Post on 30-Mar-2018
transcript
www.qrayled.com
LED Street Lighting(Public Lighting)
Long lasting, No mercury, No UV.Environmental Friendly
Energy Saving50%
Up to
The ideal replacement for High Pressure Sodium Vapor (HPSV) and Metal Halide (MH) public lighting. Guarantees sustainable high performance, saves electricity and maintenance - a perfect investment!LED STREET LIGHTING
Q-RAY™ have developed the optimum thermal management concept with optimum vertical fin spacing which work better as they follow the natural direction of the buoyant flow. This optimized design of heat exchange surface with the exterior ensures proper heat dissipation. Furthermore, Q-RAY™ LED street light body is constructed using rugged alloy material which demonstrates the ability to sink heat faster and more efficiently.
ADVANCED THERMAL MANAGEMENT
With millions of street lighting installed base around the world to date, the Q-RAY™ LED Street Lighting embodies the following design concepts:
Direct retrofit - the Q-RAY™ lanterns can directly replace existing installations without the need to change the pole height, spacing or arrangement, while meeting all required application standards. This approach ensures lowest capital cost for replacing existing conventional street lights.
Ease of maintenance - serviceable parts are easily accessed in one simple step making normal maintenance procedure a breeze. This approach ensures maintenance efforts and cost of ownership are further minimized.
DESIGN CONCEPT
Fixture is made of rugged metal, with integrated & weatherproof electronic built-in. Solid mounting & interlocking system is used to replace existing lantern without any re-engineering work required.
Combined with its elegant, slim and futuristic design, this is one lantern which definitely deserves a second glance. In addition to that, Q-RAY™ advanced thermal management system design ensures proper heat dissipation.
BODY & MATERIAL CONSTRUCTION - LUMINAIRE’S CONSTRUCTIONS
Power factor 0.8Driver efficiency 80%Theoretical LED power 50WTotal power consumption 50/(0.8x0.8) = 78.2VA
0.9595%50W
50/(0.95x0.95) = 55.4VA
Parameter Scenario 1 - Most LED street lights Scenario 2 - Q-RAY™ Street Light
Modular design accommodates different lighting requirements. The most commonly asked for versions include the 100W, 150W, 250W and 400W HPSV replacement, Q-RAY™ LED street light addressed these models. All these models come with either warm white light, or neutral moonlight. Besides the modular design, it is equipped with high power factor technology which provides better energy savings than most LED street lights available in the market. For any LED products to give optimal energy-savings, it is essential that all power devices within the LED-based products are efficient. With higher power factor and 90% driver efficiency, Q-RAY™ LED street light gives optimum power savings. This explained in the following scenarios:
INTELLIGENT ELECTRICAL SYSTEM
Q-RAY™ LED street lighting has a specially designed optical system that provides more uniform light distribution on the road surface by using unique lenses. This new range is characterized by its flexible photometric performance associated with an almost unlimited choice of photometric distributions.
OPTICAL PROPERTIES - UNIQUE LENSES DESIGN AND FLEXIBILITY
KEY ADVANTAGES Of USING Q-RAY™
Long life time up to 50,000 hoursLower energy consumptionHigh colour rendering index (CRI)Up to 50% energy savingsLimited maintenanceReduce carbon footprintNo heat or UV in the light beam
No toxic vapor such as mercurySmall sources and design flexibilityHigh efficiency of colour applicationDirectional lighting for high system efficiencyInstantaneous illuminationOperating at low temperatureDurable and long lasting
LUMINAIRE’S CHARACTERISTICS
Q-RAY™ LED street lighting are equipped with a mounting kit for horizontal mounting. As an option, an adjustable inclination can be supplied to facilitate photometric adjustments on site. The possible pole diameter on the mounting ranges from 50mm to 60mm.
MOUNTING
Standard horizontal position with optional inclination.
Degree of protection- Optical compartment:- Electronic compartment:Impact resistance:Rated voltage: (Typical)Electrical class:Installation height:Weight:
Driver/Power supply:(Integrated)(*) according to IEC standard – EN 60598(**) according to IEC standard – EN 62262
IP66 (*)IP66 (*)IK08 (**)240V, 50HzI6-15m10.5 kg10.5 kg14 kg17.5 kg
StreetLED S100StreetLED S150StreetLED S250StreetLED S400
StreetLED S250 StreetLED S400StreetLED S100/StreetLED S150
LUMINAIRE’S DIMENSION
ø 50 - 60 mm
ø 50 - 60 mm
ø 50 - 60 mm
686 mm
380 mm
161 mm
StreetLEDS100
686 mm
380 mm
161 mm
StreetLEDS150
886 mm
380 mm
161 mm
StreetLEDS250
1086 mm
380 mm
161 mm
StreetLEDS400
L
W
H
380
686
161 380
886
161 161
1086
380
Q-RAY™ LED street light is suitable for outdoor applications such as highway lighting, urban lighting, residential area, car park, compound lighting and general illuminations. Q-RAY™ LED street lighting offer two different photometric design to facilitate various applications.
