Post on 24-May-2018
transcript
STRENGTHPROPRIETARY SHELL MATERIAL PROVIDES SUPERIOR HEAT PROTECTIONWITH39% MORE RESISTANCE TO IMPACT PENETRATION THAN CONVENTIONALFIBERGLASS MATERIAL.
DURABILITYPRECISION-ENGINEEREDWITH RUGGED COMPONENTS THATSTAND UP TO THE TEST OF TIME.
COMFORTEASY TO ADJUST PADDED HEADBAND AND SUSPENSION COMPONENTSENSURE A CUSTOMIZED FIT AND LOW RIDE.
INNOVATIONUNIQUE DESIGN AND MATERIALS PROVIDE SUPERIOR PROTECTION ANDFUNCTIONALITY.
+
+
+
+
Features and BenefitsOur Helmets
BEN 2 LRNEW LOW RIDERTRADITIONAL
LITE FORCE LRNEW LOW RIDERMODERN
BEN 2 LRNEW LOW RIDERTRADITIONAL
LITE FORCE LRNEW LOW RIDERMODERN
HEAVYDUTY
Protected Suspension StrapsInternally located and not
affected by external heat or flame
Large Hang-up LoopLarge enough to easily fitover a peg
Durable Eagle Front HolderMoves forward and backward to fit any
brand/style of front
Reversible 2-point Quick-attach ChinstrapsQuickly and easily changed or switched to right- or left-hand cinch
Bulldog Edge BeadingRugged and durable
Certified EZ-FlipsNFPA 1971, 2007 Edition
and ANSI Z87.1standards
STRUCTURAL
PROXIMITY
TECHNICAL RESCUE &RECOVERY/UTILITY
WILDLAND EMS
LIGHTWEIGHT
LIGHTWEIGHT LIGHTWEIGHT
Ben and Lite ForceLR Low Rider ModelsDeliver a lower center of gravity, and our 6-position
suspension provides a full inch and a half of adjustment for
a quick and easy custom fit.
NEW
Superior Suspension SystemMorning Pride provides a one-piece
headband and ratchet assembly that can
be adjusted without disassembly. It
accommodates the widest range of hat
sizes of any NFPA helmet on the market—
from under size 6 to over size 9. Our new
6-position suspension provides a full inch
and a half of adjustment for a quick and
easy custom fit.
Bulldog Edge BeadingOur unique Bulldog™ edge beading looks
great and provides rugged, durable
protection to the helmet brim.
Built-in Goggle Retention SystemEvery helmet is goggle-ready and
equipped with our unique integrated
goggle strap attachment system. No extra
retaining parts are required.
FYR-GlassStrongest Shell on the Market
FYR-Glass is a proprietary custom-blended
material found only in Morning Pride
helmets. Our testing shows that FYR-Glass
helmets are 39% more resistant to impact
penetration than conventional fiberglass
helmets with or without impact caps.
FYR-Glass allows design options not
available with other materials, resulting in a
helmet that is lighter and better fitting.
Best Heat PerformanceWhen exposed to radiant heat of two watts
per square centimeter (2 W/cm2 is the
NFPA-mandated test exposure),
FYR-Glass outperforms other materials.
FYR-Glass shows no blistering or finish
damage.
Low Riding, Great Fitting, Low Centerof GravityOur unique padded suspension system
and wider interior provide superior comfort
and fit. The FYR-Glass shell is inherently
stronger, eliminating the need for impact
caps. The new Low Rider models
deliver an even lower center of gravity,
resulting in significantly less neck strain.
FYR-Glass ShellsStrongest shell on the market – proprietarytechnology
Comfortable and Easy toReplace SuspensionCradles your head in comfort
Securely Attached Ear CoversEasily removed for cleaning
Goggle Garage OptionProtects goggles from debrisand radiant heat
Built-in EZ Attach Goggle SystemOffers easy attachment for full or2-strap eyelet goggles
High Heat Performance ShellsProprietary technology – standard
Available in:Ben 2 LR – Structural and Proximity
Lite Force LR – Structural and Proximity
Heavy Duty Technical Rescue & Recovery
All shells are made from our specially
engineered Thermo-FYR high-temperature
thermo-plastic. This material resists high
heat and impact penetration, providing
protection in demanding situations:
technical rescue/recovery, utility incidents,
and wildland fire fighting.
