SR-750Pneumatic Over arm Pin rOuter

PMB #104 1124 Fir Avenue T: 1.888.982.2683 Youtube // @CantekMachinery www.cantekamerica.comBlaine, WA 98230 F: 604.540.1780 Twitter // @CantekMachinery sales@cantekamerica.com

The Cantek SR-750 overarm pin router has a solid welded steel frame construction with a cast iron tilting table. The large solid table is fitted with a steel fence and the spindle to column clearance is 30”. The 7.5 HP motor drives 10,000 rpm and 20,000 rpm from a flat belt and pulley. Guide pin depth stops can be preset in 6 positions and are easily changed from the machine face.

FeatuReS SPeCIFICatIONS• 7.5 HP motor (25 Full Load Amps)• 220 volt 3 phase 60 cycle operation – 2 speed motor• 0 – 45° tilt• 3 5/8” spindle travel• 10,000 and 20,000 rpm spindle speed• ¼”, 5/16”, 3/8”, ½”, 5/8” collets• 3 turret depth stop• 29 ½” distance from spindle to column• 35 ½ “ x 39 3/8” table• Net weight 1676 lbs.

Precision Spind le

Double Taper C ol lets

Workpiece Holding System(Optional)