StreetLED S250/S400 Series are designed with a better lighting performance to reach required levels while complying with international standards and StreetLED S100/S150 Series are designed to maximize the energy savings. This flexibility allows for use in any street lighting and compound lighting application.
APPLICATIONS
REMOTE MANAGEMENT FOR MAXIMUM CONTROL AND MOTION DETECTION (OPTIONAL)
Q-RAY™ LED street lighting also can include the remote management system. This open-source bidirectional communication system is based on the principle of radio frequency (ZigBee protocol). A motion and presence detection system can be an additional effective tool for more rationalized use of energy.
LUMINAIRE’S PHOTOMETRY
Maximum number of LEDs 48 LEDs
Rated System Power 60W
Correlated Colour Temperature
122lm/LEDMinimum Luminous flux type at 350mA
Typical Lumen output 6,200
StreetLED S100 StreetLED S150 StreetLED S250 StreetLED S400
48 LEDs
85W
122lm/LED
8,700
96 LEDs
170W
122lm/LED
18,000
144 LEDs
260W
Warm white (3000K), Neutral white (4500K)
122lm/LED
27,300
Pilot LED Street Lights implemented byHang Tuah Jaya Municipal of Malacca.
1st LED Street Lights implemented byCity Hall of Kuala Lumpur atTaman Tasik Perdana.
1st LED Street Lights implemented by aMalaysian Government Agency(Malaysian Highway Authority).
Ladybrand & Bloemfontein MunicipalitySouth Africa.
Polar Diagram
Utilization Factor Curve
StreetLED S10090
C90/270C0/180
60
30-300
-60
-90
120-120
150-150
5790
3474
4632
1158
2316
2 1 0 1 2 3 4
STREET SIDEHOUSE SIDE
0
20
40
60
80
100
Polar Diagram
Utilization Factor Curve
StreetLED S150
90
C90/270C0/180
60
30-300
-60
-90
120-120
150-150
5790
3474
4632
1158
2316
2 1 0 1 2 3 4
STREET SIDEHOUSE SIDE
0
20
40
60
80
100
Polar Diagram
Utilization Factor Curve
StreetLED S25090
C90/270C0/180
60
30-300
-60
-90
120-120
150-150
11772
7063
9418
2354
4709
2 1 0 1 2 3 4
STREET SIDEHOUSE SIDE
0
20
40
60
80
100
Polar Diagram
Utilization Factor Curve
2 1 0 1 2 3 4
STREET SIDEHOUSE SIDE
0
20
40
60
80
100
StreetLED S40090-90
C90/270C0/180
60
30-300
-60
120-120
150-150
3359
16796
6718
10078
13437
©2014 ITRAMASAll rights reserved. Reproduction in whole or in part is strictly prohibited without the prior written consent of ItraMAS. The content in this document serves as informational purpose only and does not form part of any quotation or contract. All information is believed to be accurate and may be changed without prior notice. No liability will be accepted by the publisher or ItraMAS for any consequence of its use. The compilation (meaning the collection, arrangement and assembly) of all content on this document is also the exclusive property of ItraMAS and/or its respective owners and protected by copyright laws.
0814
TECHNICAL SPECIFICATION
StreetLED S100
QPL100-RWB-WARM 60
QPL100-RWB-NEUTRAL
Wattage (W)Product description(Part number)
Comparableconventionalwattage (W)
Lumenoutput lm)
Efficacy(lm/W)
100 6,100 102
Colourtemperature
(CCT)
3000K
Colourrendering
index (CRI)
>75
60 100 6,200 103 4500K >75
StreetLED S150
QPL150-RWB-WARM 85
QPL150-RWB-NEUTRAL
150 8,600 102 3000K >75
85 150 8,700 103 4500K >75
StreetLED S250
QPL250-RWB-WARM 170
QPL250-RWB-NEUTRAL
250 17,800 104 3000K >75
170 250 18,000 105 4500K >75
StreetLED S400
QPL400-RWB-WARM 260
QPL400-RWB-NEUTRAL
400 27,000 104 3000K >75
260 400 27,300 105 4500K >75
# All value stated is Typical rated value.# 3000K (warm white), 4500K (neutral white) B - Integrated driver
Note: While every effort has been made to ensure that the information contained herein is correct at the time of publication, specifications may change without prior notice.
Ordering Information
Manufacturing Part NumberQPL-100A1-RW2-30RSVB-BQPL-100A1-RW2-45RSVB-B
QPL-250D1-RW2-30RSVB-BQPL-250D1-RW2-45RSVB-B
QPL-150C1-RW2-30RSVB-BQPL-150C1-RW2-45RSVB-B
QPL-400E1-RW2-30RSVB-BQPL-400E1-RW2-45RSVB-B