©Mirra Technologies

MIRRA CHARTS INSTALLATION GUIDE

©Mirra Technologies

Mirra Chart Installation Guide.

Step 1:

Browse for mirra charts or Click on the following link https://www.mirracharts.com/downloads/

Step 2:

Right Click on the Downloaded file and Select properties.

©Mirra Technologies

Step 3:

Select the UNBLOCK check-box and click on OK button.

Step 4:

Click On the NEXT button.

©Mirra Technologies

Step 5:

Click on INSTALL button.

Step 6:

Click on FINISH button.

©Mirra Technologies

Step 7:

Open Ninjatrader 8 application. Select NEW option from the task bar and click on

CHART

Step 8:

Click on the Search icon button.

©Mirra Technologies

Step 9:

Enter the desired Symbol/scrip name in the box. Select and click OK.

Step 10:

Make the needed configuration in the data series box like (Type –“Minutes” , Values

– “1”, Days to Load – “20(days)” etc.) and click on OK.

©Mirra Technologies

Step 11:

Select the Indicator icon(On top of the tab).

Step 12:

In this POP-UP scroll In available indicator for Mirra TPO and double click on it.

©Mirra Technologies

Step 13:

Now on the Right side layout make the needed changes and Click on OK button.

Step 14:

Now the Mirra TPO has been added successfully.