Post on 14-Jul-2020
transcript
powered byWebinar
Terry JinMark Hutchins Pedro Magalhães
Seraphim Solar Balancing cost and efficiency for a guaranteed LCOE reduction
28 April 20204 PM – 5 PM10 AM – 11 AM10 PM – 11 PM
| CEST| EDT| CST
Balancing Cost and Efficiency for
A Guaranteed LCOE Reduction
2020 April
2
About Seraphim
Mainstream High Efficiency Technologies
Seraphim New 166mm Half-cell Module
Contents01
02
03
About Seraphim01
3
COMPANY PROFILEFounded in 2011, Seraphim has registered impressive achievements in a short time. Seraphim’s core belief is that innovation is the key driver, so we’ve dedicated ourselves to consistently outpace the competition. With this strategy, Seraphim earned a Tier 1 distinction from BNEF, Top Performer from DNV GL, and loyalty from demanding customers around the world. With a total capacity of 5GW, Seraphim serves global customers with high-quality products and professional services. By the end of 2019, more than 8GW of Seraphim products were installed in over 40 countries.
1500+Global Employees
Tier 1 Solar Module Maker Listed by BNEF
100+R&D Technicians
50+ Global Financial Partners
40+ Destination Countries8+ GW Shipment
4
Top Performer Listed by DNV GL
5GW Capacity
100+Technical Patents
GLOBALIZED MANUFACTURING We have earned our reputation as an industry-leading solar product manufacturer largely due to the products’ excellent performance. We understand the importance of ensuring customer satisfaction. With over 20 local offices and 1500 employees globally, Seraphim is dedicated to providing efficient support and excellent customer services in all regions.
5
02Mainstream High Efficiency Technologies
6
LARGER WAFERS TRENDINGWith continuous development in solar ingots and wafers, cells are getting larger and larger. However, in the context of the entire value chain, 'the bigger the better' is not a foregone conclusion. After several rounds of calculation and analysis, we believe that 166mm is the most promising format for the long-term.
The surface area of M6 cell has been increased by 12% than M2, which helps reduce module production cost by 0.003USD/ W.
Compared to G1, M6 cell production cost is reduced by 0.065USD / W.
With166mm large silicon wafers, 72-cell module gains additional 50W output. In addition, 9BB can bring 5-10W power increase.
156.75mmM2
166mm 6BBM6
166mm 9BB M6
158.75mmG1
7
The Cost-profit Analysis of Silicon Wafer Technology
Source: PV InfoLink
OPTICAL ADVANTAGES OF MBB9BB increases the working area of the cell. The optical utilization rate of the ribbon area is increased from less than 5% tomore than 40%.
Ribbon Cell
Shielding widthA
Shielding widthB
9*A< 5*B
8
Reflected light
Glass Glass
Cell Cell
Curved surface Flat surfaceReflected light
Incident light Incident light
Ribbon Cell
MBB PLUS HALF-CELL
X X y y
x>yWhen cracking happens, the 9BB cell has lower power loss.
Half-cell technology reduces power loss by 3/4
Power losses = current2 * resistance【Power losses of half cell】=1/4【Power losses of full cell】
Lower Resistance Loss Lower Internal Loss
9
Ribbon
Seraphim New 166mm Half-cell Module03
10
SERAPHIM NEW 16MM HALF-CELL MODULE
THE AMALGAMATION OF ADVANCED TECHNOLOGIES Seraphim redefined the high-efficiency module series by integrating 166mm silicon wafers with multi-busbar and half-cut cell technologies. The maximum module efficiency of the new 166 half-cell series is 20%, and the maximum power output is 445W.
ADDITIONAL ENERGY YIELD FROM BIFACIAL The new 166mm half-cell modules are capable of converting energy from incident light and diffused light on the front side, while converting energy from reflected light and scattered light on rear sides. Thus these modules have higher yield and superior low irradiance performance. We managed to improve the module bifaciality rate up to 70 ± 5%, resulting in a theoretical maximum power of 579W, which can significantly reduce a project’s LCOE.
11
SERAPHIM NEW 16MM HALF-CELL MODULE
12
Module Type 144 Cells Module(430-445W, 166mm, 9BB)
144 Cells Bifacial Module(430-445W, 166mm, 9BB)
External Dimensions (mm) 2115 × 1052 × 40 2131 × 1052 × 30
Module Power (Wp) 430 - 445Front Back
430 - 445 320 - 332
Weight (kg) 25.0 29.0
Module Efficiency (%) 19.33 - 20.00 19.18 - 19.85
For more product information, please contact us to get the datasheets.
