Post on 04-Jan-2022
transcript
PASSION FOR WATERJET CUTTING
WWW.STM.AT
02 | WWW.STM.AT
Our values.Our motivation.
Personally. Direct. Solution-oriented.
As an owner-managed family business, we are thinking long-term and sustainable. We therefore help our customers in all phases: From test cut to production consulting all the way to plant expansion, we are at your side with help and advice. Because together we can achieve more.
Partnership. Service. Trust.
Whatever you need, we make it possible. You can get operating supplies and spare parts directly and well-priced at the online shop. We will be happy to support you in production issues via remote maintenance and an STM technician can be on site quickly, if necessary.
Economical. Flexible. Innovative.
Thanks to the modular system, we can put together your personal dream system. The special feature is that you can also upgrade the plant without problem. The waterjet cutting technology opened undreamt-of possibilities and is a safe investment in the future.
Sustainability. Responsibility. Efficiency.
Innovation and resource-sparing production are more than just two catchwords. We specifically research and develop solutions in order to work more economical with active recycling while sparing the environment. That is not only good for the conscience, but also for the balance sheets.
WWW.STM.AT | 03
“Our goal is
to offer the best service
in the entire industry.”
Jürgen Moser, Managing Director
04 | WWW.STM.AT
HISTORY
Our passion: Waterjet cutting.
Simple solutions for complex tasks. That is the basic principle behind every STM waterjet cutting system. A success story since 1992.
STM Facts
Locations: STM Stein-Moser GmbH, Eben im Pongau, Austria STM Waterjet GmbH Germany, Schweinfurt, Germany
Employees: 45
Sales organisation: France, Belgium, Spain, Portugal, Netherlands, Denmark, Croatia, Russia, Switzerland
Export rate: 85%
It all started with a simple wish. There should really be an easier way. The family-owned stone masonry needed a waterjet cutting system for the elaborate cutting tasks. The system should be able to be operated by anyone without special skills, easy to service and be especially robust.
But what can you do if there is no system that meets the individual requirements? What we at STM always do when faced with a challenge: We develop our own concept, always want more and roll up our sleeves. The rest is history.
Since 1992, we have developed innovative waterjet cutting systems. As an owner-managed family business, we are thinking long-term and sustainable. We focus exclusively on the subject of waterjet cutting and offer our customers Austrian quality, in depth detailed knowledge and a partnership at eye level.
WWW.STM.AT | 05
1992Development of the first waterjet cutting
system
1999Establishment of
Maximator JET GmbH
2002100th waterjet cutting
system delivered
1974Establishment of STM
Stein-Moser GmbH
1997Start of the research
collaboration with the Fraunhofer
Institute
2000Start of the
cooperation with Maximator JET
GmbH
20115-axes waterjet
cutting with up to 68° STM 3D/68
2015Development of the
OneClean system
2017Maximator JET becomes STM
Waterjet GmbH Germany
2006The first
PremiumCut system was developed
2012Move to the new
company location in Eben im Pongau
2016STM angle error
compensation cutting head
TAC/12
“Water, pressure and sand.
That is how we make it possible.”
06 | WWW.STM.AT
STM research cooperations:
EUREKA Network for market-orientated research & development
Leibniz University Hanover Arbeitskreis Wasserstrahltechnologie - work group waterjet technology
Fraunhofer-Gesellschaft e.V. Promotion of the applied research
Hochschule Karlsruhe - Karlsruhe College Technology and economy
RESEARCH & DEVELOPMENT
Water is for cutting.
We are convinced of that: Waterjet cutting is the ultimate cutting technology. Cold cut, no material hardening, nearly all materials are cuttable and extremely energy- and cost-saving at that.
We therefore do everything to advance the technology and further explore the limits of what is feasible. Our own development department designs and researches for innovative solutions every day.
Together with our partners and renowned research institutions, we develop the waterjet cutting systems of the future today. Industry 4.0 is not just a catchword for us. STM waterjet cutting systems enable linked working, resource-sparing manufacturing and lean just-in-time production as well as small series production.
Using the waterjet cutting technology is a matter close to our hearts. We work with a number of educational institutions to give machine operators and the responsible parties of tomorrow an understanding of the advantages of waterjet cutting.
WWW.STM.AT | 07
“Versatile,
efficient and precise.
We live
waterjet cutting.”
08 | WWW.STM.AT
We build exactly the waterjet cutting system you need.
From a small 1x1 2D cutting system all the way to a 15x4 m system with multiple Z-axes and several 3D cutting heads. The intelligent, modular system combines the advantages of standard components with the high level of individualisation of our versatile configuration range. STM waterjet cutting systems can also be retrofit through a variety of tuning options. Your system thus grows with you.
Our systems cover the complete area of waterjet cutting. We offer you the entire range, from cutting system to software, trainings and operating supplies all the way to cleaning and recycling systems.
STM MODULAR SYSTEM
Just the way you want it.
AUS TRIA N QUALITY
European top quality and brand components
MODULAR SYSTEM
Customizable and economical
LIGHTWEIGHT DESIGN SYSTEM
Stainless steel and aluminium structure
SIMPLE TO USE PRINCIPLE
Easy to service, concealed linear guides, no bellows
WWW.STM.AT | 09
We build exactly
the waterjet cutting system
you need.
