Preedy Solutions Decoran

transcript

telwebemail

020 7700 0377www.preedysolutions.co.ukinfo@preedysolutions.co.uk

Lamb Works, North Road, Islington, London N7 9DP

DecoranGLASS CERAMIC

Environmentally Friendly •100% Sustainable •100% Recycled Material

Decoran is manufactured from float glass and glass bottle waste in Bio-Gas fired ovens. Decoran is a glass ceramic sotherefore has a high degree of hardness, is scratch resistant, colourfast, translucent and resistant to temperatures between -50 and 200 degreess Celcius.

Decoran can be processed as either it were glass or granite, so can be used for table tops, vanity tops, kitchen surfacesand cladding.

Two surface finishes are available, Polished and Hammered and in eight standard colours. With the inclusion of inorganicpigmentation in the manufacturing process almost any colour is available (dependant on quantity required). Decoran is alsofrost proof and UV resistant.

See the following pages to give you an idea what can be achieved with Decoran.

telwebemail

Jade polished glass ceramic

Clear jade rear side polished offers maximum transparency

telwebemail

Jade hammered offers translucency

Jade hammered

telwebemail

Anthracite polished but paque glass ceramic

LED lit vanity unit

telwebemail

Utility sink unit Anthracite polished

telwebemail

Galaxy Polished

telwebemail

Anthacite Polished

telwebemail

Jade polished

telwebemail

A full sheet of jade hammered

Clear jade transparent

DIN EN 99< 0.1 [Ma.-%]Water absorption

0.7 [J/g K]Specific heat capacity Cp

1.04 [W/m K] at 20mm thicknessHeat conductivity at 64ºC

DIN EN 1037.22 [10 -6/K]Heat expansion 20-100ºC

DIN EN 1015 guaranteed (7 achieved)5-6 [GPa]

HardnessAccording to MohsAccording to Vickers HV

Approx. 57 [kN/mm ] average valueElasticity module

Approx. 3.2 [KN] {average value}Tearing strength attachment point{anchors attached to the rear from the firm ofKeil, placement depth 13 mm}

DIN 52112Approx. 28 [MPa]or[N/mm]Approx. 22 [MPa] or[N/mm]

Bending strengthCharacter istic value5% fractile

Approx. 48.00 [kg]Weight per mwith 20mm thickness

Approx. 2.4 [g/cm ]Specific gravity

±1,20 [mm]±1,00 [mm] high polish±1.20 [mm] hammered finish

Dimensional tolerancesDimensionsThickness

1200 x 900 [mm], thickness 20 [mm]2780 x 1260 [mm], thickness 20 mm]

DimensionsStandard panel sizeMaximum panel size

DINValues/parametersTechnical data

Closed sur face, therefore easy removal of graffiti, cleaning with alltraditional cleaning agents and solvents

Surface properties

High polish or hammered finishSurface area

DIN 51130R 9 { with hammered-finished sur face}Slip resistance

DIN EN 154Class II, 300 revolutionsSurface wear

DIN 4102Class AFire class

DIN EN 122Class ACaustic resistance

DIN EN 122Class AAAcid resistance

DIN EN 122Class AAChemical resistance

DIN EN 122Class 1Stain resistance

DIN EN 202No tr ials with visible defectsFrost resistance

telwebemail

Preedy Solutions Decoran

Documents