Post on 24-Jun-2015
transcript
A Pacific Northwest based Industry-leading tapered tubular
steel utility manufacturer providing products engineered to provide exceptional durability in
any environment.
Pacific Steel Structures, LLC.
Company BackgroundFounded in 2009Headquartered in Spokane Valley, WAWoman Owned BusinessSales Offices : Distributor & Rep Sales Network Manufacturing: Engineered Poles are built in Tualatin, OR or Gómez Palacio, Durango, MexicoDistribution, Light Duty or Wood Equivalents are built in Gómez Palacio, Durango, MexicoWide Flange/ Tube Steel in Spokane, WA & Tualatin, OR
Pacific Steel Structures and its partners have a combined 50+ years experience in the utility industry. Our partnerships blend professional engineering, custom analysis software, and precision manufacturing together to provide you a cutting edge supplier.
PSS
HW Metals WSC
Who Are We?
Pacific Steel Structures, LLC is the Pacific Northwest’s newest solution for tapered tubular steel utility structures. We are based in the Pacific Northwest to serve the West Coast. Our extensive product lines cover tapered tubular steel transmission poles, substation structures, and substation low-side support structures. Our dedication to customer service will make us the leader in the tapered tubular steel utility products, where customer satisfaction is our highest priority.
Pacific Steel Structures Warranty
Pacific Steel Structures warrants that its poles and structures are free from material and workmanship defects for a period of 3 years.
The rest of the utility structures industry only warrants their products for One Year.
Full Line of Tapered Tubular Steel Structures from 69KV to 500KV
Transmission Applications
Substation Applications
Light Duty Steel Poles
Engineered Transmission Poles
Steel H-Frame Poles
Tapered Tubular & Wide Flange or Tube Steel Structures
Dead End Structures A-Frames and H-Frames
Low Side Supports – Buss, Switch, and Other equipment
Static and Shield Wire Poles
Utility Structures Finishes & Foundations
Available Finishes
Galvanized per ASTM A123
COR-TEN® Weathering Steel
Paint Over Galvanized, Paint over black steel.
Powder Coating
Available Foundation Types
Direct Embedment
Anchor Bolt/Base Plate
Vibratory Steel Caisson
Engineering provided by
All structures designed in accordance with ASCE–SEI 48-05. Design of Steel Transmission Poles
Analysis using PLS Pole software and detailing using Solid Works and Auto Cad.
We can provide foundation designs of all types on all structures
Professional Engineering Licenses in all 50 states
Transmission Structures
H-Frame Transmission LineSingle Pole with Davit Arms
Our Partner for Wood Equivalent or Distribution Steel Poles
METALPOL is a Mexican company with more than 50 years of experience in the manufacturing of metal products, for the past 15 years solely to the manufacturing of steel poles.
METALPOL offers a wide range of steel pole products: area, roadway, high-mast and decorative lighting poles; utility distribution and transmission poles; wireless communication monopoles; traffic-signal poles; custom-designed poles.
At METALPOL our mission is:• To offer high-quality products along with excellent service and thus become our customers’ best option in the steel pole industry.
• To provide complete satisfaction to our clients and to our employees and their families.
• To maintain an efficient manufacturing process, thus enabling us to have competitive prices and a profitable operation.
Standard Accessories: Optional Accessories: Materials: ASTM-A572 or A588Bearing Plate Base Plate & Anchor Bolts Galvanizing: ASTM-A123Grounding Nut Bolt on Hardware Embedment: 10% of pole length plus 2 feetPole Cap Climbing Provisions Anchor Bolts: ASTM-A615, Grade 75Jacking Nuts Corrocoate II or Equivalent CoatingGround Sleeve Grounding Pads
Painting or Powder Coating
Catalog
Number
Pole Height
(ft.)
Top O.D.
(in.)
Bottom O.D.
(in.)
Gnd Line Dia.
(in.)
Ulitimate
Moment Capacity
@ Ground Line (ft.-
kips) Taper Plate Thickness
Pole Weight
(lbs.)
