Post on 03-Jul-2020
transcript
Customer Support | certainteed.com/ceilings | 800-233-8990
LINEAR PLANKS & MODULES Wood Ceilings & Walls
This versatile line of linear planks & panelized modules offers a multitude of finish options and easy installation methods to seamlessly create a continuous, linear visual.
FEATURES AND BENEFITSSolid Wood Planks:• Solid wood options available in 6 simulated
solid wood finishes• Available in 2 plank widths with 3/4" felt reveal
(3-3/4" or 5-1/4")
Solid Wood and Veneered Modules:• 1' x 8' modules available in solid wood or
veneer finishes and 2 plank patterns• Simple direct-mount installation
• Achieve up to 0.40 NRC with acoustic infill
Veneered Planks:• Available in 14 standard veneers
• 4 tongue and groove options including channeled and solid visuals for design flexibility and acoustic performance
• Achieve up to NRC 0.80 with channeled options or 0.40 with acoustical infill
SOLID WOOD FINISHES (AVAILABLE FOR OPEN REVEAL PLANKS & MODULES)
APPLICATIONS• Open Offices
• Libraries
• Conference Rooms
• Lobbies & Atria
• Hospitality
• Retail
LEED® v4
All products are made-to-order and project specific. LEED credit vary by project. Please contact your local CertainTeed sales representative for specific LEED credit opportunities related to your project.
Addtional special order species and finishes available. Please contact your local sales representative for more information.
* Actual veneer shades or grains may vary. Request a sample for more accurate finish portrayal. Additional special order veneers and finishes available. Please contact your local sales representative for more information.
VENEERS:
Natural Cherry (VPC0)
Plain Slice Veneers Reconstituted VeneersBamboo Veneers
Medium Brown Cherry (VPCB)
Red Oak (VOC0)
Steamed European Beech (VEB0)
Walnut Coffee (VWPC)
Medium Red Cherry (VPCR)
Walnut (VWP0)
Maple (VMC0)
Maple (RMC0)
Walnut (RWN0)
Quartered Blonde (RQB0)
Cherry (RRC0)
Narrow Cane Bamboo Caramel(BNC0)
Narrow Cane Bamboo Natural (BNN0)
Simulated Beech (WBAK)
PATTERN CONSIDERATIONS
Backers and Dowels are 1/16" short of the module width. This allows for thebacker to expand and contract. Each module is centered by the installer.
Typically there is a 1/2" or 1" gap separating panel lengths, which allows fornatural expansion and contraction of wood. This design is fully accessible atany location for maintenance within the plenum area. Gaps can be spacedeither randomly or symmetrically. It is important to specify the length of thepanel and/or the desired gap when determining the layout of the ceiling.The standard module is 1' x 8', however, we often let the layout of the spacedetermine the best module size to reduce field trimming and waste. Pleaseconsult Norton Industries for limitations and options.
staggered joints symmetrical joints
W O O D G R I L L E
*MAPLE, SELECT WHITE, PLAIN SLICE(PWM)
*OAK, RED, PLAIN SLICE (PRO)
*OAK, RED, RIFTCUT (RRO)
MR Credit 2.1/2.2Construction Waste Management
MR Credit 4.1/4.2Recycled ContentMR Credit 5.1/5.2Regional Materials (location dependent)
MR Credit 7.0Certified WoodEQ Credit 3.1/3.2Construction IAQ Management PlanEQ Credit 4.1/4.2/4.4Low Emitting Materials
available leed© credits
MR Credit 3.1/3.2Materials Reuse
There are many other veneer options available.
For inquiries, please call us at 888.357.2345
Note: the veneer colors and grain shown here
are representative of the species only.
