Post on 27-Jun-2020
transcript
Occupancy and Vacancy Sensors
2
Diversa® PIR Sensors
Features• Perfect for applications calling for PIR only
sensors• Pre-configured at factory for “wire and it works”
installation• Onboard switches and dials for easy
configuration changes• Tilting lens on WOR series for directing sensors
to, or away from, particular areas• Vandal resistant lens on WOS series• Sensor link to network up to 8 sensors for master/
slave control in one area
Options include:• Photo sensor for natural daylight harvesting• 0-10v dimming for closed loop control• Auxiliary relay for controlling devices such as
HVAC or security systems• Can be ordered in white, ivory, grey, black
WOR Series
WOS Seriesfaceplate sold separately
PIR sensors are the right choice for spaces with a high level of occupant movement and a clean line of sight to the sensor.
Part Number: WIR-3110
California
Compliant24TITLE
- - -
- -
- -
- - -
- - - - - - - - - - - - - - -
ASHRAE 90.1-2010
3
Features:• Dual technology sensors for accurate occupancy
detection• Highly configurable for site specific requirements• Configured with on-board switches and dials or
with our handheld Infrared Setting Unit for ease and reduction of ladder time
• Tilting lens on WOR series and a ball/socket on WOW series provide adjustments for directing sensors to, or away from, particular areas
• Vandal resistant lens on WOS series • Sensor link to network up to 8 sensors for master/
slave control in one area
Options include:• Photo sensor for natural daylight harvesting• 0-10v dimming for closed loop control• Auxiliary relay for controlling devices such
as HVAC or security systems
Diversa® Dual Technology Sensors
Diversa Dual Technology sensors are easy to install and use while still being highly configurable for specific requirements and locations. Combining proprietary ADI-Voice technology with industry standard PIR sensing minimizes energy consumption and provides very accurate occupancy detection when compared to ultrasonic/PIR sensors.
Infrared Setting Unit
WOS SeriesFaceplate sold separately
WOW Series
WOR Series
California
Compliant24TITLE
- - -
- -
- -
- - -
- - - - - - - - - - - - - - -
ASHRAE 90.1-2010
4
OccupancyVacancyLensSingle Tech PIRDual Tech (PIR & ADI-Voice)24Vac (low voltage)120/277Vac347Vac1-pole2-poleDimmingPhoto SensorAuxiliary Relay
Additional Feature
X
Low
Tem
p
X
S
S
S
X
S
S
X
S
X
L
ow Te
mp
S
S
X
B
S
X
Low
Tem
p
X
S
Low
Tem
p
S
S
S
B
Low
Tem
p
X
Low
Tem
p
S
Low
Tem
p
X
S
OccupancyVacancyLensSingle Tech PIRDual Tech (PIR & ADI-Voice)24Vac (low voltage)120/277Vac347Vac1-pole2-poleDimmingPhoto SensorAuxiliary Relay
C
C
C
PART NUMBER
PART NUMBER
WOR SERIES Recessed Ceiling Sensors
WOW SERIES Corner Mount Sensors WOW SERIES Lens Range and Coverage patterns
WORSID1-N-N
WOWCDD2-DPR-N
WOWCDD2-R-N
WOWLDD2-R
-N
WORXID1-N-N
WORSID2-DPR-L
WORXID2-DPR-L
WORBID2-DPR-L
WORSDD1-R-N
WORSDD2-N-N
WORSDD2-R-N
WORSDD2-DPR-L
WORXDD2-PR-N
WORXDD2-DPR-L
WORSIU2-P-N
WORXIU2-P-N
WORSDU1-P-N
WORSDU2-P-N
WORXDU2-P-L
WORSI32-P-N
WVRSDD1-R-N
WORXI32-P-N
WVRSDD2-N-N
WORSD31-P-N
WVRSDD2-R-N
WORSD32-P-N
WVRXDD2-PR-N
WORXD32-P-N
WVRXDD2-DPR-L
WORBIU2-P-N
Specifications
S = StandardX = Extended rangeB = High Bay
C = CornerL = Large Area
LENS OPTIONS
Inputs: 24Vac, Class 2 Low Voltage Source, 60HzOutputs: Diode Pulse, 0-10V Dimming, Auxiliary RelayPower Consumption: 9.5mA Standard, 14.0mA with Auxiliary Relay
LOW VOLTAGE
14 ft
0 ft
0’10’ 10’16’ 16’34’ 34’60’ 60’
10’ 16’ 34’ 60’
