Post on 21-Feb-2018
transcript
Edmonton, AB (Head Office)9211 - 41 Avenue NW780.438.6055
www.hitechseals.com92
Imperial SealsPiston Rings
Ring Materials: Temp. Range15% Glass filled PTFE -268°C to 288°C
40% Bronze filled PTFE -268°C to 288°C
40% Glass Reinforced Nylon -240°C to 149°C
15% Graphite Filled PTFE -72°C to 232°C
15% Glass, 5% Moly Filled PTFE -72°C to 260°C
25% Carbon Graphite Filled PTFE -268°C to 288°C
Loader Materials:Nitrile -40°C to 120°C
Viton®/Fluorocarbon -26°C to 204°C
Product Description:Piston rings are excellent for sealing in hydraulic and pneumatic cylinder applications. The piston ring provides an excellent low friction and strong chemical resistance. By changing the components’ materials we can change the temperature range, frictional characteristics, extrusion resistance and wearability of the piston seal.
Part Numbers:___ ___ ___ - ___ ___ ___ ___ ___ ___
O.D. Material
RPS - RectangularSPS - SquareAQ - AQ Seal
- CAT*
SCP - Step CutCI - Cast Iron
___ ___ ___ - ___ ___ ___ ___ ___ ___ ___
O.D. Width
Example: SPS - 4000 - 4.000” O.D. 15% glass filled PTFE Square Piston Seal with a -153 Nitrile O-ring Loader.
CAT* 2 PieceRectangular (RPS) Square (SPS) Step Cut (SCP)
*Caterpillar equivalent styleAQ Seal Cast Iron (CI)
Pis
ton
Rin
gs
Edmonton, AB (Head Office)9211 - 41 Avenue NW
780.438.6055www.hitechseals.com 93
Imperial Seals Piston Rings
Groove Dimensions Ring Dimensions
Part Number
ABore Diameter +0.025/-0.000
BWidth
CDepth O.D. Width C/S
LoaderDash No.
RPS 1000 1.000 0.125 - 0.128 0.155 - 0.157 1.030 - 1.036 0.116 - 0.121 0.067 - 0.073 -115RPS 1250 1.250 0.125 - 0.128 0.155 - 0.157 1.280 - 1.287 0.116 - 0.121 0.067 - 0.073 -119RPS 1500 1.500 0.125 - 0.128 0.155 - 0.157 1.530 - 1.539 0.116 - 0.121 0.067 - 0.073 -123RPS 1750 1.750 0.125 - 0.128 0.155 - 0.157 1.780 - 1.790 0.116 - 0.121 0.067 - 0.073 -127RPS 2000 2.000 0.125 - 0.128 0.155 - 0.157 2.030 - 2.042 0.116 - 0.121 0.067 - 0.073 -131RPS 2250 2.250 0.125 - 0.128 0.155 - 0.157 2.280 - 2.293 0.116 - 0.121 0.067 - 0.073 -135RPS 2500 2.500 0.125 - 0.128 0.155 - 0.157 2.530 - 2.547 0.116 - 0.121 0.067 - 0.073 -139
RPS 2750 2.750 0.125 - 0.128 0.155 - 0.157 2.780 - 2.796 0.116 - 0.121 0.067 - 0.073 -143