ASH (AS) BIRCH (BI) CHERRY (CH) DOUGLAS FIR,MIXED GRAIN (MDF)
HEMLOCK,MIXED GRAIN (MH)
VENEER SELECTION * Standard veneers
HEMLOCK,VERTICAL GRAIN (VH)
POPLAR (PL) RED OAK (RO) WALNUT (WN) WESTERN REDCEDAR (WRC)
WHITE MAPLE (WM) WHITE OAK (WO)
PARTICLE BOARD(PB)
PLAIN MDF (MDF)
UN-WRA PPED
TEXTURE SAWNHEMLOCK (TSH)
TEXTURE SAWNWESTERN REDCEDAR (TSW)
DOUGLAS FIR,VERTICAL GRAIN(VDF)
NATURAL FINISHINGS
SIMULATED FINISHES *On white hardwood
BEECH (SB) CHERRY, DARK (SDC) CHERRY, LIGHT (SLC) MAPLE (SM) WALNUT (SW)
SOLID WOOD SELECTION
ANIGRE, PLAINSLICE (PA)
*ASH, WHITE, QUARTERED (QA)
BAMBOO, CARAMEL,NARROW CANE(NCB)
BAMBOO, CARAMEL,WIDE CANE (WCB)
BAMBOO, NATURAL,NARROW CANE(NNB)
BAMBOO, NATURAL,WIDE CANE (NWB)
DOUGLAS FIR,VERTICAL GRAIN (VD)
EUCALYPTUS,QUARTERED (QE)
MAHOGANY,PLAIN SLICE (PM)
*MAPLE, WHITE,ROTARY CUT (RWM)
*WALNUTPLAIN SLICE (PW)
RECON MAPLE (RM) RECON WALNUT(RW)
OAK, WHITE, PLAINSLICE (PWO)
*BIRCH, SELECTWHITE, PLAINSLICE (PWB)
BEECH EUROPEANSTEAMED, PLAINSLICE (PEB)
*CHERRY, PLAINSLICE (PBC)
*BIRCH, SELECTWHITE, ROTARY CUT (RWB)
HICKORY, PLAINSLICE (PBH)
*CHERRY,QUARTERED (QC)
OAK, WHITE, RIFTCUT (RWO)
TEXTURE SAWNWALNUT (TSWN)
SOLID WOODInterior ApplicationsOther species are offeredZero VOC water-based 20% sheen clear topcoatCustom stains availableClass A fire-rated coating availableVariable profile
45LB DENSITY CORE - VENEER FINISHInterior ApplicationsExtensive veneer selectionZero VOC water-based 20% sheenclear topcoatCustom stains availableClass A fire-rated core or coating availableVariable profileHigh recycled contentNo added urea-formaldehydeMaximum stability, no warping
Simulated Maple (WBAM)
Simulated Brown Cherry (WBAH)
Simulated Red Cherry (WBAI)
Simulated Red Oak (WBAJ)
Simulated Walnut (WBAL)
Additional configurations, sizes, and finishes available: Contact your local Sales Representative or call 800-233-8990.
Customer Support | certainteed.com/ceilings | 800-233-8990
This versatile line of linear planks & panelized modules offers a multitude of finish options and easy installation methods to seamlessly create a continuous, linear visual.
LINEAR PLANKS & MODULES Wood Ceilings & Walls
3205_ _ _ _ _ _ 96 x 6 x 3/4 U1, C7, C8, C9 Veneer 2.8
3210_ _ _ _ _ _ 96 x 8 x 3/4 U1, C7, C8, C9 Veneer 2.8
3205_ _ _ _ _ _ 96 x 6 x 3/4 U1, C7, C8, C9 Veneer 2.8
3210_ _ _ _ _ _ 96 x 8 x 3/4 U1, C7, C8, C9 Veneer 2.8
3105L4_ _ _ _ Twist Clip 96 x 3-3/4 x 3/4 L4 Solid Wood 1.4
3115L6_ _ _ _ Twist Clip 96 x 5-1/4 x 3/4 L6 Solid Wood 1.4
3110L4_ _ _ _ Grid or Furring Clip 96 x 3-3/4 x 3/4 L4 Solid Wood 1.4
3120L6_ _ _ _ Grid or Furring Clip 96 x 5-1/4 x 3/4 L6 Solid Wood 1.4
3405L4_ _ _ _ Twist Clip 96 x 3-3/4 x 3/4 L4 Veneer 3
3415L6_ _ _ _ Twist Clip 96 x 5-1/4 x 3/4 L6 Veneer 3
3410L4_ _ _ _ Grid or Furring Clip 96 x 3-3/4 x 3/4 L4 Veneer 3
3420L6_ _ _ _ Grid or Furring Clip 96 x 5-1/4 x 3/4 L6 Veneer 3
3025L4_ _ _ _ 96 x 12 x 3/4 L4 Solid Wood 1.6
3030L6_ _ _ _ 96 x 12 x 3/4 L6 Solid Wood 1.6
3305L4_ _ _ _ 96 x 12 x 3/4 L4 Veneer 3
3315L6_ _ _ _ 96 x 12 x 3/4 L6 Veneer 3
LINEAR PLANKS Module Dimensions (L x W x H) (in.) Pattern Finish Weight
(Lbs. / Sq. Ft.)
