Post on 15-Jul-2020
transcript
Sheet 1 of 2
DETAIL 01
KEY
DETAIL 02
DETAIL 03 DETAIL 04
©© Copyright Greensquares Products Ltd 2013
DETAIL 01
DETAIL 02
DETAIL 05DETAIL 03
DETAIL 04
DETAIL 07
DETAIL 06
Handrail
Handrail wall bracket
Handrail wall bracket mounted to wall. Wall to be drilled and plugged.
Wall mounted 'D' clamp.
Wall mounted 'D' clamp mounted to wall with M8 fixings (not supplied). Wall to be drilled and plugged.
10mm Toughened glass infill panel.
Handrail
Apply a bead of high strength retainer (supplied) to the male insert part of the fittings.
Handrail bracket to be attached to pre drilled holes in the handrail using stainless steel screws supplied.
Centre post
'D' clamp mounted to pre drilled post with fixings provided.
Baseplate to sit on and fix through slabs.
Baseplate fixed to slab using 3N° stainless steel M8x110mm resin anchor studs (not supplied). Holes to be pre drilled 10mm diameter, 80mm deep
Baseplate to be fixed with 2 holes to inside of balustrading and 1 hole to outside.
Data Sheet N° 204Stainless steel and glass balustrade with top handrail installation
on Solid Substructure
Top of glass to align with top of posts.
Sheet 2 of 2
DETAIL 05
KEY
DETAIL 06
DETAIL 07
Data Sheet N° 204Stainless steel and glass balustrade with top handrail installation
on Solid Substructure
©© Copyright Greensquares Products Ltd 2013
DETAIL 01
DETAIL 02
DETAIL 05DETAIL 03
DETAIL 04
DETAIL 07
DETAIL 06
Corner Post
Apply a bead of high strength retainer (supplied) to the male insert part of the fittings.
Handrail bracket to be attached to pre drilled holes in the handrail using stainless steel screws supplied.
Handrail corner connector.
Handrail End Cap
Apply a bead of high strength retainer (supplied) to the male insert part of the fittings.
Handrail bracket to be attached to pre drilled holes in the handrail using stainless steel screws supplied.
'D' clamp.
'D' clamp mounted to pre drilled posts with fixings provided.
10mm Toughened glass infill panels.
Top of glass to align with top of posts.