Post on 10-Sep-2018
transcript
Performance Curves (Metric)
Excellence at work. Excellence in life.
4300 Series
Iron Construction Standard Clearance
There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.
Created on November 30, 2000
25.4 mm Std. Port SizeModel 4302/4322
There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.
Created on November 30, 2000
Iron Construction Standard Clearance
Page 2 of 10
25.4 mm Std. Port SizeModel 4302/4322
There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.
Created on November 30, 2000
Iron Construction Standard Clearance
Page 3 of 10
31.75 mm Std. Port SizeModel 4303/4323
There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.
Created on November 30, 2000
Iron Construction Standard Clearance
Page 4 of 10
31.75 mm Std. Port SizeModel 4303/4323
There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.
Created on November 30, 2000
Iron Construction Standard Clearance
Page 5 of 10
Model 4304/432438.1 mm Std. Port Size
There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.
Created on November 30, 2000
Iron Construction Standard Clearance
Page 6 of 10
38.1 mm Std. Port SizeModel 4304/4324
There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.
Created on November 30, 2000
Iron Construction Standard Clearance
Page 7 of 10
38.1 mm Std. Port SizeModel 4305/4325
There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.
Created on November 30, 2000
Iron Construction Standard Clearance
Page 8 of 10
38.1 mm Std. Port SizeModel 4305/4325
There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.
Created on November 30, 2000
Iron Construction Standard Clearance
Page 9 of 10
50.8 mm Std. Port SizeModel 4306/4326
Created on November 30, 2000
There are many additional factors to consider when selecting a pump, including (but not limited to) suction conditions, temperature limitations and material compatabilities. Curve data is typical only, actual performance may vary. Consult the factory or an authorized Tuthill Pump Group representative for assistance.
Iron Construction Standard Clearance
Tuthill Pump Group12500 S. Pulaski Road, Alsip, IL 60803www.tuthillpump.com
Excellence at work. Excellence in life.
Model 4306/432650.8 mm Std. Port Size