Closed (Tongue & Groove)
Open Reveal (Black Felt Reveal)
LINEAR MODULES Module Dimensions (L x W x H) (in.) Pattern Finish
Open Reveal (Black Felt Reveal)
Plan
ksPl
anks
Mod
ules
UNDERSTANDING ITEM NUMBERS:To specify or order a specific product, include the 4-digit Item Number followed by the 2-character Configuration Code and the 4-character Color Code.
Configuration codes: Unperforated (UI), Channels (C7), (C8), (C9), Open Reveals (L4), (L6).
Color Codes: Solid Wood Finishes: Simulated Maple (WBAM), Simulated Beech (WBAK), Simulated Brown Cherry (WBAH), Simulated Red Cherry (WBAI), Simulated Red Oak (WBAJ), Simulated Walnut (WBAL)Natural Veneers: Plain Slice Veneers: Cherry (VPC0), Medium Brown Cherry (VPCB), Medium Red Cherry (VPCR), Steamed European Beech (VEB0), Maple (VMP0), Red Oak (VPR0), Walnut Coffee (VPWC), Walnut (VPW0) Reconstituted Veneers: Reconstituted Cherry (RRC0), Reconstituted Walnut (RWN0), Reconstituted Maple (RMC0), Quartered Blonde (RQB0) Bamboo Veneers: Narrow Cane Bamboo Caramel (BNC0), Narrow Cane Bamboo Natural (BNN0)
Example: To order the open reveal plank with a L4 pattern in Maple , order 3310 L4 WMA0
Item number Color Code
Configuration Code
ACOUSTICAL INFORMATIONPattern NRC*
C7 0.75
C8 0.80
C9 0.50
L4 0.40
L6 0.40
C7 (3mm groove, 13mm Spacing)
L4 (3-1/4" planks with 3/4" felt reveal)
L6 (5-1/4" planks with 3/4" felt reveal)
C8 (3mm groove, 6mm Spacing)
C9 (3mm groove, 25mm Spacing)
PATTERN OPTIONS CONFIGURATIONS
Delta Crown Room, ceiling and wall application
ACOUSTILINE DETAILS
t e l : 8 8 8 . 3 5 7 . 2 3 4 5 f a x : 8 0 0 . 4 6 2 . 6 6 5 0 w w w . n o r t o n c e i l i n g s . c o m
l o o k i n g f o r w a r d t o l o o k i n g u p™
ORTONINDUSTRIES
INC.
Acoustiline C E I L I N G& W A L L S
Plank available in Acoustiline 1, 2, 3, 4, 5 & 6. Channeled panel size is 2' x 2'.Can achieve an NRC rating up to .95 when combined with acoustical components.
• install on ceilings or walls• tongue & groove wood plank or 2' x 2' wood panel• slotting & perforations provide acoustical performance• option of acoustical fleece or acoustical pad• constructed of 3/4" fire-rated 45lb density core• certified wood available• uses real wood veneers• custom staining available
DESIGN OPTIONS
TONGUE & GROOVE PLANK
2' X 2' CHANNELED PANEL
3mm groove 28mm spacing
acoustiline 53mm groove 16mm spacing
acoustiline 6
3mm groove 8mm spacing
acoustiline 13mm groove 13mm spacing
acoustiline 2
3mm groove 32mm spacing
acoustiline 33mm groove 25mm spacing
acoustiline 4
acoustiline 1 acoustiline 2 acoustiline 33mm groove 8mm spacing
acoustiline 4
acoustiline 5 acoustiline 6
3mm groove 13mm spacing
3mm groove 32mm spacing
3mm groove 25mm spacing
3mm groove 28mm spacing
3mm groove 16mm spacing
8mm
3mm
13mm
3mm32mm3mm
25mm
3mm
28mm
3mm
16mm
3mm
8mm3mm 13mm3mm
32mm3mm 25mm3mm
28mm3mm 16mm3mm
Norton Grid Clip
acoustiline 7 acoustiline 82mm groove 10mm spacing
2mm groove 5mm spacing
10mm
2mm
5mm
2mm
shadow mounting
Long linear 6" x 96" or 8" x 96" nominal planks that interlock using tongue and groove design. Mounts with Norton Grid Clip and uses 15/16" HD t-bar. Grid clip snaps to grid, locking every 24".
