Post on 23-Nov-2015
transcript
U.S. Drives Technical Support Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, Email: support@drives.ra.rockwell.com, Online: www.ab.com/support/abdrives
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication D2-3205 September 1991 Copyright 1991 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
Front CoverTable of Contents1 - Receive and Accept the Network Adapter ModuleScope of this ManualReceive and Accept the ShipmentLocal Reliance Sales & Service OfficesReference Documentation
2 - Introduction to the Network Adapter ModuleProduct DescriptionSpecificationsControls and Indicators
3 - Installation & WiringPlan the InstallationSelect the LocationMount the Network Adapter ModuleInstalling the Network Adapter Module 60-pin, Two-Connector Ribbon Cable (No Signal Interface Kit Installed)Installing the Network Adapter Module 60-pin, Three-Connector Ribbon Cable (Signal Interface Kit Installed)Connection to the AutoMax/DCSStart-Up
4 - Software Interface: AutoMax/DCS to MaxPak IIIIntroductionNETDEF StatementsMaxPak III to AutoMax/DCS Variable MappingMicrobus Slot NumberSetting Net_Drop_Depth%Multiple Drop DepthDrive Fault InterlocksData TransferDownloadSystem InitializationInitialization ErrorsProgramming Example
5 - TroubleshootingTest Equipment NeededCircuit DescriptionTroubleshooting the Network Communications Module (0-57404-2)
6 - Replacement PartsA - Verify Errors and ActionsB - Download Errors and ActionsC - Network Adapter Module Peripheral Error Codes and ActionsD - Glossary of TermsIndexDocumentation Improvement FormD-C Drives Training and Audio/Visual ProductsBack Cover
Text4: