8½ lbs. 8 lbs.
MSRP $696 $701 $837 $734 $669 $840 $1,070
BIG BORE CENTERFIRE RIFLES
Specifications subject to change without notice.26
Model 308MXLR 308MX 338MX 338MXLR
Caliber 308 Marlin Express (70491) 308 Marlin Express (70490) 338 Marlin Express (70492) 338 Marlin Express (70493)
Capacity 5-shot tubular magazine 5-shot tubular magazine 5-shot tubular magazine 5-shot tubular magazine
Action Lever action; side ejection; stainless steel receiver, barrel, lever, trigger guard plate, magazine tube and loading gate; hammer block safety; fluted bolt
Lever action; side ejection; solid-top receiver; deeply blued metal surfaces; hammer block safety
Lever action; side ejection; solid-top receiver; deeply blued metal surfaces; hammer block safety
Lever action; side ejection; solid-top receiver; deeply blued metal surfaces; hammer block safety
Stock Black/grey laminated hardwood pistol-grip stock with fluted comb, cut checkering, deluxe recoil pad; nickel-plated swivel studs
American black walnut pistol-grip stock; cut checkering; rubber rifle butt pad; tough Mar-Shield finish; swivel studs
American black walnut pistol-grip stock; cut checkering; rubber rifle butt pad; tough Mar-Shield® finish; swivel studs
American black walnut pistol-grip stock; cut checkering; rubber rifle butt pad; tough Mar-Shield® finish; swivel studs
Barrel 24" stainless steel barrel (6 grooves) 22" (6 grooves) 22” (6 grooves) 24” (6 grooves)
Twist Rate
1:12”
SightsAdjustable semi-buckhorn folding rear sight; ramp front sight with brass bead and Wide-Scan hood. Solid-top receiver tapped for scope mount; offset hammer spur (right or left hand) for scope use.
Length 42½" 40½" 40½” 42½”
Length of Pull
13 3/8”
Approx. Weight
7½ lbs. 7¼ lbs. 7½ lbs. 7¾ lbs.
MSRP $905 $686 $683 $900
308 MARLIN EXPRESS
SPECIFICATIONS
X7™ SERIESModel X7 Long Action X7 Short Action X7Y Short Action X7VH
Caliber25-06 Remington (70380) 270 Win. (70381) 30-06 Springfield (70382)
223 Remington (70950) 243 Win. (70384) 7mm-08 Remington (70385) 308 Win. (70386)
243 Win. (70387) 7mm-08 Remington (70388) 308 Win. (70389)
223 Remington (70954) 22-250 Remington (70336) 308 Win. (70337)
Capacity 4+1
223 Remington 5+1 243 Win. 7mm-08 Remington 4+1 308 Win.
4+1
223 Remington 5+1 22-250 Remington 4+1 308 Win.
Action Centerfire bolt-action, Pro-Fire® Adjustable Trigger; fluted bolt; two-position safety; red cocking indicator
Stock Pillar-bedded black synthetic with raised cheek piece and Soft-Tech® recoil pad
Barrel 22” precision button rifled, target crown (6 grooves) 26” heavy barrel (6 grooves)
Twist Rate 1:10"
243 Win.:1:10” 223 Remington: 1:9” 7mm-08 Remington: 1:9.5”308 Win.: 1:10”
243 Win.: 1:10” 7mm-08 Remington: 1:9.5" 308 Win.: 1:12"
223 Remington: 1:9”22-250 Remington: 1:14”308 Win: 1:12”
Sights No sights provided. Scope base included.
Length 42½" 42" 41" 46”
Length of Pull
13 ¼” 13 ¼” 12 ¼” 13 ¼”
Approx.Weight
6½ lbs. 6½ lbs. 6½ lbs. 7¾ lbs.
MSRP $403 $403 $403 $409
}
MarlinFirearms.com | 27
28 MarlinFirearms.com
SPECIFICATIONS
X7™ SERIES SYNTHETIC WITH SCOPEModel X7 Long Action X7 Short Action X7Y Short Action
Caliber 270 Win. (70326) | 30-06 Sprg. (70327) 243 Win. (70325) 243 Win. (70322) | 7mm-08 Remington (70323) | 308 Win. (70324)
Capacity 4+1
Action Centerfire bolt-action, Pro-Fire® Adjustable Trigger; fluted bolt; two-position safety; red cocking indicator
Stock Pillar-bedded black synthetic with raised cheek piece and Soft-Tech® recoil pad
Barrel 22” precision button rifled, target crown (6 grooves)
Twist Rate 1:10” 1:10”243 Win.: 1:10” 7mm-08 Remington: 1:9.5” 308 Win.: 1:10”
Sights Available with 3-9x40mm scope mounted and bore-sighted. Adjustable open rear sight, ramp front sight.
