Post on 13-Feb-2020
transcript
ASSA ABLOY, the global leader in door opening solutions
MULTI POINT LOCK TRIMPRICE BOOKOctober 2018
BX4-3PTPRICEBK2019OCTOBER 2018
EMTEK Products, Inc.15250 E. Stafford Street
City of Industry • CA 91744Tel: 800-356-2741 • 626-961-0413Fax: 800-577-5771 • 626-336-2812
emtek.com
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience
2019_Emtek_Multi_Point_Price_Book_Cover_ps_072718.indd 1-2 7/27/18 10:04 AM
Large Multi Point Entry SetsAmerican Cylinder Hub Above/Below Handle, 35⁄8” Center-to-Center
ref. G-U®
Large Multi Point Entry SetsEuro Cylinder Hub Below Handle, 35⁄8” Center-to-Center
ref. G-U®
PAGE
14
18
TABL
E OF C
ONTE
NTS
(92mm)3-5/8”
4-1/2"
4-1/2"
3-5/8”
4-1/2"
4-1/2"
(92mm)
Large Multi Point Entry Sets
3-5/8”
4-1/2"
4-1/2"
(92mm)
Subject to the terms and conditions of this warranty, Emtek Products, Inc. (“Company”) extends a lifetime limited warranty* to the
original consumer user (“Original User”) of our product (“Product”) against defects in material and workmanship, as long as the Original User
occupies the residential premises upon which the Product was originally installed.
*Electronic components warranted TWO (2) YEARS
This warranty only applies to the Original User of the Products. This warranty is not transferable. This warranty applies to all products sold on
or after April 2, 2012.
Original User: The Original User will return the defective Product to the retailer from whom it was purchased, accompanied by a statement
of defects and proof of purchase.
What Emtek will do: Upon return of the defective Product to Emtek for inspection, free and clear of all liens and encumbrances and
accompanied by the statement of defects and proof of purchase, Emtek’s sole obligation, at its option, is to either repair or replace the Product,
or refund the original retailer purchase price in exchange for the Product.
THE COMPANY MAKES NO OTHER WARRANTY OTHER THAN AS EXPRESSLY STATED HEREIN, AND ALL IMPLIED WARRANTIES,
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED.
THE COMPANY’S MAXIMUM LIABILITY HEREUNDER IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. IN NO EVENT SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL OR SPECIAL AND/OR PUNITIVE DAMAGES OF ANY NATURE
ARISING FROM THE SALE OR USE OF THE PRODUCT, WHETHER BASED ON CONTRACT, WARRANTY, TORT, STRICT LIABILITY, PATENT
INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some local laws do not allow the exclusion
or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific
legal rights and a buyer may also have other rights which may vary from state to state.
WHAT IS NOT COVERED: THE FOLLOWING COSTS, EXPENSES AND DAMAGES ARE NOT COVERED BY THE PROVISIONS OF THIS LIMITED
WARRANTY: (I) LABOR COSTS INCLUDING, BUT NOT LIMITED TO, SUCH COSTS AS THE REMOVAL AND RE-INSTALLATION OF PRODUCT; AND (II)
SHIPPING AND FREIGHT EXPENSES REQUIRED TO RETURN PRODUCT TO EMTEK.
THE PROVISIONS OF THIS WARRANTY DO NOT APPLY TO PRODUCTS: (I) USED IN COMMERCIAL APPLICATIONS; (II) USED IN COMMON AREA
APPLICATIONS; (III) USED FOR PURPOSES FOR WHICH THEY ARE NOT DESIGNED OR INTENDED; (IV) WHICH HAVE BEEN SUBJECTED TO
ALTERATION, ABUSE, MISUSE, NEGLIGENCE OR ACCIDENT; (V) WHICH HAVE BEEN IMPROPERLY STORED, INSTALLED, MAINTAINED OR OPERATED;
(VI) WHICH HAVE BEEN USED IN VIOLATION OF WRITTEN INSTRUCTIONS PROVIDED BY EMTEK; (VII) WHICH HAVE BEEN SUBJECTED TO
IMPROPER TEMPERATURE, HUMIDITY OR OTHER ENVIRONMENTAL CONDITIONS; OR (VIII) WHICH, BASED ON EMTEK’S EXAMINATION, DO NOT
DISCLOSE TO EMTEK’S SATISFACTION NON-CONFORMANCE TO THE WARRANTY. Additionally, this warranty DOES NOT COVER scratches,
abrasions, or deterioration due to the use of paints, solvents or other chemicals.
Finish Warranty: Polished Brass-Lifetime and Polished Nickel-Lifetime finishes carry a lifetime limited finish warranty. There is no finish
warranty on Deep Burgundy, Flat Black Patina, Medium Bronze Patina, Polished White Bronze, Rust, Silver Patina, Tumbled White Bronze, and
Unlacquered Brass finishes. All other finishes carry a five year finish warranty.
Warranty claims: Please contact the retailer from whom the defective product was purchased. If assistance is needed, please contact Emtek
Customer Service at:
EMTEK Products, Inc.
15250 E. Stafford Street
City of Industry, CA 91744
Tel: (626) 961-0413
LIFETIME LIMITED WARRANTY
152854_JamesLItho_Cover.indd 2 7/26/18 2:04 PM
PAGE
EMTEK MULTI POINT LOCK TRIM FOR SWINGING DOORSCHOOSE TRIMSETS FROM DOOR & LOCK CONFIGURATIONS, AVAILABLE IN BOTH KEYED AND NON-KEYED FUNCTIONS
Door Configuration #1American Cylinder Hub Below Handle, 35⁄8” Center-to-Center
ref. Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior®
22
Door Configuration #2American Cylinder Hub Above Handle, 35⁄8” Center-to-Center
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®
28
Door Configuration #3American Cylinder Hub Above Handle, 41⁄8” Center-to-Center
ref. Andersen®
34
To determine your Multi-Point Lock configuration:
1) Identify the manufacturer of your door and multi-point lock 2) Measure the center-to-center hole spacing between the lever and the cylinder 3) Check the lever position: is it above or below the cylinder? 4) Identify the type of cylinder used in the door: is it American or Euro Profile Cylinder?
> >
TABLE OF CONTENTS
Multi Point Lock Trim Price BookEffective October 1, 2018
Door Manufacturers listed under each configuration are for reference only and are subject to change. Some retrofitting may be necessary. Please carefully measure and identify your hardware using the diagrams and steps listed below.
2019_Emtek_MP_Price_Book.indb 3 7/25/18 7:18 PM
TABL
E OF C
ONTE
NTS
Product IndexOrder FormLifetime Limited Warranty
Door Configuration #6American Cylinder Hub Below Handle, 35⁄8” Center-to-Center
ref. Milgard®, Pella®
52
Door Configuration #7American Cylinder Hub Above Handle, 6” Center-to-Center
ref. Trillenium® (formerly W&F Manufacturing)
58
68
7071
Door Configuration #8American Cylinder Hub Above Handle, 51/4” Center-to-Center
ref. Neuma Doors®
63
8 7/8"
5 1/4"
1 5/8"
PAGE
Door Configuration #5Euro Profile Cylinder Below Handle, 35⁄8” Center-to-Center
ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®, Semco®, Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®
46
Door Configuration #4American Cylinder Hub Above Handle, 35⁄8” Center-to-Center
ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection (formerly Pozzi®), Marvin®, PGT®, Premium Collection (formerly Norco®), Weathershield®
40
4
2019_Emtek_MP_Price_Book.indb 4 7/25/18 7:18 PM
FINISH OPTIONS
Brushed Stainless Steel (SS)
Unlacquered Brass (US3NL)
Tumbled White Bronze (TWB)
Flat Black Bronze Patina (FB)
Medium BronzePatina (MB)
Oil Rubbed Bronze (US10B)
Satin Nickel (US15)
Pewter (US15A)
Flat Black(US19)
Polished Chrome(US26)
Polished Brass - Lifetime (US3)
French Antique(US7)
Satin Brass (US4)
Bronze Patina is a living finish that will gracefully age, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products.
Unlacquered Brass (US3NL) is a custom, made-to-order finish. It is available with an upcharge, per item and requires an additional 2-3 day lead time. This living finish will gracefully age and evolve in appearance over time. Because of this characteristic, no finish warranty is offered on unlacquered brass products.
Brushed Stainless Steel carries a five-year finish warranty. All stainless steel will require some periodic cleaning to keep your hardware looking like new.
Polished Nickel - Lifetime (US14)
5
2019_Emtek_MP_Price_Book.indb 5 7/25/18 7:18 PM
GENE
RAL I
NFOR
MAT
ION
6
ORDERING AND RETURNS
Placing OrdersYou have several options to place an order:• Email: orders@emtek.com• Fax: 800-577-5771• Phone: 800-356-2741, Option 1• Mail: Emtek Products, Inc. 15250 E. Stafford Street City of Industry, CA 91744
Hours of OperationMonday – Friday: 5:00 AM - 5:00 PM Pacific Time.
Minimum Order RequirementsThere are no minimum order quantity requirements.
Payment Terms Net 30 Days on established credit.
Payment OptionsWe accept check, Visa, MasterCard, Discover, AMEX, and ACH.
Sales TaxSales tax will be charged unless a resale certificate has been provided.
PricesAll prices listed are in US funds. Our prices are subject to change without prior notice.
Returns • For your convenience, returns do not require authorization. Returns can be processed directly from the Emtek website, www.emtek.com. • Click on the “Dealer Site” icon on the right side of the bottom half of the www.emtek.com home page, and then select “Product Returns”. Fill out the RGA form, and follow the link to generate a UPS call tag (terms and conditions apply – see the website for details). • A completed RGA form must accompany all packages for returned goods. • Returns are accepted from the Emtek dealer who originally purchased the product that is being returned. Any refund or credit would only be made to the original dealer.• All returned goods are subject to a minimum 25% restocking fee. • Returns for reasons other than an Emtek factory or processing error will be subject to our customary restocking fee with a return freight charge of $15.00 per label/carton in the United States or $30.00 per label/carton in Canada or Mexico. This charge will be deducted from the credit issued for each call tag. • No freight will be charged if the return is sent prepaid.
SHIPPING AND FREIGHT
Shipping CostsAll orders are FOB shipping point. For shipments to dealer specifiedcommercial addresses located in the US, Canada and Mexico, Emtek shipsfreight prepaid. For shipments to dealers located outside of NorthAmerica, freight will be prepaid by Emtek to the U.S. location of thedealer’s freight forwarder. Orders may ship ground service or LTL at ourdiscretion. Orders shipping to a residential address must shipvia 2nd Day with a 20% surcharge.
Shipping OptionsShipments to a commercial address can be upgraded to 2nd Day or NextDay Service for a fee. Orders shipping to a residential address may be upgraded to Next Day Service for a fee. Unfortunately, a dealer’s freight account cannot be used to pay for shipping charges.
Order Lead time Emtek assembles all products to order in City of Industry, California. Orders typically ship within two to three business days once an order is released to the factory.
