PERGOLA 80x40 - Gaviota Simbac de prezentare... · • Like for ZEN system, Gaviota offers the...

transcript

PERGOLA 80x40

• Flat awning for terraces that lets you enjoy the outdoor and create new private spaces protected from the sun.

• Setting of various models according to the specific needs of each installation.

• Versatility• Adaptation to any kind of

space• Compatibility with perimetral

closing systems.

• Unique space full of light but with3% less heat

• Inclination of fabric (to drain thewater laterally).

• Like for ZEN system, Gaviota offers the possibility of installing an overhead canvas to protect and create a thermal insulation chamber.

Operation:

Motor cable ManualMotor cog belt

1. Between walls

Assembling options :

2. To ceiling (only manual)

3. To wall 1 level

4. To wall 2 levels

5. Pergola 1 level (motor cable or manual)

6. Pergola 2 levels (motor cable or manual)

7. To ceiling porche

HomologationWind resistance Class 3

Profiles and accessories

- Guide profile 80x40

- Telescopic sliding flange:

• Mín. A= 106mm • Máx. A= 157mm

80x40 manual

• Between walls• To ceiling• To wall 1 level• To wall 2 levels• To ceiling porche 1 level• To ceiling porche 2 levels• Pergola 1 level• Pergola 2 levels

- Double pulley- Corner double pulley

80x40 motorized cable

• Between walls• To ceiling• To wall 1 level• To wall 2 levels• Pergola 1 level, 2 levels• To ceiling porche 1 level• To ceiling porche 2 level

- Cut the tube 10 cm less thanthe istance between guides.

- Insert the aluminium pulleys

- Insert the motor and the cap

- Fix the bearing support

- Fix the motor support

- Put the tube between guides

- Put the frontal pulleys, their center has to coincide with the center of threaded pulleys.

- Take the fqabric profiles to the frontal part

- Put the cable fixation for the firstfabric profile and the steel cable.

- Provide current to the motor, turndirection for opening.

- Pass the cable into pulley.

- Make double turn with steel cable, keeping it in the closest way to the tubeside.

- Pass the cable to the tensor ring and fix it with screw.

- The cable has to be stretched first byhand, once it is done, we will stretch itwith the tensor, it has to be equal onboth sides.

80x40 motorized cog belt

• Between walls• To wall 1 level• To wall 2 levels

Maximum dimensions : 4 X 4 m

Motor: Cross 30/15 S45

Maximum dimensions: 6 X 4 m

Motor: Cross 40/15 S45

-Adjustable wall bracket

- Cog belt

Flat hood

• Between walls• To wall 1 level• To wall 2 levels• Pergola 1 level manual• Pergola 1 level motor cable

Flat hood Z

For motorized pergolas:• Zen Rain• Zen • 80x40 with cog belt

- Flad hood Z profile

- Flat hood Z lateral covers inclined

- Flat hood Z lateral covers

- Supports flat hood Z

- Rubber profile

Lattice

NOTA: Copyright GAVIOTA SIMBAC S.LLas fotografías, ilustraciones and textos de este catalogo son de propiedad de GAVIOTA SIMBAC S.L and pueden ser utilizados, copiados o reproducidos de ningún modo o por cualquier medio, salvo consentimiento expreso previo de GAVIOTA SIMBAC, S.L.

PERGOLA 80x40 - Gaviota Simbac de prezentare... · • Like for ZEN system, Gaviota offers the...

Documents