Post on 03-Jul-2020
transcript
Product Information
Our vision is to deliver best in class experience to our customers around the world
1 First Integrated Solutions
4. Equipment Rental – Tooling
23. Equipment Rental – Lifting
34. Manufacturing & Supply
38. HAVS Management Services
39. Inspection Services
47. Equipment Maintenance & Management
48. First Integrated in Numbers
49. Accreditation
Welcome
First Integrated provide industry leading rental equipment, inspection services and wire rope manufacturing service.
Our services include:
• Tooling equipment for hire• Lifting equipment for hire• Inspection Services• HAVS Management
services• Heavy Lifting/Specialist
Wire Rope Equipment
Contents
2 Contents Page
Our LocationsAberdeen
First Integrated SolutionsFirst Integrated House
Broadfold RoadBridge of Don
Aberdeen, ScotlandAB23 8EE
Main: +44 (0) 1224 707585sales@firstintegrated.co.uk
LondonFirst Integrated Solutions
Unit 2 Lamb’s Business ParkTerracotta Road
GodstoneSurrey, England
RH9 8JLMain: +44 (0) 1883338551
londonsales@firstintegrated.co.uk
TrinidadFirst Integrated Solutions
LP #27 Old Longdenville RoadLongdenville
Chagnuanas, TrinidadMain: +1 868 221 9162
kevin.rampersad@firstintegrated.co.uk
About Us
First Integrated is an international provider of state of the art lifting
equipment, inspection services and rental equipment, servicing clients
from our UK head office in Aberdeen, London and our international hub in
Trinidad.
First Integrated Solutions considers HSEQ compliance to be of
fundamental importance. We fully adhere to an integrated management system encompassing ISO 9001:2015,
OHSAS 18001:2007 and ISO 14001:2015
3 About First Integrated
ATEX Equipment
Rental Equipment- Tooling
• ATEX Heating & Lighting• Electric & Pneumatic Power Tools• Portable Painting Equipment• Portable Blasting Equipment• Extraction & Ventilation Equipment• Air Distribution Equipment• Industrial Vacuums• ATEX Low level access platforms• Hydraulic Equipment• Welding Equipment
Specifications
400 Volt440 VoltLightweight & Manoeuvrable
Product Link
• Mains Distribution Unit
EX Heater
Specifications
440 Volt Twin 32A Outlets
Product Link
• EX Heater
440V Mains Distribution Unit
Specifications
EX 20cmEX 30cmEX 40cm
Product Link
• Extension Cable• Transformer
EX 110V Fan
4 Rental Equipment - Tooling
Specifications• ATEX and IECEx Certified for
Zones 1,2,21,22• Available in 110 and 230V• Operational in temperatures
as low as -40C
Product Link
• Extension Cable• Transformer
EX Pipe Heating Jackets
ATEX Lighting Equipment
Specifications
• 110V
110V Battery Back up Linkable Light
Product Links
• Extension Cables• Transformer
Specifications
• 24V• Highly Versatile
24V Battery Back up Lights
Product Links
• Extension Cable• Transformer
Specifications
• 24V• Zone 1 certified• Compact & Efficient
24V Slam Hornet Light
Specifications
• 110V
110V Linkable Lights
Specifications
• High performance• Robust• Lightweight
Safety LinkEX 110v LED FloodlightSpecifications
• 110V• Zone 1 certified
110V Evo Junior Light
Product Links Specifications
• Zone 1 & 2 certified• Availble models: WL-85,
WL-70, & WL-75• 25,000 hour life
Battery Operated LED Floodlight
Product Links
• Extension Cable• Light 24V
Specifications
• 110V-24V
110V-24V Transformer
5 ATEX Lighting Equipment
Product Links
• Extension Cables• Spider Box• Transformer
Product Links
• Extension Cables• Spider Box• Transformer
Product Links
• Extension Cables• Spider Box• Transformer
Product Links
• Extension Cable• Spider Box• Transformer
ATEX Lighting Equipment
Product Links
• 110V Extension cables
Specifications
• ATEX and IECEx certified• Tough and durable• Waterproof and dustproof
110V Spider Box
Product Links
• 110V Extension cables
Specifications
• ATEX Certified• Compact and lightweight• Fuse protected• Waterproof and dustproof
EX 240V/110V Transformer
Specifications
• ATEX Certified• Compact and lightweight • Fuse protected• Waterproof and dustproof
EX 440V/110V Transformer
Product Links
• 110V Spider Box• EX 240V/110V Transformer• EX 440V/110V Transformer
Specifications
• ATEX Certified• Tough and durable• Waterproof and
Dustproof
110V Extension Cables
6 ATEX Lighting Equipment
Product Links
• 110V Extension cables
Electric Power Tools
Product Links
• Cutting blades (spare)• Specialist gloves• Full face mask• HAV products
Specifications• Features electronic control
and orbital mechanism• Innovative AVT (Anti-
Vibration Technology)• Rubberized soft grip
Recip Saw 110V
Specifications• 15 AMP motor• 3,800 RPM • Engineered to cut 4-1/2-inch
round stock at 45 degrees and 90 degrees
Chop Saw 110V
Specifications
110V Impact Wrench
Specifications• Low vibration needle/chisel
scaler• Pistol Grip tool• Removes heavy coatings
and corrosion
110V Needle Gun
110V Bristle BlasterSpecifications• Low operating speed• Light construction 4.0 lbs• Patented accelerator bar• Gear reduction increases the
torque at 3,200 rpm
7 Electric Power Tools
Product Links
• Cutting disks (spare)• Specialist gloves• Full face mask• HAV products
Product Links
• HAV products
Product Links
• HAV products
Product Links
• HAV products
Specifications• Variable speed – 125mm.
Variable speed control dial (4;000 – 12;000 OPM)
• Rubberized palm grip and handle
110V Orbital Sander
Product Links
• HAV products
110V Hammer DrillSpecifications• 110V• Variable speed• Rubberized handle for
comfort
Product Links
• HAV products
110V Fasteners Tool
Specifications• Weight: 3.33 kg• Power (max.): 85 J• Dimensions (LxWxH): 473 x
134 x 280 mm
Product Links
• HAV products
Electric Power Tools
Product Links
• Transformer• Extension Cable• HAV products
Specifications• Input wattage 450 W• No Load Speed 0 - 2400 rpm
Net weight 1.6 kg• 110V
Angle Drill
Specifications• Input wattage 840W• Spindle Size M14x2mm • Available in 4”,5”,7” & 9” • Net weight 1.7 - 3.2 kg• 110V
Angle Grinder
Specifications• Input wattage 400 w • Dimensions (LxWxH): 285 x
740 x 740 mm• Net weight 1.71 - 1.87 kg• 110V
Internal Die Grinder
Battery Nibbler
Specifications• Cordless nibblers• Slim motor housing• High cutting capacity• Anti re-start function
Circular SawSpecifications• Depth of Cut @ 90° 75.5 mm • Input Wattage 1800 w • Blade Diameter 210 mm • Net weight 4.8 kg• 110V
8 Electric Power Tools
Product Links
• Transformer• Extension Cable• HAV products
Product Links
• Transformer• Extension Cable• HAV products
Product Links
• Transformer• Battery pack (spare)• HAV products
Product Links
• Transformer• Extension Cable• HAV products
Specifications• Battery Type Lithium-ion • Voltage 18 v• Max Torque S/H 24 / 42 Nm• Net weight 1.7 kg
18V Battery Combi Drill
Product Links
• Air Hose• Air Receiver• HAV products
Pneumatic Power Tools
Product Links
• Air Hose• Air Receiver• HAV products
Specifications
• 5 50mm (2”) carbide tipped heads
• Production rates in excess of 40 m² per hour
Deck Scrabbler
Specifications
Battery Type Lithium-ion Voltage 18 v Maximum Output 400 wNet weight 2.3 - 3.0 kg
Rotary Hammer Drill 16mm
Specifications
• Powerful Air powered calking gun
• Lightweight• Durabel
Calking Gun
Specifications• Patented accelerator bar• Special designed gear
reduction• Low operating speed• Light construction 4.0 lbs
Air Bristle Blaster
9 Pneumatic Power Tools
Product Links
• Air Hose• Air Receiver• HAV products
Product Links
• Air Hose• Air Receiver• HAV products
Product Links
• Air Hose• Air Receiver• HAV products
Air Rivet Gun
Product Links
• Air Hose• Air Receiver• HAV products
Specifications
• Pneumatic• Lightweight
Air Pistol Drill
Specifications
• Ergonomic handle• Rubberized grip• Reversable
Air Angle Grinder
Specifications
• Pneumatic• Lightweight
Air Die Grinder
• Pneumatic• Lightweight• Ideal for small difficult to
reach areas
Specifications
Product Links
• Air hoses• HAV products
Product Links
• Air hoses• Grinding discs (spare)• HAV products
Product Links
• Air hoses• HAV products
Pneumatic Power Tools
Air Impact Wrench
Product Links
• Air hoses
Specifications• Twin hammer mechanism -
Through handle exhaust• Available in 1/2″, 3/4″, 1″,
1.5″
Air Needle Gun
Specifications• Low vibration needle/chisel
scaler• Lightweight• Removes heavy coatings
and corrosion
Spitznas Air Saw
Specifications• Cutting speed of this
electrically• Reciprocating saw• Ideal for cutting plastics
Cengar Air SawSpecifications• Standard and special 12mm
(1/2″) wide Bi-Metal Blades• Cut pipes up to 150mm (6″)
diameter• Fitted with a safety isolator
10 Pneumatic Power Tools
Product Links
• Air hoses
Product Links
• Air hoses
Product Links
• Air hoses
Air Chipping Hammer
Product Links
• Air hoses
Specifications• Lightweight• Suitable for metal and stone• Ideal for removing plaster,
tiles etc.• Kickback damping
Portable Painting Equipment
Product Links
• 15m of 3/8"ID + 1.8m of 1/4"ID whip hoses Spare
Specifications
• Pump Ratio 60:1• Max Working Pressure 417
Bar• Max Delivery Rate 12.9 gpm
Graco Airless Pneumatic Sprayer 60:1
Product Links
• Graco NXT• Graco King
Specifications• Maximum Working Pressure• 4000 psi• Weight 8 lbs• Dimensions L 14.0 W 4.5 in
Height 12.0 in
Graco Battery Operated Paint Spray Unit
Product Links
• 15m of 3/8"ID + 1.8m of 1/4"ID whip hoses Spare
Specifications
• Pump Ratio 70:1• Max Working Pressure 417
Bar• Max Delivery Rate 12.9 gpm
Graco Airless Pneumatic Sprayer 70:1
11 Portable Painting Equipment
Portable Blasting Equipment
Specifications
• Ultra portable• Low maintenance • Light & robust
Product Link• Blast helmets• Blast Suits & Capes• Deadman handle• Breathing air filter• Heavy duty gauntlets
Specifications
• 780mm high x 400mm x 800mm
• Expendable abrasive capacity of 25kg
Product Link• Blast helmets• Blast Suits & Capes• Deadman handle• Breathing air filter• Heavy duty gauntlets
1028NC Blast Machine
Specifications
• 1100mm high x 820mm x 960mm
• Twice the capacity of the 1440 machine
Product Link• Blast helmets• Blast Suits & Capes• Deadman handle• Breathing air filter• Heavy duty gauntlets
2040NC Blast MachineIBIX IBIMAR 9 UNIT
Specifications
• Lightweight• Low maintenance
Product Link• Blast helmets• Blast Suits & Capes• Deadman handle• Breathing air filter• Heavy duty gauntlets
Specifications
• 1320mm high x 850mm x 960mm
• Abrasive capacity of 0.180 cubic metres
Product Link• Blast helmets• Blast Suits & Capes• Deadman handle• Breathing air filter• Heavy duty gauntlets
2452NC Blast Machine
Specifications
• 1070mm high x 670mm x 800mm
• Abrasive capacity of 75kg
Product link• Blast helmets• Blast Suits & Capes• Deadman handle• Breathing air filter• Heavy duty gauntlets
1440NC Blast Machine
IBIX IBIMAR 13 Unit
12 Portable Blasting Equipment
Product Links• Blast helmets• Blast Suits & Capes• Deadman handle• Breathing air filter• Heavy duty gauntlets
Specifications• Capacities of 15,41, 73• Reduced downtime
ATEX 1448 Wet/Dry
Air Distribution Equipment
Product Links
• Compressor• Air Hose• Air Receiver
Specifications
• Diameters from 300mm to 600mm
• Pneumatically & electrically driven available
ATEX Air Fan Air Hose
Product Links
CompressorAir Receiver
Product Links
• Compressor• Air Hose
Specifications
• Tough, durable & efficient• Portable, only 2KG
Cyclone Venturis
Product Links
• Compressor• Air Hose
Specifications
• BS EN 286 Compliant
40L Air Receivers
Specifications
• 15mtr Lenghts• MacDonald Couplings• Crow Foot Coupling
13 Air Distribution Equipment
Industrial Vacuums
Product Links• Stainless Steel Extension
Tube Spare• Dry Brush Nozzle Spare• Wet Nozzle Spare
Specifications• 110/230v / 50/60Hz• 110v Max Airflow 56Ltr/Sec
230v Max Airflow 59Ltr/Sec• MEVA 20L, 30L & 40L
available
ATEX Industrial Air Vacuum
Product Links
• Gloves• Restrictor Spare (CV-14
Mk3) • Gulper Spare (CV-15 Mk3)
Specifications
• Economic & Compact• 3 hours continuous
production• Low cost system
Clemvac
14 Industrial Vacuums
Product Links
• Spare Filter
Specifications• Efficient closed circuit
system• Purpose designed jet system• Available to ATEX standards• HEPA filtered available
Hodge Vac
Product Links
• Stainless steel extension• Spare tube• Dry brush nozzle spare• Wet nozzle spare
Specifications• 70 litre stainless steel
container• Robust steel frame• Tilt or lift-off container
emptying
Dirt Hog
ATEX Low Level Access Platforms
15 ATEX Low Level Access Platforms
Product Links
• Spreader Beam• Safety Harness• Lanyard
Specifications• Oil, battery, & power free• Max working height 4.2m• Raises in 15 secs• Lightweight &
manoeuvrable• Unlimited lift cycles• Virtually maintenance free• Triple guard rails & tool
tether points• Patented handle elevation
system
PowerTower Ecolift
Specifications• Oil, battery, & power free• Max working height 3.5m• Raises in 11 secs• Lightweight &
manoeuvrable• Unlimited lift cycles• Virtually maintenance free• Triple guard rails & tool
tether points• Patented handle elevation
system
PowerTower Pecolift
Product Links
• Spreader Beam• Safety Harness• Lanyard
Specifications
• Working pressure 700 Bar• Choice of valve options• Compact, lightweight &
powerful
Product Link
• Shifting Skates
Double Acting Pumps
Hydraulic Equipment
Specifications
• Ranges: MHP, MHP-PU, AHP, AHP-CR, AHP2, AHP2-CR, AHP3, ATDP
Product Link
• Gauge• Hose• Manifold
Hydrotest Pumps
Specifications• Working pressure 700 Bar• Operated from standard 7
Bar air supply• Compact, lightweight &
powerful
Product Link
• Shifting Skates
Air Pumps
Specifications• Low pressure flow rate 7 ltr
/ min. up to 70 Bar• High pressure flow rate 0.65
ltr/min. up to 700 Bar• Two stage hydraulic pump
Product Link
• Shifting Skates
Electric Pumps
Specifications
• Ranges: HVL, HPS, HLS, HSS, HAS, HHA, HHS, HHR, HAD, HFL, HFG, HGG, HSG, HPC, & PCS sets
Product Link
• Pump• Hose• Gauge• Manifold
Cylinders
Specifications
• Ranges: HP, HPX, HP-FP, BPP, HEP1, HEP103, HEP2, HEP3, HEP5, HSP, AHP11, HAP, HPP
Product Link
• Cylinder• Hose• Gauge• Manifold
Pumps
Specifications
• Ranges: JAH, JAS, JCS, JCH, JS, HMJ
Product Link
• Shifting Skates
Jacks
Specifications• Capacity from 3 to 100
tonnes• Strong rigid steel
construction• Working pressure 700 Bar
Product Link
• Shifting Skates
Bottle Jacks
16 Hydraulic Equipment
Hydraulic Equipment
Specifications
• Imperial & metric bolt tensioners & tensioner nuts
Product Link
• Hose• Gauge
Bolt Tensioners
Specifications
• Ranges: CH, SC, BC, HCH, CT, HWC, HSWC, HWRC, HCC
Product Link
• Pump• Hose• Gauge
Crimpers & Cutters
Specifications
• Ranges: HMNS, DNS, HFS-H, HFS-TK, MFS, JS, SJS, PB, RKT, RKF, RSN, RSA, RSG/D, HPF & Tool boxes
Product Link
• Various
Tools
Specifications