DEALER INFORMATION PORTAL
Online Account AccessWe are pleased to announce that you can now access your Emtek account information through the ASSA ABLOY dealer information portal. Through the dealer portal you can access information about your account at any time. You can:
• Check on the status of orders• View both order and sales history• View and print order acknowledgements, invoices, statements and credits• Track shipments
To register for the ASSA ABLOY dealer portal or to make changes to access rights, we require the approval from your company’s owner, CEO, President, or other corporate officer. To get started, Click on the “Dealer Site” icon on the bottom half of the www.emtek.com home page, and then select “Forms & Instructions”. Please complete the “Dealer Portal Access Rights Form” and email to: dealerportal.emtek@assaabloy.com. Should you have any questions, please contact Customer Service.
Delivery Location Type of Service Surcharge %*
Commercial Address Second Day 6%
Commercial Address Next Day 16%
Residential Address Second Day (Required) 20%
Residential Address Next Day 25%
*Multiplied by invoice value
2019_Emtek_MP_Price_Book.indb 6 7/25/18 7:18 PM
GENERAL INFORMATION
7
NO CHARGE SAMPLE PROGRAM
Sample ProgramSamples are gladly provided at no charge to authorized dealers, under the following conditions:
• ½ Door Lock Dummy (max 2)• ½ Pair of Hinges (max 2)• Cabinet Knob or Pull (max 3)• Door Accessory (max 1)
A shipping and handling fee of $2.50 per sample will be applied to your order ($2.50 for one sample, $5.00 for two samples, $7.50 for three samples, etc.)
Sample Order Exceptions• Samples must be different product codes.• Samples do not include active door hardware sets, 8” or larger cabinet pulls, door pulls, appliance pulls, electronic locks, entry sets, bath hardware or door accessories over $75 list.
Placing a Sample Order • Send orders to samples@emtek.com or place by fax, phone, or mail. • Write “NO CHARGE SAMPLE” on the order.• Standard shipment upgrade charges will apply for expedited freight requests. • Orders for sample products must be placed separately and not combined with other products.• Emtek does not require samples to be returned.
No Restocking Fee Charged for Sample Orders with Exceptions• Send orders to samples@emtek.com or place by fax, phone, or mail. • Write “DEALER SAMPLE” on the order.• Keep the samples you want and return the samples you don’t.• Contact Customer Service for Return Authorization in advance to ensure a restock fee is not applied to the return.• Product must be returned in its original condition. • Return freight charge of $15.00 per label/carton in the United States or $30.00 per label/carton in Canada or Mexico. This charge will be deducted from the credit issued for each call tag. • No freight will be charged if the return is sent prepaid.
NO CHARGE DISPLAY PROGRAM
Display ProgramEmtek offers a variety of quality, well-crafted displays. We take great pride in the quality of our displays, which are hand-built in our Southern California facility by our talented craftsmen.
• Click on the “Dealer Site” icon on the right side of the bottom half of the www.emtek.com home page, and then select “Displays”. • Browse our online catalog using the navigation system on the left column to view by function, style, or material.
Placing a Display OrderPlease contact your local sales representative for ordering information.
Product for use on Displays in your ShowroomThank you for considering Emtek products for use on door displays and kitchen/bath vignettes installed in your showroom. Please contact your local sales representative for ordering information.
Minimum Advertised Price PolicyEffective February 6, 2017
Emtek has determined that in order to better compete against existing competitors it must exercise a greater degree of control over the distribution of its products. Therefore, all sales of Emtek products will be subject to this Policy. This Policy has been unilaterally adopted and will be enforced strictly and uniformly.
Although resellers remain free to establish their own resale prices, to the extent that any customer elects to advertise products of Emtek in any manner, that is in print, in electronic media, on its website, etc., and provides price information for such products, that price information must be no less than List Price less 20%, this is the Minimum Advertised Price (MAP). Advertisements and offers to sell that do not include a particular price, but require further action that implies a price that is lower than the Minimum Advertised Price violate the MAP Policy. Examples of such unauthorized advertisements include “drop in cart” pricing, “add to cart” pricing, “click to see” pricing, and discount coupon pricing. Also prohibited are advertisements that indicate that discounts may be available when a customer takes specific action that goes beyond buying the product, such as “special price option” or “name your price.”
To assure fair business practices, we will strictly enforce this policy. Violations of this MAP Policy will include termination of our business relationship with a customer. On the first offense there will be a written notice counseling any customer that disregards this policy. Any customer who violates the policy a second time, within one year of receiving a written notice of a first violation, will be terminated.
Emtek will not discuss any conditions of acceptance related to this Policy, as it is non-negotiable and will not be altered for any dealer. In addition, Emtek neither solicits, nor will it accept, any assurance of compliance with this Policy. Nothing in this Policy shall constitute an agreement between Emtek and any reseller that the reseller will comply with this Policy.
2019_Emtek_MP_Price_Book.indb 7 7/25/18 7:18 PM
LEVE
R OP
TION
S
8
MODERN BRASS
SELECT BRASSD
ESIG
NER
Hercules Lever (HEC)
Hermes Lever (HER)
Basel Lever (BA)
Sion Lever (SIO)
Stuttgart Lever (STU)
Freestone Lever (FRL)*
Spencer Lever (SPN)
Geneva Lever (GV)*
Aireon Lever (A)
Argos Lever (AG)
Triton Lever (TRT)
Helios Lever (HLO)
Athena Lever (ATN)
Aston Lever (AST)
Mercury Lever (MC)
Luzern Lever (LU)
Breslin Lever (BRL)
Myles Lever (MYL)*
Poseidon Lever (POS)
Dumont Lever (DT)
L-Square Faceted(LS.FA)
L-Square Hammered(LS.HA)
L-Square Knurled(LS.KN)
L-Square Tribeca(LS.TR)
T-Bar Faceted(TA.FA)*
T-Bar Hammered(TA.HA)*
T-Bar Knurled(TA.KN)*
T-Bar Tribeca(TA.TR)*
CLA
SSIC
SOLID BRASS
Coventry Lever (CV)
Rope Lever (RL)
Cortina Lever (C)
Ribbon & Reed Lever (RBL)
Merrimack Lever (ME)
Turino Lever (T)
Elan Lever (EN)
Santa Fe Lever (SF)
Rustic Lever (R)
Milano Lever (M)
Wembley Lever (WM)
CLA
SSIC
DES
IGN
ER
ARTS & CRAFTS BRASS
Arts & Crafts Lever (AC)
Hammered Lever(HM)
* Note: You will need to ensure the necessary opening/closing clearance when using certain lever designs. Dimensions from the center of the stem to the end of the lever overhang have been provided: T-Bar 3/4”, Geneva 11/8”, Myles 3/4”, Freestone 1”, Yuma 11/8”.
2019_Emtek_MP_Price_Book.indb 8 7/25/18 7:18 PM
LEVER OPTIONS
HANDING OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE
Determining handing for door hardware is different than determining handing for carpentry (ordering and hanging doors). If you follow the standard carpentry rules for handing door hardware, instead of following the diagram below, there is good chance you may end up with a lock that is handed incorrectly. Please refer to the diagram below and if you have any questions, call Customer Service at (800) 356-2741, Option 1.
LEFT(LH)
IN-SWINGDOOR
OUT-SWINGDOOR
IN-SWINGDOOR
OUT-SWINGDOOR
LEFT(LH)
RIGHT(RH)
RIGHT(RH)
9
SANDCAST BRONZE
Cody Lever (CD)
Cimarron Lever (CR)
Durango Lever (D)
Lariat Lever (LR)
Aurora Lever (AR)
Bryce Lever (BR)
Montrose Lever (MT)
Teton Lever (TT)
Yuma Lever (YM)*
Mariposa Lever (MA)
LOST WAX CAST BRONZE
Medici Lever (MDI)
Napoli Lever (NA)
Octagon Lever (OCL)
Padua Lever (PD)
Kiel Lever(KL)
Poseidon Lever(PO)
Stuttgart Lever(STT)
Cologne Lever(CO)
Dresden Lever(DD)
Athena Lever(AT)
Hercules Lever (HS)
Helios Lever(HL)
Hermes Lever(HES)
STAINLESS STEEL
2019_Emtek_MP_Price_Book.indb 9 7/25/18 7:18 PM
10
LEVE
R FI
NISH
AVA
ILAB
ILIT
Y CHA
RT
MODERN BRASS
SELECT BRASS
T-Bar Faceted(TA.FA)
L-Square Faceted(LS.FA)
T-Bar Hammered(TA.HA)
L-Square Hammered(LS.HA)
T-Bar Knurled(TA.KN)
L-Square Knurled(LS.KN)
T-Bar Tribeca(TA.TR)
L-Square Tribeca(LS.TR)
CLA
SSIC
DES
IGN
ER
Hercules Lever (HEC)
Hermes Lever (HER)
Basel Lever (BA)
Sion Lever (SIO)
Stuttgart Lever (STU)
Freestone Lever (FRL)
Spencer Lever (SPN)
Geneva Lever (GV)
Aireon Lever (A)
Argos Lever (AG)
Triton Lever (TRT)
Helios Lever (HLO)
Athena Lever (ATN)
Aston Lever (AST)
Mercury Lever (MC)
Luzern Lever (LU)
Breslin Lever (BRL)
Myles Lever (MYL)
Poseidon Lever (POS)
Dumont Lever (DT)
Coventry Lever (CV)
Rope Lever (RL)
Cortina Lever (C)
Ribbon & Reed Lever (RBL)
Merrimack Lever (ME)
Turino Lever (T)
Elan Lever (EN)
Santa Fe Lever (SF)
Rustic Lever (R)
Milano Lever (M)
Wembley Lever (WM)
CLA
SSIC
DES
IGN
ER
SOLID BRASS
US4 US14LifetimeUS10B US15 US19 US26 US3NL*
ARTS & CRAFTS BRASS
Arts & Crafts Lever (AC)
Hammered Lever(HM)
2019_Emtek_MP_Price_Book.indb 10 7/25/18 7:18 PM
11
LEVER FINISH AVAILABILITY CHART
L-Square Faceted (LS.FA)
T-Bar Faceted (TA.FA)
L-Square Hammered (LS.HA)
T-Bar Hammered (TA.HA)
L-Square Knurled (LS.KN)
T-Bar Knurled (TA.KN)
L-Square Tribeca (LS.TR)
T-Bar Tribeca (TA.TR)
Arts & Crafts Lever (AC)
Hammered Lever (HM)
Arts &Crafts
*Unlacquered Brass (US3NL) is a custom, made-to-order finish. It is available with an upcharge, per item and requires an additional 2-3 day lead time. This living finish will gracefully age and evolve in appearance over time. Because of this characteristic, no finish warranty is offered on unlacquered brass products.
