Post on 03-Nov-2014
transcript
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
EXAMPLE OF HOW TO CREATE AN STRUCTURAL PROFILEIN PARAGON USING PDMS 12
See also: CATALOGS AND SPECIFICATIONS USER GUIDES- CHAPTER 6 ADDITIONALSTEELWORK TOOLSYou can see more detailed explanations of commands
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
Open PARAGON / STEELWORKS
Select Create > Catalogue to open the Create Catalogue. Create a new Steelwork Catalogue in the database hierarchy with the purpose set to STL.
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
Select Create > Section to open the Create Section. Create a new Steelwork Section in thedatabase hierarchy with the purpose set to STL.
Select Create > Category for Profile. The Category for Profile form is similar in layout to astandard Create Category, but contains added sub forms specific to Steelwork Profiles
The model view appears
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
Create the parameters
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
You can rename all members automatically
In an text editor create a text with the dimensions of the profile as follows
Example.txt-----------------------------------------------------------------------------------------------------------------------NAME Gtype PA1 PA2 PA3 PA4EU-AOA-80x80x3 spro 80 80 3 7.26------------------------------------------------------------------------------------------------------------------------
Continue with the rest of parameters
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
Import
Search the txt file and continue
The SCOM has been loaded
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
Select one component in the lower window (became blue)Select GEOMETRY
The Geometry form will be opened
Fill as follow
When filled one row press NEW or COPY and fill the next
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
The profile shape now is created
Press OK
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
Now it's necessary to make a mirrored copy
Do as indicated
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
Now we need to create the P-lines
Fill as follow
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
Then NEW P-LINE and fill
APPLY
New P-line or copy
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com
AS INTEC -Juan Manuel Gutierrez tecnicojmg@gmail.com