Mounts with 15/16" HD t-bar suspension.
tegular mounting
flush mounting
N
Delta Crown Room, ceiling and wall application
ACOUSTILINE DETAILS
t e l : 8 8 8 . 3 5 7 . 2 3 4 5 f a x : 8 0 0 . 4 6 2 . 6 6 5 0 w w w . n o r t o n c e i l i n g s . c o m
l o o k i n g f o r w a r d t o l o o k i n g u p™
ORTONINDUSTRIES
INC.
Acoustiline C E I L I N G& W A L L S
Plank available in Acoustiline 1, 2, 3, 4, 5 & 6. Channeled panel size is 2' x 2'.Can achieve an NRC rating up to .95 when combined with acoustical components.
• install on ceilings or walls• tongue & groove wood plank or 2' x 2' wood panel• slotting & perforations provide acoustical performance• option of acoustical fleece or acoustical pad• constructed of 3/4" fire-rated 45lb density core• certified wood available• uses real wood veneers• custom staining available
DESIGN OPTIONS
TONGUE & GROOVE PLANK
2' X 2' CHANNELED PANEL
3mm groove 28mm spacing
acoustiline 53mm groove 16mm spacing
acoustiline 6
3mm groove 8mm spacing
acoustiline 13mm groove 13mm spacing
acoustiline 2
3mm groove 32mm spacing
acoustiline 33mm groove 25mm spacing
acoustiline 4
acoustiline 1 acoustiline 2 acoustiline 33mm groove 8mm spacing
acoustiline 4
acoustiline 5 acoustiline 6
3mm groove 13mm spacing
3mm groove 32mm spacing
3mm groove 25mm spacing
3mm groove 28mm spacing
3mm groove 16mm spacing
8mm
3mm
13mm
3mm32mm3mm
25mm
3mm
28mm
3mm
16mm
3mm
8mm3mm 13mm3mm
32mm3mm 25mm3mm
28mm3mm 16mm3mm
Norton Grid Clip
acoustiline 7 acoustiline 82mm groove 10mm spacing
2mm groove 5mm spacing
10mm
2mm
5mm
2mm
shadow mounting
Long linear 6" x 96" or 8" x 96" nominal planks that interlock using tongue and groove design. Mounts with Norton Grid Clip and uses 15/16" HD t-bar. Grid clip snaps to grid, locking every 24".
Mounts with 15/16" HD t-bar suspension.
tegular mounting
flush mounting
N
Delta Crown Room, ceiling and wall application
ACOUSTILINE DETAILS
t e l : 8 8 8 . 3 5 7 . 2 3 4 5 f a x : 8 0 0 . 4 6 2 . 6 6 5 0 w w w . n o r t o n c e i l i n g s . c o m
l o o k i n g f o r w a r d t o l o o k i n g u p™
ORTONINDUSTRIES
INC.
Acoustiline C E I L I N G& W A L L S
Plank available in Acoustiline 1, 2, 3, 4, 5 & 6. Channeled panel size is 2' x 2'.Can achieve an NRC rating up to .95 when combined with acoustical components.
• install on ceilings or walls• tongue & groove wood plank or 2' x 2' wood panel• slotting & perforations provide acoustical performance• option of acoustical fleece or acoustical pad• constructed of 3/4" fire-rated 45lb density core• certified wood available• uses real wood veneers• custom staining available
DESIGN OPTIONS
TONGUE & GROOVE PLANK
2' X 2' CHANNELED PANEL
3mm groove 28mm spacing
acoustiline 53mm groove 16mm spacing
acoustiline 6
3mm groove 8mm spacing
acoustiline 13mm groove 13mm spacing
acoustiline 2
3mm groove 32mm spacing
acoustiline 33mm groove 25mm spacing
acoustiline 4
acoustiline 1 acoustiline 2 acoustiline 33mm groove 8mm spacing
acoustiline 4
acoustiline 5 acoustiline 6
3mm groove 13mm spacing
3mm groove 32mm spacing
3mm groove 25mm spacing
3mm groove 28mm spacing
3mm groove 16mm spacing
8mm
3mm
13mm
3mm32mm3mm
25mm
3mm
28mm
3mm
16mm
3mm
8mm3mm 13mm3mm
32mm3mm 25mm3mm
28mm3mm 16mm3mm
Norton Grid Clip
acoustiline 7 acoustiline 82mm groove 10mm spacing
2mm groove 5mm spacing
10mm
2mm
5mm
2mm
shadow mounting
Long linear 6" x 96" or 8" x 96" nominal planks that interlock using tongue and groove design. Mounts with Norton Grid Clip and uses 15/16" HD t-bar. Grid clip snaps to grid, locking every 24".
