Post on 15-May-2015
description
transcript
An Ultimate POS
Terminal Security Solution
Designed and Introduced by
Terminal
Smart Sensors To Secure Your Terminals
11 22
33
44
LEADS
MOUNTING SENSOR
INTERNAL ALARM
SPEAKER ON/OFF KEY PORT
POWER CONNECTION
LIGHT INDICATORS
Stand Alone System
Stand Alone Alarm System Overview
Power Connection
Terminal Device
Plug In Power Cable
STEP 1
Green Light Indicates That Sensor Is Now Active
STEP 1
Red light will indicate nextsensor to fasten
STEP 1
Fasten Lead ThroughStand Into Device
STEP 2
Green Light Indicates That Sensor Is Now Active
STEP 2
Red Light Indicates Next Sensor Is Ready To Fasten
STEP 2
Fasten Lead Through Stand Into Device
STEP 3
Green Light Indicates That Sensor Is Now Active
STEP 3
Red Light Indicates Next Sensor To Fasten
STEP 3
Fasten Security Screw Through Alarm Unit Into Stand
STEP 4
Green Light Indicates That Sensor Is Now Active
STEP 4
STEP 5
Turn Key to activate alarm
Alarm Is Now Activated
SECURED?
YES!!
PAYMATE SECURED Terminal
Tampering with the cable?
Loosening the screws?
Disconnecting power?
Loosening of the mounting screw?
Multiple Payment Terminals?
MULTIPLE ALARM UNIT HUB SYSTEM
Connect Up to Four Alarms
Multiple Alarm Unit Hub System Overview
Central monitoring system
Security Panel
Terminal 2
Terminal 3
Terminal 1
Order through email, phone or visit
Bilingual helpdesk to answer all your queries
Complete Solution – Stands, Alarms & Installation
Customized warranties
Questions?