130oTop View
Side View14 ft
0 ft
0’ 8’ 8’ 17’ 17’ 35’ 35’ 70’ 70’
8’ 17’ 35’ 70’
Top View
Side View
90o
Corner & Large Area Lens
Top View
Side View
Top View
Side View14 ft
0 ft
0’10’ 10’16’ 16’34’ 34’60’ 60’
10’ 16’ 34’ 60’
130oTop View
Side View14 ft
0 ft
0’ 8’ 8’ 17’ 17’ 35’ 35’ 70’ 70’
8’ 17’ 35’ 70’
Top View
Side View
90o
Power: 120/277Vac or 347Vac, 60HzContact Rating: 120Vac, 800W; 277Vac, 1200W; 347Vac, 1500WPower Consumption: 5.7 mACertification: Certified to applicable UL & CSA standards
LINE VOLTAGEInputs: 24Vac, Class 2 Low Voltage Source, 60HzOutputs: Diode Pulse, 0-10V Dimming, Auxiliary RelayCurrent Draw: 9.5 mA Standard, 14.0 mA with Auxiliary Relay
LOW VOLTAGE
5
OccupancyVacancyLensSingle Tech PIRDual Tech (PIR & ADI-Voice)24Vac (low voltage)120/277Vac347Vac1-pole2-poleDimmingPhoto SensorAuxiliary Relay
Additional Feature
S
Whi
te
S
Whi
te
S
Whi
te
S
Whi
te
S
Gre
y
S
Ivor
y
S
Whi
te
S
Whi
te
S
Whi
te
S
Whi
te
S
W
hite
S
W
hite
S
Ivor
y
S
Gre
y
S
Ivor
y
S
Gre
y
S
Whi
te
S
Whi
te
S
Whi
te
S
Whi
te
S
Whi
te
S
Whi
te
S
Grey
S
Ivor
y
S
Whi
te
S
Whi
te
PART NUMBER
WOR SERIES Lens Range and Coverage patterns WOS SERIES Lens Range and Coverage patterns
WOS SERIES Wall Switch Sensors
WOSSID1-P-VW
WOSSID2-DP-VW
WOSSID2-DP-VI
WOSSID2-DP-VG
WOSSDD2-P-VW
WOSSDD2-DPR-VW
WOSSIU1-N-VW
WOSSIU2-P-VW
WVSSIU1-N-VW
WVSSIU2-P-VW
WOSSIU2-P-VG
WOSSIU2-P-VI
WVSSIU2-P-VI
WOSSDU1-P-VW
WOSSDU2-P-VW
WVSSDU1-P-VW
WVSSDU2-P-VW
WOSSD31-P-VW
WOSSI31-N-VW
WOSSD32-P-VW
WOSSI32-P-VW
WVSSD31-P-VW
WOSSI32-P-VI
WVSSD32-P-VW
WOSSI32-P-VG
WVSSIU2-P-VG
Specifications
Power: 120/277Vac or 347Vac, 60Hz Contact Rating: 120Vac, 800W; 277Vac, 1200W; 347Vac, 1500WPower Consumption: 0.4 mACertification: Certified to applicable UL & CSA standards
LINE VOLTAGEInputs: 24Vac, Class 2 Low Voltage Source, 60HzOutputs: Diode Pulse, 0-10V Dimming, Auxiliary RelayPower Consumption: 9.5mA Standard, 14.0mA with Auxiliary Relay
LOW VOLTAGE
15 ft
7.5 ft
0 ft
7.5 ft
15 ft
180˚
15˚
15˚
4 ft
0 ft15 ft
8 ft
Top View
Side View
Standard Range Lens
Extended Range Lens
High Bay Lens
Top View
9 ft
0 ft 14’ 12’ 10’ 6’ 3’ 0’ 3’ 10’6’ 12’ 14’
Side View14 ft
7 ft
0 ft
7 ft
14 ft
Side ViewTop View
27 ft
14 ft
0 ft
14 ft
27 ft
Side View
27’ 16’ 9’ 3’ 0’ 3’ 9’ 16’ 27’
9 ft
0 ft
Side ViewTop View
40 ft
18 ft
0 ft
18 ft
40 ft
40 ft
20 ft
10 ft
0 ft
Side View
40’ 30’ 20’ 10’ 40’ 30’ 20’ 10’ 0’
Side ViewTop View
Side View
15 ft
7.5 ft
0 ft
7.5 ft
15 ft
180˚
15˚
15˚
4 ft
0 ft15 ft
8 ft
Top View
Side View
California
Compliant24TITLE
- - -
- -
- -
- - -
- - - - - - - - - - - - - - -
ASHRAE 90.1-2010
6
Diversa Occupancy & Vaccany SensorsWhen interior spaces require sensor control for lights and loads, look no further that Diversa commercial grade occupancy and vacancy sensors. Diversa sensors can be used in a variety of locations to meet projects specifications while enabling your site to meet California Title 24, NYLL48 and AHSRAE compliance.
Diversa Dual Technology sensor are available in recessed ceiling, wall switch and corner mount designs and all use PIR and our ADI-Voice to maximize sensing effectiveness while minimizing false triggers from common interference items such as HVAC systems, music, vibrations, knocking and traffic. These sensors meet the needs in high spec projects by providing a wide variety of configuration features and options. Configurations can be done with on-board switches and dials or through the convenience of our handheld Infrared Setting Unit.