Modern Classic
Brass Levers
Modern Designer
Brass Levers
SELECTBrass
Levers
Myles Lever (MYL)
Geneva Lever (GV)
Aston Lever (AST)
Triton Lever (TRT)
Mercury Lever (MC)
Freestone Lever (FRL)
Argos Lever (AG)
Stuttgart Lever (STU)
Luzern Lever (LU)
Dumont Lever (DT)
Aireon Lever (A)
Spencer Lever (SPN)
Hermes Lever (HER)
Breslin Lever (BRL)
Sion Lever (SIO)
Hercules Lever (HEC)
Basel Lever (BA)
Poseidon Lever (POS)
Helios Lever (HLO)
Athena Lever (ATN)
US7US4US3Lifetime
US14LifetimeUS10B US15 US15A US19 US26 US3NL*
Cortina Lever (C)
Ribbon & Reed Lever (RBL)
Rustic Lever (R)
Santa Fe Lever (SF)
Coventry Lever (CV)
Milano Lever (M)
Rope Lever (RL)
Turino Lever (T)
Wembley Lever (WM)
Elan Lever (EN)
Merrimack Lever (ME)
ClassicBrass
Levers
DesignerBrass
Levers
2019_Emtek_MP_Price_Book.indb 11 7/25/18 7:18 PM
12
LEVE
R FI
NISH
AVA
ILAB
ILIT
Y CHA
RT
SANDCAST BRONZE
LOST WAX CAST BRONZE
Medici Lever (MDI)
Napoli Lever (NA)
Octagon Lever (OCL)
Padua Lever (PD)
MB*FB* TWB*
Cologne Lever(CO)
Stuttgart Lever(STT)
Kiel Lever(KL)
Dresden Lever(DD)
Poseidon Lever(PO)
Athena Lever(AT)
Hercules Lever (HS)
Helios Lever(HL)
Hermes Lever(HES)
STAINLESS STEEL
SS**
Cody Lever (CD)
Cimarron Lever (CR)
Durango Lever (D)
Lariat Lever (LR)
Montrose Lever (MT)
Teton Lever (TT)
Yuma Lever (YM)
Aurora Lever (AR)
Bryce Lever (BR)
Mariposa Lever (MA)
2019_Emtek_MP_Price_Book.indb 12 7/25/18 7:18 PM
13
LEVER FINISH AVAILABILITY CHART
FB* MB* TWB*
Mariposa Lever (MA)
*Bronze Patina is a living finish that will gracefully age, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products.
**Brushed Stainless Steel carries a five-year finish warranty. All stainless steel will require some periodic cleaning to keep your hardware looking like new.
Aurora Lever (AR)
Lariat Lever (LR)
Montrose Lever (MT)
Cimarron Lever (CR)
Bryce Lever (BR)
Cody Lever (CD)
Teton Lever (TT)
Durango Lever (D)
Yuma Lever (YM)
Sandcast Bronze Levers
Lost Wax CastBronze Levers
FB* MB*
Medici Lever (MDI)
Napoli Lever (NA)
Octagon Lever (OCL)
Padua Lever (PD)
Helios Lever (HL)
Poseidon Lever (PO)
Stuttgart Lever (STT)
Athena Lever (AT)
Hercules Lever (HS)
Cologne Lever (CO)
Hermes Lever (HES)
Dresden Lever (DD)
Kiel Lever (KL)
Stainless SteelLevers
SS**
2019_Emtek_MP_Price_Book.indb 13 7/25/18 7:18 PM
14 To order: (W) Product Code + Lever Style + Handing + Finish Code
LARGE MULTI POINT ENTRY SETSAmerican Cylinder Hub, Above / Below Handle35⁄8” Center to Center
23/8” Minimum Backset Required
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
minimum backset
3-5/8”
4-1/2"
4-1/2"
2-3/8”
(92mm)
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 2.5” x 17.5” Plates
BRASS PLATES, MODERN RECTANGULAR STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Satin Brass (US4)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$364.00
$364.00
$364.00
$364.00
1LR1
1LR2
1LR3
1LR4
Keyed with American Cylinder, Hub ABOVE Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Dummy Pair
Keyed with American Cylinder, Hub BELOW Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Dummy Pair
Modern RectangularAmerican Cylinder Below Handle21⁄2” x 171⁄2” Keyed
Modern RectangularAmerican Cylinder Above Handle21⁄2” x 171⁄2” Keyed
*Unlacquered Brass (US3NL) finish available for a $50 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 14 7/25/18 7:18 PM
15emtek.com 800.356.2741
Ref. G-U® LARGE MULTI POINT ENTRY SETS
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
minimum backset
3-5/8”
4-1/2"
4-1/2"
2-3/8”
(92mm)
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 2.9” x 17.5” Plates
BRASS PLATES, MELROSE STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Polished Brass - Lifetime (US3)French Antique (US7)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Pewter (US15A)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$364.00
$364.00
$364.00
$364.00
1LM1
1LM2
1LM3
1LM4
Keyed with American Cylinder, Hub ABOVE Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Dummy Pair
Keyed with American Cylinder, Hub BELOW Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Dummy Pair
Brass MelroseAmerican Cylinder Above Handle27/8” x 171⁄2” Keyed
Brass MelroseAmerican Cylinder Below Handle27/8” x 171⁄2” Keyed
*Unlacquered Brass (US3NL) finish available for a $50 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 15 7/25/18 7:18 PM
16 To order: (W) Product Code + Lever Style + Handing + Finish Code
LARGE MULTI POINT ENTRY SETSAmerican Cylinder Hub, Above / Below Handle35⁄8” Center to Center
23/8” Minimum Backset Required
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
minimum backset
3-5/8”
4-1/2"
4-1/2"
2-3/8”
(92mm)
1LA1
1LA2
1LA3
1LA4
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 3” x 17.5” Plates
SANDCAST BRONZE PLATES, ARCHED STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB) $468.00
$468.00
$468.00
$468.00
Keyed with American Cylinder, Hub ABOVE Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Dummy Pair
Keyed with American Cylinder, Hub BELOW Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)
Dummy Pair
Sandcast Bronze Arched American Cylinder Above Handle3” x 171⁄2” Keyed
Sandcast Bronze Arched American Cylinder Below Handle3” x 171⁄2” Dummy
2019_Emtek_MP_Price_Book.indb 16 7/25/18 7:18 PM
minimum backset
3-5/8”
4-1/2"
4-1/2"
2-3/8”
(92mm)
17emtek.com 800.356.2741
Specification Sheet for Trim and Cylinder Styles LARGE MULTI POINT ENTRY SETS
Steel Spindle
Rosette Screws
Cylinder Tailpiece
CONSTRUCTION KEYING
Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.
Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
- Construction devices used on one or more of last four positions.
- Dimples drilled in plug in this position.
• Lost ball system. • Last four pin locations drilled for lost ball application. • Master key pins used for code variability. • Construction keys and owner keys sent separately. • Order by indicating “Construction Keyed, House #_” next to applicable locks.
Keyed Plates with American Cylinder
Standard Components:• Single Cylinder Tailpiece• 3 3/4” Steel Spindle• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Standard Components:• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Extended Components:• Long Single Cylinder Tailpiece• 4 1/2” Steel Spindle• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
Extended Components:• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
Dummy Plates
Standard Door Thickness: from 15/8” to 2”
Standard Door Thickness: from 15/8” to 2”
Extended Door Thickness: Over 2” to 23/4”
Extended Door Thickness: Over 2” to 23/4”
01_Large_MP.indd 17 7/26/18 12:40 PM
18 To order: Product Code + Lever Style + Handing + Finish Code
LARGE MULTI POINT ENTRY SETSEuro Cylinder Hub, Below Handle35/8” Center to Center
23/8” Minimum Backset Required
Handing Required• Key codes may be specified. Fits standard door thickness of 13/4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Weiser® keyway not available with Euro cylinder.
(92mm)
minimum backset
3-5/8”
4-1/2"
4-1/2"
2-3/8”
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 2.5” x 17.5” Plates
BRASS PLATES, MODERN RECTANGULAR STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Satin Brass (US4)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
Keyed with Euro Profile Cylinder , Hub BELOW Handle (Schlage® Keyway standard, Rekeyable)
Dummy Pair
$364.00
$364.00
2LR1
2LR2
Modern RectangularEuro Cylinder Below Handle21⁄2” x 171⁄2” Keyed
Modern RectangularEuro Cylinder Below Handle21⁄2” x 171⁄2” Dummy
*Unlacquered Brass (US3NL) finish available for a $50 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 18 7/25/18 7:18 PM
19emtek.com 800.356.2741
Ref. G-U® LARGE MULTI POINT ENTRY SETS
Handing Required• Key codes may be specified. Fits standard door thickness of 13/4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Weiser® keyway not available with Euro cylinder.
(92mm)
minimum backset
3-5/8”
4-1/2"
4-1/2"
2-3/8”
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 2.9” x 17.5” Plates
BRASS PLATES, MELROSE STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Polished Brass - Lifetime (US3)French Antique (US7)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Pewter (US15A)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
Keyed with Euro Profile Cylinder , Hub BELOW Handle (Schlage® Keyway standard, Rekeyable)
Dummy Pair
$364.00
$364.00
2LM1
2LM2
Brass MelroseEuro Cylinder Below Handle27/8” x 171⁄2” Keyed
*Unlacquered Brass (US3NL) finish available for a $50 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 19 7/25/18 7:18 PM
(92mm)
minimum backset
3-5/8”
4-1/2"
4-1/2"
2-3/8”
20 To order: Product Code + Lever Style + Handing + Finish Code
LARGE MULTI POINT ENTRY SETSEuro Cylinder Hub, Below Handle35/8” Center to Center
23/8” Minimum Backset Required
Handing Required• Key codes may be specified. Fits standard door thickness of 13/4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Weiser® keyway not available with Euro cylinder.
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 3” x 17.5” Plates
SANDCAST BRONZE PLATES, ARCHED STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB) Keyed with Euro Profile Cylinder , Hub BELOW Handle
(Schlage® Keyway standard, Rekeyable)
Dummy Pair
$468.00
$468.00
2LA1
2LA2
Sandcast Bronze Arched Euro Cylinder Below Handle3” x 171⁄2” Keyed
2019_Emtek_MP_Price_Book.indb 20 7/25/18 7:18 PM
(92mm)
21emtek.com 800.356.2741
Specification Sheet for Trim and Cylinder Styles LARGE MULTI POINT ENTRY SETS
CUSTOM KEYINGCharge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
Keyed Plates with Euro Profile Cylinder
Standard Components:• 2 9/16” Euro Profile Cylinder• 3 3/4” Steel Spindle• 1 1/2” Rosette Screws
Extended Components:• 3 5/32” Euro Profile Cylinder• 4 1/2” Steel Spindle• 2” Rosette Screws
Extended Components:• 3 17/32” Euro Profile Cylinder• 5” Steel Spindle• 3” Rosette Screws
Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 21/2” Extended Door Thickness: Over 21/2”to 23/4”
Steel Spindle
Rosette Screws
Full Euro Profile Cylinder
CylinderScrew
CY4-ERSGL35
CY4-ERSGL32
CY4-ERSGL25
Dummy Plates
Standard Components:• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Extended Components:• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 23/4”
minimum backset
3-5/8”
4-1/2"
4-1/2"
2-3/8”
2019_Emtek_MP_Price_Book.indb 21 7/25/18 7:18 PM
DOOR CONFIGURATION #1
American Cylinder Hub Below Handle35⁄8” Center-to-Center
ref. Atrium®, G-U®, KML by Andersen®, Andersen® Marvin Integrity®, Paddock Lockmaster™, Superior®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
22 To order: (W) Product Code + Lever Style + Handing + Finish Code
Brass Concord11⁄2” x 11” Non-KeyedRustic Levers
Brass Concord2” x 10” KeyedCortina Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1171
1172117311741175
1181
1182118311841185
BRASS PLATES, CONCORD STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Polished Brass - Lifetime (US3)French Antique (US7)Oil Rubbed Bronze (US10B)Satin Nickel (US15)Pewter (US15A)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 22 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
23emtek.com 800.356.2741
ref. Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior® DOOR CONFIGURATION #1
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
11A1
11A211A311A411A5
11B1
11B211B311B411B5
BRASS PLATES, MODERN STYLE
See Page 8 for Brass & Modern Brass Lever Options.
