Post on 30-Jun-2020
transcript
PORTABLE HAND POWEREDFLANGE FACING TOOL
Hi-Tech Design, Cost Effective Solution
No power supply? No room for a compressor? No problem. Hydratight’s new ultra-portable,hand powered tool QuickFace makes even the hardest to reach pipe flanges accessible in asafe and convenient way.
QuickFace makes refacing easy
Every day we’re presented with hundreds of situations whereflanges that need to be refaced are in awkward or even dangerouslocations. Pipes can be located at the top of a refinery installationor miles away from the nearest power line, without room to move.
Now for the first time ever, engineers can rely on all the accuracyand performance of Hydratight’s bigger air and electric poweredtools in a lightweight and extremely portable format. A simple andcost effective solution with hi-tech design, QuickFace turns a twoman operation with heavy equipment, compressors and portablegenerators into a one man job.
Light on weight, not on features
The QuickFace tool itself weighs only15lbs (6.8kg), which means it’s easy tocarry, yet can still reface flange surfaces onpipes from 1in (25.4mm) up to 4in (102mm) withease. As you’d expect from Hydratight, pareddown weight means no loss of performance. Thesystem has interchangeable lead screws thatmake it suitable for resurfacing damaged raised-faceor lens-ring joint flanges to the high safety standards required.
Plus QuickFace operation couldn’t be simpler; after selecting thecorrect lead screw for the operation, the tool body is inserted inthe pipe end and centers itself with adjustable locators to providetruly concentric operation.
The tool arm is then rotated by hand using a worm-gearmechanism to provide a perfect spiral “gramophone” finish. The tool can be adjusted with a calibrated slide to define cut depth and the correct finish.
Small and portable enough to be a permanent addition to yourequipment range, QuickFace is the perfect solution to all of yoursmall diameter facing problems.
Hydratight also manufactures a wide range of flange facing andportable machining tools. For more information on these and thenew QuickFace tool please visit www.hydratight.com/facing oremail quickface@hydratight.com.
Note: ID ranges = 0.984 – 2.26in (25 – 57.5mm) OD ranges = 0.984 – 12in (25 – 305mm)
431
2
5
910
11
14
31
3233
2524
15
20 2627
23
28
12
30
29
13
6
8
19
22
21
7
18
1. USA - SACRAMENTO, CAT: +1 916 452 3125E: sacramento@hydratight.com
2. USA - LONG BEACH, CAT: +1 310 549 4100E: longbeach@hydratight.com
3. USA - RED WING, MNToll Free: 800 283 1937T: +1 651 388 8661E: redwing@hydratight.com
4. USA - ANTIGO, WIT: +1 715 627 5500E: antigo@hydratight.com
5. USA - HOUSTON, TXToll Free: 800 895 3849T: +1 713 860 4200E: houston@hydratight.com
6. USA - ORANGE, TXToll Free: 888-644-9372T: +1 409 745 5800E: orange@hydratight.com
7. USA - GONZALES, LAToll Free: 888 644 8168T: +1 225 644 8168E: gonzales@hydratight.com
8. USA - MOORESBORO, NCToll Free: 866 453 0640T: +1 828 453 0640E: mooresboro@hydratight.com
9. BRAZIL - NITERÓIT: +55 (21) 2720 0380E: rio@hydratight.com
10. BRAZIL - MACAÉT: +55 (22) 2773 6605E: macae@hydratight.com
11. UK - WALSALL T: +44 (0) 121 50 50 600E: walsall@hydratight.com
12. UK - MORPETHT: +44 (0) 1670 515 432E: morpeth@hydratight.com
13. UK - ABERDEENT: +44 (0) 1224 215 930E: aberdeen@hydratight.com
14. FRANCE - BEZONST: +33 (0) 1 34 10 57 17E: france@hydratight.com
15. ITALY - CORSICOT: +39 (0) 2 48611133E: italy@hydratight.com
16. GERMANY - KERPENT: +49 (0) 22 37 92 30 10E: germany@hydratight.com
17. HOLLAND - BREDAT: +31 (0) 76 572 4550E: holland@hydratight.com
18. HOLLAND - ALKMAART: +31 (0) 72 511 8899E: holland@hydratight.com
19. NORWAY - STAVANGERT: +47 51 73 35 35E: norway@hydratight.com
20. EGYPT - CAIROT: +202 2 7046800E: egypt@hydratight.com
21. AZERBAIJAN - BAKUT: +994 12 545 9147E: baku@hydratight.com
22. KAZAKHSTAN - ATYRAUT: +7 7122 971095E: atyrau@hydratight.com
23. KUWAIT - SAFATT: +965 2 3263811E: kuwait@hydratight.com
24. SAUDI ARABIA - DAMMAMT: +966 3 833 8600E: saudi@hydratight.com
25. QATAR - DOHAT: +974 460 0350E: qatar@hydratight.com
26. UAE - ABU DHABIT: +971 2 6781133E: uae@hydratight.com
27. OMAN - MUSCATT: +968 2 4455627E: oman@hydratight.com
28. ANGOLA - LUANDAT: +33 (0) 6 28 58 28 03E: angola@hydratight.com
29. INDIA - MUMBAIT: +91 265 232 4255E: india@hydratight.com
30. SINGAPORET: +65 6515 4971E: singapore@hydratight.com
31. CHINA - TAICANGT: +86 512 5328 7500E: china@hydratight.com 32. AUSTRALIA - PERTHT: +61 8 9353 1659E: perth@hydratight.com
33. AUSTRALIA - QUEENSLANDT: +61 (0)7 3264 7719E: queensland@hydratight.com
1617
HT/QF/US/08-09
Material sourced from fully sustainable, managed forestsusing Elemental Chlorine Free Fiber.
www.hydratight.com
Global Standards Local Delivery
Contact