STM 2D HEAD
Standard cutting head
STM TAC/12
Taper angle control cutting head
STM 3D 48°/68°
5 axes 3D cutting head
TubeCut
Pipe cutting module
Cutting heads and modules
OneClean
The modular all-round system:
Hydro filter and cleaning Water cycle system Abrasive recycling
Recycling and cleaning
EcoCut
The entry-level model
MasterCut
The all-rounder
PremiumCut
The high-end system
MicroCut MJ
The specialist for precision
Series
10 | WWW.STM.AT
Easy to operate, easy to service and simply that crucial step ahead. STM waterjet cutting systems are developed with the focus on the user. It is therefore important that our systems are safe and provide the highest ease of use. STM waterjet cutting systems have a compact, user-friendly structure made up of three elements: Cutting table, control unit and high-pressure pump. These three units are perfectly connected in terms of looks and function.
Independently from the model, all constructive components and screws are made from stainless steel or aluminium. Characteristic features are a flat bottom as well as the smooth side walls with concealed linear guides without bellows and a high-pressure pipe fed through the axes.
The fully digital drive consists of brushless AC servo motors with multi-axes NUM CNC control. The corresponding software runs on MS Windows and requires only a standard computer.
Easy access and easy to clean
CONCEALED L INEAR GUIDING –
NO BELLOWS
Accessible all-aroundWORK SURFACE ACCESSIBLE
FROM 3 S IDES
To-the-gram and low-maintenance
ABRASIVE DOSING SYSTEM
SIMPLE TO USE PRINCIPLE
Cutting can be that easy.
WWW.STM.AT | 11
STM SmartCut, the all-round cutting software for waterjet cutting.
STM SmartCut is the central part of each STM waterjet cutting system. The software is a full program for creating or importing drawings for setting process-specific parameters for the waterjet. The special feature is that the application does not require special CNC or EDP knowledge. Use the full flexibility of the waterjet because STM SmartCut simplifies operation through suggested strategies and an intuitive user interface. STM SmartCut communicates directly between waterjet cutting system and a standard office computer as CNC control unit and enables fast processing of cutting orders.
The software determines all parameters from pump pressure to abrasive dosing all the way to cutting speed. The stored material database is continuously updated and the cutting strategies allow you to cut even the most complicated component. And all of this so that you can get perfect results as fast as possible. And if you do want to refine something, the software allows you to make all the settings yourself.
Overview of functions
• Intuitive user interface on a standard office computer
• No special CNC or EDP knowledge required
• Direct realisation of the diagram shown on the screen
• Pre-defined cutting strategies and material database
• Automatic setting of pump pressure and abrasive quantity
• Calculation module for estimated processing time and exact costs of an order including printable report
• Remote maintenance by the STM team via remote access
• Large selection of add-on modules
SOFTWARE
STM SmartCut – The central partof your cutting system.
“The focus
is on the user.”
12 | WWW.STM.AT
When or where does not matter. We are always there for you, give our all to tackle your issues and are on your side with help and advice.
STM services
Trainings and production consulting
Annual service and machine maintenance Remote maintenance and online trainings
SERVICE AND CONSULTING
You can rely on us.
The most important thing about a waterjet cutting system is that it cuts. Preferably all the time. We therefore do our utmost to offer our customers perfect service. Starting with training to comprehensive telephone support all the way to complex production consulting. Best possible service to us means that we are glad to give advice on technical problems fast, competent and friendly. Because no distance is too far and no problem too complicated for our service engineers.
You can get spare parts and operating supplies fast and without complications at the STM online shop. And when things do get complicated, our service engineers are ready to offer you solutions for your production issues. We will be happy to support you with preliminary calculations and profitability analyses.
SERVICE AND CONSULTING
You can rely on us.
Remote maintenance. Telephone support
24H SUPPORT AND HOTLINE
Online Shop
ACCESSIBLE 24/7 AND CLEARLY STRUCTURED
Guaranteed supply
SPARE PARTS GUARANTEE FOR 10 YEARS
WWW.STM.AT | WWW.STM-WATERJET.DE | 13
14 | WWW.STM.AT
We always have a sympathetic ear for our customers. And we love finding solutions together and making them reality.
More than 700 systems word-wide already speak volumes. It is our goal to communicate with our customers at eye level. That is why we are represented in a variety of industries and like to share our specialised knowledge with you.
PARTNERSHIP AND REFERENCES
Successful together.
WWW.STM.AT | 15
PARTNERSHIP AND REFERENCES
Satisfied customers world-wide.Metalworking / Mechanical engineering Metalworking / Mechanical engineering Metalworking / Mechanical engineering
Materials / Sealing industry Materials / Sealing industry
www.kraess.de
Glass
Stone Stone Research / Schools
Research / Schools Research / Schools Research / Schools
Plastic
einfach passgenau
Plastic Plastic
Custom cutting Custom cutting Custom cutting
Subject to technical modifications and error. STM 02/2018
Gewerbegebiet Gasthof Süd 1785531 Eben im Pongau, Austria
WATERJET SOLUTIONSSTM Stein-Moser GmbH
T: +43 (0) 64 58 200 14-0E: info@stm.at
W: www.stm.atUID: ATU 35291607