$203.00
Brass Modern2” x 10” KeyedTriton Levers
Brass Modern11⁄2” x 11” Non-KeyedLuzern Levers
Stainless Steel2” x 10” KeyedDresden Levers
Stainless Steel11⁄2” x 11” Non-KeyedAthena Levers
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
11A1
11A211A311A411A5
11B1
11B211B311B411B5
STAINLESS STEEL PLATES, MODERN STYLE
See Page 9 for Stainless Steel Lever Options.
Stainless Steel (SS) $203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
Satin Brass (US4)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
2019_Emtek_MP_Price_Book.indb 23 7/25/18 7:18 PM
24 To order: (W) Product Code + Lever Style + Handing + Finish Code
DOOR CONFIGURATION #1
American Cylinder Hub Below Handle35⁄8” Center-to-Center
ref. Atrium®, G-U®, KML by Andersen®, Andersen® Marvin Integrity®, Paddock Lockmaster™, Superior®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1111
1112111311141115
1121
1122112311241125
SANDCAST BRONZE PLATES, ARCHED STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
Sandcast Arched11⁄2” x 11” Non-KeyedCimarron Levers
Sandcast Arched2” x 10” KeyedDurango Levers
2019_Emtek_MP_Price_Book.indb 24 7/25/18 7:18 PM
25emtek.com 800.356.2741
ref. Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior® DOOR CONFIGURATION #1
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
Bronze Tuscany11⁄2” x 11” Non-KeyedOctagon Levers
Bronze Tuscany2” x 10” KeyedMedici Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1131
1132113311341135
1141
1142114311441145
LOST WAX CAST BRONZE PLATES, TUSCANY STYLE
See Page 9 for Lost Wax Cast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)
$226.00
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1151
1152115311541155
1161
1162116311641165
SANDCAST BRONZE PLATES, RECTANGULAR STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
Sandcast Rectangular2” x 10” KeyedMontrose Levers
Sandcast Rectangular11⁄2” x 11” Non-KeyedCody Levers
2019_Emtek_MP_Price_Book.indb 25 7/25/18 7:18 PM
26 Decorative Multi Point Lock Trim for Swinging Patio Doors
DOOR CONFIGURATION #1 Specification Sheet for Components and Door Thickness
Door Configuration # 1 American Cylinder Below Handle 3 5/8" Center-to-Center
Steel Spindle
Rosette Screws
Cylinder Tailpiece
Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Components:• Single Cylinder Tailpiece• 3 3/4” Steel Spindle• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Standard Components:• Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Extended Components:• Long Single Cylinder Tailpiece• 4 1/2” Steel Spindle• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
Extended Components:• Long Thumbturn Tailpiece• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”
Standard Door Thickness: from 15/8” to 2”
Extended Door Thickness: Over 2” to 23/4”
Extended Door Thickness: Over 2” to 23/4”
CONSTRUCTION KEYING
Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.
Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
- Construction devices used on one or more of last four positions.
- Dimples drilled in plug in this position.
• Lost ball system. • Last four pin locations drilled for lost ball application. • Master key pins used for code variability. • Construction keys and owner keys sent separately. • Order by indicating “Construction Keyed, House #_” next to applicable locks.
2019_Emtek_MP_Price_Book.indb 26 7/25/18 7:18 PM
27emtek.com 800.356.2741
Specification Sheet for Trim and Cylinder Styles DOOR CONFIGURATION #1
2” x 10” Plates, Product Codes 1121, 1141, 1161, 1181, 11B11 1⁄2” x 11” Plates, Product Codes 1111, 1131, 1151, 1171, 11A1
2” x 10” Plates, Product Codes 1122, 1142, 1162, 1182, 11B21 1⁄2” x 11” Plates, Product Codes 1112, 1132, 1152, 1172, 11A2
1 1⁄2” x 11” Plates, Product Codes 1113, 1133, 1153, 1173, 11A3 2” x 10” Plates, Product Codes 1123, 1143, 1163, 1183, 11B3
2” x 10” Plates, Product Codes 1124, 1144, 1164, 1184, 11B41 1⁄2” x 11” Plates, Product Codes 1114, 1134, 1154, 1174, 11A4
1 1⁄2” x 11” Plates, Product Codes 1115, 1135, 1155, 1175, 11A5 2” x 10” Plates, Product Codes 1125, 1145, 1165, 1185, 11B5
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior®
Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Non-Keyed, Passage (for Semi-Active Door)
Non-Keyed, American Style Thumbturn Inside (for Active Door)
Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Dummy Pair (for Non-Active Door)
Fixed
Fixed Fixed Fixed
Fixed
Fixed
2019_Emtek_MP_Price_Book.indb 27 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #2
American Cylinder Hub Above Handle35/8” Center-to-Center
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
28 To order: (W) Product Code + Lever Style + Handing + Finish Code
Handing required. Key codes may be specified. Fit standard door thickness of 13/4”, specify if different. Set includes Plates, Handles and Cylinders (where applicable).Weiser®(WR5) Keyway: Specify by adding "W" to the beginning of Product Code. No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
Brass Concord2” x 10” Non-KeyedSanta Fe Levers
Brass Concord11⁄2” x 11” Non-KeyedTurino Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1271
1272127312741275
1281
1282128312841285
BRASS PLATES, CONCORD STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Polished Brass - Lifetime (US3)French Antique (US7)Oil Rubbed Bronze (US10B)Satin Nickel (US15)Pewter (US15A)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 28 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
29emtek.com 800.356.2741
Handing required. Key codes may be specified. Fit standard door thickness of 13/4”, specify if different. Set includes Plates, Handles and Cylinders (where applicable).Weiser®(WR5) Keyway: Specify by adding "W" to the beginning of Product Code. No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen® DOOR CONFIGURATION #2
Brass Modern11⁄2” x 11” Non-KeyedHelios Levers
Brass Modern2” x 10” Non-KeyedHercules Levers
Stainless Steel2” x 10” Non-KeyedHermes Levers
Stainless Steel11⁄2” x 11” KeyedPoseidon Levers
See Page 8 for Brass & Modern Brass Lever Options.
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
12A1
12A212A312A412A5
12B1
12B212B312B412B5
BRASS PLATES, MODERN STYLE
Satin Brass (US4)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$203.00
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
12A1
12A212A312A412A5
12B1
12B212B312B412B5
STAINLESS STEEL PLATES, MODERN STYLE
See Page 9 for Stainless Steel Lever Options.
Stainless Steel (SS) $203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 29 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #2
American Cylinder Hub Above Handle35⁄8” Center-to-Center
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
30 To order: (W) Product Code + Lever Style + Handing + Finish Code
Sandcast Arched2” x 10” KeyedTeton Levers
Sandcast Arched11⁄2” x 11” KeyedDurango Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1211
1212121312141215
1221
1222122312241225
SANDCAST BRONZE PLATES, ARCHED STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
2019_Emtek_MP_Price_Book.indb 30 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
31emtek.com 800.356.2741
ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen® DOOR CONFIGURATION #2
Sandcast Rectangular2” x 10” KeyedMontrose Levers
Sandcast Rectangular11⁄2” x 11” KeyedLariat Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1251
1252125312541255
1261
1262126312641265
SANDCAST BRONZE PLATES, RECTANGULAR STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
Bronze Tuscany11⁄2” x 11” Non-KeyedNapoli Levers
Bronze Tuscany2” x 10” Non-KeyedPadua Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1231
1232123312341235
1241
1242124312441245
LOST WAX CAST BRONZE PLATES, TUSCANY STYLE
See Page 9 for Lost Wax Cast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)
$226.00
2019_Emtek_MP_Price_Book.indb 31 7/25/18 7:18 PM
32 Decorative Multi Point Lock Trim for Swinging Patio Doors
DOOR CONFIGURATION #2 Specification Sheet for Components and Door Thickness
Door Configuration #2 American Cylinder Above Handle 3 5/8" Center-to-Center
Steel Spindle
Rosette Screws
Cylinder Tailpiece
Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
CONSTRUCTION KEYING
Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.
Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
- Construction devices used on one or more of last four positions.
- Dimples drilled in plug in this position.
• Lost ball system. • Last four pin locations drilled for lost ball application. • Master key pins used for code variability. • Construction keys and owner keys sent separately. • Order by indicating “Construction Keyed, House #_” next to applicable locks.
Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”
Standard Door Thickness: from 15/8” to 2”
Extended Door Thickness: Over 2” to 23/4”
Extended Door Thickness: Over 2” to 23/4”
Standard Components:• Single Cylinder Tailpiece• 3 3/4” Steel Spindle• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Standard Components:• Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Extended Components:• Long Single Cylinder Tailpiece• 4 1/2” Steel Spindle• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
Extended Components:• Long Thumbturn Tailpiece• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
2019_Emtek_MP_Price_Book.indb 32 7/25/18 7:18 PM
33emtek.com 800.356.2741
Specification Sheet for Trim and Cylinder Styles DOOR CONFIGURATION #2
2” x 10” Plates, Product Codes 1221, 1241, 1261, 1281, 12B1
2” x 10” Plates, Product Codes 1222, 1242, 1262, 1282, 12B2
2” x 10” Plates, Product Codes 1224, 1244, 1264, 1284, 12B4
1 1⁄2” x 11” Plates, Product Codes 1215, 1235, 1255, 1275, 12A5
1 1⁄2” x 11” Plates, Product Codes 1211, 1231, 1251, 1271, 12A1
1 1⁄2” x 11” Plates, Product Codes 1212, 1232, 1252, 1272, 12A2
1 1⁄2” x 11” Plates, Product Codes 1213, 1233, 1253, 1273, 12A3 2” x 10” Plates, Product Codes 1223, 1243, 1263, 1283, 12B3
1 1⁄2” x 11” Plates, Product Codes 1214, 1234, 1254, 1274, 12A4
2” x 10” Plates, Product Codes 1225, 1245, 1265, 1285, 12B5
Fixed
Fixed Fixed
Fixed
Fixed Fixed
Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Non-Keyed, Passage (for Semi-Active Door)
Non-Keyed, American Style Thumbturn Inside (for Active Door)
Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Dummy Pair (for Non-Active Door)
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®
2019_Emtek_MP_Price_Book.indb 33 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #3
American Cylinder Hub Above Handle41⁄8” Center-to-Center
ref. Andersen®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
34 To order: (W) Product Code + Lever Style + Handing + Finish Code
Brass Concord11⁄2” x 11” KeyedWembley Levers
Brass Concord2” x 10” Non-KeyedRope Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1371
137213731374
1375
1381
138213831384
1385
BRASS PLATES, CONCORD STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Polished Brass - Lifetime (US3)French Antique (US7)Oil Rubbed Bronze (US10B)Satin Nickel (US15)Pewter (US15A)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 34 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
35emtek.com 800.356.2741
ref. Andersen® DOOR CONFIGURATION #3Brass Modern11⁄2” x 11” KeyedAireon Levers
Brass Modern2” x 10” KeyedHelios Levers
Stainless Steel11⁄2” x 11” KeyedAthena Levers
Stainless Steel2” x 10” Non-KeyedDresden Levers
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
13A1
13A213A313A413A5
13B1
13B213B313B413B5
BRASS PLATES, MODERN STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Satin Brass (US4)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$203.00
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
13A1
13A213A313A413A5
13B1
13B213B313B413B5
STAINLESS STEEL PLATES, MODERN STYLE
See Page 9 for Stainless Steel Lever Options.
Stainless Steel (SS) $203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 35 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #3
American Cylinder Hub Above Handle41⁄8” Center-to-Center
ref. Andersen®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
36 To order: (W) Product Code + Lever Style + Handing + Finish Code
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1311
1312131313141315
1321
1322
132313241325
SANDCAST BRONZE PLATES, ARCHED STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
Sandcast Arched11⁄2” x 11” KeyedDurango Levers
Sandcast Arched2” x 10” Non-KeyedCody Levers
2019_Emtek_MP_Price_Book.indb 36 7/25/18 7:18 PM
Bronze Tuscany2” x 10” Non-KeyedPadua Levers
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
37emtek.com 800.356.2741
ref. Andersen® DOOR CONFIGURATION #3
Bronze Tuscany11⁄2” x 11” KeyedMedici Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1331
1332133313341335
1341
1342134313441345
LOST WAX CAST BRONZE PLATES, TUSCANY STYLE
See Page 9 for Lost Wax Cast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)
$226.00
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1351
1352135313541355
1361
1362136313641365
SANDCAST BRONZE PLATES, RECTANGULAR STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
Sandcast Rectangular11⁄2” x 11” KeyedLariat Levers
Sandcast Rectangular2” x 10” KeyedMontrose Levers
2019_Emtek_MP_Price_Book.indb 37 7/25/18 7:18 PM
38 Decorative Multi Point Lock Trim for Swinging Patio Doors
DOOR CONFIGURATION #3 Specification Sheet for Components and Door Thickness
Door Configuration #3 American Cylinder Above Handle 4 1/8" Center-to-Center
Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
CONSTRUCTION KEYING
Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.
Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
- Construction devices used on one or more of last four positions.
- Dimples drilled in plug in this position.
• Lost ball system. • Last four pin locations drilled for lost ball application. • Master key pins used for code variability. • Construction keys and owner keys sent separately. • Order by indicating “Construction Keyed, House #_” next to applicable locks.
Steel Spindle
Rosette Screws
Cylinder TailpieceIncludes Configuration #3Special Mounting Hardware
Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”
Standard Door Thickness: from 15/8” to 2”
Extended Door Thickness: Over 2” to 23/4”
Extended Door Thickness: Over 2” to 23/4”
Standard Components:• Single Cylinder Tailpiece• 3 3/4” Steel Spindle• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Standard Components:• Configuration #3 Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Extended Components:• Single Cylinder Tailpiece• 4 1/2” Steel Spindle• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
Extended Components:• Configuration #3 Thumbturn Tailpiece• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
2019_Emtek_MP_Price_Book.indb 38 7/25/18 7:18 PM
2” x 10” Plates, Product Codes 1321, 1341, 1361, 1381, 13B1
Fixed
Fixed Fixed Fixed Fixed
39emtek.com 800.356.2741
Specification Sheet for Trim and Cylinder Styles DOOR CONFIGURATION #3
2” x 10” Plates, Product Codes 1322, 1342, 1362, 1382, 13B2
2” x 10” Plates, Product Codes 1323, 1343, 1363, 1383, 13B3
2” x 10” Plates, Product Codes 1325, 1345, 1365, 1385, 13B5
2” x 10” Plates, Product Codes 1324, 1344, 1364, 1384, 13B4
1 1⁄2” x 11” Plates, Product Codes 1311, 1331, 1351, 1371, 13A1
1 1⁄2” x 11” Plates, Product Codes 1312, 1332, 1352, 1372, 13A2
1 1⁄2” x 11” Plates, Product Codes 1313, 1333, 1353, 1373, 13A3
1 1⁄2” x 11” Plates, Product Codes 1314, 1334, 1354, 1374, 13A4
1 1⁄2” x 11” Plates, Product Codes 1315, 1335, 1355, 1375, 13A5
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.Andersen®
Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Non-Keyed, Passage (for Semi-Active Door)
Non-Keyed, American Style Thumbturn Inside (for Active Door)
Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Dummy Pair (for Non-Active Door)
Fixed
2019_Emtek_MP_Price_Book.indb 39 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #4American Cylinder Hub Above Handle35⁄8” Center-to-Center
ref. Ashland®, G-U®, Caradco®, JELD-WEN® Jeldwen® Custom Collection (formerly Pozzi®) Marvin®, PGT®, Premium Collection (formerly Norco®) Weathershield®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminatessagging handles.
See Configuration #1 for Marvin Integrity® Doors
40 To order: (W) Product Code + Lever Style + Handing + Finish Code
Brass Concord11⁄2” x 11” KeyedCoventry Levers
Brass Concord2” x 10” Non-KeyedSanta Fe Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1471
1472147314741475
1481
1482148314841485
BRASS PLATES, CONCORD STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Polished Brass - Lifetime (US3)French Antique (US7)Oil Rubbed Bronze (US10B)Satin Nickel (US15)Pewter (US15A)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 40 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
41emtek.com 800.356.2741
ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection, Marvin®, PGT®, Premium Collection, Weathershield® DOOR CONFIGURATION #4
Brass Modern11⁄2” x 11” KeyedAireon Levers
Stainless Steel11⁄2” x 11” KeyedStuttgart Levers
Brass Modern2” x 10” Non-KeyedHercules Levers
Stainless Steel2” x 10” Non-KeyedHermes Levers
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
14A1
14A214A314A414A5
14B1
14B214B314B414B5
BRASS PLATES, MODERN STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Satin Brass (US4)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$203.00
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
14A1
14A214A314A414A5
14B1
14B214B314B414B5
STAINLESS STEEL PLATES, MODERN STYLE
See Page 9 for Stainless Steel Lever Options.
Stainless Steel (SS) $203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 41 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #4American Cylinder Hub Above Handle35⁄8” Center-to-Center
ref. Ashland®, G-U®, Caradco®, JELD-WEN® Jeldwen® Custom Collection (formerly Pozzi®) Marvin®, PGT®, Premium Collection (formerly Norco®) Weathershield®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminatessagging handles.
See Configuration #1 for Marvin Integrity® Doors
42 To order: (W) Product Code + Lever Style + Handing + Finish Code
Sandcast Arched11⁄2” x 11” KeyedMontrose Levers
Sandcast Arched2” x 10” Non-KeyedCody Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1411
1412141314141415
1421
1422142314241425
SANDCAST BRONZE PLATES, ARCHED STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
2019_Emtek_MP_Price_Book.indb 42 7/25/18 7:18 PM
Sandcast Rectangular2” x 10” KeyedTeton Levers
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
43emtek.com 800.356.2741
ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection, Marvin®, PGT®, Premium Collection, Weathershield® DOOR CONFIGURATION #4
Bronze Tuscany11⁄2” x 11” Non-KeyedNapoli Levers
Bronze Tuscany2” x 10” KeyedNapoli Levers
Sandcast Rectangular11⁄2” x 11” KeyedLariat Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1431
1432143314341435
1441
1442144314441445
LOST WAX CAST BRONZE PLATES, TUSCANY STYLE
See Page 9 for Lost Wax Cast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)
$226.00
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1451
1452145314541455
1461
1462146314641465
SANDCAST BRONZE PLATES, RECTANGULAR STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
2019_Emtek_MP_Price_Book.indb 43 7/25/18 7:18 PM
44 Decorative Multi Point Lock Trim for Swinging Patio Doors
DOOR CONFIGURATION #4 Specification Sheet for Components and Door Thickness
Door Configuration #4 American Cylinder Above Handle 3 5/8" Center-to-Center
Steel Spindle
Rosette Screws
Cylinder Tailpiece
CONSTRUCTION KEYING
Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.
Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
- Construction devices used on one or more of last four positions.
- Dimples drilled in plug in this position.
• Lost ball system. • Last four pin locations drilled for lost ball application. • Master key pins used for code variability. • Construction keys and owner keys sent separately. • Order by indicating “Construction Keyed, House #_” next to applicable locks.
Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”
Standard Door Thickness: from 15/8” to 2”
Extended Door Thickness: Over 2” to 23/4”
Extended Door Thickness: Over 2” to 23/4”
Standard Components:• Single Cylinder Tailpiece• 3 3/4” Steel Spindle• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door
Standard Components:• Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door
Extended Components:• Long Single Cylinder Tailpiece• 4 1/2” Steel Spindle• 2 1/2” Rosette Screws 2” - 2 1/4” think door• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door
Extended Components:• Long Thumbturn Tailpiece• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 1/2” Rosette Screws 2” - 2 1/4” think door• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door
2019_Emtek_MP_Price_Book.indb 44 7/25/18 7:18 PM
45emtek.com 800.356.2741
Specification Sheet for Trim and Cylinder Styles DOOR CONFIGURATION #4Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection (formerly Pozzi®), Marvin®, PGT®, Premium Collection (formerly Norco®), Weathershield®
Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Non-Keyed, Passage (for Semi-Active Door)
Non-Keyed, American Style Thumbturn Inside (for Active Door)
Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Dummy Pair (for Non-Active Door)
2” x 10” Plates, Product Codes 1421, 1441, 1461, 1481, 14B11 1⁄2” x 11” Plates, Product Codes 1411, 1431, 1451, 1471, 14A1
1 1⁄2” x 11” Plates, Product Codes 1412, 1432, 1452, 1472, 14A2
1 1⁄2” x 11” Plates, Product Codes 1413, 1433, 1453, 1473, 14A3
1 1⁄2” x 11” Plates, Product Codes 1414, 1434, 1454, 1474, 14A4
1 1⁄2” x 11” Plates, Product Codes 1415, 1435, 1455, 1475, 14A5
2” x 10” Plates, Product Codes 1422, 1442, 1462, 1482, 14B2
2” x 10” Plates, Product Codes 1423, 1443, 1463, 1483, 14B3
2” x 10” Plates, Product Codes 1425, 1445, 1465, 1485, 14B5
2” x 10” Plates, Product Codes 1424, 1444, 1464, 1484, 14B4
Fixed
Fixed Fixed Fixed
Fixed
Fixed
2019_Emtek_MP_Price_Book.indb 45 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Weiser® keyway not available for Configuration 5, Euro cylinder.