Yield
Strength
PSS-H1-90 90 8.30 20.07 18.59 263.00 0.135"/ft. 3/16" 2722.00 65 KSI
PSS-H1-80 80 8.30 19.40 17.98 247.30 0.135"/ft. 3/16" 2515.00 65 KSI
PSS-H1-70 70 8.30 17.37 16.16 200.50 0.135"/ft. 3/16" 1938.00 65 KSI
PSS-H1-60 60 8.30 16.02 14.94 169.60 0.135"/ft. 3/16" 1581.00 65 KSI
PSS-H1-50 50 8.30 14.67 13.73 138.90 0.135"/ft. 3/16" 1261.00 65 KSI
PSS-H2-100 100 8.60 23.35 21.49 348.00 0.155"/ft. 3/16" 3529.00 65 KSI
PSS-H2-90 90 8.60 22.17 20.47 310.90 0.155"/ft. 3/16" 2955.00 65 KSI
PSS-H2-80 80 8.60 20.62 19.07 274.00 0.155"/ft. 3/16" 2507.00 65 KSI
PSS-H2-70 70 8.60 19.07 17.68 237.30 0.155"/ft. 3/16" 2091.00 65 KSI
PSS-H2-60 60 8.60 17.52 16.28 200.80 0.155"/ft. 3/16" 1709.00 65 KSI
PSS-H3-100 100 9.10 25.35 23.31 407.10 0.170"/ft. 3/16" 3851.00 65 KSI
PSS-H3-90 90 9.10 24.02 22.15 363.70 0.170"/ft. 3/16" 3192.00 65 KSI
PSS-H3-80 80 9.10 22.32 20.62 320.70 0.170"/ft. 3/16" 2706.00 65 KSI
PSS-H3-70 70 9.10 20.92 19.09 277.80 0.170"/ft. 3/16" 2256.00 65 KSI
PSS-H3-60 60 9.10 18.92 17.56 235.20 0.170"/ft. 3/16" 1843.00 65 KSI
PSS-H4-100 100 9.70 27.95 25.67 471.50 0.190"/ft. 3/16" 4192.00 65 KSI
PSS-H4-90 90 9.70 26.42 24.33 421.50 0.190"/ft. 3/16" 3494.00 65 KSI
PSS-H4-80 80 9.70 24.52 22.62 371.70 0.190"/ft. 3/16" 2959.00 65 KSI
PSS-H4-70 70 9.70 22.62 20.91 322.10 0.190"/ft. 3/16" 2465.00 65 KSI
PSS-H4-60 60 9.70 20.72 19.20 272.70 0.190"/ft. 3/16" 2011.00 65 KSI
PSS-H5-100 100 10.00 30.45 27.91 541.10 0.212"/ft. Varies 4543.00 65 KSI
PSS-H5-90 90 10.00 28.70 26.37 483.80 0.212"/ft. Varies 3745.00 65 KSI
PSS-H5-80 80 10.00 26.58 24.46 426.80 0.212"/ft. Varies 3165.00 65 KSI
PSS-H5-70 70 10.00 24.46 22.56 369.90 0.212"/ft. Varies 2630.00 65 KSI
PSS-H5-60 60 10.00 22.34 20.65 313.20 0.212"/ft. Varies 2139.00 65 KSI
PSS-H6-100 100 10.40 32.65 29.89 616.10 0.230"/ft. Varies 5095.00 65 KSI
PSS-H6-90 90 10.40 30.72 28.19 551.10 0.230"/ft. Varies 3991.00 65 KSI
PSS-H6-80 80 10.40 28.42 26.12 486.20 0.230"/ft. Varies 3370.00 65 KSI
PSS-H6-70 70 10.40 26.12 24.05 421.50 0.230"/ft. Varies 2799.00 65 KSI
PSS-H6-60 60 10.40 23.82 21.98 356.90 0.230"/ft. Varies 2274.00 65 KSI
Wood Equivalent Steel Poles
Ladder clip
Climbing ladder clips for ladders are furnished on one face of
the pole from approximately eight feet above the ground-line to
the top of the pole. In addition, working ladder clips will be
provided 180 degrees opposite to the climbing ladder clips on
the top section of two-piece poles, or a minimum of the top 25
feet for all poles.
POLE CAP
A steel pole cap is provided with a 3/8” x 1-
1/2” bolt, a 3/8” washer and a pole cap
support plate welded to the inside of the
pole, flush with the pole top.
STEP BOLTS
Standard step clips for 3/4” diameter step bolts are welded
to the pole from approximately 8feet above the ground-line
to the top of the pole. In addition, working step clips are
placed to provide safety and easy access to hardware.
GROUNDING NUT OR PAD
A 1/2” diameter heavy hex nut is provided for the
attachment of a ground wire to the pole or a one and
two hole NEMA grounding pads are available.
GROUND SLEEVE
A ground sleeve extending one foot above
and one foot below the ground-line.