• Ranges: TWM, HTW, TWG, TWP, TWP-OG, TWS, IS, MS, TWH, IB, MB, BW, HTWP, TPA, TPE, IW, FRL
Product Link
• Pump• Gauge• Hose
Torque Tools
17 Hydraulic Equipment
Manifolds
Specifications• Working Pressure 700 Bar• Choice of open or controlled
manifolds• 2, 4, 5, 6 or 8 outlet port
models available
Product Link
• Hydraulic Hoses• Hydraulic Gauges
Specifications
• Working pressure 700 Bar• 4:1 Factor of safety• Hand grip protective strain
relievers
Product Link
• Pump• Hydraulic Gauge
Hydraulic Hoses
Specifications
• Torque capacities from 10 to 850 Nm
• Repeatable accuracy +/- 3%• Dual scale Nm & lbf.ft.
Product Link
• Nuts• Bolts
Hand Torque Wrenches
Specifications• Output pressures up to 2931
Bar• Suitable for various fluids• 150mm dual scale vibra
pressure gauge
Product Link
• Gauges• Hose
Hydrotest Pumps
Hydraulic Equipment
Digital Gauge
Specifications
• 5 digit LCD display• Choice of pressure readings• 0.5% full scale accuracy
Product Link
• Hydraulic Hoses• Hydraulic Oil
Gauges and Mounting Blocks
Specifications• Clear precise dual scale
readings• Manufactured to EN837-1• Calibration certificates on
request
Product Link
• Hydraulic Hoses• Hydraulic Oil
Couplers and Fittings
Specifications
• Large selection of standard adaptors
• Working pressure 700 Bar
Product Link
• Hydraulic Hoses• Hydraulic Oil
SpecificationsHF032-1 1.0L HF032-5 5.0LHF032-25 25.0L HF046-1 1.0LHF046-5 5.0L HF046-25 25L
Product Link
18 Hydraulic Equipment
Product Link Specifications
Welding Torches H300 x W190 x L450Welding Masks Weight 14kgWelding Gloves Input Range 40-100V
Viper 2500S
Welding Equipment
Product Link Specifications
Welding Torches Input Current at Max Output 49AWelding Masks Max Output Current 700AWelding Gloves H450 x W310 x L570mm
Weight 38kg
Product Link Specifications
Welding Torches Input range 380-480VWelding Masks Max Output Current 500 AmpsWelding Gloves H455 x W235 xL500mm
30Kg
RT2000 DV
Product Link Specifications
Welding Torches Input Range 110/230/DVWelding Masks H310 x W150 x L420mmWelding Gloves 18Kg
Multi Process R5000CC/CV
Air Arc Gouging R7000
19 Welding Equipment
Product Link Specifications
Welding Torches Input Voltage 24 - 36V AC Welding Masks Current Rating 350 amps @ 100% Welding Gloves Weight 15Kg
WFV12-4C FEEDER
20 Welding & Induction Heating Equipment
Welding & Induction Heating Equipment
D402K
Specifications
• Kubota V1505-E2BG1 liquid cooled diesel engine
• 20.2 units of Horsepower• Peak wattage of 12,000 W
Product Link
• Welding Torches• Welding Masks• Welding Gloves
Product Link
• Welding Torches• Welding Masks• Welding Gloves
Specifications
• 4-cylinder liquid cooled diesel engine
• Able to provide a 1 or 3 phase alternating current
DX500e
ProHeat 35 Air-Cooled System
Specifications• Designed for Preheating
Applications up to 200° C• Optional Digital Recorder• Pipe Diameters from
203mm to 1422mm
Product Link
• Welding Torches• Welding Masks• Welding Gloves
Product Link
• Welding Torches• Welding Masks• Welding Gloves
Specifications• Designed for High
Temperature Preheating• Up to 788° C (1450° F)• Optional Digital Recorder
ProHeat 35 Liquid-Cooled System
Breathing Equipment
Specifications
• Maximum air flow 220L/min• Visual and Audible Alarms• Internal battery duration up
to 8 hours
Product Link
• PAF-0040 Battery Charger• PAF-0034 Power System
(exc mask)
Cleanspace 2
Specifications
• Polycarbonate visor• Silicone face seal• Orinasal Mask cushion• Mylar speech diaphragm
Product Link
• PAF-1017 Full Face Mask Spectacle Kit
• PAF-1018 Tear off Visor Anti-Scratch Protectors (pack of 10)
PAF 1014 Full Face Mask
Specifications
• Maximum air flow 220L/min• Visual and Audible Alarms • Internal battery duration up
to 8 hours
Product Link
• PAF-1017 Full Face Mask Spectacle Kit
• PAF-1018 Tear off Visor Anti-Scratch Protectors
Cleanspace Ultra
Specifications
• Maximum air flow 220L/min• Visual and Audible Alarms• Internal battery duration up
to 8 hours
Product Link
• PAF-0060 CleanSpace EX Power System
• CleanSpace EX Battery Charger
Cleanspace EX-01
21 Breathing Equipment
Specifications
• Removes carbon monoxide, carbon dioxide, sulphur dioxide and nitrogen dioxide
Product Link
• Gas detectors
ALG10 Breathing Air Purification System
Specifications
• Mk1 & Mk2• Standardised to BS
EN12021:2014
Product Link
• Air Testing Kit• Mini Gas detectors
Air Purity Analyser APA
Cleanspace 2 Half Mask
Specifications• Weight average 125g• Dimensions 170x130x70mm• Easy removal for cleaning• Transparent and facilitates
communication
Product Link
• Mask adaptor for quantitative fit
CleanSpace Full Face Mask Spectacle Kit
Specifications
• Allows users to wear spectacles with full face masks
Product Link
• PAF 1014 Full Face Mask
Breathing Equipment
Full Face Mask Tear off Visor
Specifications• Clear and easy to use• Pack of 10 tear offs• Allows sweating and
breathability
Product Link
• PAF 1014 Full Face Mask
Mask Adapter for Quantitative Fit
Specifications• Quick and easy to install• Fits with the TSI PortaCount
equipment• Easy to wash and quick
drying
Product Link
• CleanSpace 2 Half Mask
Full face Mask Test Fit Adaptor
Specifications• Allows sweating and
breathability• Easy to wash and quick
drying
Product Link
• CleanSpace 2 Full Face Mask
CleanSpace 2 7 Ultra Spare Battery Charger
Specifications• Multinational
interchangeable plugs• Dual leads for charging two
PAPR power units simultaneously
Product Link
• CleanSpace 2• CleanSpace Ultra
22 Breathing Equipment
First Integrated Solutions areworld leaders at providingtop quality Rigging Lofts,consisting of the highestquality lifting equipment onthe market.
Our readily available hire &sales fleet ensures we canprovide our clients withquality equipment tailoredto their requirements atshort notice.
Rigging Lofts
Rental Equipment- Lifting
• Rigging Lofts• Air Hoists• Eye Bolts & Swivel Rings• Webbing & Round Slings• Mechanical Lifting Equipment• Spreader Beams
23 Equipment Rental – Lifting
Specifications• WLL: 250/500Kg• Lift Speed w/ load:
10.5m/min• Lowering Speed: 17.9m/min• Weight w/ 3M: 31.1Kg
Powered Hoists
Product Links
• Compressor• Air Hose• Air Receiver
500Kg Air Hoist
Specifications
• WLL: 2000Kg• Lift Speed w/ load: 3m/min• Lowering Speed: 5.2m/min• Weight w/ 3M: 39.7Kg
2000Kg Air Hoist
Specifications• WLL: 12000Kg• Lift Speed w/ load:
0.6m/min• Lowering Speed: 1.1m/min• Weight w/ 3M: 170Kg
12000Kg Air Hoist
Product Links
CompressorAir HoseAir Receiver
1000Kg Air Hoist
Specifications• WLL: 6000Kg• Lift Speed w/ load:
1.4m/min• Lowering Speed: 2.3m/min• Weight w/ 3M: 91Kg
6000Kg Air Hoist
15000Kg Air Hoist
24 Manual Hoists
Product Links
• Compressor• Air Hose• Air Receiver
Product Links
• Compressor• Air Hose• Air Receiver
Product Links
CompressorAir HoseAir Receiver
Product Links
CompressorAir HoseAir Receiver
Specifications
• WLL: 1000Kg• Lift Speed w/ load: 6m/min• Lowering Speed: 10.3m/min• Weight w/ 3M: 34Kg
Specifications• WLL: 15000Kg• Lift Speed w/
load:0.5m/min• Lowering Speed: 0.9m/min• Weight w/ 3M: 210Kg
3000Kg Air Hoist
Product Links
CompressorAir HoseAir Receiver
Specifications• Robust 3 step planetary
gearbox• Load chain 13 x 36 mm• Automatic, adjustable load
limiter
Electric Hoists
Product Links
• Wire Rope• Shackles• Slings
Specifications
• Electric Wire rope hoist.• Suitable for Light Industrial
Use
Safety Equipment
Product Links
• Safety Harness
Specifications
• External Length 107mm• Min Breaking Strength 25kN• Zinc Plating• Weight 215g
Karabiner Hooks
Product Links
• Karabiner• Lanyard
Specifications• Web Material 45mm water
repellent polyester• High tensile fittings• Rip stitch indicators• Adjustable shock absorber
Scaffolders Kits
Product Links
• Karabiner• Safety Harness
Specifications• 26mm water repellent 37kN
polyester webbing• Steel adjuster and RGK1• Max Arrest Force < 6kN• Adjustable shock absorber
Shock Absorber Lanyards
Product Links
• Safety Harness• Karabiner
Inertial Reels
Product Links
• Safety Harness• Karabiner Hooks
Specifications
• Allows worker to stand in harness
• Compact and Lightweight • Easy To Use
Trauma Suspension Straps RGK42
Product Links
• Rescue Recovery Winch• Trauma Suspension Straps
Specifications
• 80mm leg intervals• Two additional anchorage
points
Tripod KitsRGR1 Rescue Tripod
Product Links
• Karabiner• Safety Harness
Specifications• Material 26mm water
repellent polyester • Fittings RGK12, and any
compatible connectors• Length 0.45m
Extension Strops RGL4
Product Links
• Shock Absorber Lanyard
Safety HarnessSpecifications• Web Material 45mm water
repellent polyester• High tensile fittings• Rip stitch indicators• Weight 0.95 kg
SpecificationsWeight 6.5 kgMax Arrest Force < 6 kNFall indicating connectorHigh tensile steel alloyL 325 x W 200 x D 80
25 Safety Equipment
Safety Equipment
Product Links
• Harness• Rescue Tripods
Specifications
• Various
Escape Sets
Product Links
• Batteries
Specifications
• Compact and lightweight • Digital display• Monitors exposure
Mini Gas Detectors
26 Safety Equipment
Lifting Accessories
Product Link
• Chain Block• Shackle
Specifications
• Up to 30Tonne SWL• Supplied in 1mtr increments• Safety Factor 7:1
Webbing Slings
Product Link
• Wire Rope• Shackle
Specifications
• Forged Steel quenched and tempered
• All bolts hot dip galvanised after threading
Eye Bolts
Product Link
• Chain Block• Shackle
Round Slings
Product Link
• Shackle
Specifications
• heat treated, Quenched & Tempered alloy steel.
• Individually Mag inspected with certification.
Swivel Hoist Ring
Product Link
• Webbing Slings• Round Slings
Specifications
• Hot Dip galvanized steel• Lock Nuts available for all
sizes • Fatigue Rated
Turnbuckles
Product Link
• Wire Rope• Wirelock Resin
Specifications
• Open or closed spelter sockets
• Marine grade available
Sockets
27 Associated Rigging
Specifications
• Up to 30Tonne SWL• Supplied in 1mtr increments• Safety Factor 7:1
Product Link
• Wire Rope• Shackles
Specifications
• Forged - Quenched and Tempered, with alloy pins
• Hot Dip galvanized or Self Coloured
Shackles
Product Links
• Wire Rope• Shackles
Specifications
• Alloy Steel - Quenched and Tempered
• All sizes are forged unless otherwise specified
Master Links
Associated Lifting Equipment
Product Links
• Chain Block• Shackles• Slings
Specifications
• Hardened Steel Jaws• Locking Mechanism
Beam Trolleys
Product Links
• Chain block• Pull Lift• Air Hoist• Shackle
Specifications
• WLL at 0° Vertical 3048kg• Width Adjustment 76 –
203mm• Average weight 23.5kg
Product Links
• Chain Block• Shackles• Slings
Specifications
Product Links
• Chain Block• Shackles• Slings
Product Links
• Chain Hoist• Shackle
Specifications
• SWL 500Kgs• Suitable for all 210 litre
steel barrels
Universal Clamps
Product Links
• Chain block• Pull Lift• Air Hoist• Shackle
Specifications• 3.0t, 5.0t and 10.0t
capacities available• 4:1 factor of safety• Operating temperature of -
50°C to +50°C
Product Links
• Chain Block• Shackles• Slings
Specifications• HPC 1 • W 1524kg• Average weight 12kg
Product Links
• Chain Block• Shackles• Slings
Specifications
• SWL 1 to 30 Tonne
Specifications
• SWL 1 & 2 tonne
Verticle Barrel Clamp Plate Clamps
Bulb Clamp
Horizontal Lift Clamp Angle Clamp
Beam Clamps
28 Associated Lifting Equipment
Specifications
• SWL 500kgs to 3 Tonne
Associated Lifting Equipment Ctd.
Specifications
Snatch Blocks
Product Links
• Chain Block• Shackles• Slings
Specifications
• Easy opening feature • Pressure lube fittings.
Derrick Blocks
Product Links
• Chain Block• Shackles• Slings
Specifications
• 4, 8, 12, 15, 25 or 30 metric ton capacity • 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 7/8”, 1”, 1-1/8 and 1-1/4”
29 Associated Lifting Equipment
Manual Lifting Equipment
Product Links
• Beam Clamp• Beam Trolley• Slings• Shackles
Specifications
Brake EfficiencyChain End StopsOverload ProtectionSafety Brake
Specifications• Range from 0.5t to 30.0t• Twin bar or single bar
trolley options• Corrosion or Spark Resistant
versions available
Combination Chainblock / Trolley
Product Links
• Shackle• Slings
Chain blocks
30 Associated Lifting Equipment
Product Links
• Wire Rope
Specifications
Brake EfficiencyChain End StopsOverload ProtectionSafety Brake
Wire Rope Pulling Machine
Product Links
• Wire Rope
Specifications
• Compact lightweight design with integral pump and cylinder.
Hydraulic Pulling Machine
Product Links
• Wire Rope
Specifications
• Compact lightweight design with integral pump and cylinder.
Lever Operated Hoists
Material Handling
Machine Skates
Product Links
• Spare skates
Specifications• Carrying capacity of 20, 30
or 60 tonne.• Professional build quality.• Lockable steel container
with nylon castors.