RPS 3000 3.000 0.278 - 0.280 0.278 - 0.280 3.030 - 3.048 0.269 - 0.274 0.087 - 0.093 -333RPS 3250 3.250 0.278 - 0.280 0.278 - 0.280 3.280 - 3.299 0.269 - 0.274 0.087 - 0.093 -335RPS 3500 3.500 0.278 - 0.280 0.278 - 0.280 3.530 - 3.551 0.269 - 0.274 0.087 - 0.093 -337RPS 3750 3.750 0.278 - 0.280 0.278 - 0.280 3.780 - 3.802 0.269 - 0.274 0.087 - 0.093 -339RPS 4000 4.000 0.278 - 0.280 0.278 - 0.280 4.030 - 4.054 0.269 - 0.274 0.087 - 0.093 -341RPS 4250 4.250 0.278 - 0.280 0.278 - 0.280 4.280 - 4.305 0.269 - 0.274 0.087 - 0.093 -343RPS 4500 4.500 0.278 - 0.280 0.278 - 0.280 4.530 - 4.557 0.269 - 0.274 0.087 - 0.093 -345RPS 4750 4.750 0.278 - 0.280 0.278 - 0.280 4.780 - 4.809 0.269 - 0.274 0.087 - 0.093 -347RPS 5000 5.000 0.278 - 0.280 0.278 - 0.280 5.030 - 5.060 0.269 - 0.274 0.087 - 0.093 -349RPS 5250 5.250 0.375 - 0.380 0.387 - 0.392 5.280 - 5.311 0.362 - 0.367 0.137 - 0.147 -425RPS 5500 5.500 0.375 - 0.380 0.387 - 0.392 5.530 - 5.563 0.362 - 0.367 0.137 - 0.147 -427RPS 5750 5.750 0.375 - 0.380 0.387 - 0.392 5.780 - 5.814 0.362 - 0.367 0.137 - 0.147 -429RPS 6000 6.000 0.375 - 0.380 0.387 - 0.392 6.030 - 6.066 0.362 - 0.367 0.137 - 0.147 -431RPS 6500 6.500 0.375 - 0.380 0.387 - 0.392 6.530 - 6.569 0.362 - 0.367 0.137 - 0.147 -435RPS 7000 7.000 0.375 - 0.380 0.387 - 0.392 7.030 - 7.073 0.362 - 0.367 0.137 - 0.147 -438RPS 7500 7.500 0.375 - 0.380 0.387 - 0.392 7.530 - 7.575 0.362 - 0.367 0.137 - 0.147 -440RPS 8000 8.000 0.375 - 0.380 0.387 - 0.392 8.030 - 8.078 0.362 - 0.367 0.137 - 0.147 -442RPS 8500 8.500 0.375 - 0.380 0.387 - 0.392 8.530 - 8.581 0.362 - 0.367 0.137 - 0.147 -444RPS 9000 9.000 0.375 - 0.380 0.445 - 0.450 9.030 - 9.081 0.362 - 0.367 0.195 - 0.210 -445RPS 9500 9.500 0.375 - 0.380 0.445 - 0.450 9.530 - 9.587 0.362 - 0.367 0.195 - 0.210 -446RPS 10000 10.000 0.375 - 0.380 0.445 - 0.450 10.030 - 10.090 0.362 - 0.367 0.195 - 0.210 -447RPS 11000 11.000 0.375 - 0.380 0.445 - 0.450 11.030 - 11.096 0.362 - 0.367 0.195 - 0.210 -449RPS 12000 12.000 0.375 - 0.380 0.445 - 0.450 12.030 - 12.102 0.362 - 0.367 0.195 - 0.210 -451
Loader information is available in the O-ring section, which starts on page 1.
Standard material: Bronze filled PTFE ring with a Nitrile loader.RPS Style - used in medium duty applications.
B
A
C
Rectangular
Pisto
n R
ing
s
Edmonton, AB (Head Office)9211 - 41 Avenue NW780.438.6055
www.hitechseals.com94
Imperial SealsPiston Rings
Loader information is available in the O-ring section, which starts on page 1.
Groove Dimensions Ring Dimensions
Part Number
DBore Diameter
± 0.001
A± 0.002
B± 0.002
C± 0.002
O.D.± 0.5%
C/S± 0.010
Loader Dash No.
