Post on 30-Jun-2018
transcript
MECHANICAL CONNECTORS
Who we areOne Company, Total Support, Complete Solutions
Hydratight is a dynamic innovator of engineering solutions to its customers’ problemsin the field of mechanical jointing and coupling and continues to set international stan-dards in joint integrity for its customers on a global scale.
Hydratight offers a comprehensive range of quality products and services worldwide,supported by strong, experienced engineering teams. Since developing the technol-ogy of hydraulic bolt tensioning in the early 1970’s to solve the problem of leakingjoints, Hydratight has continued to push back the technological frontiers with manynew and innovative engineering products for bolting, joint integrity and pipe connec-tion and repair systems.
One Company - Meets StandardsTotally committed to safety and quality, all Hydratight products and services are de-signed, manufactured and carried out within a management system in accordancewith ISO 9001: 2008 (Quality Management), ISO 14001: 2004 (Environmental Manage-ment) and OHSAS 18001:2007 (Occupational Health and Safety).
Our continuous emphasis on research and development enables us to continue to offer engineering solutions throughout the world.
Morgrip Weldless Mechanical ConnectorsMorgrip is a range of mechanical pipe connectors which provide high integrity con-nections for all types of metal pipe work, on-shore, off-shore and subsea. Used to replace the need for the welding, they are based upon a unique and patented pipe gripping and sealing system which allows the couplings to withstand high internal pressure and load conditions.
The Morgrip product has over 20 years of proven leak-free service history for perma-nent usage, and can be used for all sizes up to 42" and pressure ratings of metal pipes up to 2500 lbs, in critical and non-critical service.
Hydratight’s innovative designs have produced a pipe connection which is equivalentin strength and sealing performance to that of a welded joint. This can be reliablyachieved without hot work and far more safely, simply and quickly than a welded joint.
Morgrip has full-type approval of DNV and Lloyds Register and carries the API monogram.
P-1200492/00043(E4) 06-LD219928/1-PDALRQ 0912064
Morgrip is available in a variety of formats, including standard flange ter-mination, and the unique pipe-to-pipe direct coupling connector. All formats suit specific applications, whether for use on carbon steel,stainless steel or duplex pipes.
Other standard products including swivel flanges are available.
HydrocarbonHydratight is a world leader in providing joint integrity solutions to the oil & gas and petrochemical industries; offering products for sale or rent, aswell as onsite services delivered through our extensive worldwide networkof skilled technicians. Our services include:
• Torque and tension bolting equipment• Portable machining equipment• Product sales, rental and technical support• Product service and training
Building upon the company’s unique experience in bolt tensioning,torquing and on-site machining, Hydratight combines innovative manage-ment practices with a unique range of products and services to ensureminimum cost/minimum time solutions in the construction and mainte-nance of process plant and pipe work.
Power GenerationHydratight’s power generation division first developed products and serv-ices which are now commonplace within the industry including the hy-draulic tensioning of bolts on gas and steam turbines and manway coverson nuclear steam generators.
General EngineeringOur general engineering division provides a comprehensive range of boltand stud tightening and ultrasonic load monitoring products and servicesfor all major capital plants including diesel engines, mining machinery,presses, pumps and steel mills.
Morgrip Weldless Mechanical ConnectorsMorgrip has gained an enviable track record having beenused by the majority of major energy companies for bothpipeline tie-in’s and emergency repairs for thousands of criti-cal topside and subsea applications.
The Morgrip range of connectors offers versatile solutions to the problem of bare pipe connection. Its design is adapted to suit applications ranging from high temperature, high pressurehydrocarbon service lines, fitted on the topside of offshoreplatforms, through to the supply of connectors capable ofbeing remotely installed in over 3,280ft of water.
The system provides a connection that is equal in strength toa weld and has DNV and Lloyds Type approvals, stating thatthe couplings may be used as a permanent or temporary sub-stitute for welded connections.
Construction
1
1
2
2
3
3
4
4
5
9
11
Riser SystemsHydratight’s range of riser hang off systems provide hangoff solutions for pre-stressed, retrofit, turret based and steelcatenery applications.
The pre-stressed hang off allows high temperature, highload risers to be locked in position at the hang off point tominimize load transfer effects.
The Retrofit system has the ability to lock rigid risers in po-sition as they are pulled through existing or pre-installed j-tubes on a fixed platform.
For turret based FPSOs, Hydratight offers a hang off whichenables the flexible riser to be pulled into and locked in theturret before the flexible is released and pulled through to itsupper connection.
The increased use of steel catenery risers for deepwater ap-plications has led to Hydratight developing a rotary hang offsystem.
Remote TechnologyThe oil and gas industry’s requirement to develop deepwaterfields has enabled Hydratight to further develop its remotetechnology. This generation of remote Morgrip connectorshas led to the development of remote bolting systems,which allow both connectors and clamps to be bolted se-curely without the need for diver intervention. These diver-less repairs have been performed on pipelines with adiameter of up to 30", however the technology has full ap-proval for up to 42" diameter.