Length 42½” 42” 41”
Length of Pull 13 ¼” 13 ¼” 12 ¼”
Approx Weight 6 ½”
MSRP $457 $457 $457
Model XT-22 XT-22R XT-22SR XT-22RO Combo XT-22RZ XT-22VR
Caliber 22 LR (70759) 22 LR (70779) 22 LR (70801) 22 LR (70778) 22 LR (70763) 22 LR (70835)
Capacity 7-shot magazine 7-shot magazine 7-shot nickel plated magazine 7-shot magazine 7-shot magazine 7-shot magazine
ActionBlued bolt-action, thumb safety, red cocking indicator
Blued bolt-action, thumb safety, red cocking indicator
Stainless steel bolt-action, thumb safety, red cocking indicator
Blued bolt-action, thumb safety, red cocking indicator
Blued bolt-action, thumb safety, red cocking indicator
Blued bolt-action, thumb safety, red cocking indicator
Trigger Pro-Fire® Adjustable
Stock Monte Carlo walnut-finished hardwood with swivel studs, full pistol grip, tough Mar-Shield finish
Black synthetic stock with palm swell, full pistol grip, molded in swivels, and stippled grip areas
Black synthetic stock with palm swell, full pistol grip, molded in swivels, and stippled grip areas
Black synthetic stock with palm swell, full pistol grip, molded in swivels, and stippled grip areas
Black synthetic stock with palm swell, full pistol grip, molded in swivels, and stippled grip areas
Black synthetic Beaver-tail stock with palm swell, full pistol grip, molded in swivels, and stippled grip areas
Barrel 22" blued barrel with Micro-Groove® rifling (16 grooves)
22" blued barrel with Micro-Groove® rifling (16 grooves)
22" stainless steel barrel with Micro-Groove® rifling (16 grooves)
22" blued barrel with Micro-Groove® rifling (16 grooves)
22" blued barrel with Micro-Groove® rifling (16 grooves). Threaded muzzle (1/2" x 28 thread) for use with suppressors, includes thread protector.
22" blued heavy varmint barrel with Micro-Groove® rifling (16 grooves) and recessed muzzle
Twist Rate 1:16 1:16 1:16 1:16 1:16 1:16
Sights Adjustable rear sight, ramp front sights. Receiver grooved for scope mount, drilled and tapped for scope bases.
Adjustable rear sight, ramp front sights. Receiver grooved for scope mount, drilled and tapped for scope bases.
Adjustable semi-buckhorn folding rear sight, ramp front sight with high visibility orange front sight post, cutaway wide-scan hood. Receiver grooved for scope mount and drilled and tapped for scope bases.
3-9x32 scope and rings factory mounted and bore-sighted. Receiver grooved for scope mount, drilled and tapped for scope bases.
Includes rear and front scope bases only. Receiver grooved for scope mount, drilled and tapped for scope bases.
Includes rear and front scope bases only. Receiver grooved for scope mount, drilled and tapped for scope bases.
Length 41" 41" 41" 41" 41" 41"
Length of Pull
13 ¼”
Approx. Weight
6 lbs. 6 lbs. 6 lbs. 6½ lbs. 6 lbs. 7 lbs.
MSRP $239 $229 $339 $269 $269 $239
XT™-22 SERIES
Specifications subject to change without notice.28
SPECIFICATIONS
Model XT-22TR XT-22TSR XT-22M XT-22MR XT-22MTR XT-22MVSR XT-22MTSL XT-22MTW
Caliber 22 S, L, LR (70821) 22 S, L, LR (70823) 22 WMR (70791) 22 WMR (70783) 22 WMR (70859) 22 WMR (70831) 22 WMR (70855) 22 WMR (70851)
Capacity Tubular magazine holds 25S, 19L, 17LR
Tubular magazine holds 25S, 19L, 17LR
4-shot and 7-shot magazines
4-shot and 7-shot magazines
12-shot tubular magazine
4-shot and 7-shot magazines
12-shot tubular magazine
12-shot tubular magazine
Action Blued bolt-action, thumb safety, red cocking indicator
Stainless steel bolt-action, thumb safety, red cocking indicator
Blued bolt-action, thumb safety, red cocking indicator
Blued bolt-action, thumb safety, red cocking indicator
Blued bolt-action, thumb safety, red cocking indicator
Stainless steel bolt-action, thumb safety, red cocking indicator
Stainless steel bolt-action, thumb safety, red cocking indicator
Blued bolt-action, thumb safety, red cocking indicator
Trigger Pro-Fire® Adjustable
Barrel Black synthetic stock with palm swell, full pistol grip, molded in swivels, and stippled grip areas
Monte Carlo walnut-finished hardwood with swivel studs, full pistol grip, tough Mar-Shield finish
Black synthetic stock with palm swell, full pistol grip, molded in swivels, and stippled grip areas
Monte Carlo laminated two-tone brown hardwood with nickel-plated swivel studs and rubber rifle butt pad, tough Mar-Shield finish
Monte Carlo genuine black walnut with swivel studs, full pistol grip, and classic cut checkering, rubber rifle butt pad, tough Mar-Shield finish
Barrel 22" blued barrel with Micro-Groove®
rifling (16 grooves)
22" stainless steel barrel with Micro-Groove® rifling (16 grooves)
22" blued barrel with Micro-Groove® rifling (20 grooves)
22" blued barrel with Micro-Groove® rifling (20 grooves)
22" blued barrel with Micro-Groove® rifling (20 grooves)
22" stainless steel heavy varmint barrel with Micro-Groove® rifling (20 grooves) and recessed muzzle
22" stainless steel barrel with Micro-Groove® rifling (20 grooves)
22" blued barrel with Micro-Groove® rifling (20 grooves)
Twist Rate 1:16
Sights Adjustable rear sight, ramp front sights. Receiver grooved for scope mount, drilled and tapped for scope bases.
Adjustable semi-buckhorn folding rear sight, ramp front sight with high visibility orange front sight post, cutaway Wide-Scan hood. Receiver grooved for scope mount and drilled and tapped for scope bases.
Adjustable open rear sight, ramp front sights. Receiver grooved for scope mount, drilled and tapped for scope bases.
Includes rear and front scope bases only. Receiver grooved for scope mount, drilled and tapped for scope bases.
Adjustable semi-buckhorn folding rear sight, ramp front sight with high visibility orange front sight post, cut-away Wide-Scan hood. Receiver grooved for scope mount and drilled and tapped for scope bases.
Length 41”
Length of Pull
13 ¼”
Approx. Weight
6 lbs. 6 lbs. 6 lbs. 6 lbs. 6 lbs. 6½ lbs. 6 lbs. 6 lbs.
MSRP $235 $299 $269 $259 $269 $345 $379 $345
XT™-22 SERIES (CONTINUED)
MarlinFirearms.com | 29
30 MarlinFirearms.com
SPECIFICATIONS
Model XT-22YR (Youth)
Caliber 22 Long Rifle (70691)
Capacity 7-shot magazines Single Shot Adapter
Action Blued bolt-action, thumb safety, red cocking indicator
Trigger Pro-Fire® Adjustable
Stock Measured youth black synthetic stock, full pistol grip, molded in swivels, and stippled grip areas. (12" length of pull)
Barrel 16¼" blued barrel with Micro-Groove® rifling (16 grooves)
Model XT-22YR (Youth)
Twist Rate 1:16
Sights Adjustable open rear sight, ramp front sights. Receiver grooved for scope mount, drilled and tapped for scope bases.
Length 33½"
Length of Pull 11 ¼”
Approx. Weight 4½ lbs.