DOOR CONFIGURATION #5Euro Profile Cylinder Below Handle35⁄8” Center-to-Center
ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®Semco®, Sierra Pacific®, Signature®, Simpson® Therma-Tru®, Vetter®, Willmar®, Windsor® Weathershield®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
46 To order: Product Code + Lever Style + Handing + Finish Code
Brass Concord11⁄2” x 11” KeyedTurino Levers
Brass Concord2” x 10” KeyedRustic Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1571
157215731574
1575
1581
1582158315841585
BRASS PLATES, CONCORD STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Polished Brass - Lifetime (US3)French Antique (US7)Oil Rubbed Bronze (US10B)Satin Nickel (US15)Pewter (US15A)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 46 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Weiser® keyway not available for Configuration 5, Euro cylinder.
47emtek.com 800.356.2741
DOOR CONFIGURATION #5ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®, Semco®Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®
Brass Modern11⁄2” x 11” KeyedHermes Levers
Brass Modern2” x 10” KeyedTriton Levers
Stainless Steel2” x 10” Non-KeyedHercules Levers
Stainless Steel11⁄2” x 11” KeyedStuttgart Levers
See Page 8 for Brass & Modern Brass Lever Options.
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
15A1
15A215A315A415A5
15B1
15B215B315B415B5
BRASS PLATES, MODERN STYLE
Satin Brass (US4)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$203.00
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
15A1
15A215A315A415A5
15B1
15B215B315B415B5
STAINLESS STEEL PLATES, MODERN STYLE
See Page 9 for Stainless Steel Lever Options.
Stainless Steel (SS) $203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 47 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Weiser® keyway not available for Configuration 5, Euro cylinder.
DOOR CONFIGURATION #5Euro Profile Cylinder Below Handle35⁄8” Center-to-Center
ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®Semco®, Sierra Pacific®, Signature®, Simpson® Therma-Tru®, Vetter®, Willmar®, Windsor® Weathershield®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
48 To order: Product Code + Lever Style + Handing + Finish Code
Sandcast Arched11⁄2” x 11” KeyedLariat Levers
Sandcast Arched2” x 10” KeyedDurango Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1511
1512151315141515
1521
1522152315241525
SANDCAST BRONZE PLATES, ARCHED STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
2019_Emtek_MP_Price_Book.indb 48 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Weiser® keyway not available for Configuration 5, Euro cylinder.
49emtek.com 800.356.2741
DOOR CONFIGURATION #5ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®, Semco®Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®
Bronze Tuscany11⁄2” x 11” KeyedOctagon Levers
Sandcast Rectangular2” x 10” Non-KeyedMontrose Levers
Sandcast Rectangular11⁄2” x 11” KeyedTeton Levers
Bronze Tuscany2” x 10” KeyedPadua Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1531
1532153315341535
1541
154215431544
1545
LOST WAX CAST BRONZE PLATES, TUSCANY STYLE
See Page 9 for Lost Wax Cast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)
$226.00
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1551
1552155315541555
1561
1562156315641565
SANDCAST BRONZE PLATES, RECTANGULAR STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
2019_Emtek_MP_Price_Book.indb 49 7/25/18 7:18 PM
50 Decorative Multi Point Lock Trim for Swinging Patio Doors
DOOR CONFIGURATION #5 Specification Sheet for Components and Door Thickness
Door Configuration #5 Euro Profile Cylinder Below Handle 3 5/8" Center-to-Center
CUSTOM KEYINGCharge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
Keyed Plates with Euro Profile Cylinder
Standard Components:• 2 9/16” Euro Profile Cylinder• 3 3/4” Steel Spindle• 1 1/2” Rosette Screws
Extended Components:• 3 5/32” Euro Profile Cylinder• 4 1/2” Steel Spindle• 2” Rosette Screws
Extended Components:• 3 17/32” Euro Profile Cylinder• 5” Steel Spindle• 3” Rosette Screws
Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 21⁄2” Extended Door Thickness: Over 21⁄2”to 23/4”
Standard Components:• 1 21/32” Euro Profile Half-Cylinder• 3 3/4” Steel Spindle• 1 1/2” Rosette Screws
Extended Components:• 1 31/32” Euro Profile Half-Cylinder• 4 1/2” Steel Spindle• 2” Rosette Screws
Extended Components:• 2 5/32” Euro Profile Half-Cylinder• 5” Steel Spindle• 3” Rosette Screws
Non-Keyed Plates with Euro Profile Half Cylinder
Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 21⁄2” Extended Door Thickness: Over 21⁄2”to 23/4”
Steel Spindle
Rosette Screws
Full Euro Profile Cylinder
CylinderScrew
Full Euro Profile Cylinder Half Euro Profile Cylinder
CY4-ERSGL35
CY4-ERSGL32
CY4-ERSGL25 CY4-ERHLF16TT
CY4-ERHLF19TT
CY4-ERHLF21TT
Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Components:• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Extended Components:• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 23/4”
2019_Emtek_MP_Price_Book.indb 50 7/25/18 7:18 PM
Fixed
Fixed Fixed
Fixed
Fixed Fixed
51emtek.com 800.356.2741
Specification Sheet for Trim and Cylinder Styles DOOR CONFIGURATION #5
2” x 10” Plates, Product Codes 1524, 1544, 1564, 1584, 15B4
1 1⁄2” x 11” Plates, Product Codes 1511, 1531, 1551, 1571, 15A1
1 1⁄2” x 11” Plates, Product Codes 1512, 1532, 1552, 1572, 15A2
1 1⁄2” x 11” Plates, Product Codes 1513, 1533, 1553, 1573, 15A3 2” x 10” Plates, Product Codes 1523, 1543, 1563, 1583, 15B3
1 1⁄2” x 11” Plates, Product Codes 1514, 1534, 1554, 1574, 15A4
2” x 10” Plates, Product Codes 1525, 1545, 1565, 1585, 15B51 1⁄2” x 11” Plates, Product Codes 1515, 1535, 1555, 1575, 15A5
2” x 10” Plates, Product Codes 1522, 1542, 1562, 1582, 15B2
2” x 10” Plates, Product Codes 1521, 1541, 1561, 1581, 15B1
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®,
Semco®, Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®
Keyed with Euro Profile Cylinder (for Active Door, Schlage® Keyway Standard, Rekeyable)
Non-Keyed, Passage (for Semi-Active Door)
Non-Keyed, Euro Profile Style Thumbturn Inside (for Active Door)
Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Dummy Pair (for Non-Active Door)
2019_Emtek_MP_Price_Book.indb 51 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #6
American Cylinder Hub Below Handle35⁄8” Center-to-Center
ref. Milgard®, Pella®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
52 To order: (W) Product Code + Lever Style + Handing + Finish Code
Brass Concord11⁄2” x 11” KeyedCortina Levers
Brass Concord2” x 10” Non-KeyedSanta Fe Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1671
1672167316741675
1681
1682168316841685
BRASS PLATES, CONCORD STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Polished Brass - Lifetime (US3)French Antique (US7)Oil Rubbed Bronze (US10B)Satin Nickel (US15)Pewter (US15A)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 52 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
53emtek.com 800.356.2741
ref. Milgard®, Pella® DOOR CONFIGURATION #6Brass Modern11⁄2” x 11” Non-KeyedHercules Levers
Brass Modern2” x 10” Non-KeyedLuzern Levers
Stainless Steel11⁄2” x 11” Non-KeyedAthena Levers
Stainless Steel2” x 10” Non-KeyedHercules Levers
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
16A1
16A216A316A416A5
16B1
16B216B316B416B5
BRASS PLATES, MODERN STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Satin Brass (US4)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
$203.00
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
16A1
16A216A316A416A5
16B1
16B216B316B416B5
STAINLESS STEEL PLATES, MODERN STYLE
See Page 9 for Stainless Steel Lever Options.
Stainless Steel (SS) $203.00
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 53 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #6
American Cylinder Hub Below Handle35⁄8” Center-to-Center
ref. Milgard®, Pella®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
54 To order: (W) Product Code + Lever Style + Handing + Finish Code
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1611
1612161316141615
1621
1622162316241625
SANDCAST BRONZE PLATES, ARCHED STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
Sandcast Arched11⁄2” x 11” Non-KeyedTeton Levers
Sandcast Arched2” x 10” KeyedDurango Levers
2019_Emtek_MP_Price_Book.indb 54 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
55emtek.com 800.356.2741
ref. Milgard®, Pella® DOOR CONFIGURATION #6Sandcast Rectangular2” x 10” KeyedMontrose Levers
Sandcast Rectangular11⁄2” x 11” Non-KeyedLariat Levers
Bronze Tuscany11⁄2” x 11” KeyedOctagon Levers
Bronze Tuscany2” x 10” Non-KeyedNapoli Levers
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1631
1632163316341635
1641
1642164316441645
LOST WAX CAST BRONZE PLATES, TUSCANY STYLE
See Page 9 for Lost Wax Cast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)
$226.00
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair
1651
1652165316541655
1661
1662166316641665
SANDCAST BRONZE PLATES, RECTANGULAR STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
2019_Emtek_MP_Price_Book.indb 55 7/25/18 7:18 PM
56 Decorative Multi Point Lock Trim for Swinging Patio Doors
DOOR CONFIGURATION #6 Specification Sheet for Components and Door Thickness
Door Configuration #6 American Cylinder Below Handle 3 5/8" Center-to-Center
Steel Spindle
Rosette Screws
Cylinder Tailpiece
Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
CONSTRUCTION KEYING
Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.
Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
- Construction devices used on one or more of last four positions.
- Dimples drilled in plug in this position.
• Lost ball system. • Last four pin locations drilled for lost ball application. • Master key pins used for code variability. • Construction keys and owner keys sent separately. • Order by indicating “Construction Keyed, House #_” next to applicable locks.
Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”
Standard Door Thickness: from 15/8” to 2”
Extended Door Thickness: Over 2” to 23/4”
Extended Door Thickness: Over 2” to 23/4”
Standard Components:• Single Cylinder Tailpiece• 3 3/4” Steel Spindle• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Standard Components:• Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door
Extended Components:• Long Single Cylinder Tailpiece• 4 1/2” Steel Spindle• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
Extended Components:• Long Thumbturn Tailpiece• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door
2019_Emtek_MP_Price_Book.indb 56 7/25/18 7:18 PM
Fixed Fixed
Fixed FixedFixedFixed
57emtek.com 800.356.2741
Specification Sheet for Trim and Cylinder Styles DOOR CONFIGURATION #6
2” x 10” Plates, Product Codes 1624, 1644, 1664, 1684, 16B4
1 1⁄2” x 11” Plates, Product Codes 1611, 1631, 1651, 1671, 16A1
1 1⁄2” x 11” Plates, Product Codes 1612, 1632, 1652, 1672, 16A2
1 1⁄2” x 11” Plates, Product Codes 1613, 1633, 1653, 1673, 16A3 2” x 10” Plates, Product Codes 1623, 1643, 1663, 1683, 16B3
1 1⁄2” x 11” Plates, Product Codes 1614, 1634, 1654, 1674, 16A4
2” x 10” Plates, Product Codes 1625, 1645, 1665, 1685, 16B51 1⁄2” x 11” Plates, Product Codes 1615, 1635, 1655, 1675, 16A5
2” x 10” Plates, Product Codes 1622, 1642, 1662, 1682, 16B2
2” x 10” Plates, Product Codes 1621, 1641, 1661, 1681, 16B1
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.Milgard®, Pella®
Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Non-Keyed, Passage (for Semi-Active Door)
Non-Keyed, American Style Thumbturn Inside (for Active Door)
Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Dummy Pair (for Non-Active Door)
2019_Emtek_MP_Price_Book.indb 57 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13/4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #7
American Cylinder Hub Above Handle6” Center-to-Center
ref. Trillenium® (formerly W&F Manufacturing)
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
58 To order: (W) Product Code + Lever Style + Handing + Finish Code
$203.00
Brass Modern2” x 10” KeyedPoseidon Levers
Brass Modern2” x 10” Non-KeyedHercules Levers
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed American Style T-Turn Inside (Patio Function)
Dummy Pair
Non-Keyed American Style T-Turn Inside, Fixed Handles
17B1
17B3
17B5
17B6
BRASS PLATES, MODERN STYLE
See Page 8 for Brass & Modern Brass Lever Options.
Satin Brass (US4)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*
*Unlacquered Brass (US3NL) finish available for a $40 List Price upcharge per item.
2019_Emtek_MP_Price_Book.indb 58 7/25/18 7:18 PM
59emtek.com 800.356.2741
ref. Trillenium® (formerly W&F Manufacturing) DOOR CONFIGURATION #7
Sandcast Rectangular2” x 10” Non-KeyedLariat Levers
Sandcast Rectangular2” x 10” KeyedLariat Levers
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed American Style T-Turn Inside (Patio Function)
Dummy Pair
Non-Keyed American Style T-Turn Inside, Fixed Handles
1761
1763
1765
1766
SANDCAST BRONZE PLATES, RECTANGULAR STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
Stainless Steel2” x 10” KeyedStuttgart Levers
Stainless Steel2” x 10” Non-KeyedHercules Levers
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed American Style T-Turn Inside (Patio Function)
Dummy Pair
Non-Keyed American Style T-Turn Inside, Fixed Handles
17B1
17B3
17B5
17B6
STAINLESS STEEL PLATES, MODERN STYLE
See Page 9 for Stainless Steel Lever Options.
Stainless Steel (SS) $203.00
Sandcast Arched2” x 10” KeyedMontrose Levers
Sandcast Arched2” x 10” Non-KeyedCody Levers
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed American Style T-Turn Inside (Patio Function)
Dummy Pair
Non-Keyed American Style T-Turn Inside, Fixed Handles
1721
1723
1725
1726
SANDCAST BRONZE PLATES, ARCHED STYLE
See Page 9 for Sandcast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
$226.00
2019_Emtek_MP_Price_Book.indb 59 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13/4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #7
American Cylinder Hub Above Handle6” Center-to-Center
ref. Trillenium® (formerly W&F Manufacturing)
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
60 To order: (W) Product Code + Lever Style + Handing + Finish Code
Bronze Tuscany2” x 10” KeyedPadua Levers
Bronze Tuscany2” x 10” Non-KeyedNapoli Levers
METRIC KNOB
TRAIL KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)
Non-Keyed American Style T-Turn Inside (Patio Function)
Dummy Pair
Non-Keyed American Style T-Turn Inside, Fixed Handles
1741
1743
1745
1746
LOST WAX CAST BRONZE PLATES, TUSCANY STYLE
See Page 9 for Lost Wax Cast Bronze Lever Options.
Flat Black Bronze (FB)Medium Bronze (MB)
$226.00
2019_Emtek_MP_Price_Book.indb 60 7/25/18 7:18 PM
61emtek.com 800.356.2741
ref. Trillenium® (formerly W&F Manufacturing) DOOR CONFIGURATION #7
Door Configuration #7 American Cylinder Above Handle 6" Center-to-Center
CONSTRUCTION KEYING
Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.
Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
- Construction devices used on one or more of last four positions.
- Dimples drilled in plug in this position.
• Lost ball system. • Last four pin locations drilled for lost ball application. • Master key pins used for code variability. • Construction keys and owner keys sent separately. • Order by indicating “Construction Keyed, House #_” next to applicable locks.
Steel Spindles(Half-Spindle)
Rosette Screws
Cylinder Tailpiece
Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”
Standard Door Thickness: from 15/8” to 2”
Extended Door Thickness: Over 2” to 23/4”
Extended Door Thickness: Over 2” to 23/4”
Standard Components:• Single Cylinder Tailpiece• 2” Steel Spindles (Half-spindle)• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door
Standard Components:• Thumbturn Tailpiece• 2” Steel Spindles (Half-spindle. No spindle for fixed handles)• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door
Extended Components:• Long Single Cylinder Tailpiece• 2” Steel Spindles (Half-spindle)• 2 1/2” Rosette Screws 2” - 2 1/4” think door• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door
Extended Components:• Long Thumbturn Tailpiece• 2” Steel Spindles (Half-spindle. No spindle for fixed handles)• 2 1/2” Rosette Screws 2” - 2 1/4” think door• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door
2019_Emtek_MP_Price_Book.indb 61 7/25/18 7:18 PM
62 Decorative Multi Point Lock Trim for Swinging Patio Doors
DOOR CONFIGURATION #7 Specification Sheet for Components and Door Thickness
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Trillenium® (formerly W&F Manufacturing)
Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Non-Keyed, American Style T-Turn Inside (Active Door)
Dummy Pair (for Non-Active Door)
Non-Keyed, Fixed Handles, American Style T-Turn Inside (for Semi-Active Door)
2” x 10” Plates, Product Codes 1723, 1743, 1763, 17B3
2” x 10” Plates, Product Codes 1725, 1745, 1765, 17B5
2” x 10” Plates, Product Codes 1726, 1746, 1766, 17B6
2” x 10” Plates, Product Codes 1721, 1741,1761, 17B1
2019_Emtek_MP_Price_Book.indb 62 7/25/18 7:18 PM
63emtek.com 800.356.2741
Handing Required• Key codes may be specified. Fits standard door thickness of 13/4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #8
American Cylinder Hub Above Handle51/4” Center to Center
ref. Neuma Doors®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
METRIC KNOB
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
18A1
18A218A318A4
18B1
18B218B318B4
STAINLESS STEEL PLATES, MODERN STYLE
See Page 9 for Stainless Steel Lever Options.
$203.00
Stainless Steel11⁄2” x 11” Non-KeyedAthena Levers
Stainless Steel2” x 10” KeyedDresden Levers
Stainless Steel (SS)
8 7/8"
5 1/4"
1 5/8"
2019_Emtek_MP_Price_Book.indb 63 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
DOOR CONFIGURATION #8
American Cylinder Hub Above Handle51/4” Center to Center
ref. Neuma Doors®
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
64 To order: (W) Product Code + Lever Style + Handing + Finish Code
8 7/8"
5 1/4"
1 5/8"
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
1851
185218531854
1861
186218631864
SANDCAST BRONZE PLATES, RECTANGULAR STYLE
See Page 9 for Sandcast Bronze Lever Options.
$226.00
Sandcast Rectangular2” x 10” KeyedTeton Levers
Sandcast Rectangular11⁄2” x 11” Non-KeyedLariat Levers
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
2019_Emtek_MP_Price_Book.indb 64 7/25/18 7:18 PM
Handing Required• Key codes may be specified. Fits standard door thickness of 13/4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
Handing Required• Key codes may be specified. Fits standard door thickness of 13/4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.
65emtek.com 800.356.2741
ref. Neuma Door® DOOR CONFIGURATION #8
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
1811
181218131814
1821
182218231824
SANDCAST BRONZE PLATES, ARCHED STYLE
See Page 9 for Sandcast Bronze Lever Options.
$226.00
Sandcast Arched11⁄2” x 11” Non-KeyedCimarron Levers
Sandcast Arched2” x 10” KeyedDurango Levers
Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)
FinishProduct Code Lever Style (LH/RH) List Price
Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside
1831
183218331834
1841
184218431844
LOST WAX CAST BRONZE PLATES, TUSCANY STYLE
See Page 9 for Lost Wax Cast Bronze Lever Options.
$226.00
Bronze Tuscany11⁄2” x 11” Non-KeyedOctagon Levers
Bronze Tuscany2” x 10” KeyedMedici Levers
Flat Black Bronze (FB)Medium Bronze (MB)
2019_Emtek_MP_Price_Book.indb 65 7/25/18 7:18 PM
66 Decorative Multi Point Lock Trim for Swinging Patio Doors
DOOR CONFIGURATION #8 Specification Sheet for Components and Door Thickness
Door Configuration #8 American Cylinder Above Handle 5 1/4” Center to Center
Steel Spindle
Rosette Screws
Cylinder Tailpiece
Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Components:• Single Cylinder Tailpiece• 3 3/4” Steel Spindle• 1 1/2” Rosette Screws
Standard Components:• Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 1 1/2” Rosette Screws
Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in
Standard Door Thickness: 13/4”
Standard Door Thickness: 13/4”
CONSTRUCTION KEYING
Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.
Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
Construction devices used on one or more of last four positions.
Dimples drilled in plug in this position.
• Lost ball system. • Last four pin locations drilled for lost ball application. • Master key pins used for code variability. • Construction keys and owner keys sent separately. • Order by indicating “Construction Keyed, House #_” next to applicable locks.
8 7/8"
5 1/4"
1 5/8"
2019_Emtek_MP_Price_Book.indb 66 7/25/18 7:18 PM
67emtek.com 800.356.2741
Specification Sheet for Trim and Cylinder Styles DOOR CONFIGURATION #8
FixedFixed
Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.