Standard: adjustable fit – 6-point suspen-sions, 2-way front and rear headband
depth adjustment, and separate rear width
adjustment provide proper fit.
Standard: headlamp retention clips –Specially designed clips hold headlamps
securely to our Wildland and Technical
Rescue & Recovery/Utility helmets.
Standard: stay-on goggle clips –Uniquely designed internal retaining clips
keep goggles securely on helmets and in
line for optimal goggle seal.
Thermo-FYRShells
Poly-MedShells
Optional: hearing protection – Muffs can
be used by themselves or in conjunction
with visor brackets on all front-brim and
full-brim models. Installation is easy; no
tools are required.
Optional: face and neck protectors forevery purpose – Choice of yellow Nomex®
FR cotton or yellow Nomex® FR cotton
NFPA 1977 face and neck shroud.
Optional: choice of goggles – Selectfrom Paulson or ESS brand goggles with
Pbi® Nomex® elastic straps. Choose the
Wildland (NFPA 1977) model, or the
higher-performing Structural (NFPA 1971)
model that can be used on all your fire
helmets.
Optional: leather headband ratchetassembly covers
EMS helmet shells are made of specially
engineered Poly-Med high-density plastic
to meet ANSI Z891-2003, Type 1, Class E
standards.
Adjustable four-point suspension –
EMS helmet uses automatically threaded
and electronically welded overhead straps
in a 4-point suspension that provides out-
standing performance at an economical
price. Our headband ratchet assembly
provides 4-way depth adjustment front and
rear to ensure proper fit and comfort.
Thermo-FYR Helmets Available in:Technical Rescue & Recovery/Utility Lightweight Front and Full Brim
Wildland Lightweight Front and Full Brim
Poly-Med Helmets Available in:Emergency Medical Services (EMS)
Lightweight
Standard Configurations
FYR-Glass B, W, R BPR = Yellow Nomex® Clear APEC Reflexite®
Y, U, Nomex® Moisture Quick- Hi-Temp 8-TrapezoidsO, G Barrier FR Cotton release 4˝ x .150˝ Lime
HDO = Yellow PostmanNomex® FR Cotton Slide
FYR-Glass B, W, R BPR = Yellow Nomex® Clear APEC Reflexite®
Y, U, Nomex® Moisture Quick- Hi-Temp 5 – 1˝ x 4˝O, G Barrier FR Cotton release 4˝ x .110˝ Lime
HDO = Yellow PostmanNomex® FR Cotton Slide
FYR-Glass *B, W, R Aluminized Pbi® Nomex® Gold Coat N/AY, U, W.L. Gore Moisture Quick-release 6˝ x .130˝O, G Barrier, Thermal Postman
Liner Slide
FYR-Glass *B, W, R Aluminized Pbi® Nomex® Gold Coat N/AY, U, W.L. Gore Moisture Quick-release 6˝ x .130˝O, G Barrier, Thermal Postman
Liner Slide
FYR-Glass B, W, R Optional Nomex® Optional Reflexite®
Y, U, Quick- 4 – 1˝ x 4˝O, G release Lime
PostmanSlide
Thermo- W, R, Optional Nomex® Optional Reflexite®
FYR Y, U, Quick- 4 – 1˝ x 4˝O release Lime
Thermo- B, W, R, Optional Nomex® Optional Reflexite®
FYR Y, U, Quick- 4 – 1˝ x 4˝O release Lime
Thermo- W, R, Y, Optional Nomex® Optional Reflexite®
FYR U, O Quick- 4 – 1˝ x 4˝release Lime
Thermo- B, W, R, Y, Optional Nomex® Optional Reflexite®
FYR U, O Quick- 4 – 1˝ x 4˝release Lime
Poly-Med W, R, Y, Optional Optional Optional OptionalU, O
New Ben 2 Low Rider TraditionalHT-BFL-BPR – HT-BFL-HDO
Ben 2 Plus TraditionalHT-BF2-BPR – HT-BF2-HDO
New Lite Force Low Rider ModernHT-LFL-BPR – HT-LFL-HDO
Lite Force Plus ModernHT-LF2-BPR – HT-LF2-HDO
Proximity TraditionalNew Low Rider HT-BFL-PROXPlus HT-BF2-PROX
Proximity ModernNew Low Rider HT-LFL-PROXPlus HT-LF2-PROX
Technical Rescue & Recovery/Utility Heavy DutyNEW LR Low RiderHT-UHD
Technical Rescue & Recovery/Utility LightweightFront Brim – HT-US
Technical Rescue & Recovery/Utility LightweightFull Brim – HT-UF
Wildland Front BrimHT-WS
Wildland Full BrimHT-WF
EMSHT-ES
*When no shell color is specified, we assume color matching is not an issueand will ship the shell color(s) of our choice. Available shell colors: B/Black,W/White, R/Red, Y/Yellow, U/Blue, O/Orange, G/Green.
Helmet Description Shell Shell Eye/FaceModel Number Material Colors Ear Covers Chinstraps Protection Trim
Structural Traditional HelmetNFPA 1971 Certified
BEN 2 LR – LOW RIDER
Standard Ben 2 LRHT-BFL-BPRwith yellow Nomex®moisture barrier FRcotton ear cover
Standard Ben 2 LRHT-BFL-HDOwith yellow Nomex®2-layer FR cotton earcover
Models HT-BF2-BPRand HT-BF2 HDOalso available
How to Build Your HelmetStep 1: Specify base model:
Base model includes FYR-Glass
shell, 2-piece padded brow
comfort cap and ratchet,
6-point suspension with 6 depth
adjustments, aramid liner cap,
postman slide chinstrap, APEC
4˝ x .150˝ faceshield, 8 lime
Reflexite® trapezoids, gold plated
eagle leather front holder and
hang-up loop
Step 2: Select required components:
• Choose optional chinstraps
• Choose optional ear covers
• Choose optional eye/face
protection
• Choose optional retroreflective
trim pattern/packages
• Choose optional eagle front
holder
Step 3: Select options:
• Choose accessories
• Choose front
• Choose auxiliary helmet
products
• Choose shell color: B – Black,
W – White, R – Red, Y – Yellow,
O – Orange, U – Blue, G – Green
Visit www.HoneywellFirstResponder.com for helmetand front specifying worksheets
Required Components
Optional Nomex®Milwaukee chinstrap
Standard Nomex®postman slide andquick-releasechinstrap
Optional Maskmate™1.5˝ hook and loopquick closureNomex® or Pbi®
Optional Nomex®4-point with quick-release chinstrap
Standard HDOyellow Nomex®2-layer FR cotton
Optional Black Pbi®2-layer FR cotton(FDNY spec optionalmaterial choice)
Other outer shellcolors availableStandard BPR
yellow Nomex®moisture barrier FRcotton
Optional Canadian-style ear cover
Standard APECfaceshield 4˝ x .150˝
Optional DURA-Shield4˝ x .150˝
Optional EZ-Flipscertified to bothNFPA 1971 andANSI Z87.1
Optional Paulson orESS NFPA 1971goggles
Standard8 – trapezoidsReflexite® lime
Optional8 – trapezoids3M™ Scotchlite™2-tone lime or orange
Optional8 – trapezoids3M™ Scotchlite™lime or orange
NEW
Low Rider optionalleather headbandand ratchet cover
Required Components
Optional Front Accessories
Optional Fronts
Optional Accessories
Optional StampedBrass TraditionalEagle Front Holder
Standard Golden AlloyPlating TraditionalEagle Front Holder
Optional gogglegarage
Plus optionalone-piece leatherbrow comfort capand ratchet cover
Plus optionalone-piece browcomfort cap
Optional metalcircular rank insignias
Optional anti-snagfront stabilizationbracket
Optional FDNYAssigned Officer
Optional LA County
Optional Houston
Optional RecognitionAward
Optional gold leaf
Optional Basic
Optional Fort Worth Optional Sacramento
Optional FDNYFirefighter
Optional FDNYCovering Officer
Optional Acting BattChief (recessed orraised)
Optional HoustonPassport System
Optional LA CountyPassport System
Optional MulticolorIntegral
Optional ArchedAssigned Officer
Optional Field CommUnit (recessed orraised)
Optional Columbusor Chicago
Optional TruckLettered
Custom FrontsWe can design aleather front to meetyour specific needs.
