Post on 18-May-2018
transcript
The PK 60002 Performance opens up a broad spectrum of opportunities for its crane operators:
20.4 m hydraulic outreach and a lifting moment of 58.3 mt see to that! By the use of high-strength,
fine-grained steel the ideal ratio between deadweight and performance can be achieved.
In addition, technical highlights such as AOS, Power Link Plus, HPLS (High Power Lifting System),
and the optional integrated stability control (ISC) guarantee top performance of this heavy-duty
crane.
ENORMOUS LIFTING CAPACITY
GREATER PERFORMANCE
Advanced Package
• HPLS• Oil cooler installed• Radio remote control• Capacity display on control console• PALTRONIC 50
Endless slewing mechanism
The endless slewing mechanism fitted as standardtogether with the slewing ring permits an unrestric-ted radius of action. As a result the crane works muchmore quickly and cost-efficiently.
Load holding valves
They prevent the crane booms from dropping andare fitted as standard on the slewing system and onthe main boom cylinder, the extension boom cylin-ders, and the swivel cylinder. The valves are positio-ned in such a way that they are protected from beingdamaged.
AOS
The Active Oscillation Suppression system, which isavailable exclusively from PALFINGER, compensatesfor jolts and sharp stress cycles caused by crane ope-ration. As oscillations are eradicated, the crane canwork with pin-point accuracy, much more quickly andtherefore more cost-efficiently.
Control valve
In combination with the radio remote control systemthe load sensing proportional valve enables the craneto be adjusted very slightly.
Integration of the base frame (optional)
The direct integration of the base frame into thesupporting frame gives the crane a low overallheight.
Additional fly jibs
To extend the range of applications of the PK 60002Performance, additional fly jibs are available in seve-ral designs and for various boom versions.
CONVINCING CLAIMS
KTL – the cathotic dip painting
The shot-blasted crane parts are covered in zinc phos-phate in an immersion process and coated electro-statically. The subsequent two-component top coa-ting of paint provides a surface protection which inthe past was usually only found in the automotiveindustry.
Hose equipment for accessories
This option provides the oil supply for accessories.The hoses are routed in compact troughs and plasticlink chains. Optimal protection is achieved.
Functional Design
• Cover for the control valve area • Covering for the hoses behind the crane column • Outrigger system with internally routed hydraulic
hoses
POWER LINK PLUS
This knuckle boom specially developed by PALFINGERwhich can be angled upwards stands out by virtue ofexcellent movement geometry. Even in the tightestspaces difficult crane jobs can be carried out withoutany problems.
Return oil utilisation
The high speed of the extension system is impressive.It results from the return oil utilisation, which isinstalled as standard, along with generously dimen-sioned hydraulic lines. This makes for increased effi-ciency in any type of application!
Outrigger system
The 8.6 m (28’ 3”) outrigger system is fitted as stan-dard with support cylinders that can be hydraulicallyswivelled up 180° and ensures optimal stability. Thecontrol valve for the crane and the auxiliary stabili-zers are mounted on the base as standard.
8ft
16ft
24ft
32ft
40ft
48ft
56ft
64ft
72ft
80ft
88ft
96ft
104ft
112ft
120ft
0ft
tf401tf27tf46tf65tf84tf04tf23tf42tf61tf8tf0 96ft88ft80ft
2756lbs
1984lbs
1190lbs
992lbs
816lbs
1499lbs
4145lbs
6878lbs
1250kg
900kg
540kg
450kg
370kg
680kg
1880kg
3120kg
6878
9039
1874
2447
3880
lbs
lbs
lbs
lbs
lbs
4145
6305
1675
2183
3461
2756
4365
1499
1962
2668
1984
3263
1367
1786
1918
816
1455
772
1257
62lbs
772
1190
2050
1124
1499
1146
1499
2557
1257
1631
1455
992
1742
948
1389
948
kg
kg
kg
kg
kg
3120
4100
1110
850
1760
1880
2860
990
760
1570
1250
1980
890
680
1210
900
1480
810
620
870
370
660
570
350
28kg
350
540
930
680
510
520
680
1160
740
570
660
450
790
630
430
430
80°
70°
45° 25°
0m
35m
30m
25m
20m
15m
10m
5m
30m25m20m15m10m5m0m0ft
104ft
96ft
88ft
80ft
72ft
64ft
56ft
48ft
40ft
32ft
24ft
16ft
8ft
80ft 88ft 96ft72ft64ft56ft48ft40ft32ft24ft16ft8ft0ft
2447lbs
2072lbs
1720lbs
3042lbs
3880lbs
5159lbs
7451lbs
9700lbs
1110kg
940kg
780kg
1380kg
1760kg
2340kg
3380kg
4400kg
3175
4056
lbs
lbs
2844
3616
2160
2690
1698
2227
90lbs
2579
3263
2006
2491
2359
2954
3571
4586
2910 19843748 16532359456351815886lbs
3880
3042
2469
2072
4938
3880
2249
1720
3153
2447
6459
5159
9237
7451
lbs
lbs
13735
9700
kg
kg
6230
4400
4190
3380
2930
2340
2240
1760
1020
780
1430
1110
1760
1380
1120
940
kg 2670 2350 2070 1070 7501700 9001320
2080
1620
1340
1070
1130
910
1480
1170
41kg
1010
770
1220
980
1640
1290
kg
kg
1840
1440
0m
5m
5m 10m 15m 20m 30m25m
10m
15m
20m
30m
25m
0m
80°45°
70°
25°
D PJ170E JV1 DPS PLUS
MINIMUM DEADWEIGHT
PK 60002 Performance
F PJ125E JV1 DPS PLUS
PK 60002 D PJ170E JV1
PK 60002 E PJ125E JV1
PK 60002 F PJ125E JV1
F G
D E
GREAT OUTREACH
PK 60002 Performance
The
ou
trea
ches
sta
ted
are
wit
h a
bo
om
an
gle
of
20°
and
are
th
eref
ore
no
t th
e m
axim
um
.
Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice.
Dimensions may vary. Subject to technical changes, errors and translation mistakes. *) Optional features KP-PK60002M2+E, 06/09
www.palfinger.com
PK 60002 PERFORMANCE: IDEAL FOR MANY DIFFERENT APPLICATIONS
PK 60002 PerformanceTechnical Specifications (EN 12999 H1-B3)Max. lifting moment 58.3mt/572.0 kNm 421890 lbs Max. lifting capacity 21000 kg/206.0 kN 46300 lbsMax. hydraulic outreach 20.4 m 66’ 11’’Max. outreach 25.1 m 82’ 4’’Max. outreach (with fly-jib) 32.6 m 106’ 11’’Slewing angle endlessSlewing torquewith 1 gear 4.5mt/44.1 KNm 32530 ft. lbs with 2 gears 7.0mt/68.7 KNm 50670 ft. lbs
PK 60002 A Performance Standard craneOutreach 7.7 m 25’ 3’’Stabilizer spread standard 8.6 m 28’ 3’’Fitting space required min. 1.51 m/4’ 11’’ max. 1.66 m/5’ 5’’Width folded 2.55 m 8’ 4’’Max. operating pressure 350 bar 5075 psiRecommended pump capacity from 80 l/m 17.6 imp.gal/min 21.1 US gal./minRC and LC-system to 100 l/m 22.0 imp.gal/min26.4 US gal./minDead weight standard crane 4956 kg 10930 lbs
Max. lifting moment