Online Flow Monitoring System

(91)-9994266616/+(91)-9841908345

This monitoring system is comprised of three primary parts: a wireless-enabled Hach FL900 Series flow logger, a FLO-DAR AV sensor, and FSDATA Online Data Manager software.

The wireless FL900 logger connects with all major national cellular providers and allows users to review and analyze flow data in real-time from anywhere. This is both convenient and cost efficient as users can eliminate the need for regular site visits for data retrieval. Also, wireless technology makes site alarming possible.

Benefits:• Easy to mount on wall or near to appliance• Easy non-invasive installation• Low cost• Automatic data capturing, data posting• WiFi

based system directly connects to your WiFi Access Point

• Keeps collected data on IoT Cloud for analysis

Benefits:• Easy to mount on wall or near to appliance• Easy non-invasive installation• Low cost• Automatic data capturing, data posting• WiFi based system directly connects to

your WiFi Access Point• Keeps collected data on IoT Cloud for

analysis

Specifications:• Dimensions: 80 x 80 x 60 mm• Weight: 300 g• Ambient Conditions Temperature: -40 to +80 0C• Power Options: 4.8V DC• Temperature Range: -25 to 800C• Input Load Current: 0 to 30A (only AC loads)• Load Wire Diameter: Up to 13mm

monitoring system applications

These meters are extremely versatile. They have been developed specifically for the toughest multiphase process flows and for those areas where cutting the process pipe is not desired. It has been successful in a wide range of applications.

The following is a quick summary of that success:• Sulphuric acid in steel and HDPE - PLS and

Raffinate• Ball mill water feed and discharge lines• Cyclone overflow, underflow and feed lines• Heavy slurries such as chalcopyrite, phosphate, b

itumen rock, bitumen froth, ammonium sulfate, paper pulp and lime rock

• Tailings lines• Green liquor - bauxite

• Lime mud• HCL• Water conveyed polymer pellets and dust• Clean and dirty water• Super critical ethylene• Glycol and water• Raw brine• Latex• Caustic soda• Anhydrous ammonia

Features and specifications:• Precision: +/- 1%• Repeatability: +/- 0.2%• Data interface: RS232 /RS485• Communication protocol: Modbus• Operation: 4x4 tough key• Signal output: Current signal: 4~20ma, frequency signal :

1~9999Hz (OCT output)• Alarm signal: Relay and OCT output• Measurement cycle: 500ms (2 times/s)

• Power supply: AC220V/DC24 optional• Pulse signal: Pulse of +/- net flow

accumulation. Relay output• Signal output: 1 way or 3 way 4~20 mA

input, precision 0.1% including• Other Function: Can remember

accumulative flood last 64 days/64 months/5 years 

Contact Us• Mr. DharmendarKumar (Operation Manager)

No. 1, Surya Prakasam street, Krishnapuram, Next to Corporation Bank, Ambattur, Chennai - 600053. Tamil Nadu, India

• Mobile: (91)-9994266616/+(91)-9841908345• Telephone :+(91)-(44)-42043266• E-mail:info@cpcinfo.in• http://cryogenicprocesscontrol.com/Online-flow-monitoring

-system.html