Optional Memphis
Structural Modern HelmetNFPA 1971 Certified
LITE FORCE LR – LOW RIDER Required Components
Optional Nomex®Milwaukee chinstrap
Standard Nomex®postman slide andquick-releasechinstrap
Standard Lite ForceLR HT-LFL-BPRwith Yellow Nomex®moisture barrier FRcotton ear cover
Standard Lite ForceLR HT-LFL-HDOwith Yellow Nomex®2-layer FR cotton earcover
Models HT-LF2-BPRand HT-LF2 HDOalso available
How to Build Your HelmetStep 1: Specify base model:
Base model includes FYR-Glass
shell, 2-piece padded brow
comfort cap and ratchet,
6-point suspension with 6 depth
adjustments, aramid liner cap,
postman slide chinstrap, APEC
4˝ x .110˝ faceshield, 5 lime
Reflexite® bars and hang-up loop
Step 2: Select required components:
• Choose optional chinstraps
• Choose optional ear covers
• Choose optional eye/face
protection
• Choose optional retroreflective
trim pattern/packages
Step 3: Select options:
• Choose accessories
• Choose front
• Choose auxiliary helmet
products
• Choose shell color: B – Black,
W – White, R – Red, Y – Yellow,
O – Orange, U – Blue, G – Green
Visit www.HoneywellFirstResponder.com for helmetand front specifying worksheets
Optional Maskmate™1.5˝ hook and loopquick closureNomex® or Pbi®
Optional Nomex®4-point with quick-release chinstrap
Standard HDOyellow Nomex®2-layer FR cotton
Optional Black Pbi®2-layer FR cotton(FDNY spec optionalmaterial choice)
Other outer shellcolors availableStandard BPR
yellow Nomex®moisture barrier FRcotton
Optional Canadian-style ear cover
Standard APEC4˝ x .110˝ faceshieldOptional 4˝ x .150˝ or6˝ x .130˝
Optional DURA-Shield4” x .150”
Optional Paulson orESS NFPA 1971goggles
Optional EZ-Flipscertified to bothNFPA 1971 andANSI Z87.1
Standard5 – 1˝ x 4˝ barsReflexite® lime or3M™ Scotchlite™ lime
Optional10 – trapezoidsReflexite® lime or3M™ Scotchlite™solid lime or orange,2-tone lime ororange
Optional 3 sets ofparallelogramsReflexite® lime or3M™ Scotchlite™lime or orange,2-tone lime or orange
NEW
Proximity HelmetsNFPA 1971 Certified
TRADITIONAL MODERN Required ComponentsOptional Accessories
Optional Accessories
Optional Fronts
Optional leatherpassport accounta-bility individual fronts
Optional Reflexite® and 3M™ Scotchlite™retroreflective fronts
Optional multi-colorintegral front
Optional Nomex®Milwaukee chinstrap
Standard Nomex®postman slide andquick-release chinstrap
Optional faceshieldcover
Both models inherently provide resistance
to bloodborne pathogens
How to Build Your HelmetStep 1: Specify base model:
Base model includes FYR-Glass
shell, 2-piece padded brow
comfort cap and ratchet,
6-point suspension with 6 depth
adjustments, postman slide
chinstrap, 6˝ x .130˝ gold coat
faceshield, hang-up loop and
aluminized helmet cover and
shroud
Step 2: Select required components:
• Choose optional chinstrap
• Choose optional shroud
• Choose optional headband
ratchet cover
Optional J-Fireshroud
Standard shroud
Standard Ben 2LR Low RiderHT-BFL-PROX
Standard Lite ForceLR Low RiderHT-LFL-PROX
Low Rider optionalleather headbandand ratchet cover
Optional gogglegarage
Plus optionalone-piece leatherbrow comfort capand ratchet cover
Plus optionalone-piece browcomfort cap
Low Rider optionalleather headbandand ratchet cover
Plus optionalone-piece leatherbrow comfort capand ratchet cover
Plus optionalone-piece browcomfort cap
Models HT-BF2-PROX and HT-LF2 PROXalso available
NEW NEW
Technical Rescue,Wildland and EMS HelmetsNFPA 1951, NFPA 1977 and ANSI Certified
TECHNICAL RESCUE
Standard LightweightFull Brim HT-UF
Standard LightweightFront Brim HT-US
Standard LightweightFront Brim HT-WS
EMS
Standard LightweightFull Brim HT-WF
WILDLAND
How to Build Your HelmetStep 1: Specify base model:
