Post on 03-Aug-2020
transcript
MEDICAL FACE MASK
Product Type: 3-Ply Disposable Medical Face Mask (Non-Sterile)
Quality Standard: YY-T0969-2013 (Disposable Daily Mask) CE & FDA
Rating: ASTM Level 1 - Meets EN 14683 Rating – Type II Standard
Protection Level: 0.1 Micron particle filtration and 3 micron bacteria filtration efficiency at ≥ 95%
Filter Testing Subject Efficiency: Bacterial aerosol MPS: 3um
Key Parameters:
Low Fluid Resistance: 80mmHg
Filtration Efficiency: BFE ≥ 95%, PFE ≥ 95% @ 0.1 Micron
Breathability – Deta P: < 4.0mm H₂O/cm²
Flame Spread: Class 1
Filter layer: Meltblown Fabric
Weight: 3ply: 25 + 25 + 25 G/M2
Color: Blue
Size: One size for adult with earloops and adjustable nosepiece
Our standard 3-ply face masks provide basic
protection for medical staff. They are suitable
for general patient care and procedures where
there is no risk of exposure to blood and/or
body fluids.
Our masks are fabricated using lightweight
materials for maximum breathing comfort, with
minimal risk of skin irritation and high level
protection.
Quantity Per Box: 50
Boxes Per Carton: 40
Total Masks Per Carton: 2000
Carton Size:52cm x 38cmm x 34cm
BFE ≥ 95% AT 3 MICRONS | PFE ≥ 95% AT 0.1 MICRONS
OUTER PROTECTIVE LAYER1
Colored to distinguish from fluid resistant face masks and ensures the user wears the mask the correct way
FILTER LAYER2
0.1 Micron particle filtration and 3 micron bacteria filtration efficiency at ≥ 95%
INNER COMFORT LAYER3
Users may wear the masks comfortably for an extended period