Merritt Machinery

introduces

100% Dust-Free Sanding

Wide belt wet sander for coated panel surfaces (plywood, fiberboard, polymer, etc.)

Also for primer or intermediate coated surfaces

Maximum panel width 49-1/2”

Panel thickness 1/10” to 2”

High capacity – up to 160 ft/min

Environmentally friendly

No ductwork or exhaust system required

Simple installation

Cushioned spiral-grooved drum smooths out uneven surfaces

2 -3 times longer belt life compared to conventional sanding

Water circulates around the sanding belt, collecting all sanding dust/UV particles

Contaminated water is filtered through Perlite

Clean water is recirculated back through the sander

An industrial mineral with excellent filtering characteristics

Non-hazardous

White to off-white granules, no odor

Fully oxidized, non-flammable and non-combustible

No special treatment for disposal

See it in action in Building B, Booth 6053