• Technical Rescue & Recovery/
Utility full or front brim
base model includes
Thermo-FYR shell, 6-point
padded headband ratchet
suspension, quick-release
chinstrap, goggle clips,
3 headlamp retention clips
and 4 lime Reflexite® bars
• Wildland full or front brim
base model includes
Thermo-FYR shell, 6-point
padded headband ratchet
suspension, quick-release
chinstrap, goggle clips,
3 headlamp retention clips
and 4 lime Reflexite® bars
• EMS base model includes
Poly-Med shell, 4-point
headband ratchet suspension
Step 2: Select required components:
• Choose optional chinstrap
Step 3: Select options:
• Choose EMS chinstrap
• Choose ear/hearing protection
• Choose ear cover or shroud
• Choose eye/face protection
• Choose standard or leather
headband ratchet cover
• Choose EMS retroreflective
trim pattern
• Choose winter liner
• Choose fronts
• Choose auxiliary products
• Choose shell color: W – White,
R – Red, Y – Yellow,
O – Orange, U – Blue,
B – Black (full brim only)
StandardLightweight HT-ES
ANSI Z89.1-2003Type 1, Class Ecertified
Required Components
Optional Accessories
Standard Nomex®with quick-releasechinstrap forTechnical Rescueand Wildland
Optional Nomex®4-point with quick-release chinstrap forTechnical Rescueand Wildland
Optional front andfull brim muffsear/hearingprotection
Optional EMS onlypolypropylene2/4-point with quick-release chinstrap
Optional yellowNomex® FR cottonear cover. Otherouter shell colorsavailable.
Optional EMS only –Nylon/Crosstech®EMS
Optional face/neckshroud yellowNomex® FR cotton
Standard Heavy Duty Modern HT-UHDSee Lite Force LR for all optional components
Auxiliary HelmetProducts
Metal circular rankinsignias
Retroreflectivecircular rank insignias
3M™ Scotchlite™truck-style lettersand numbers
3M™ Scotchlite™truck-styleretroreflective flags
Reflexite®retroreflective flag
3M™ Scotchlite™truck-style archedand straight title tapes
3M™ Scotchlite™garment-style archedtitle tapes
Optional Accessories
3M™ Scotchlite™truck-style flag
Optional Fronts
Optional 7˝ meshscreen visor for front-and full-brim helmets
Optional 6˝ x .060˝poly/carb visor forfront- and full-brimhelmets
Optional visor bracketfor front brim
Optional visor bracketfor full brim
Optional ESS goggles Optional ESS gogglesw/padding
Optional ESS 2-strapquick-attach gogglesw/padding
Optional Paulsongoggles
Optional winter linerinsert
Optional retroreflectivetrim 4 – 1˝ x 4˝ bars
Optional leatherpassport accounta-bility individual fronts
Optional multicolorintegral front
Optional Reflexite® and 3M™ Scotchlite™retroreflective fronts
Visor bracket required Visor bracket required
Honeywell Life SafetyHoneywell First Responder Products
Honeywell
#1 Innovation Court
Dayton, Ohio 45414
Tell: 800-688-6148
www.HoneywellFirstResponder.com
Honeywell is proud to be the exclusive
corporate sponsor of the United States
Fire Administration/National Fallen
Firefighter Foundation’s National Fire
Service Vulnerability Assessment
Project
Honeywell First Responder
Products is a proud sponsor of the
2011 World Police & Fire Games
June 2011© 2011 Honeywell International Inc.
ProudlySupporting
NFPANational FireProtectionAssociation
FDSOAFire DepartmentSafety OfficersAssociation
The IAFFFire FightersBurnFoundation
NFFFNational FallenFirefightersFoundation
ISFSIInternationalSociety ofFire ServiceInstructors
NVFCNationalVolunteerFire Council
FirefighterCancerSupportNetwork
InternationalAssociationof BlackProfessionalFire Fighters
InternationalAssociation ofWomen in Fire& EmergencyServices
FEMSAFire EquipmentManufacturers& SuppliersAssociation
IAFCInternationalAssociation ofFire Chiefs
CongressionalFire ServicesInstitute
Exclusive CorporateSponsor