ModelSim-Intel FPGA Installation and Integration with Vivado Guide

1- Register for Intel® FPGA Program

https://www.intel.com/content/www/us/en/forms/fpga/fpga-individual-registration.html 2- Download the ModelSim-Intel FPGA Starter Edition

https://www.intel.com/content/www/us/en/software/programmable/quartus-prime/model-sim.html

3- Run the setup.exe and start the installation process

4- Integrate the ModelSim simulator with Vivado 2019.1

A. Run Vivado. B. Create a new project. C. Add all sources to the project and change the target language to

VHDL 2008 (only if needed).

D. Compile Xilinx simulation libraries for Modelsim

E. Change target simulator to ModelSim. Open project settings and select the options of the tool shown below:

F. Set ModelSim install path in 3rd Party Simulators.

5- Run Simulation