Post on 11-Sep-2018
transcript
2
alsan® flashing® · 10 years experience, 100 % reliability
100 %With Alsan® flashing®, SOPREMA offers an innovative and comprehensive response that guarantees extremely reliable waterproofing and eliminates the need for cap protections: no more weather strips, tuck-ins, caps...!
The 1st and only liquid waterproofing system for upstands with a European Technical Approval anda CSTB Technical Approval.The Alsan® flashing® liquid waterproofing process for
treating upstands has been awarded CE marking, via the European Technical Approval (ETA-08/0114) issued by
the EOTA (European Organisation for Technical Approvals).10 years of use and its 100 % reliability have truly set the seal
at European level on the reputation of the Alsan® Flashing® process, which offers roof-terrace waterproofing specialists a series of advantages.
flashing®
reliable
10 years experience, 100 % reliability · alsan® flashing®
3
10 years experience,100 % reliability
Alsan® flashing® + points+ Solution without cap protection+ No primer+ Adherence considerably better than traditional solutions+ 500 % elongation capacity+ Flame-free process+ Perfect adherence to the substrate+ Adapted to different types of substrates as well as complex shapes+ 100 % compatible with bitumen+ A SOPREMA Innovation+ CSTB Technical Approval+ European Technical Approval
POSSIBLE SUBSTRATESThe type of shapes are those usually acceptable
for upstands waterproofing (see DTU series 43), such as masonry, metal upstands, timber as well as insulation materials such as fibre-reinforced perlite, cellular glass…Other substrates: please, consult SOPREMA.
The substrate must be in good condition, clean, dry, free of any greasy substances.
PRESEnTATIOnAlsan® flashing® is a single-component bituminous
polyurethane resin which is applied in situ without a primer, using a roller or wide paintbrush.
InTEnDED USEThe Alsan® flashing® process can be used on all upstands
in new or renovation works. It is used in conjunction with SOPREMA waterproofing consisting of an SBS elastomer bitumen or a sandded or slate-coated APP main surface. Designed for terraces accessible to pedestrians or vehicles as well as non-trafficable and technical roofs.Its variant Alsan® flashing® garden is suitable for waterproofing items in direct contact with soil (green roofs, garden roofs, flower boxes, …) .
Alsan® flashing® on upstands Alsan® flashing® in gutters
■ Alsan® flashing in a gutter■
■ UGC Ciné Cité, La Défense, PARIS ■
relia4
alsan® flashing® · advantages
Alsan® flashing®bility
no more cap protections on roofs.The outstanding reliability of the Alsan® flashing® process means it can be used without any rainwater runoff device.This exclusive advantage means there is no need for:- masonry features such as drip caps or tuck-ins,- metal flashing strips,- but it also leads to genuine savings of up to 50 % compared to traditional upstands with a flashing strip, more in the case of masonry upstands (about 75 % when the drip cap is not glued).
advantages · alsan® flashing®
5
advantagesFIRE SAFE TOOMost fires start on upstands: upstands
under roof overhangs, at the bottom of shingles, underneath inflammable cupolas, on timber supports or panels made of wood derivatives, upstands on combustible insulation, upstands underneath an air intake, underneath glazing…Alsan® flashing® is a flame-free process that enables upstands to be treated safely anywhere where they constitute fire traps.
OUTSTAnDInG RELIABILITY- Perfect, permanent bonding to the substrate. Adherence
tests carried out in situ by SOPREMA’s Liquid Waterproofing department and laboratory on new and old flashing® sites were done in compliance with standard NF P 98-282. The results showed adherence performances considerably higher than with traditional processes: from 3 to 4 MPa compared to 0.5 MPa for welded membranes.- Liquid, it adapts to any type of shape.- Its elongation capacity of 500 % allows it to absorb movements without cracking.- Applied in one shot, Alsan® flashing® eliminates the lap joints required with sheet products.- The physico-chemical properties of Alsan® flashing® do not alter over time. It is UV-resistant and remains flexible even at low temperatures. No more delamination as with aluminium protection systems or unattractive wrinkling.
Allongement (%)
Essai à la compression de l'isolant en zone de relevé
Etatneuf
84 joursà 70°C
1000hUV
200
100
300
400
500
0
Flashing
250 kPa
Béton
Membrane bitumineuse
Isolant : laine minérale
Laboratory tests with a force of 250 kPa caused the destruction of theinsulation without any rupture in the Alsan® flashing® waterproofing. .
Excellent ageing behaviour confirmed by laboratory tests.
Elongation %
Brand new 84 days at 70°C
Compression tests on the insulationin the upstand area
Bituminous membrane
Insulation: mineral wool
Concrete
aesthetic6
alsan®flashing® · neatly finished upstands
alsan® flashing®
Aesthetics made to last.Time does not alter the appearance of Alsan® flashing®.It is formulated to last for years without any risk of delimination or wrinkling.
neatly finished upstands · alsan®flashing®
7
neatly finished upstands.
Alsan® flashing® can be left visible as it is UV-resistant. However, when the roof is visible, slate chippings - same colour
as the rest of the surface can be added to a layer of freshly applied Alsan® flashing®.The fact that there are no joints also guarantees a regular, homogeneous and attractive effect. The elimination of tuck-ins, drip caps or flashing strips also allows for greater architectural freedom : curves, pure lines.The result is distinctly better roof-terrace aesthetics.An aluminium finish can be obtained by applying a coat of Cural or a coloured finish in the shades in the Curfer range.
Alsan® flashing® : 5 and 15 kg cans
Alsan® flashing® garden : 5 and 15 kg cans
Renfort RS® : 0,10 m x 50 m
Slate chippings : 2 or 30 kg bags
Colours :
Curfer : 5 and 20 kg cans
Colours : grey, beige, green, brown and tile red
Cural : 1 and 25 kg cans
PACKAGING
Alsan® flashing® garden : with a root-resistant function !Thanks to its root-resistant components, alsan® flashing® garden is ideal for protecting any structure in direct contact with soil. It is intended particularly for upstands up to 50 cm high on garden terraces and Sopranature® green roof terraces and for flower boxes, as well as for waterproofing any emerging or below grade that need protecting against roots.
In the case of flower boxes, the whole surface, including the horizontal part, can be treated with Alsan® flashing® garden.
Flashing Jardin avec couche de finition en résine optionnelle
Pre-formed anglesCorners are quick and easy to treat, thanks to pre-formed external and internal angles.
Ardoisé gris Brun MatisseArdoisé noir
Ocre Van Gogh Sienne CézanneGris ChagallRouge Gauguin
Vert Véronese
Alsan® flashing® garden with optional resin finishing coat
Slate grey Slate black Veronese Green Matisse Brown
Van Gogh Ochre Gauguin Red Chagall Grey Cézanne Sienna
simpli8
alsan® flashing® · application
alsan® flashing®
city
Quick and easy to apply, with no primer.It is applied by waterproofing contractors. It is applied in accordance with the Technical Approvals/DTAs or the Technical Guidelines for Alsan® flashing ®- Alsan® flashing® garden approved by the SOCOTEC technical supervisor.
9
application.
SIMPLE, SPACE-SAVInG TOOLS
A SInGLE COMPOnEnT PRODUCTAlsan® flashing® comes ready to use and requires no mixing on
the worksite.
nO PRIMERAfter laying the bituminous waterproofing product on the main surface (a membrane that meets a Technical Approval or SOPREMA installation specifications), the upstand is treated with Alsan® flashing® without a primer.REMInDER: Alsan® flashing® must not be applied on top of existing primer.
A SIMPLE PROCESSThe Alsan® flashing® process consists of only 3 simple stages:• Preparation of the substrate (see preparatory work opposite)• Laying of the Renfort RS®, sticking it in the corners on top of an Alsan® flashing® coat (500 g/m2)• Two coats of Alsan® flashing® (Alsan® flashing® garden) (900 g/m2 + 700 g/m2).
RAPID POLYMERISATIOnAfter polymerisation under the effect of the ambient humidity, Alsan® flashing® forms a truly waterproof coating. Polymerisation generally takes between 2 and 5 hours per coat depending on the weather conditions.