Diversa PIR sensors are available in recessed ceiling and wall switch formats and are competitive with other PIR sensors in the market, but offer quick, easy installation and are factory configured for the most common uses. Our PIR sensors also offer features and configurations that can be set with on-board switches and dials.
Advantages:• Single and proprietary dual
sensing technology for exceptional coverage
• Tilt and Swivel lens option available for optimization of detection capability
• IR Setting Unit for deck level configuration of dual technology sensors
• Diode Pulse output on Low Voltage Sensors for direct drive of Douglas relays
• Wall Switches (WOS series) can be ordered in White, Ivory, Grey, Black
Accessories:• Infrared Setting Unit (WIR-3110)• Diode Pulse Power Packs:• 120/277Vac 20A 1-pole (WP-PP20-D)• 120/277Vac 20A 2-pole (WP-PP20-2P-D)• 347Vac 20A 1-pole (WP-PP20-347-D)
Features:• Low voltage (24Vac), 120/277Vac,
and 347Vac for recessed ceiling and wall switch sensors
• Low voltage (24Vac) for corner mount sensors
• All sensors can be configured as Vacancy sensors (Manual ON, Auto OFF)
• Dedicated Vacancy sensors are available to meet California Title 24, ASHRAE 90.1 and New York Local Law 48 requirements for reducing building lighting energy consumption
California
Compliant24TITLE
- - -
- -
- -
- - -
- - - - - - - - - - - - - - -
ASHRAE 90.1-2010
Power Packs & Infrared Setting UnitInfrared Setting UnitThe Infrared Setting Unit is a handheld remote configuration tool for Diversa Dual Technology sensors. Read, configure, and address sensors through an LCD display and simple dial interface. Ladder time is avoided by programming sensors from the floor.
Power PackDiversa Power Packs provide 24Vac power to Diversa low voltage sensors and control loads based on the sensor’s commands.
Part Number: WIR-3110SpecificationsLoad Voltage: 120/277Vac or 347Vac, Class 1 Source, 60HzSwitching Load: 120/277Vac or 347VacInputs: Diode PulseOutput Power Source: 24Vac, 140 mA, Class 2
Certification:Certified to applicable UL & CSA StandardsPlenum rated UL2043
Part Numbers:WP-PP20-D (120/277Vac, 1-pole)WP-PP20-2P-D (120/277Vac, 2-pole)WP-PP347-D (347Vac, 1-pole)
7
FunctionalitySmart SenseWhen occupancy is no longer detected and lights time out, PIR and ADI-Voice detection stay active for 30 seconds to immediately reactivate the lights through motion or voice. Once Smart Sense has expired, sensors would operate as configured (vacancy switches would require a manual light switch for switching lights ON; dual technology sensors would require motion to be detected by PIR to switch lights on and activate ADI-Voice).
Self-Adapting TechnologyDiversa sensors have an Auto Mode which learns vacancy tendencies rather than manually setting the vacancy timer for a predetermined period of time. This technology can save energy by understanding how long a time delay is needed.
Walk Through ModeLights are switched OFF after 3 minutes if occupancy not detected after 30 seconds of initial detection (lights ON) saving energy by shortening the OFF delay when a quick entrance and exit occurs.
Sensor LinkSensor Link communication network for Diversa low voltage (24Vac) sensors. Sensor Link allows up to 8 sensors to communicate and coordinate their actions to act as a one cohesive zone. Sensor Link also provides additional control functions:
• By using a low voltage diode pulse light switch connected to the Sensor Link network, manual control over the lights can be achieved. Multi-level sequencing can be achieved by using 2-pole sensors.
• Maintained AC: Sensor control is disabled while AC is provided to the Sensor Link network (e.g. reception area remains lit during business hours, but after hours lights will only switch on when motion is detected - AC into Sensor Link network is managed through a time-of-day controller).
Restroom Mode (PIR 2-pole only)Allows pole delay timer to be synchronized for both pole or Offset (pole 2 OFF delay is extended 50% longer than pole 1 as set on time delay dial) e.g. - a room fan connected to pole 2 would stay on for 15 minutes if time delay for light (pole 1) set at 10 minutes.
Natural Daylight Mode (models with photo sensor)Natural light is used in a room until light level drops below Light Level dial set point. Lights are then activated to provide additional illumination.
Light Level Mode (models with photo sensor and dimming)Closed Loop Control of the light level. Lights come on and self-adjust to the light level set point when there is insufficient natural daylight.
Relay ControlDiversa low voltage sensors can control up to 4 relays through a diode pulse signal.
Part Numbers:WP-PP20-D (120/277Vac, 1-pole)WP-PP20-2P-D (120/277Vac, 2-pole)WP-PP347-D (347Vac, 1-pole)
A member of the Panasonic Group
Diversa® is a Registered Trademark of Douglas Lighting Controls. August 2016 – Subject to change without notice.LIT# DOSB120716
toll free: 877-873-2797direct: 604-873-2797lighting@douglaslightingcontrols.comwww.douglaslightingcontrols.com
Your Douglas Lighting Controls representative: