New Method Steel Stamps, Inc. is the world leader in

manufacturing Automatic Roll Marking Attachments for OD and

End Face marking

The Best Way to Mark

• All New Method automatic roll marking attachments, whether designed for use in OD or END-FACE marking, eliminate secondary marking operations, for they are engineered to work as an integral part of the machine - advancing, marking the part and clearing it during the machine cycle. Avoid extra tooling and setup time as well as production time.

• Secondary marking operations of parts are costly.

• The most economical and efficient way to identify products is to do it prior to, or during the manufacturing cycle automatically, making it a primary operation.

Automatic AttachmentsPART BREAKDOWN AVAILABLE UPON REQUEST

CNC Turning Centers

Available in Outside Die Mount or Throated Die Mount

End Face Marking Tools

Automatic AttachmentsPART BREAKDOWN AVAILABLE UPON REQUEST

National Acme Tooling

604-1

620

705

New Britain Tooling

602-1

Automatic Attachments PART BREAKDOWN AVAILABLE UPON REQUEST

Greenlee Tooling Tooling for Swiss

Machines (including Citizen, Nakamora, Schutte,

Star and Tornos) are available.

New Method also makes Custom Tooling upon

request.

541 Interchangeable Type Retainer

Used on all Roll Marking Attachments that use the following Power Paks: 550, 560, 570, 580, 583, 588

541 Retainer accepts the following type sizes: 1/16", 3/64", 3/32", 1/8", 5/32", 5/64", 3/16"

For characters to be top-to-collet use 1035 as starting cam. For bottom-to-collet use 1034 as starting cam.

Note: The starting cam must use the dowel pins supplied. Failure to do so will result in damage to the type.

544 Interchangeable Type Retainer

Used on all Roll Marking Attachments that use the following Power Paks: 571, 578, 584, 585.

The 544 Interchangeable Type Retainer accepts the following type sizes: 3/64", 1/16", 5/64", 3/32", 1/8".

Roll Die Order Worksheet

Roll Marking Die Samples

Bar stock marking means marking the full bar length of hex, round or square stock before machining parts from the bar in a Screw Machine or Turning Center. Typical parts include fittings, spud orifices, and flow controllers. Bars can be marked on 1,2,3,4,5, or 6 sides either while being straightened or from coil or after cutting to bar lengths.

Bar Marking Machines

6000 Bar Marking Machine• Manual load, with auto feed at 2-feet per second• Handles Hex & Square stock from ½ to 2 in.• Interchangeable Bar Marking Dies made to your

specification• Adjustable marking depths• Eliminates wasted floor space

New Method Bar Marking Model 6400

Secondary Marking Machines

Custom Marking Machines

Pneumatic & Manual Marking Presses

Manual Marking Options

Contact Information

Charles D. L. BrownPresident

Email – cb@newmethod.com

Quotes, sales, customer service, technical issues

Kellee M. WarrenOffice Manager

Email – kw@newmethod.com

Quotes, sales, billing inquires

Office Phone +1 (586) 293-0200

Toll Free +1 (800)-582-0199Office Fax +1 (586) 296-1900

Website – www.newmethod.com

Mailing Address:

P.O. Box 338

Fraser, MI 48026

Physical Address:

31313 Kendall

Fraser, MI 48026

Located approximately 10 miles north of Detroit, Michigan