NEXA AUTOCOLOR Car Repair Process for Plastics · Car Parts & Substrate Preparation Primer Topcoat...

Post on 13-May-2018

222 views 3 download

transcript

Car Parts & Substrate Preparation Primer Topcoat

P273-1333Cleaner for Plastics

Clean and scuff. Wash off thoroughly with clean water and dry.

NEXA AUTOCOLOR® Car Repair Process for Plastics

W: www.nexaautocolor.com T: +44 (0)1449 771771 E: ukenquiries@ppg.com Nexa Autocolor and design, Aquabase and 2K are registered trademarks of PPG Industries Ohio, Inc. © 2015 PPG Industries, all rights reserved.

Car Parts & Substrate Preparation Undercoat Topcoat

New Plastics

New car parts supplied in Primer

Bumper e.g. PP / TPO / PP-EPDM

Wheel trim e.g. PA / LEXAN

Wing mirror e.g. ABS / NORYL / PC-PBT

Spoiler e.g. PURGlass Reinforced Substratese.g. SMC

P273-1333Cleaner for Plastics

Clean and scuff. Wash off thoroughly with clean water and dry.

P273-1050Anti-Static Wipe

Anti-Static Agent.Wipe on and wipe off.

Abrade gently with a grey scotch pad and wipe with Waterborne Pre-Cleaner (Anti-Static Wipe will remove many OE plastic primers)

P572-2001Adhesion Promoter for Plastics

Plastic Adhesion Promoter

P565-5601 / 5 / 7Self Levelling Primer

Wet-on-Wet

P572-2001 or P572-2000 AerosolAdhesion Promoter for Plastics

P565-3030 / 31Wet-on-Wet Primer

P471-xxxxUHS Direct Gloss

P989-xxxxAQUABASE® Plus

Colour Clearcoat

P190-6659HS Plus Express Clearcoat

P190-6690HS Plus Clearcoat

Repair Plastics

All car parts except 1K PUR e.g. PP / TPO / PP-EPDM / ABS / NORYL / PC-PBT / SMC / LEXAN / PA

P273-1050Anti-Static Wipe

Anti-Static Agent.Wipe on and wipe off.

P572-2001 or P572-2000 Aerosol Adhesion Promoter for Plastics

Optional Phase Apply a Highbuild Primer Surfacer and flexibilise if required

P565-5301 / 5 / 7Sand with P320Sand with P500Wipe with Waterborne Pre-cleaner

P989-xxxxAquabase Plus

P471-xxxxUHS Direct Gloss

P190-6659 HS Plus Express Clearcoat

P190-6690HS Plus Clearcoat

Mix: 1 : 1 with water Ready for use Mix: 5 : 1 : 1.2Hardener: 8430Thinner: 1692/3/4

Mix: 2 : 1 : 0.5Hardener: 8430Thinner: 1690

Ready for use

Ready for useLEXAN does not require an adhesion promoter

Mix: 2 : 1 : 0.6Hardeners: 870/2/5Thinner: 1863/4

Mix: 3 : 1 : 0.6Hardeners: 870/2/5Thinners: 1693/1694/1689

Existing external mix70 parts colour30 parts 113515 parts 911510-20 parts 5000

TDS

L0700V

Mix TDS

L0700V

Ready for use TDS

H4820V

Mix

TDS

H5930V

Mix

TDS

L0800V

Ready for use

TDS

L0800V

Ready for use

TDS

I1540V

Mix TDS

J2570V

Mix

TDS

I0660V

Mix TDS

J2070V

Mix

Mix: 3 : 1 : 0.6Hardeners: 870/2/5Thinners: 1693/4

TDS

H5630V

Mix

Mix: 5 : 1 : 0.75Hardeners: 8430/842Thinner: 1863/4

Clean & Scuff Anti-Static Wipe

Plastic Adhesion Promoter Primer Surfacer Colour ClearcoatClean & Scuff Anti-Static Wipe

Ready for use

TDS

L0700V

Ready for use

Mix: 1 : 1 with water

TDS

L0700V

Mix

Ready for use

TDS

L0800V

Ready for use

Existing external mix70 parts colour30 parts 113515 parts 911510-20 parts 5000

TDS

I0660V

Mix

Mix: 2 : 1 : 0.6Hardeners: 870/2/5Thinner: 1863/4

TDS

I1540V

Mix TDS

J2070V

Mix

Mix: 3 : 1 : 0.6Hardeners: 870/2/5Thinners: 1693/4

Mix: 3 : 1 : 0.6Hardeners: 870/2/5Thinners: 1693/1694/1689

TDS

J2570V

Mix