Mounts with 15/16" HD t-bar suspension.
tegular mounting
flush mounting
N
ChannelsSUSPENSION SYSTEM OPTIONS
15/16"
13/32"
1/4"
1 1/2"
15/16˝
1/4˝
1 - 1/2˝
13/32˝
CAN’T FIND A SIZE? Additional configurations, sizes, and finishes available. Contact your local Sales Representative or call 800-233-8990.
*with Theatre Black f acoustic infill
Customer Support | certainteed.com/ceilings | 800-233-8990
PHYSICAL DATAMATERIALFire-retardant Particle Board, fire-retardant MDF, or solid basswood; plywood backer (linear modules only)
SURFACE FINISHClear or tinted topcoat with 20% sheen; flat black plywood backers and acoustical felt
FIRE CLASS (ASTM E1264)Solid Basswood Planks and Modules:Class C per ASTM E84Flame Spread 200 or lessSmoke Developed 450 or less
Veneered Linear Planks and Modules:Class A per ASTM E84Flame Spread: 25 or lessSmoke Developed: 50 or less
SITE CONDITIONSWood panels must be acclimatized for 72 hours prior to installation. Maintain relative humidity between 86% and temperature between 50°F and 89°F for the life of the product.
Wood is a natural material with varying grain and color characteristics. Characteristics may vary from panel to panel.
SEISMIC RESTRAINTSee installation instructions for seismic area installation information.
WARRANTYFull warranty information available at CertainTeed.com.
LEED® is a registered trademark of the U.S. Green Building Council. CTC-08-605 © 9/19 CertainTeed
LINEAR PLANKS & MODULES Wood Ceilings & Walls
ACCESSORIES
INSTALLATION ACCESSORIES Product Name Color Installation Use
C-111 2-Piece Locking Grid Clip Metal 1 per 2’ Grid Clip PlankFor Grid Clip and Tongue and Groove linear planks; connects to 15/16 suspension system; 4 clips included per 96" Grid Clip or Tongue and Groove plank
C-110 Furring Clip Metal 1 per 2’ Grid Clip PlankFastens to structure, ceiling or wall; 4 Furring Clips included with 2-Piece Locking Grid Clip (C-110) of Grid Clip or Tongue & Groove planks
C-112 Linear Plank Twist Clip Metal 1 per 2’ Grid Clip PlankFor Twist Clip linear planks; 4 Twist Clips included with Twist Clip 96" linear planks
C-101 Splice Clip For Linear Alignment Metal 1 per Linear PlankFor splicing together linear plank ends; 1 Splice Clip included per 96" linear plank
TRIM & TRIM ACCESSORIES Product Name Color Installation Use
1005T2 _ _ _ _ 96" x 2" x 3/4" Solid Wood Or Veneered
All Finishes As Desired2" perimeter trim; each 96" trim piece includes 1 3" Alignment Splice Plate (C-101) and 4 Panel Edge Fixing Brackets (C-113) for trim installation
1015T4 _ _ _ _ 96" x 4" x 3/4" Solid Wood Or Veneered
All Finishes As Desired4" perimeter trim; each 96" trim piece includes 1 3" Alignment Splice Plate (C-101) and 4 90 Degree Perimeter Trim Brackets (C-116) for trim installation
1025T6 _ _ _ _ 96" x 6" x 3/4" Solid Wood Or Veneered
All Finishes As Desired6" perimeter trim; each 96" trim piece includes 1 3" Alignment Splice Plate (C-101) and 4 90 Degree Perimeter Trim Brackets (C-116) for trim installation
C-116 90 degree Perimeter Trim Bracket
Metal 1 Per Foot Of Trim For attaching trim to modules; 1 clip per linear foot of trim
C-100 90 Degree Trim Clip Metal 2 Per Foot Of TrimFor securing 90 degree perimeter trim corners; 1 clip required for each corner; ordered separately by piece
C-101 Trim/Alignment Splice Plates
Metal As NeededFor splicing together lengths of trim; install as needed; 1 splice plate needed for each trim connection
FMB-12 Field Modifi cation Backers Flat BlackFor Attaching 90 Degree
Perimeter Trim Bracket (C-116)For installation of perimeter trim