PRACTICAL RAIn PROTECTIOnThe structure is protected against the rain as soon as the Renfort RS® is laid and impregnated.
preparatory workAlthough no primer is needed, the substrate
must still be clean and dry, and haveundergone some preparatory work:
- remove dust from wooden substrates,- remove grease from metal upstands,- trim any aluminium or stainless steel
reinforcements,- sweep away any loose slate chippings using
a metal brush for membranes with mineral protection,
- sweep away any loose sand for sanded membranes,
- remove any thermofusible film.
SOLUTIOn FOR BELOW GRADE USInG FLASHInG GARDEn AT THE EnD OF THE WIDTH1. Reinforcement veil glued down with Alsan® flashing® garden + 2 coats of Alsan® flashing® garden2.Curfer (optional finish)
application · alsan® flashing®
without10
alsan® flashing® · application
alsan® flashing®
primerCSTB Technical ApprovalAdopted by most waterproofing contractors across Europe as soon as it was launched, Alsan® flashing has already been used to treat more than 1 million linear metres of upstands.The unique performances offered by Alsan® flashing® have been recognised by the CSTB since 2005, as attested by the élastophène flam/sopralène flam TechnicalApproval, and the Two-layer soprafix Technical Approval awarded in 2006. Other applications are detailed in a set of Technical Guidelines approved by the SOCOTEC technical center.
application · alsan® flashing®
11
application.
H
5 cmenv.
5 cmenv.
H = conforme au DTU15 cm mini
Relevé Flashing 2 couches 900 g/m2 + 700 g/m2
Renfort par Voile Flashing collé à l’aide de Flashing (500 g/m2)
Remplissage éventuel par Flashing + sable fin
Etanchéité bitumineuse de la partie courante
Elément porteur
Apply the first coat of Alsan® flashing® (900 g/m2).
Remove slate chippings with a metal brush.
Apply the second coat of Alsan® flashing® (700 g/m2).
Glue down the Renfort® RS Reinforcement veil (10 cm wide) with Alsan® flashing® (500 g/m2).
Finish by applying coloured slate chippings with a float (optional).
FLASHInG
In 5 STAGES
LAY THE REnFORT RS® VEILTo lay the veil, from experience
we recommend applying it in strips at most 5 m long in order to be able to position it on a fresh coat of product.
RECOMMEnDATIOnAlsan® flashing should be used
at temperatures between +5°C and +35°C. Veils and cans should be held in a cool, dry place before use.
TIPFor a perfect finish line on the
upstand, a simple strip of painter’s tape will help you obtain a crisp, straight line.
1 millionoverlinear meters
Upstand treated with Alsan® flashing®, 2 coats 900 g/m2 + 700 g/m²
Reinforcement with Renfort RS® veil glued down with Alsan® flashing® (500 g/m2)
Possible filling with Alsan® flashing® + fine sand
Bituminous waterproofing membrane on the main surface
Bearing part
approx
H = meets the Technical Guidelines15 cm minimum
14 rue de Saint-Nazaire - BP 6012167025 STRASBOURG Cedex 1
Tel. : +33 (0)3 88 79 84 84 - Fax : +33 (0)3 88 79 84 85e-mail : export@soprema.com - www.soprema.com
Serv
ice
Com
mun
icat
ion
Nouv
elle
doc
umen
tatio
n -
DC 1
0/02
6_EN
SOPREMA ExportYou are looking for further information?Do not hesitate to contact us:
Tel: +33 3 88 79 84 84E-mail: export@soprema.com
For all information concerning Alsan® flashing® and Alsan® flashing® garden go to www.soprema.com
SOPREMA SAS w i th a cap i ta l o f 51 550 000 E . Headquar te rs : 14 rue de Sa in t -Naza i re - BP 60121 - 67025 STRASBOURG Cedex 1 . RCS: 485 196 877.SOPREMA reserves the right, according to the evolution of its knowledge and techniques, to modily the composition and the utilization conditions of its materials and consequently their prices, without prior notice. Therefore, all orders will be accepted only in accordance with the conditions and technical specifications in force on the day the order is received.