158.75mmG1
156.75mmM2
5.2% 9.9%
166mm 9BBM6
385W 405W445W
15.6%
13
ULTRA HIGH OUTPUT
BIFACIAL POWER GAIN
Positive electrode
Silicon nitride antireflection film
N-ion emitter
Back passivation
Back aluminum Aluminum grid
We managed to improve the module bifaciality rate up to 70 ± 5%.
Scene 1 Asphalt Ground
Surface Reflectance 10%
Power Generation Gain 7%
Scene 2 Lawn
Surface Reflectance 30%Power Generation Gain 10%
Scene 3 Aluminum Foil
Surface Reflectance 80%
Power Generation Gain 30%
166 9BB bifacial module will have a back gain of 5% to 30% in different installation environments. Ideally, this module can reach a maximum output power of 579W.
14
15% LOWER BOS COST
15
Preliminary estimate of 1MW photovoltaic system cost (USD)
project name description375W 435W
Quantity unit price price Quantity unit price priceLand lease Rental costs 10000 1.13 282485.88 8000 1.13 225988.70
Photovoltaic Tracker Aluminum alloy 1 0.04 42372.88 0.9 0.04 38135.59
Inverter TRM033KTL 29 0.05 47309.32 29 0.05 47309.32
Combiner cabinet Input voltage 380V< 63A< 2 2824.86 5649.72 2 2824.86 5649.72
Grid Cabinet Including lightning protection; loss of pressure and mouth; obvious breaking point 2 4237.29 8474.58 2 4237.29 8474.58
cableDC cable PV1- F- 1*4 16002 0.41 6554.52 13800 0.42 5652.54
AC cable ZRC- YJV- 0.6/1kV 4*16+1*10 6000 5.65 33898.31 6000 5.65 33898.31
Power quality monitor Class A 1 2542.37 2542.37 1 2542.37 2542.37
Environmental Tester 5 elements 1 1271.19 1271.19 1 1271.19 1271.19
Construction 1 0.06 56497.18 0.8 0.06 45197.74
Design 1 706.21 706.21 1 706.21 706.21
Commissioning fee 1 706.21 706.21 1 706.21 706.21
Total price without modules 488468.36 415532.49
Total cost without modules per watt (USD/W) 0.49 0.42
Note: The price is in dollars.
9.10% 9.50%10.80%
9.20% 9.30%
11.30%
0.00%
5.00%
10.00%
15.00%
20.00%
25.00%
0
1
2
3
4
5
6
Aug- 19 Sep- 19 Oct- 19 Nov- 19 Dec- 19 Jan- 20
The average daily power generation comparison
between half-cell and bifacial half-cell module
in different month (Sand)
half- cell PERC
bifacial half- cell PERC
bifacial half- cell power generation gain
19.90%21.10%
16.30%
19.60%20.00%
19.80%
0.00%
5.00%
10.00%
15.00%
20.00%
25.00%
0
1
2
3
4
5
6
Aug- 19 Sep- 19 Oct- 19 Nov- 19 Dec- 19 Jan- 20
The average daily power generation comparison
between half-cell and bifacial half-cell module
in different month (White Sand)
half- cell PERC
bifacial half- cell PERC
bifacial half- cell power generation gain
India
Unit:kWh/kW
16
3.18 3.51 3.65 3.71 3.91
0
1
2
3
4
5
6
half- cellPERC
bifacialhalf- cellPERC -
lawn
bifacialhalf- cellPERC -
concretefloor
bifacialhalf- cellPERC -sand
bifacialhalf- cellPERC -
white paint
The average daily power generation comparison
between half-cell and bifacial half-cell module
in different environments
The average daily powergeneration
Hainan, China
+10.5%
+15.1%
+16.8%
+23.2%
The average daily power generation gain
Unit:kWh/kW
Middle East
Unit:kWh/kW
Third-party Empirical Study
Class A Fire Resistance5400pa/2400pa Mechanical Load
Manufacturer Seraphim Brand A Brand B Brand C Brand D Brand E Brand F Brand G Brand H Brand I Brand J
Mono PERC ModuleWarranty (Years) 15 12 10 12 10 12 12 10 10 10 12
Extended product warranty: 5 years longer than industry mainstream
17
5400pa
2400pa
HIGH RELIABILITY AND WARRANTY
CONTACT US:
Terry.jin@seraphim-energy.com
Info@seraphim-energy.com