Post on 26-Dec-2015
transcript
PowerAlert 11.0
The only CERTIFIED Palm-Powered compatible UPS management software.
NEW!
EXCLUSIVE!
PowerAlert 11.0NOW SHIPPING FREE with most Tripp Lite UPS Systems or available as a FREE website download.
NEW!
EXCLUSIVE!
PowerAlert transmits critical power information from its PC interface . . .• UPS Operating Mode
• Load Percentage
• Battery Charge
. . . directly to your Palm Pilot or other Web-enabled PDA or wireless phone.
No matter where you are . . .. . . PowerAlert keeps you informed and in charge of network power conditions.
• Ensures 24/7 access
• Rapidly resolves costly crisis situations
In a meeting On the golf course On the road
Crisis #1:
A blackout strikes a critical server cluster running multiple operating systems and supported by one UPS system.
Crisis #1:
You’re notified of the crisis through an automatic page initiated by PowerAlert.
Resolution:
FIRST, determine remaining runtime.Check the battery charge level of the UPS system supporting the server cluster.
Resolution:
THEN, preserve runtime for critical loads.Turn off UPS outlets supporting non-critical loads.
1 2 3 4
Resolution:
FINALLY, monitor decreased load and increased battery charge.PowerAlert will automatically and safely power down the critical load before the battery is depleted.
Crisis #2:
Multiple servers in a cluster supported by multiple UPS systems are locked up.
Resolution:
FIRST, select the locked up server.
Resolution:
THEN, select “CONTROLS.”
Resolution:
FINALLY, select “REBOOT UPS.”PowerAlert will toggle UPS system power on and off to reset the locked up server.
Resolution:
PowerAlert is the ONLY software that allows you to manage and reboot EVERY major brand of UPS system.
PowerAlert 11.0The only certified Palm-Powered compatible UPS management software . . .
. . . a single part of Tripp Lite’s family of remote-control solutions.
• SNMP/Web remote control• TCP/IP remote control• Watchdog automatic
remote control