Post on 28-May-2018
transcript
Roof tiles to overlap apron lip by 20mm minimum
Internal sizestaken from here
(size ordered = size of timber structural opening)
Tile Battens to be ran upto the side of the flashing tray
Roofing underfelt to be fitted onto roof, flush to the edge of the structural opening prior to fitting rooflight
White powder coatedinternal trim (factory applied)
Plywood Deck
Max 12mmPlasterboard
Minimum fall 15 (inc roof) Maximum fall 75 (inc roof)
Screw fix timber kerb to fix luxlite to roof using brackets and screws provided - refer to step by step guide used Do not lift by glass
Lift from here (apron lip)
Plasterboard to be finished as illustrated. Run into dedicated white internal trim, this will also act as your stop bead to ensure a neat finish
Approx. 1:10 @A4
LUXLITE DOUBLE GLAZED (FIXED) SKYLIGHT - TYPICAL FITTING GUIDELINES - WARM DECK ROOF
CS
07/12/2017
SM
ROOF-maker1 Pinfold Road , ThurmastonLeicester, LE4 8ASTel: 0116 269 6297Fax: 0116 269 6291Email: sales@roof-maker.co.uk
Title:
THIS DRAWING IS FOR REFERENCE ONLY. PLEASE REPORTANY DISCREPANCIES TO THE DESIGNER BEFORE ANY WORKSCOMMENCE. ALL DIMENSIONS ARE IN mm. ALL DIMENSIONS TO BE CHECKED ON SITE BEFORE ANY WORKS COMMENCE.
Date:
Drawn: Checked:
Scale:
Roof tiles to overlap apron lip by 20mm minimum
Internal sizestaken from here
(size ordered = size of timber structural opening)
Roof Tiles
Tile Battens to be ran upto the side of the flashing tray
Roofing underfelt to be fitted onto roof, flush to the edge of the structural opening prior to fitting rooflight
White powder coatedinternal trim (factory applied)
Plywood Deck
Max 12mmPlasterboard
Minimum fall 15 (inc roof) Maximum fall 75 (inc roof)
Do not lift by glass
Lift from here (apron lip)
Screw fix timber kerb to fix luxlite to roof using brackets and screws provided - refer to step by step guide used
Plasterboard to be finished as illustrated. Run into dedicated white internal trim, this will also act as your stop bead to ensure a neat finish
Approx. 1:10 @A4
LUXLITE TRIPLE GLAZED (FIXED) SKYLIGHT - TYPICAL FITTING GUIDELINES - WARM DECK ROOF
CS
07/12/2017
SM
ROOF-maker1 Pinfold Road , ThurmastonLeicester, LE4 8ASTel: 0116 269 6297Fax: 0116 269 6291Email: sales@roof-maker.co.uk
Title:
THIS DRAWING IS FOR REFERENCE ONLY. PLEASE REPORTANY DISCREPANCIES TO THE DESIGNER BEFORE ANY WORKSCOMMENCE. ALL DIMENSIONS ARE IN mm. ALL DIMENSIONS TO BE CHECKED ON SITE BEFORE ANY WORKS COMMENCE.
Date:
Drawn: Checked:
Scale:
Roof tiles to overlap apron lip by 20mm minimum
Plywood deck
Do not lift from glass
Roofing underfelt to be fitted ontoroof, flush to the edge of thestructural opening prior to fittingrooflight
Plasterboard to be finished asillustrated. Run into dedicated whiteinternal trim, this will also act as yourstop bead to ensure a neat finish
Tile Battens to be ran upto theside of the flashing tray
White powder coated internal trim (factory applied)
Max 12mmplasterboard
Screw fix timber kerb to fix luxlite to roof using screws provided - refer to step by step guide used
Lift from here (apron lip)
Internal sizestaken from here
(size ordered = size of timber structural opening)
Minimum fall 15 (inc roof)Maximum fall 75 (inc roof)
LUXLITE TRIPLE GLAZED (HINGED OPENING) SKYLIGHT - FITTING GUIDELINES - WARM DECK ROOF
31/01/2018CS SM
ROOF-maker1 Pinfold Road , ThurmastonLeicester, LE4 8ASTel: 0116 269 6297Fax: 0116 269 6291Email: sales@roof-maker.co.uk
Title:
THIS DRAWING IS FOR REFERENCE ONLY. PLEASE REPORTANY DISCREPANCIES TO THE DESIGNER BEFORE ANY WORKSCOMMENCE. ALL DIMENSIONS ARE IN mm. ALL DIMENSIONS TO BE CHECKED ON SITE BEFORE ANY WORKS COMMENCE.
Date:
Drawn: Checked:
Scale:
Approx 1:3 @A4