Capability The continued development of the Morgrip technology has enabled Hy-dratight to expand its product range to include riser hang off systems, re-mote bolting systems and repair sleeve clamps.
6
6
5
7
7
8
8
9
RepairsAlthough Morgrip is used extensively on newconstruction projects, the connector was ini-tially developed for, and is still widely used forpipeline repairs.
The versatility of the connector design enablesit to be used in many different scenarios,whether making a bare pipe repair or insertingflanged spools.
As well as providing connectors for permanentpipeline repairs, Hydratight has also suppliedtemporary repair clamps, capable of sealingminor pipeline leaks or restoring the structuralintegrity of damaged or corroded pipes.
Morgrip is now the accepted and preferred re-pair system for many oil & gas operatorsworld-wide. The industry’s confidence in Hy-dratight’s products and capability has led tothe organization establishing an EmergencyPipeline Repair Club initially for the North Sea,but now covering other key oil and gas loca-tions around the world.
Repair
10
10
11
12
12
13
13
431
2
5
910
11
14
31
3233
2524
15
20 2627
23
28
12
30
29
13
6
8
19
22
21
7
18
1. USA - SACRAMENTO, CAT: +1 916 452 3125E: sacramento@hydratight.com
2. USA - LONG BEACH, CAT: +1 310 549 4100E: longbeach@hydratight.com
3. USA - RED WING, MNToll Free: 800 283 1937T: +1 651 388 8661E: redwing@hydratight.com
4. USA - ANTIGO, WIT: +1 715 627 5500E: antigo@hydratight.com
5. USA - HOUSTON, TXToll Free: 800 895 3849T: +1 713 860 4200E: houston@hydratight.com
6. USA - ORANGE, TXToll Free: 888-644-9372T: +1 409 745 5800E: orange@hydratight.com
7. USA - GONZALES, LAToll Free: 888 644 8168T: +1 225 644 8168E: gonzales@hydratight.com
8. USA - MOORESBORO, NCToll Free: 866 453 0640T: +1 828 453 0640E: mooresboro@hydratight.com
9. BRAZIL - NITERÓIT: +55 (21) 2720 0380E: rio@hydratight.com
10. BRAZIL - MACAÉT: +55 (22) 2773 6605E: macae@hydratight.com
11. UK - WALSALL T: +44 (0) 121 50 50 600E: walsall@hydratight.com
12. UK - MORPETHT: +44 (0) 1670 515 432E: morpeth@hydratight.com
13. UK - ABERDEENT: +44 (0) 1224 215 930E: aberdeen@hydratight.com
14. FRANCE - BEZONST: +33 (0) 1 34 10 57 17E: france@hydratight.com
15. ITALY - CORSICOT: +39 (0) 2 48611133E: italy@hydratight.com
16. GERMANY - KERPENT: +49 (0) 22 37 92 30 10E: germany@hydratight.com
17. HOLLAND - BREDAT: +31 (0) 76 572 4550E: holland@hydratight.com
18. HOLLAND - ALKMAART: +31 (0) 72 511 8899E: holland@hydratight.com
19. NORWAY - STAVANGERT: +47 51 73 35 35E: norway@hydratight.com
20. EGYPT - CAIROT: +202 2 7046800E: egypt@hydratight.com
21. AZERBAIJAN - BAKUT: +994 12 545 9147E: baku@hydratight.com
22. KAZAKHSTAN - ATYRAUT: +7 7122 971095E: atyrau@hydratight.com
23. KUWAIT - SAFATT: +965 2 3263811E: kuwait@hydratight.com
24. SAUDI ARABIA - DAMMAMT: +966 3 833 8600E: saudi@hydratight.com
25. QATAR - DOHAT: +974 460 0350E: qatar@hydratight.com
26. UAE - ABU DHABIT: +971 2 6781133E: uae@hydratight.com
27. OMAN - MUSCATT: +968 2 4455627E: oman@hydratight.com
28. ANGOLA - LUANDAT: +33 (0) 6 28 58 28 03E: angola@hydratight.com
29. INDIA - MUMBAIT: +91 265 232 4255E: india@hydratight.com
30. SINGAPORET: +65 6515 4971E: singapore@hydratight.com
31. CHINA - TAICANGT: +86 512 5328 7500E: china@hydratight.com 32. AUSTRALIA - PERTHT: +61 8 9353 1659E: perth@hydratight.com
33. AUSTRALIA - QUEENSLANDT: +61 (0)7 3264 7719E: queensland@hydratight.com
1617
Material sourced from fully sustainable, managed forestsusing Elemental Chlorine Free fiber.
HT/MOR/US/02-10
www.hydratight.com
Global Standards Local Delivery
Contact