MSRP $239
XT™-22 YOUTH SERIES
Model XT-17R XT-17V XT-17VR XT-17VO XT-17VSL
Caliber 17 HMR (70701) 17 HMR (70712) 17 HMR (70721) 17 HMR (70713) 17 HMR (70723)
Capacity 4-shot and 7-shot magazines 4-shot and 7-shot magazines 4-shot and 7-shot magazines 4-shot and 7-shot magazines 4-shot and 7-shot nickel-plated magazines
Action Blued bolt-action, thumb safety, red cocking indicator
Blued bolt-action, thumb safety, red cocking indicator
Blued bolt-action, thumb safety, red cocking indicator
Blued bolt-action, thumb safety, red cocking indicator
Stainless steel bolt-action, thumb safety, red cocking indicator
Trigger Pro-Fire® Adjustable
Stock Black synthetic stock with palm swell, full pistol grip, molded in swivels, and stippled grip areas
Monte Carlo walnut-finished hardwood with swivel studs, full pistol grip, tough Mar-Shield finish
Black synthetic Beaver-tail stock with palm swell, full pistol grip, molded in swivels, and stippled grip areas
Monte Carlo walnut-finished hardwood with swivel studs, full pistol grip, tough Mar-Shield finish
Monte Carlo laminated grey/black hardwood stock with nickel-plated sling swivel studs, full pistol grip, rubber rifle butt pad, tough Mar-Shield finish
Barrel 22" blued sporter barrel
22" blued heavy varmint barrel 22" blued heavy varmint barrel 22" blued heavy varmint barrel 22" stainless steel heavy varmint barrel
Twist Rate 1:9 1:9 1:9 1:9 1:9
Sights Adjustable open rear sight, ramp front sights. Receiver grooved for scope mount, drilled and tapped for scope bases.
Includes rear and front scope bases only. Receiver grooved for scope mount, drilled and tapped for scope bases.
Includes rear and front scope bases only. Receiver grooved for scope mount, drilled and tapped for scope bases.
3-9x32 blued scope mounted and bore-sighted
Includes rear and front scope bases only. Receiver grooved for scope mount, drilled and tapped for scope bases.
Length 41" 41" 41" 41" 41"
Length of Pull 13 ¼”
Approx.Weight
6 lbs. 6½ lbs. 6½ lbs. 6½ lbs. 7 lbs.
MSRP $269 $299 $289 $339 $429
XT™-17 BOLT ACTION
Specifications subject to change without notice.30
Weights, stock dimensions, checkering pattern and wood grain may vary according to the individual firearm. Marlin Firearms reserves the right to change or modify
its products without notice. Pricing may vary by model, specification, color, size and availability. Follow the safety rules printed in firearms instruction books and
on ammunition boxes. If you do not have an instruction book for your Marlin firearm, write to Marlin Firearms, P.O. Box 1871, Madison, NC 27025 for a free copy or
visit our website at www.marlinfirearms.com. Please specify the model and serial number. The firearms herein have been photographed with the actions closed
to properly showcase their features. In actual practice, any firearm not in use must be left with the ammunition removed, action open and safety on. Consumer
Information, Arms Service, Parts and Repairs: 800-544-8892. Visit us on the web at www.marlinfirearms.com.
SPECIFICATIONS
Model 60 60C 60SB 60SN, 60SN w/Scope 60SS
Caliber 22 Long Rifle Only (70620) 22 Long Rifle Only (70624) 22 Long Rifle Only (70630) 22 Long Rifle Only (70650)22 Long Rifle w/Scope (70651)
22 Long Rifle Only (70660)
Capacity 14-shot tubular magazine with patented closure system
Action Autoloading; side ejection; manual and automatic “last-shot” bolt hold open; receiver top has serrated, non-glare finish; cross-bolt safety
Autoloading; side ejection; manual and automatic “last-shot” bolt hold open; receiver top has serrated, non-glare finish; cross-bolt safety
Autoloading; side ejection; manual and automatic “last-shot” bolt hold open; cross-bolt safety; stainless steel barrel
Autoloading; side ejection; manual and automatic “last-shot” bolt hold open; receiver top has serrated, non-glare finish; cross-bolt safety
Autoloading; side ejection; manual and automatic “last-shot” bolt hold open; cross-bolt safety; stainless steel barrel
Stock Monte Carlo walnut-finished laminate; full pistol grip; tough Mar-Shield finish
Monte Carlo synthetic with Realtree® Hardwoods™ camouflage pattern; full pistol grip
Monte Carlo walnut-finished laminate; full pistol grip; tough Mar-Shield finish
Black fiberglass-filled synthetic stock with swivel studs; full pistol grip and molded-in checkering
Monte Carlo laminated two-tone black/grey hardwood; full pistol grip; tough Mar-Shield finish; rubber rifle butt pad; nickel-plated swivel studs
Barrel 19" with Micro-Groove® rifling (16 grooves)
Twist Rate 1:16" 1:16" 1:16" 1:16" 1:16"
Sights Adjustable open rear sight, ramp front sight. Receiver grooved for scope mount.
Adjustable open rear sight, ramp front sight. Receiver grooved for scope mount.
Adjustable semi-buckhorn folding rear sight, ramp front sight with high-visibility post and cutaway Wide-Scan hood. Receiver grooved for scope mount.
60SN – Adjustable open rear sight, ramp front sight. Receiver grooved for scope mount. 60SN w/Scope – Available with 4x20mm scope and mounts. Adjust able open rear sight; ramp front sight.
Adjustable semi-buckhorn folding rear sight, ramp front sight with high-visibility post and cutaway Wide-Scan hood. Receiver grooved for scope mount.
Length 37½"
Length of Pull 13 ¼”
Approx. Weight 5½ lbs. 5½ lbs. 5½ lbs. 5½ lbs. 60SN 6 lbs 60SN with Scope 5½ lbs.
MSRP $199 $234 $252 $191 (70650) / $207 (70651) $301
Model Golden 39A (Take down) 795 795 Combo 795SS 70PSS (Take down)
Caliber 22 Short, Long or Long Rifle (70600) 22 Long Rifle only (70680) 22 Long Rifle only (70681) 22 Long Rifle only (70682) 22 Long Rifle only w/ carry case (70670)
Capacity Tubular magazine with patented closure system, holds 26 Short, 21 Long, or 19 Long Rifle Cartridges
10-shot nickel-plated magazine
10-shot nickel-plated magazine
10-shot nickel-plated magazine
7-shot nickel-plated magazine
Action Lever action; solid-top receiver; side ejection; rebounding hammer; hammer block safety; one-step takedown; deeply blued metal surfaces; gold-finished steel trigger
Autoloading; side ejection; automatic “last-shot” bolt hold-open; manual bolt hold-open; cross-bolt safety
Autoloading; side ejection; automatic “last-shot” bolt hold-open; manual bolt hold-open; cross-bolt safety
Nickel-plated autoloading; side ejection; automatic “last-shot” bolt hold-open; manual bolt hold-open; cross-bolt safety
Stock Genuine American black walnut with fluted comb; cut checkering; full pistol grip and fore-end; blued steel fore-end cap; swivel studs; grip cap; rubber butt pad; tough Mar-Shield finish
Monte Carlo black fiberglass-filled synthetic with swivel studs
and molded-in checkering
Monte Carlo black fiberglass-filled synthetic with nickel-plated swivel studs and molded-in checkering
Monte Carlo black fiberglass-filled synthetic with abbreviated fore-end, nickel-plated swivel studs and molded-in checkering
Barrel 24" with Micro-Groove® rifling (16 grooves)
18" with Micro-Groove® rifling (16 grooves) 18" stainless steel with Micro-Groove® rifling (16 grooves)
16¼" stainless steel with Micro-Groove® rifling (16 grooves)
Twist Rate
1:16" 1:16" 1:16" 1:16" 1:16"
Sights Adjustable semi-buckhorn folding rear sight, ramp front sight with brass bead and Wide-Scan hood. Solid top receiver tapped for scope mount; scope adapter base; offset hammer spur (right or left hand) for scope use.
Adjustable open rear sight, ramp front sight. Receiver grooved for scope mount.
4x20 scope mounted and bore-sighted, adjustable open rear sight, ramp front sight
Adjustable semi-buckhorn folding rear sight, ramp front sight with high-visibility post and cutaway Wide-Scan hood. Receiver grooved for scope mount.
Adjustable open rear sight, ramp front sight with high-visibility orange post; cutaway Wide-Scan hood. Receiver grooved for s cope mount.
Length 40" 37" 37" 37" 35¼"
Length of Pull 13 ¼”
Approx. Weight 6½ lbs. 4½ lbs. 4½ lbs. 4½ lbs. 3¼ lbs.
MSRP $709 $183 $221 $262 $345
39A & 795 SERIES
MODEL 60 RIMFIRE
MarlinFirearms.com | 31
MN118007
MARLIN FIREARMS P.O. BOX 1871 • MADISON, NC 27025 800-544-8892 • WWW.MARLINFIREARMS.COM
MARLIN, MICRO-GROOVE, PRO-FIRE, SOFT TECH, X7 AND XT ARE TRADEMARKS OF RABRANDS, L.L.C.. XS IS A TRADEMARK OF XS SIGHT SYSTEMS, INC..
REALTREEHARDWOODS HD IS A TRADEMARK OF JORDAN OUTDOOR ENTERPRISES, LTD.. HIVIZIS A TRADEMARK OF NORTH PASS LTD.. MARSHIELD IS A
TRADEMARK OF THE MARSMETAL COMPANY.
© 2014 MARLIN FIREARMS, MADISON, NC 27025