Post on 02-Jan-2017
transcript
NEWproaucts
control, as well as adjustable andlockable flow control.
The model 775 valve is recommended for use with a variety of different low-to-high viscosity materialsincluding adhesives, solvents, oils,grease, sealants, plastisols, oils,RTVs, pastes, gels, and acids. Thisvalve can be used with a number ofdifferent components to make thefluid dispensing process faster andmore efficient. Tridak can also modify this valve to meet a company'sspecific requirements. For moreinformation, call (860) 626-6700,e-mail info@tridak.com. or visitwww.tridak.com.
Circle 412 on reader service card
GAS-HEATED CABINET OVENGrieve Corp. offers No. 887, a gasfired 1,000°F cabinet oven for curingmetal coatings onto parts. The unit'sworkspace dimensions measure38"W x 38"0 x 38"H. A 175,000BTUjhr installed modulating natural gas burner provides heat, while a2,000-CFM, 2-HP stainless steelrecirculating blower furnishes a hori-
zontal airflow across the workload.This cabinet oven features an alu
minized steel exterior, Type 304, 2Bfinish stainless steel interior, plusinner and outer door gaskets thatseal against the door plug and thefront face of the oven. No. 887 has 8"thick insulated oven walls, consistingof 2" of 1,900°F block and 6" of 10lbjcfdensity rockwool insulation. Allsafety equipment is onboard asrequired by IRI, FM, and NFPA
www.metalfini5hing.com
Standard 86 for gas-heated equipment, including a 32S-CFM, 'j3-HPpowered forced exhauster. A digitalindicating temperature controller isalso provided. For more information,call (847) 546-8225 or visitwww.gnevecorp.com.
Circle 413 on reader service card
NEW CATALOG FORTESTING EQUIPMENTBYK-Gardner, a worldwide leader inpaint, coatings, and plastics testingequipment, is pleased to announcethe release of its new 2009 Catalog.
CBYK..."_.....1 ',",,0.....""""11'1_ ...... _
2009
With more than 350 pages of testingequipment and supplies, and hundreds ofnew products, users can findvirtually everything they need to outfit their entire laboratory. The newcatalog features many new andredesigned products, including:
• Hundreds of the products that youuse every day, such as drawdownbars and drawdown charts, havebeen redesigned to improve quality.
• Lowerprices on many items toensure the best value on the market.
• The new Spectro-Guide S-theonly color spectrophotometerspecifically designed to meet theexacting requirements of theautomotive industry for simultaneous interior color and glossmeasurement.
• A complete selection of bykochart drawdown charts, the highest-quality drawdown chartsavailable today, at the most competitive price.
• Attractive trade-in values whenyou trade an old gloss or colorinstrument for a new BYK-Gardnermicro-gloss or spectro-guide.
• The BYK-MAC-the first combination color and appearance instrument that quantifies color as wellas effect pigments and appearancephenomena.
To receive a copy of our new catalogfree of charge, call (800) 343-7721 orvisit the company's website atwww.byk.comjinstruments andcomplete the catalog request form.
Circle 414 on reader service card
ALUMINUM BUYER'S GUIDEThe Aluminum Association hasreleased The Aluminum Now 2009Buyer's Guide, an all-in-one reference tool for anyone who does business in the North American aluminum industry. Completely updated for 2009, the sixth annualAluminum Now Buyer'sGuide includessales contacts, addresses, and company information on:
• Nearly 150 primary ingot, recycled ingot, and master alloy manufacturers
• More than 200 extruders• 125 companies specializing in
drawing stock, bare wire , pigments and powder, forgings andimpacts, ACSR and bare cable, andinsulated/covered wire and cable
• Nearly 200 non-ferrous castingfoundries
• 100 aluminum distributors; and• More than 350 suppliers to the
industry-ranging from coilcoaters to lubricant manufacturersto makers of protective apparel
The price of the Guide is $25 formembers of The AluminumAssociation and $40 for non-members, plus shipping and handling.For more information, or to order,visit www.aluminum.orgfbookstore.
Circle 415 on reader service card
March 2009 I metalfinishing I 59