Post on 07-Mar-2016
description
transcript
1Rev. March 2010
Introducing two new products for new market opportunities
AVP4-ES100The most compact EtherSound Digital Power Amplifier
AVA4-ES100The first ES100 stereo professional audio interface
2Rev. March 2010
AVA4-ES100: the first EtherSound analog audio interface fully compatible to ES100
Easily insert and extract high quality audio to and from EtherSound
line level inputs or paging microphone inputs
line level analog output or digital S/PDIF
Integrated parametric EQ
3Rev. March 2010
AVA4-ES100:much more than an EtherSound analog interface
EtherSound ES100 interface to two high quality analog audio inputs and outputs
Insert two analog audio inputs to EtherSound and extract two analog audio outputs from EtherSound (or one S/PDIF output)
+ Professional EtherCon connectors for EtherSound
+ Audio inputs sensibility adapted to paging microphones
+ 12V phantom power available for microphones
+ One S/PDIF output extracted from the ES100 network
+ Gain control and Parametric Equalization on each input and output
+ 4 GPI and 4 GPO for local control and monitoring
+ RS232 configurable interface
+ Remote management and control with ESMonitor software through the EtherSound Network
4Rev. March 2010
AVA4-ES100 format and versions
Two versions of the product:
AVA4-ES100/AC
integrated 100-240V AC power supply
AVA4-ES100
12V DC power supply
Format 1U - 1/3 rack 19”
Fixing brackets available as standard on the down face the product
Rack support for up to 3xAVA4 in a 19” rack available in option
145 mm
203 mm
40 mm
5Rev. March 2010
AVA4-ES100 connections
EtherSound
Euroblock connectors are provided with the product
6Rev. March 2010
AVA4-ES100full control through the EtherSound network
Control through the AuviTran ESMonitor
software (free of charge)
Gain control on each input and output
Possibility to link left and right channels (stereo)
Parametric EQ control on each input and output
7Rev. March 2010
New option for delay and digital input
Optional card adding:
• One stereo SPDIF input and one
stereo SPDIF output
• Delay management
8Rev. March 2010
AVP4-ES100:
The most compact EtherSound Digital Power Amplifier
Effectively network and manage your public address systems
from source to loudspeakers
Manage audio evacuation systems constraints and provide
efficient networked Public Address + Audio Evacuation systems
9Rev. March 2010
AVP4-ES100 Many functions in a small (but smart) box
Automatic Routing
and Nominal Gain
for Priority Messages
GPI
RJ45
IN
RJ45
OUT
POWER
SUPPLY
SOFTWARE SETUP
DRC
EQ
EQ
GAIN
GAIN
GAIN
GAIN
POWER
AMPLIFIER
MASTER
GAIN
MATRIX
ETHERSOUND
INTERFACE
PIN
IN
PIN
OUT
GPO
EQ
EQ
10Rev. March 2010
EtherSound ES100 interface to two or four amplified outputs
Dynamic extraction from 2 or 4 channels of the EtherSound network (any of the 64 upstream and 64 downstream 24 bits audio channels allowed by EtherSound)
2 x 20W RMS for 8 Ω speakers
4 x 10 W RMS for 8 Ω speakers
+ Gain control, Parametric Equalization and Dynamic Range Control on each output
+ Alarm messages priority management
+ Speaker fault monitoring
+ 4 GPI and 4 GPO for local control and monitoring
+ RS232 configurable interface
+ Remote management and control with ESMonitor software through the EtherSound Network
AVP4-ES100Many functions in a small (but smart) box
11Rev. March 2010
AVP4-ES100Form factor and connectors
ES100 IN ES100 OUT
Format 1U - 1/3 19” rack
Fixing brackets available as standard on the product
Rack support for 3xAVP4 in a 19” rack available in option
Euroblock connectors provided with the product
12Rev. March 2010
AVP4-ES100 High quality audio amplification and full remote control through the EtherSound network
Control through the AuviTran ESMonitor software (free of charge)
Gain control on each output
Parametric EQ control on each output
Dynamic Range Control (limiter-compressor) on all outputs
13Rev. March 2010
AVP4-ES100: Main customer advantages for efficient Public Address systems
Ease of installation (and lower costs)
Cat5 (or Cat6) is the only cable type required
Lower installation costs through standardization of cabling
Easy to wire network connections (Euroblock) as option to RJ45
Standard electrical switches can be used for local controls through GPI
Based on an open and proven standard: EtherSound
EtherSound is adopted by more than 30 manufacturers
Large choice of equipments - More than 20,000 devices installed
Flexibility and full remote monitoring and control
Dynamic audio routing and channels selection through AuviTran ESMonitor software (from any of the 128 audio channels that EtherSound can transport)
Decentralized architectures, with distributed audio amplifier – Ease of upgrade
Audio quality and intelligibility
Adapted for live applications (extremely low latency audio distribution)
Full digital chain from source to loudspeaker
No audio compression - Individual EQ and volume controls on each output
14Rev. March 2010
AVP4-ES100: Specific functionalities for efficient audio evacuation systems
Remote monitoring of each zone attached to each AVP4 device,
through the AuviTran ESMonitor
Device status monitoring
Speaker fault monitoring (current sensor)
(only available in 2xout mode)
Priority announcement messages management:when the selected announcement channel is active on
EtherSound network (here DN1), the output is automatically set to a defined nominal gain
When a priority announcement occurs, the paging indicator
is ON
15Rev. March 2010
AVP4-ES100: Main customer advantages for building efficient audio evacuation systems
All the advantages listed above remain valid
Ease of installation (and lower costs)
Based on an open and proven standard (EtherSound)
Flexibility and full remote monitoring and control
Audio quality and intelligibility
Plus specific advantages for security constraints
High efficiency Public Address and Audio Evacuation Systems can be merged in one system
Decentralized networked architectures
Star architectures or ring architectures allowed by EtherSound ES100
No loss of connection if the ring is broken
Fireproof network cable available for EtherSound connections
Full control and monitoring through the network
Status of the devices / Speaker fault management
Graphic supervision and logging of events
Combinations of AVA4 and AVP4 allow the management of microphone paging priority and announcement messages priority
16Rev. March 2010
New option for digital input and delay management
Adds
One SPDIF input (with SRC)
Delay management (up to 175 ms)
Same optional card as for AVA4-ES100
17Rev. March 2010
Applications examples
High quality monitoring and intercom in live events
Sound distribution and paging in VIP rooms, dressing rooms…
Music distribution and audio paging systems in AV installations
( hotels, congress halls, museums, residential…)
Networked audio evacuation systems combined with
Hi-Fi Public Address
…
18Rev. March 2010
Example #1:intercom and monitoring in live concert
19Rev. March 2010
Example #2:Audio distribution in Theater rooms
20Rev. March 2010
Example #3: Residential music distribution with local controls
21Rev. March 2010
Example #4:Public Address and voice emergency system
22Rev. March 2010
Example # 5: Music distribution and paging
23Rev. March 2010
References
References
AVA4-ES100/DC ES100 analog audio interface (2xin and 2xout)
Version 12V DC power supply
AVA4-ES100/AC ES100 analog audio interface (2xin and 2xout)
Version 100-240V AC power supply
AVP4-ES100 ES100 Digital Power Amplifier (2x20W or 4x10W RMS)
Rack/AVA4-AVP4 19” rack support for up to 3xAVA4 or 3xAVP4
Consult your local distributor for pricing
AVS-ESMonitor Software for routing and controlling EtherSound
devices – including AVA4 and AVP4 control pages
Free, available on AuviTran web site
Option SPDIF/Delay AVA4-AVP4 Optional add-on card, adding one stereo SPDIF input
with SRC and delay management