SPS 0500 0.500 0.241 0.497 0.083 0.511 0.070* -009
SPS 0750 0.750 0.491 0.747 0.083 0.761 0.070* -013
SPS 1000 1.000 0.741 0.997 0.083 1.011 0.070* -017
SPS 1250 1.250 0.991 1.247 0.083 1.261 0.070* -022
SPS 1500 1.500 1.241 1.497 0.083 1.511 0.070* -025
SPS 1750 1.750 1.360 1.747 0.122 1.771 0.109 -125
SPS 2000 2.000 1.606 1.996 0.130 2.024 0.115 -129
SPS 2250 2.250 1.856 2.246 0.130 2.274 0.115 -133
SPS 2500 2.500 2.106 2.496 0.130 2.524 0.115 -137
SPS 2750 2.750 2.356 2.746 0.130 2.774 0.115 -141
SPS 3000 3.000 2.606 2.996 0.130 3.026 0.115 -145
SPS 3250 3.250 2.856 3.246 0.130 3.276 0.115 -149
SPS 3500 3.500 3.106 3.496 0.130 3.526 0.115 -151
SPS 3750 3.750 3.356 3.746 0.130 3.776 0.115 -152
SPS 4000 4.000 3.606 3.996 0.130 4.026 0.115 -153
SPS 4250 4.250 3.856 4.246 0.130 4.278 0.115 -154
SPS 4500 4.500 4.106 4.496 0.130 4.528 0.115 -155
SPS 4750 4.750 4.356 4.746 0.130 4.778 0.115 -156
SPS 5000 5.000 4.606 4.996 0.130 5.028 0.115 -157
SPS 5250 5.250 4.856 5.246 0.130 5.280 0.115 -158
SPS 5500 5.500 5.106 5.496 0.130 5.530 0.115 -159
SPS 5750 5.750 5.232 5.746 0.159 5.780 0.143 -251
SPS 6000 6.000 5.482 5.996 0.159 6.030 0.143 -253
SPS 6250 6.250 5.732 6.246 0.159 6.282 0.143 -255
SPS 6500 6.500 5.982 6.496 0.159 6.532 0.143 -257
SPS 6750 6.750 6.232 6.746 0.159 6.782 0.143 -258
SPS 7000 7.000 6.482 6.996 0.159 7.037 0.143 -259
Standard material: 15% glass filled PTFE ring with a Nitrile loader.SPS Style - used in light duty applications.
AB
C
D
Square
Pis
ton
Rin
gs
Edmonton, AB (Head Office)9211 - 41 Avenue NW
780.438.6055www.hitechseals.com 95
Imperial Seals Piston Rings
Groove Dimensions Ring Dimensions
Part Number
DBore Diameter
± 0.001
A± 0.002
B± 0.002
C± 0.002
O.D.± 0.5%
C/S± 0.010
Loader Dash No.
SPS 7250 7.250 6.732 7.246 0.159 7.286 0.143 -260
SPS 7500 7.500 6.982 7.496 0.159 7.537 0.143 -261
SPS 7750 7.750 7.232 7.746 0.159 7.789 0.143 -262
SPS 8000 8.000 7.482 7.996 0.159 8.040 0.143 -263
SPS 8250 8.250 7.732 8.246 0.159 8.291 0.143 -264
SPS 8500 8.500 7.982 8.496 0.159 8.543 0.143 -265
SPS 8750 8.750 8.232 8.746 0.159 8.794 0.143 -266
SPS 9000 9.000 8.482 8.996 0.159 9.045 0.143 -267
SPS 9250 9.250 8.732 9.246 0.159 9.296 0.143 -268
SPS 9500 9.500 8.982 9.496 0.159 9.546 0.143 -269
SPS 9750 9.750 9.232 9.746 0.159 9.799 0.143 -270
SPS 10000 10.000 9.482 9.996 0.159 10.050 0.143 -271
SPS 10250 10.250 9.732 10.246 0.159 10.301 0.143 -272
SPS 10500 10.500 9.982 10.496 0.159 10.550 0.143 -273
SPS 10750 10.750 10.232 10.746 0.159 10.804 0.143 -274
SPS 11000 11.000 10.482 10.996 0.159 11.055 0.143 -275
SPS 11500 11.500 10.982 11.496 0.159 11.558 0.143 -276
SPS 12000 12.000 11.482 11.996 0.159 12.060 0.143 -277
SPS 13000 13.000 12.482 12.996 0.159 13.065 0.143 -278
Loader information is available in the O-ring section, which starts on page 1.
Square
Pisto
n R
ing
s
Edmonton, AB (Head Office)9211 - 41 Avenue NW780.438.6055
www.hitechseals.com96
Imperial SealsPiston Rings
Part Number
Nominal Dimensions Groove Dimensions
O.D. C/SDepth+0.000-0.002
Width+0.005-0.000
SCP 2000282 2 9/32 0.269 0.282
SCP 2250282 2 - 1/4 9/32 0.269 0.282
SCP 2500282 2 - 1/2 9/32 0.269 0.282
SCP 2500312 2 - 1/2 5/16 0.296 0.312
SCP 2750282 2 - 3/4 9/32 0.269 0.282
SCP 3000282 3 9/32 0.279 0.282
SCP 3000312 3 5/16 0.296 0.312
SCP 3250282 3 - 1/4 9/32 0.279 0.282
SCP 3500282 3 - 1/2 9/32 0.279 0.282
SCP 3500312 3 - 1/2 5/16 0.296 0.312
SCP 3750282 3 - 3/4 9/32 0.279 0.282
SCP 4000282 4 9/32 0.279 0.282
SCP 4000312 4 5/16 0.296 0.312
SCP 4250282 4 - 1/4 9/32 0.279 0.282
SCP 4500282 4 - 1/2 9/32 0.279 0.282
SCP 4500312 4 - 1/2 5/16 0.296 0.312
SCP 4500375 4 - 1/2 3/8 0.380 0.377
SCP 5000282 5 9/32 0.279 0.282
SCP 5000375 5 3/8 0.380 0.377
SCP 5250375 5 - 1/4 3/8 0.380 0.377
SCP 5500375 5 - 1/2 3/8 0.380 0.377
SCP 6000375 6 3/8 0.380 0.377
SCP 6500375 6 - 1/2 3/8 0.380 0.377
SCP 7000375 7 3/8 0.380 0.377
SCP 7500375 7 - 1/2 3/8 0.380 0.377
SCP 8000375 8 3/8 0.380 0.377
SCP 8500375 8 - 1/2 3/8 0.380 0.377
SCP 9000375 9 3/8 0.438 0.377
SCP 9500375 9 - 1/2 3/8 0.438 0.377
SCP 10000375 10 3/8 0.438 0.377
SCP 12000375 12 3/8 0.438 0.377
SCP - ___ ___ ___ ___ ___ ___ ___
O.D. Width
Standard Material: 40% glass reinforced Nylon ring and a 90 Durometer Peroxide cured oval Nitrile O-ring.
SCP Style - Can withstand much higher pressure than RPS and SPS designs. The SCP style also provides easier installation because of the split profile.
Additional sizes and dimensional information is available through a Hi-Tech Seals’ sales representative.
O.D.
C/S
Step Cut
Pis
ton
Rin
gs
Edmonton, AB (Head Office)9211 - 41 Avenue NW
780.438.6055www.hitechseals.com 97
Imperial Seals Piston Rings
Part Number CAT Number O.D. Height LengthCAT 3000 6J1972 3.000 0.285 - 0.289 0.185 - 0.190
CAT 4000 5J5402 4.000 0.355 - 0.359 0.250 - 0.255
CAT 4500 5J4986 4.500 0.355 - 0.359 0.250 - 0.255
CAT 5500 5J4988 5.500 0.420 - 0.424 0.375 - 0.380
CAT 6000 5J4989 6.000 0.490 - 0.494 0.375 - 0.380
CAT 6250 5J4990 6.250 0.490 - 0.494 0.375 - 0.380
CAT 6500 5J4991 6.500 0.490 - 0.494 0.375 - 0.380
CAT 7000 5J4997 7.000 0.475 - 0.479 0.375 - 0.381
CAT 8250 5J5559 8.250 0.535 - 0.539 0.375 - 0.380
CAT - ___ ___ ___ ___
O.D.