Specifications• Adjustable in height• Lightweight• Various beam lengths
available 3m to 6m span
Aluminium Gantries
Product Links
• Chain Slings• Girder Clamps
31 Associated Lifting Equipment
Product Links
• Pallets
Pallet TrucksSpecifications
• Hydraulic pump with a slow lowering hand control, 3 position
Product Links
• Various
4 Wheel Site TrucksSpecifications
• 4 Wheeled• Manoeuvrable• Flat Bed
Product Links
Cable Drum JacksSpecifications
Load Measurement
Product Links
• Compressive digital load indicator
Specifications
• 11-25kg
Specifications
Tensile Digital Load Indicator
Product Links• Load Shackle• Load Link• Compressive Load Cell• Load Pin
Specifications• Long battery life• Operating Temperature -
10°C to +50°C • Relative humidity 95% non-
condensing
Compressive Digital Load Indicator
Product Links• Load Shackle• Load Link• Load pin
SpecificationsPlug-in connector versions
availableIntegral signal conditioning availableSubsea variants available
Running Line Monitor
Product Links
• Load Shackle• Load Link• Load Pin
Specifications• Simple and quick access for
line/rope fitting • Line capacities up to 120Te• Marinized design available
Slab Test WeightsProduct Links
• Compressive digital load indicator
Specifications
• 250-10te
Hand Test Weights
32 Associated Lifting Equipment
Product Links
• Tensile digital load indicator
Specifications
• 15t-100t
Test Cradles
Product Links SpecificationsSlings Shackle Up to 6t at 3.6m/148"Digital Load Indicator Up to 4.5m/176" lower capacity
MOD 6
Modlular Spreader Beams
Product Links SpecificationsSlings Shackle Up to 12t at 4.75m/15ftDigital Load Indicator Up to 6.5m/21ft lower capacity
MOD 12
Product Links SpecificationsSlings Shackle Up to 24t at 5m/17ftDigital Load Indicator Up to 8m/26ft lower capacity
MOD 24
Product Links SpecificationsSlings Shackle Up to 34t at 6m/19ftDigital Load Indicator Up to 10m/32ft lower capacity
MOD 34
Product Links SpecificationsSlings Shackle Up to 50t at 8m/26ftDigital Load Indicator Up to 13m/42ft lower capacity
MOD 50
First Integrated Solutions areofficial distributors of the worldrenowned Modulift SpreaderBeams, providing heavy liftingsolutions.
In addition to the MOD 6-70range, other specifications areavailable upon request to meetclients varied demands.
Our partnership with Moduliftshows our continued desire toprovide our clients with the bestrange of products.
33 Modular Spreader Beams
Product Links SpecificationsSlings Shackle Up to 70t at 10.5m/33ftDigital Load Indicator Up to 14m/45ft lower capacity
MOD 70
Manufacturing & Supply
First Integrated Solutions are a leading
provider of high quality lifting
equipment. We can manufacture wire
rope slings to BS EN13414, BS
EN12079/DNV2.7-1 , DNV2.7-3 &
Indian Standard IS 2762. We can press
up to 128mm diameter rope.
Manufacturing Capabilities
• Wire Rope Slings (NORSOK, TALURIT &
FLEMISH) single, 2, 3, 4 or 5 leg.
• Wire Rope Grommets
• Shackle Fittings and Chain Systems
• Manual/Pneumatic Hoists.
• High Performance Rope
• Heavy Lift Rigging
• Rigging Lofts
34 Manufacturing & Supply
Wire Rope Slings
First Integrated Solutions offer a wide
range of wire rope & wire rope related
products & services. With modern and
fully equipped wire rope sling
manufacturing facilities, in both the
UK and Trinidad, we can manufacture
and supply these products and
services to the highest standard.
Manufacturing Capabilities
• Capacity to manufacture wire rope slings with
pressed end terminations from 3mm up to
128mm in diameter.
• Wire rope slings in full compliance with
BSEN13414 standard.
• External accreditation to DNVGL 2.7-1, DNVGL
2.7-3, IS2762 & NORSOK 002.
• Ability to provide wire rope slings in single,
double and multi leg configurations with or
without forerunners.
• Aluminium ferrule with or without thimbles,
Flemish steel sleeve with or without thimbles
and various types of resin poured sockets.
35 Wire Rope Slings
First Integrated Solutions offer a
unique and specialist service for
supplying high performance ropes. Our
system designers provide support &
guidance throughout the entire
process.
Manufacturing Capabilities
• First Integrated Solutions are a leading global
supplier of High Performance/Specialist rope
products.
• We stock specialised rope designs in fibre & steel
wire in a large range of sizes to satisfy time
sensitive client requests.
• We can accurately cut ropes to the required length
& fit them with a large range of end fittings, as
well as offering installation & maintenance
support.
• These HPR are ideal for lifting, mooring, & towing
operations in an offshore or marine environment.
• FIS rope products are the same as or equivalent to
OEM.
High Performance Ropes
36 High Performance Ropes
FIS can manufacture, supply, store & inspect
a wide range of heavy lift rigging. These
diverse range of products & services allows
us to support our customers with all their
heavy lift projects. From renewables to
decommissioning our customers can be
assured we have the experience & technical
expertise to support their requirements.
Manufacturing Capabilities
Ability to provide a wide range of products including:
• Large diameter wire rope
• Grommets
• Shackles
• Master Links
• Synthetic Slings
• Spreader Beams
• Spooling Services
We also store, manage & re-certify customers owned
heavy lift rigging equipment to facilitate a cost
effective re-use.
