Post on 24-Mar-2018
transcript
New Pellet Plant Lighting Design DAGR was tasked with providing the lighting design and fixtures for a new pellet plant including all interior and exterior areas. Due to local bylaws, no spill light was allowed beyond the North, East and West property lines, requiring careful optic selection, and positioning and angling of fixtures. Below is an overall render of the outside areas of the site and one of the inside of the pellet building. On the following page is the top-‐down view with pseudo-‐colour where red represented the required illumination level. All light levels were specified such that they’d meet the requirement at end-‐of-‐life fixture output levels.