Hi-Tech Seals’ Caterpillar parts are not original equipment parts. Caterpillar part numbers are only provided as a reference.
CAT
Pisto
n R
ing
s
Edmonton, AB (Head Office)9211 - 41 Avenue NW780.438.6055
www.hitechseals.com98
Imperial SealsPiston Rings
(E)
Seal Dimensions Dash No. Gland DimensionsDiametrical Clearance**
Part Number*
GlandO.D.
C/S ± 0.003
Height (Axial)
O.D. Loader
I.D. Loader
I.D.Axial
Height(W)
Radial Height
(L)Radius
(R)1000 PSI
3000 PSI
AQ 2000 2 0.130 0.285 -031 -324 1.384 0.288/0.293 0.308 0.025 0.024 0.008
AQ 2250 2 - 1/4 0.130 0.285 -032 -326 1.634 0.288/0.293 0.308 0.025 0.024 0.008
AQ 2500 2 - 1/2 0.130 0.285 -034 -328 1.884 0.288/0.293 0.308 0.025 0.024 0.008
AQ 2750 2 - 3/4 0.130 0.285 -036 -330 2.134 0.288/0.293 0.308 0.025 0.024 0.008
AQ 3000 3 0.130 0.285 -038 -332 2.384 0.288/0.293 0.308 0.025 0.024 0.008
AQ 3500 3 - 1/2 0.130 0.285 -041 -336 2.884 0.288/0.293 0.308 0.025 0.024 0.008
AQ 4000 4 0.130 0.285 -043 -340 3.384 0.288/0.293 0.308 0.025 0.024 0.008
AQ 4500 4 - 1/2 0.130 0.285 -045 -344 3.884 0.288/0.293 0.308 0.025 0.024 0.008
AQ 5000 5 0.130 0.285 -047 -348 4.384 0.288/0.293 0.308 0.025 0.024 0.008
AQ 5500 5 - 1/2 0.187 0.370 -252 -426 4.660 0.375/0.380 0.420 0.035 0.030 0.010
AQ 6000 6 0.187 0.370 -256 -430 5.160 0.375/0.380 0.420 0.035 0.030 0.010
AQ 6500 6 - 1/2 0.187 0.370 -259 -434 5.660 0.375/0.380 0.420 0.035 0.030 0.010
AQ 7000 7 0.187 0.370 -261 -437 6.160 0.375/0.380 0.420 0.035 0.030 0.010
AQ 7500 7 - 1/2 0.187 0.370 -263 -439 6.660 0.375/0.380 0.420 0.035 0.030 0.010
AQ 8000 8 0.187 0.370 -265 -441 7.160 0.375/0.380 0.420 0.035 0.030 0.010
AQ 8500 8 - 1/2 0.187 0.370 -267 -443 7.660 0.375/0.380 0.420 0.035 0.030 0.010
AQ 9000 9 0.187 0.370 -269 -445 8.160 0.375/0.380 0.420 0.035 0.030 0.010
AQ 9500 9 - 1/2 0.187 0.370 -272 -446 8.660 0.375/0.380 0.420 0.035 0.030 0.010
AQ 10000 10 0.187 0.370 -273 -447 9.160 0.375/0.380 0.420 0.035 0.030 0.010
The above chart represents our standard sizes. Custom sizes are available upon request. For pressures exceeding 3000 PSI consult a Hi-Tech Seals’ sales representative.
O.D. I.D.
L
EW
Standard Material: 40% bronze filled PTFE with two Nitrile quad O-rings.
