Post on 16-Oct-2020
transcript
E
Customer Service (570) 497-5477 - Fax (888) 388-6017 - www.solarissteam.com
ELECTRIC COUNTER TILTING ROUND SKILLET
SPECIFICATIONS:
electrically heated counter tilting skillet, C-CSA-US certifiedand NSF listed. The skillet shall be of one piece covedcorner, 10 gauge stainless steel with a #4 exterior finish anda polished interior. The pan sides shall slope outward tofacilitate access to the cooking surface. Cooking surfaceshall be 3/8" (9.5mm) thick stainless steel clad plate, fittedwith clamped on electric heating elements rated at 7.5 kWfor even heat transfer over entire cooking surface. Pan shallbe fitted with side pivots mounted in sealed stainless steelclad consoles mounted on a 10 gauge stainless steel basewith #4 finish. Pan shall be fitted with a stainless steel tilthandle with heat resistant knob for tilting the pan forward forcomplete removal of contents with provisions for mountingon left or right sides.
Controls shall be integrally mounted and shall include apower switch, pilot light, thermostat, and high temperaturecut-off.
The skillet shall operate in a temperature range of 160°F to445°F (71°C to 230°C).
The skillet can be mounted on an optional 30" (762 mm) wide stainless steel stand.
ModelCapacities
kW Gal. litres
ECTRS-16 7.5 16 61
OPERATION SHALL BE BY:
Electric heating elements equipped for operation on:
208 VAC, 1 phase, 50/60 Hz208 VAC, 3 phase, 50/60 Hz220 VAC, 1 phase, 50/60 Hz220 VAC, 3 phase, 50/60 Hz240 VAC, 1 phase, 50/60 Hz380/220 VAC, 3 phase, 4 wire, 50/60 Hz415/240 VAC, 3 phase, 4 wire, 50/60 Hz
OPTIONAL ITEMS AT EXTRA COST:
380 VAC, 3 phase, 50/60 Hz415 VAC, 3 phase, 50/60 Hz480 VAC, 3 phase, 50/60 Hz600 VAC, 3 phase, 50/60 HzEtched gallon markings (GMS-16).Etched litre markings (LMS-61).Correctional package.
ACCESSORIES:
Steam pan insert (SPI-16).One piece lift-off stainless steel cover (SC-16).21" (460mm) high floor stand c/w sliding shelf (S-30).21" (460mm) high floor stand c/w sliding drain pan andstationary drain (SD-30).Single pantry faucet with 12" swing spout (SF-12).Double pantry faucet with 12" swing spout (DF-12).Single pantry faucet & bracket with 60" pot filler (SF-60).Double pantry faucet & bracket with 60" pot filler (DF-60).
Shall be a Solaris Model ECTRS-16,
Project ID#:
REV 5/08
DETAILS AND DIMENSIONS
As continued product improvement is a policy of Solaris, specifications are subject to change without notice.
FRONT OF APPLIANCE
MOUNTING PATTERN
SHOWN WITH OPTIONAL SD-30 STAND & DF-12 FAUCET.
2 EQUALLY SPACED
ON 2.25"[57mm] B.C.
REAR FLANGED FOOT DETAIL
Ø7/16" [11mm] HOLES
SHIPPING WT.
0
0
MIN. CLEARANCE
BACK
SIDES
ELECTRICAL CHARACTERISTICS
MODEL PHASE
ECTRS-1631 36.0
20.8 19.734.1
208V 220V
3160R5
9.018.131.3
11.4 10.4
240V 380V 415V 480V
ELECTRICAL CONNECTION: to be specified on data plate. -
SERVICE CONNECTIONS
DRAIN: 1 1/2"- 11 1/2 NPTD -
3.88 [98]D
6.38
[162
]
12.7
5 [3
24]
21 [5
33]
29 [7
37]
10.5
[267
]
20.5
[521
]
Ø26 [660] ID
12.8
8 [3
27]
22.8
8 [5
81]
D
POUR PATH16 [406]
8.75
[222
] ID
43.2
5 [1
099]
IN [mm]
38.7
5 [9
84]
59.2
5 [1
505]
9 [229]
7.5
kW AMPS PER LINE
1.25
[32]
12.5
0 [3
18]
29.25 [743]
N/A N/A N/A
10 [2
54]
2.25 [57]
14.50 [368]
14.63 [371]
29.25 [743]
7.25 [183]
3.63 [92]
4X WELD NUTS5/16-18 UNC
12.5600V
7.2
220 lbs. [100 kg]
HOT WATER: 3/8" O.D. tubing to faucet (OPTIONAL)
COLD WATER: 3/8" O.D. tubing to faucet (OPTIONAL)
H
C -
-
1.38
[36]
HC
OPTIONAL FAUCET
3.13 [79]