BEARING PLATE
Direct embedded poles are provided with a bearing
plate welded to the base of the pole. The plate has
a 3/16” minimum thickness.
Jacking Nuts
Sets of 1 inch diameter heavy hex nuts are
standard. They are welded onto the pole to allow
for pulling points in the tightening of slip joint
connections.
Wood Equivalents Standard & Optional Accessories
Distribution Class Poles
We offer standard distribution poles with various heights and classes available for all distribution voltages. Our steel distribution poles are a cost-effective alternative to wood poles.
When all the costs are factored in (material, labor, transportation, installation, maintenance), most utilities have found steel poles to be between 7 to 30 % less expensive than wood poles.
Substation Dead-end Structures
A-Frame
H-Frame
Static Masts
Substation Equipment Supports
Switch Stand
Buss Support
Insulator Stands
Substation Structure Fabrication
Steel Fabrication per customer provided drawings of structures.
Complete design, certification, and fabrication of substation structures.
Fabrication using tapered
tubular, wide flange, or tube
steel.
Substation Structures
Substation Structures
Insulator Pedestals
Sectionalizing Switch Grounding Platforms
Wind Turbine Monopoles
Can support up to 20kW TurbinesVarious Heights AvailableSmall Footprint
Pole ManufacturingOur manufacturing partner is housed in a 140,000
square foot facility in Tualatin, OR
Our manufacturing partner is the only custom job shop in the country that can laser cut, high definition plasma burn, standard plasma burn, punch, form, and weld products to 60 feet in length.
Our manufacturing partner is an Association of American Railroads (AAR) approved fabricator and operates under the AAR Quality Assurance Standard.
Our manufacturing Partner employs an experienced sales staff trained in Cad Key, Solid Works, and shop equipment operation, providing valuable assistance in material and designapplication.
On site storage facilities
CuttingPlasma Tables
(1) 12′ x 80′ Sector High Performance Plasma Table(4 ) HPR 130 torches Cuts up to 1″ thick material (1) 10′ x 80′ Koike Aronson High Definition Plasma Table2 - HD 3070 torches Cuts up to 1/2″ thick material 1ea. 12′ x 80′ MG Industries Standard Plasma Table4 - HT 2000 torches Cuts up to 1″ thick material
Laser Table 1ea. 10′ x 60′ Prima Maximo2-D Laser Cutting System with 4000 Watt Co2 Slab Laser Cutting Thickness:
3/4″ Carbon Steel 1/2″ Stainless Steel 3/8″ Aluminum
Forming
(2) 30′ 1250 ton Cincinnati Press Brakes -With CNC Auto-form (Able to use as one tandem press, allowing a forming capacity of 60′ and 2500 tons 36″
throat depth)
Welding
All welders are certified to AWS D1.1Sub and Open Arc Automatic Beam Welder
Galvanizing
Kettle Size
Galvanized per ASTM A123.Maximum section length 43’ for single dip.
Post Galvanizing
Clean-Up
CorroCote® II or Equivalent Application
Pre-Shipment Final Inspection
Transportation
Transportation solutionsprovided by :
Providing our customers lower costs and timely delivery!
Why do business with Pacific Steel Structures, LLC.
Based in the Pacific Northwest (Corporate, Engineering, & Manufacturing).
Regionally Located for ease of quality inspections.
Woman Owned Business.
Customer Service Driven.
Competitive Pricing.
Reduced Structure Lead-Times (4-8 weeks).
Faster turn around on Engineering Drawings (10 days).
Reduced Transportation Cost (closer to our customer base).
Pacific Steel Structures, LLC.Customer References
Salem Electric, Salem, OR Bonneville Power Administration, Vancouver, WA Puget Sound Energy, Bellevue, WA HD Supply, Portland, OR Engineered Endeavors, Inc., Newburg, OH Tri Axis Engineering, Inc., Corvallis, OR New River Electric Corporation, Cloverdale, VA Eugene Water & Electric Board (EWEB), Eugene, OR ConocoPhillips, Wilmington, CA Energy Erectors, Inc., Las Vegas, NV The Industrial Company (TIC)-El Paso Electric, El Paso, TX Alcoa-Fluor Global Services-Chelan County PUD, Malaga WA Northwestern Energy, Billings, MT Central Lincoln PUD, Newport, OR
Pacific Steel Structures, LLC.19814 E Pheasant Dr.Greenacres, WA 99016Phone: (509)921-5835Fax: (509)921-5857
www.pacificsteelstructures.com