AQ Seal - commonly used in piston accumulators and medium duty hydraulic cylinders
AQ Seals
Pis
ton
Rin
gs
R
Edmonton, AB (Head Office)9211 - 41 Avenue NW
780.438.6055www.hitechseals.com 99
Imperial Seals Piston Rings
A B C W D R E
Part Number
SealO.D.
Seal Width Seal C/S Split Gap Groove Width Min. Groove Depth
Groove Root
Radius
Max. Extrusion
GapMin. Max. Min. Max. Min. Max. Min. Max.CI 1500 1.500 0.123 0.124 0.052 0.067 0.005 0.015 0.126 0.128 0.082 0.010 0.018
CI 1625 1.625 0.123 0.124 0.056 0.071 0.005 0.015 0.126 0.128 0.086 0.010 0.019
CI 1750 1.750 0.123 0.124 0.060 0.075 0.005 0.015 0.126 0.128 0.090 0.010 0.020
CI 1875 1.875 0.123 0.124 0.060 0.075 0.005 0.015 0.126 0.128 0.090 0.010 0.020
CI 2000 2.000 0.123 0.124 0.060 0.075 0.005 0.015 0.126 0.128 0.090 0.010 0.020
CI 2250 2.250 0.186 0.187 0.070 0.085 0.005 0.015 0.189 0.191 0.100 0.010 0.023
CI 2375187 2.375 0.186 0.187 0.076 0.091 0.005 0.015 0.189 0.191 0.106 0.010 0.025
CI 2500 2.500 0.186 0.187 0.082 0.097 0.005 0.015 0.189 0.191 0.112 0.010 0.027
CI 2500125 2.500 0.123 0.124 0.082 0.097 0.005 0.015 0.126 0.128 0.112 0.010 0.027
CI 2625 2.625 0.186 0.187 0.087 0.102 0.005 0.015 0.189 0.191 0.117 0.010 0.028
CI 2750 2.750 0.186 0.187 0.091 0.106 0.005 0.015 0.189 0.191 0.121 0.010 0.030
CI 2750125 2.750 0.123 0.124 0.091 0.106 0.005 0.015 0.126 0.128 0.121 0.010 0.030
CI 2875 2.875 0.186 0.187 0.093 0.108 0.005 0.015 0.189 0.191 0.123 0.010 0.030
CI 3000 3.000 0.186 0.187 0.095 0.110 0.005 0.015 0.189 0.191 0.125 0.010 0.031
CI 3000125 3.000 0.123 0.124 0.095 0.110 0.005 0.015 0.126 0.128 0.125 0.010 0.031
CI 3000250 3.000 0.248 0.249 0.095 0.110 0.005 0.015 0.251 0.253 0.125 0.010 0.031
CI 3000312 3.000 0.310 0.311 0.095 0.110 0.005 0.015 0.313 0.315 0.125 0.010 0.031
CI 3250 3.250 0.186 0.187 0.103 0.118 0.005 0.015 0.189 0.191 0.133 0.010 0.033
CI 3250125 3.250 0.123 0.124 0.103 0.118 0.005 0.015 0.126 0.128 0.133 0.010 0.033
CI 3500 3.500 0.186 0.187 0.109 0.124 0.005 0.015 0.189 0.191 0.139 0.010 0.035
CI 3502 3.500 0.123 0.124 0.109 0.124 0.005 0.015 0.126 0.128 0.139 0.010 0.035
CI 3750 3.750 0.248 0.249 0.115 0.130 0.005 0.015 0.251 0.253 0.145 0.010 0.037
CI 3875 3.875 0.248 0.249 0.123 0.138 0.005 0.015 0.251 0.253 0.153 0.010 0.039
CI 4000 4.000 0.248 0.249 0.127 0.142 0.005 0.015 0.251 0.253 0.157 0.010 0.040
WE
R
D
AC
B
Cast Iron
Pisto
n R
ing
s
Edmonton, AB (Head Office)9211 - 41 Avenue NW780.438.6055
www.hitechseals.com100
Imperial SealsPiston Rings
A B C W D R E
Part Number
SealO.D.
Seal Width Seal C/S Split Gap Groove Width Min. Groove Depth
Groove Root
Radius
Max. Extrusion
GapMin. Max. Min. Max. Min. Max. Min. Max.CI 4000187 4.000 0.186 0.187 0.127 0.142 0.005 0.015 0.189 0.191 0.157 0.010 0.040
CI 4000312 4.000 0.310 0.311 0.127 0.142 0.005 0.015 0.313 0.315 0.157 0.010 0.040
CI 4250 4.250 0.248 0.249 0.135 0.150 0.005 0.015 0.251 0.253 0.165 0.010 0.043
CI 4250187 4.250 0.186 0.187 0.135 0.150 0.005 0.015 0.189 0.191 0.165 0.010 0.043
CI 4500 4.500 0.248 0.249 0.145 0.160 0.005 0.015 0.251 0.253 0.175 0.010 0.046
CI 4500187 4.500 0.186 0.187 0.145 0.160 0.005 0.015 0.189 0.191 0.175 0.010 0.046
CI 4750 4.750 0.248 0.249 0.152 0.167 0.010 0.020 0.251 0.253 0.182 0.010 0.048
CI 5000 5.000 0.248 0.249 0.160 0.175 0.010 0.020 0.251 0.253 0.190 0.010 0.050
CI 5000187 5.000 0.186 0.186 0.160 0.175 0.010 0.020 0.189 0.191 0.190 0.010 0.050
CI 5000312 5.000 0.310 0.311 0.160 0.175 0.010 0.020 0.313 0.315 0.190 0.010 0.050
CI 5250 5.250 0.248 0.249 0.166 0.181 0.010 0.020 0.251 0.253 0.196 0.010 0.052
CI 5500 5.500 0.248 0.249 0.175 0.190 0.010 0.020 0.251 0.253 0.205 0.010 0.055
CI 550187 5.500 0.186 0.187 0.175 0.190 0.010 0.020 0.189 0.191 0.205 0.010 0.055
CI 6000 6.000 0.310 0.311 0.191 0.206 0.010 0.020 0.313 0.315 0.221 0.010 0.060
CI 6000250 6.000 0.248 0.249 0.191 0.206 0.010 0.020 0.251 0.253 0.221 0.010 0.060
CI 6500 6.500 0.310 0.311 0.211 0.226 0.010 0.020 0.313 0.315 0.241 0.010 0.066
CI 6750250 6.750 0.248 0.249 0.219 0.234 0.010 0.020 0.251 0.253 0.249 0.010 0.068
CI 7000 7.000 0.310 0.311 0.228 0.243 0.010 0.200 0.313 0.315 0.258 0.010 0.071
CI 7500250 7.500 0.248 0.249 0.244 0.259 0.010 0.020 0.251 0.253 0.274 0.010 0.075
CI 8000 8.000 0.372 0.373 0.260 0.275 0.010 0.020 0.375 0.377 0.290 0.010 0.080
CI 8000312 8.000 0.310 0.311 0.260 0.275 0.010 0.020 0.313 0.315 0.290 0.010 0.080
CI 8500250 8.500 0.248 0.249 0.275 0.290 0.010 0.020 0.251 0.253 0.305 0.010 0.085
CI 9000 9.000 0.372 0.373 0.294 0.309 0.010 0.020 0.375 0.377 0.324 0.010 0.090
CI 9000500 9.000 0.497 0.498 0.294 0.309 0.010 0.020 0.500 0.502 0.324 0.010 0.090
CI 10000 10.000 0.371 0.373 0.317 0.332 0.010 0.020 0.375 0.377 0.347 0.010 0.097
CI 12500500 12.500 0.496 0.498 0.389 0.419 0.010 0.020 0.500 0.502 0.434 0.010 0.121
Cast Iron
Pis
ton
Rin
gs