Neuma Doors®
2” x 10” Plates, Product Codes 1822, 1842, 1862, 18B21 1⁄2” x 11” Plates, Product Codes 1812, 1832, 1852, 18A2
Non-Keyed, Passage (for Semi-Active Door)
1 1⁄2” x 11” Plates, Product Codes 1813, 1833, 1853, 18A3 2” x 10” Plates, Product Codes 1823, 1843, 1863, 18B3
Non-Keyed, American Style Thumbturn Inside (for Active Door)
2” x 10” Plates, Product Codes 1824, 1844, 1864, 18B41 1⁄2” x 11” Plates, Product Codes 1814, 1834, 1854, 18A4
Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
2” x 10” Plates, Product Codes 1821, 1841, 1861, 18B11 1⁄2” x 11” Plates, Product Codes 1811, 1831, 1851, 18A1
Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
2019_Emtek_MP_Price_Book.indb 67 7/25/18 7:18 PM
11111112111311141115112111221123112411251131113211331134113511411142114311441145115111521153115411551161116211631164116511711172117311741175118111821183118411851211121212131214121512211222122312241225123112321233123412351241124212431244124512511252
12531254125512611262126312641265127112721273127412751281128212831284128513111312131313141315132113221323132413251331133213331334133513411342134313441345135113521353135413551361136213631364136513711372137313741375138113821383138413851411141214131414
14151421142214231424142514311432143314341435144114421443144414451451145214531454145514611462146314641465147114721473147414751481148214831484148515111512151315141515152115221523152415251531153215331534153515411542154315441545155115521553155415551561
15621563156415651571157215731574157515811582158315841585161116121613161416151621162216231624162516311632163316341635164116421643164416451651165216531654165516611662166316641665167116721673167416751681168216831684168517211723172517261741174317451746
176117631765176618111812181318141821182218231824183118321833183418411842184318441851185218531854186118621863186411A111A211A311A411A511B111B211B311B411B512A112A212A312A412A512B112B212B312B412B513A113A213A313A413A513B113B213B313B413B514A114A214A314A4
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
PAGE PAGE PAGE PAGE PAGE PAGE
PRODUCT INDEX
2424242424242424242425252525252525252525252525252525252525252222222222222222222230303030303030303030313131313131313131313131
3131313131313131282828282828282828283636363636363636363637373737373737373737373737373737373737373434343434343434343442424242
4242424242424343434343434343434343434343434343434343404040404040404040404848484848484848484849494949494949494949494949494949
4949494946464646464646464646545454545454545454545555555555555555555555555555555555555555525252525252525252525959595960606060
5959595965656565656565656565656565656565646464646464646423232323232323232323292929292929292929293535353535353535353541414141
14A514B114B214B314B414B515A115A215A315A415A515B115B215B315B415B516A116A216A316A416A516B116B216B316B416B517B117B317B517B618A118A218A318A418B118B218B318B41LA11LA21LA31LA41LM11LM21LM31LM41LR11LR21LR31LR42LA12LA22LM12LM22LR12LR2
414141414141474747474747474747475353535353535353535358,5958,5958,5958,596363636363636363161616161515151514141414202019191818
2019_Emtek_MP_Price_Book.indb 68 7/25/18 7:18 PM
69
G-U® is a registered trademark of G-U Hardware, Inc. Paddock™ is a registered trademark of Yale® UK. Pella® is a registered trademark of Pella
Corporation. Sierra Pacific Windows® is a registered trademark of Sierra Pacific Industries. Superior® is a registered trademark of Superior
Engineered Products Corporation. Willmar® is a registered trademark of JELD-WEN of Canada Ltd. Andersen® is a registered trademark of
Andersen Corporation. Trillenium® is a registered trademark of Endura Products, Inc. Eagle® is a registered trademark of Eagle Window and
Door, Inc, BiltBest® is a registered trademark of BiltBest Windows and Patio Doors. Ashland® is a registered trademark of Ashland Products,
Inc. Caradco®, JELD-WEN, Norco® and Pozzi® are registered trademarks of JELD-WEN Inc., Oregon, USA. Integrity® and Marvin® are registered
trademarks of Marvin Windows and Doors. Milgard® is a registered trademark of Milgard Windows, Inc. Therma-Tru® is a registered trademark
of Therma-Tru Doors®. HOPPE® is a registered trademark of HOPPE North America, Inc. Hurd® is a registered trademark of Hurd Millwork
Company. Kolbe & Kolbe® is a registered trademark of Kolbe & Kolbe Millwork Company, Inc. Lincoln® is a registered trademark of Lincoln
Wood Products, Inc. Loewen® is a registered trademark of Loewen Windows. PGT® is a registered trademark of PGT Industries. Peachtree® and
Vetter® are registered trademark of The Peachtree Companies, Inc. Semco® is a registered trademark of Semling-Menke Co. Inc. Weathershield®
is a registered trademark of Weathershield Mfg. Inc. KML by Andersen® is a registered trademark of KML by Andersen. Atrium® is a registered
trademark of Atrium. KFV® is a registered trademark of KFV. Simpson® is a registered trademark of Simpson. Signature® is a registered
trademark of Signature. Crestline® is a registered trademark of Crestline. Windsor® is a registered trademark of Windsor. Neuma Doors® is a
registered trademark of Nan Ya Plastics Corporation. With the exception of Paddock™, none of the aforementioned companies are affiliated
with Emtek Products, Inc.
Door Manufacturers listed under each configuration are for reference only and are subject to change. Some retrofitting may be necessary. Please carefully measure and identify your hardware using the diagrams and steps listed on pages 2, 3 and 4.
2019_Emtek_MP_Price_Book.indb 69 7/25/18 7:18 PM
Order Placed By Date
Billing Information
Company Name
Address
City State, Zip
Telephone
Shipping Address
EMTEK Products, Inc. 15250 E Sta�ord Street
City of Industry, CA 91744
Tel: 800-356-2741 626-961-0413
Fax: 800-577-5771 626-336-2812
www.emtek.com
Company Name
Address
City State, Zip
Telephone
QTY Finish PriceConfiguration Product Code Lever Style Handing(LH/RH)
Multi Point Lock Trim Order Form Acct#
PO# Note
Please Fax Order Form to (800) 577-5771or Email to orders@emtek.com
2019_Emtek_MP_Price_Book.indb 70 7/25/18 7:18 PM
Large Multi Point Entry SetsAmerican Cylinder Hub Above/Below Handle, 35⁄8” Center-to-Center
ref. G-U®
Large Multi Point Entry SetsEuro Cylinder Hub Below Handle, 35⁄8” Center-to-Center
ref. G-U®
PAGE
14
18
TABL
E OF C
ONTE
NTS
(92mm)3-5/8”
4-1/2"
4-1/2"
3-5/8”
4-1/2"
4-1/2"
(92mm)
Large Multi Point Entry Sets
3-5/8”
4-1/2"
4-1/2"
(92mm)
Subject to the terms and conditions of this warranty, Emtek Products, Inc. (“Company”) extends a lifetime limited warranty* to the
original consumer user (“Original User”) of our product (“Product”) against defects in material and workmanship, as long as the Original User
occupies the residential premises upon which the Product was originally installed.
*Electronic components warranted TWO (2) YEARS
This warranty only applies to the Original User of the Products. This warranty is not transferable. This warranty applies to all products sold on
or after April 2, 2012.
Original User: The Original User will return the defective Product to the retailer from whom it was purchased, accompanied by a statement
of defects and proof of purchase.
What Emtek will do: Upon return of the defective Product to Emtek for inspection, free and clear of all liens and encumbrances and
accompanied by the statement of defects and proof of purchase, Emtek’s sole obligation, at its option, is to either repair or replace the Product,
or refund the original retailer purchase price in exchange for the Product.
THE COMPANY MAKES NO OTHER WARRANTY OTHER THAN AS EXPRESSLY STATED HEREIN, AND ALL IMPLIED WARRANTIES,
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED.
THE COMPANY’S MAXIMUM LIABILITY HEREUNDER IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. IN NO EVENT SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL OR SPECIAL AND/OR PUNITIVE DAMAGES OF ANY NATURE
ARISING FROM THE SALE OR USE OF THE PRODUCT, WHETHER BASED ON CONTRACT, WARRANTY, TORT, STRICT LIABILITY, PATENT
INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some local laws do not allow the exclusion
or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific
legal rights and a buyer may also have other rights which may vary from state to state.
WHAT IS NOT COVERED: THE FOLLOWING COSTS, EXPENSES AND DAMAGES ARE NOT COVERED BY THE PROVISIONS OF THIS LIMITED
WARRANTY: (I) LABOR COSTS INCLUDING, BUT NOT LIMITED TO, SUCH COSTS AS THE REMOVAL AND RE-INSTALLATION OF PRODUCT; AND (II)
SHIPPING AND FREIGHT EXPENSES REQUIRED TO RETURN PRODUCT TO EMTEK.
THE PROVISIONS OF THIS WARRANTY DO NOT APPLY TO PRODUCTS: (I) USED IN COMMERCIAL APPLICATIONS; (II) USED IN COMMON AREA
APPLICATIONS; (III) USED FOR PURPOSES FOR WHICH THEY ARE NOT DESIGNED OR INTENDED; (IV) WHICH HAVE BEEN SUBJECTED TO
ALTERATION, ABUSE, MISUSE, NEGLIGENCE OR ACCIDENT; (V) WHICH HAVE BEEN IMPROPERLY STORED, INSTALLED, MAINTAINED OR OPERATED;
(VI) WHICH HAVE BEEN USED IN VIOLATION OF WRITTEN INSTRUCTIONS PROVIDED BY EMTEK; (VII) WHICH HAVE BEEN SUBJECTED TO
IMPROPER TEMPERATURE, HUMIDITY OR OTHER ENVIRONMENTAL CONDITIONS; OR (VIII) WHICH, BASED ON EMTEK’S EXAMINATION, DO NOT
DISCLOSE TO EMTEK’S SATISFACTION NON-CONFORMANCE TO THE WARRANTY. Additionally, this warranty DOES NOT COVER scratches,
abrasions, or deterioration due to the use of paints, solvents or other chemicals.
Finish Warranty: Polished Brass-Lifetime and Polished Nickel-Lifetime finishes carry a lifetime limited finish warranty. There is no finish
warranty on Deep Burgundy, Flat Black Patina, Medium Bronze Patina, Polished White Bronze, Rust, Silver Patina, Tumbled White Bronze, and
Unlacquered Brass finishes. All other finishes carry a five year finish warranty.
Warranty claims: Please contact the retailer from whom the defective product was purchased. If assistance is needed, please contact Emtek
Customer Service at:
EMTEK Products, Inc.
15250 E. Stafford Street
City of Industry, CA 91744
Tel: (626) 961-0413
LIFETIME LIMITED WARRANTY
152854_JamesLItho_Cover.indd 2 7/26/18 2:04 PM
ASSA ABLOY, the global leader in door opening solutions
MULTI POINT LOCK TRIMPRICE BOOKOctober 2018
BX4-3PTPRICEBK2019OCTOBER 2018
EMTEK Products, Inc.15250 E. Stafford Street
City of Industry • CA 91744Tel: 800-356-2741 • 626-961-0413Fax: 800-577-5771 • 626-336-2812
emtek.com
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience
2019_Emtek_Multi_Point_Price_Book_Cover_ps_072718.indd 1-2 7/27/18 10:04 AM