Post on 25-Jan-2016
description
transcript
+
Problem Solving/Engineering Design Process
By: Nehemiah Phillips Bradley Asbury Cyra Jones
+Step 1: Define Problem
Scrap wood needs to be made into a wooden puzzle cube
Must design a 3-D puzzle system that only uses 27 small cubes to create a large puzzle cube when assembled
+Step 2: Brainstorm, Research & Generate Idea
Our group came up with several designs with the pieces of the cube
Researched possible materials for packaging and possible puzzle cube combination
+Step 3: Identify Criteria & Specify Constraints
Use 27 cubes
Forms a 2 ¼ -inch cube when assembled
Pieces must interlock
Each puzzle piece must have more than 3 but no more than 6 small cubes in it
No two puzzles pieces can be the same
+Step 4: Develop/ Propose Design & Choose Solution
Selected a complicated cube comprised of 6 puzzle pieces
+Step 5: Implement Propose Solution
Assigned roles in the cube project to group members
+Step 6: Make Model/Prototype
Designed puzzle pieces on AutoCAD and inventor to make sure puzzle cube would assemble correctly
+Step 7: Evaluate Solution & It’s Consequences
Design works but only has one combination
+Step 8: Reform Design
No changes was made
+Step 9: Create Final Design
Final puzzle pieces built, painted and assembled into a cube
Packaging/ direction made and placed with finished puzzle
+Step 10: Communicate Processes/ Result
Technical report written over project and project shared with the class