Heavy Lifting
37 Heavy Lifting
HAVS Management Services
HAVS Management Services
• On site & in-house HAVS
management & analysis
• HAVWEAR wrist monitor
• ATEX HAV meter,
providing real time
exposure information
Product Link
• HAVwear Wrist Monitor• ATEX HAV Meter
Specifications
• Creates analytics reports for managers to analyse
HAVS Analysis Software
Product Link
• HAVS Analysis Software• ATEX HAV Meter
Specifications
• Assesses vibration magnitude felt by user
HAVwear Wrist Monitor
Product Link
• HAVS Analysis Software• HAVwear Wrist Monitor
Specifications
• Monitors in real time workers exposure
ATEX HAV Meter
38 HAVS Management Services
Product Link
• HAVS Analysis Software• HAVwear Wrist Monitor
Specifications
• 4 & 15 capacity versions availsable
HAVwear Base Station
First Integrated Solutions are a leading provider of a range of inspection services. Offering an unrivalledquality service thanks to our multi-disciplined engineers, technical support team and our ability to find theoptimum solution to meet our customers needs.
• LOLER lifting equipment inspections- on & offshore, in house
refurbishments and inspection
• Wire rope NDT inspections
• Load testing facilities- 200t horizontal tensile test bed,
• 60t fixed boom crane, various test weights, water bags,
• load cells
• P.A.T. testing and HAV testing
• Inspection of portable electrical tools & appliances
• LEV & PSSR Inspections
39 Inspection Services
Inspection Services
40 Inspection Services
Inspection Services
Specialist Wire Rope Inspection
First Integrated Solutions is able to provide a range of inspection services including Specialist Wire Rope inspection and maintenance.
Our decades of experience within the lifting industry in combination with our wire rope manufacturing capabilities allows us to provide our clients with expert inspection services.
For more information or to book your Specialist Wire Rope inspection please get in touch.
41 Inspection Services
Inspection Services
Tensile and Compressive Force Testing
First Integrated Solutions is able to provide a range of inspection services including Tensile Testing, allowing you to evaluate materials and their properties.
Our in house 200 ton horizontal test bed allows our team of multidiscipline engineers to test tensile forces with an accuracy of plus/minus 2%. This allows them to identify faults and establish safe working limits.
For more information or to book your Tensile Force Test please get in touch.
42 Inspection Services
Inspection Services
Test Engineer Inspection
First Integrated Solutions is able to provide a range of inspection services including Test Engineer Inspections.
Our multi discipline team of test inspectors and decades of experience allow us to provide our clients with expert knowledge and skills.
For more information or to book your Test Engineer Inspection please get in touch.
43 Inspection Services
Inspection Services
Portable Appliance Testing Inspection
First Integrated Solutions is able to provide a range of inspection services including Portable Appliance Testing inspection and maintenance, onsite or in-house.
PAT Testing is essential for creating a safe working environment, our team of experienced inspectors can ensure that all electrical appliances are maintained and up to working standards.
For more information or to book your Portable Appliance Testing inspection please get in touch.
44 Inspection Services
Inspection Services
Lifting Equipment Plan, Installation & Mobilisation
First Integrated Solutions is able to provide a range of inspection services including Lifting Equipment Planning, Installation & Mobilisation.
Our decades of experience and multidiscipline team of lifting inspectors and technicians ensure that our clients receive the best in class service.
For more information or to book your Lifting Equipment Plan, Installation or Mobilisation please get in touch.
45 Inspection Services
Inspection Services
Pressure Systems Safety Regulation Inspection
First Integrated Solutions is able to provide a range of inspection services including Pressure Systems Safety Regulation inspection and maintenance, allowing you to comply with regulations and create a safe working environment.
Our team of experienced inspectors can ensure that your pressure systems are safe and fully comply with regulation.
For more information or to book your Pressure Systems Safety Regulation inspection please get in touch.
46 Inspection Services
Inspection Services
Local Exhaust Ventilation Inspection
First Integrated Solutions is able to provide a range of inspection services including Local Exhaust Ventilation inspection and maintenance, allowing you to minimise your exposure and create a safe working environment.
Effective cleaning and filtration of air is essential to maintaining a safe working environment, improper or ineffective equipment can lead to life threatening respiratory illnesses.
For more information or to book your Local Exhaust Ventilation inspection please get in touch.
Equipment Maintenance & Management
Service• FIS maintain, service & repair a
wide range of equipment.• Service centre for High Force,
Monti Bristle Blaster and Ridge Gear allowing us to service equipment in house.
Equipment Servicing, Refurbishment & Repair
Service• We offer storage & warehouse
services to our clients, as well as reports to identify the location & status of equipment
• FIS are constantly keeping abreast of technological advances & changes in relevant legislation to ensure our clients equipment is compliant
Asset Management, Monitoring, Control & Measurement
Service• Our advanced hire system
accurately tracks all our hire assets to ensure we can provide our clients with portal access to all equipment currently on hire to them.
• We can generate instant reports showing rental history, current deployment, & maintenance status of all FIS equipment.
Rental Asset Management Software
Service• Our cloud storage platform allows
our clients to gain immediate access to any documents required
• Clients simply login through our website to access their certification.
Cloud Documentation
47 Equipment Maintenance& Management
First Integrated in Numbers
• Over £5 million of sales and rental stock readily available.
• Over £4 million invested in new equipment in the last 5
years.
• Over 8000 pieces of equipment readily available.
• Over 80 employees devoted to helping our clients.
• Over 300 clients every year.
• 3 offices in Aberdeen, London & Trinidad.
48 FIS in Numbers
First Integrated in Numbers