Post on 05-Jun-2018
transcript
JOLLY MOTORtotal protection at last.
Innovate. Simplify. Distinguish.
Since 1978 Jolly Motor has been making and distributing high quality motors
and automation devices for roller shutters, awnings, screens and venetian
blinds for residential use worldwide.
The company has become a market leader thanks to its mission, which aims
at constant performance improvement and total customer satisfaction. Its
high-tech solutions have revolutionised the usability of protection systems by
introducing a new dimension of comfort, user-friendliness and safety. Also,
the products are refined, and are born out careful research into aesthetics and
shapes. All to ensure that its automated operators are not just intelligently
functional but dynamic elements of design and decor as well.
research and developmentResearch, development and progress are the fundamentals of Jolly Motor’s philosophy. Continuous investment into experimentation and engineering of avant-garde production, control and testing technologies, plus constant market trend analysis have made it possible for the company to distinguish over 30 years with ever more evolved performances and competitive results.
•research and development
•made in italy
•design and innovation
•international distribution
•top-quality service
•testing
made in italyJolly Motor is about a vast range of solutions that bring homes the world over a guarantee of made-in-Italy quality and reliability. Jolly Motor’s automation, motors and accessories are in fact engineered, patented and assembled in the company’s Rovereto, Trento laboratories, and then marketed through a solid network of distributors and retailers.
design and innovationTechnology at its best and ultimate style. Jolly Motor’s automation devices provide greater freedom in managing and programming sun protection systems, and confer unique value in terms of decor and expression. Dimming, lowering, making transparent: all light and shade plays to bring character to design and indoor atmospheres.
international distributionFrom being a player in the Italian market, the Jolly Motor trademark soon consolidated its position on the international stage. This is proof of the company’s extremely active and dynamic spirit; which is what made it possible to transform sun protection automation from exclusive luxury enjoyed by few to something within everyone’s reach. Today, Jolly Motor operates in forty different countries, through retailers and distributors.
top-quality serviceJolly Motor also means top quality service. A staff of highly-skilled, hand-picked professionals, are constantly training and honing their skills. This is to guarantee all of its clients with competent and above all total support: whether it be choosing which automation, installing it or providing fast after-sales service.
testingAll Jolly Motor solutions and accessories undergo rigorous testing through the special Three formula:1.Testing the measurements of the gearmotors’ nominal torque, static and dynamic breaking plus functional specifications. 2.Functionality and precision testing of all the limit switches it manufactures.3.Testing for compliance with requisites and standards and relative certifications.
5060
50506060
5060
506050
404050
50
40405050
4050506060
50506060100
5060
40505060
55
COMMAND AND CONTROL DEVICES p. 92
AWNINGS p. 44 SCREENS p. 72SHUTTERS p. 6
ELECTROMECHANICAL
_STANDARD
FCH .........................................................50FCI, JM2 FCI ......................................52
_MANUAL RESCUE ACTION
FMM, FMM-T ......................................54FMM-Q, FMM-E .................................56FMM ........................................................58FMM-Q, FMM-E .................................60
ELECTRONIC
_CABLE COMMAND
EL.AX, EL.AX SOFT.................. 62EL.AX, EL.AX SOFT..................64
_RADIO COMMAND
SAT IS, SAT IS SOFT ............... 66 SAT IS, SAT IS SOFT ............... 68
SAT SM................................................70
ELECTROMECHANICAL
_STANDARD
FC45 ....................................................... 76FC30....................................................... 78
FCH .........................................................80
ELECTRONIC
_CABLE COMMAND
EL.AX ....................................................82
_RADIO COMMAND
SAT IS FC45 ...................................84SAT IS FC30 ................................... 86SAT IS ..................................................88SAT SM................................................90
ELECTROMECHANICAL
_STANDARD
FCS/B ......................................................12FCH .......................................................... 14FCZ ............................................................16FCI .............................................................18FMI ...........................................................20
_MANUAL RESCUE ACTION
FMM, FMM-T ......................................22FMM-Q, FMM-E .................................24FMM ........................................................ 26FMM-Q, FMM-E .................................28FMM ........................................................30
ELECTRONIC
_CABLE COMMAND
EL.AX .................................................... 32EL.AX .................................................... 34
_RADIO COMMAND
SAT IS FCS/B ................................ 36SAT IS .................................................. 38SAT SM................................................40SAT IS ..................................................42
6 7
SHUTTERSTOTAL PROTECTION AT LAST.
ELECTROMECHANICAL ELECTRONIC
Standard
SHUTTERS
Manual rescue action
6040
FCIFMI
FCS/B
10050
FMMFMM, FMM-TFMM-Q, FMM-E
Cable command Radio command
6050
EL.AXEL.AX
6040
SAT ISSAT IS FCS/B
50
FCHFCZ
60
FMMFMM-Q, FMM-E
50
SAT ISSAT SM
8 9
Jolly Motor is the home of comfort.The company’s motors are sturdy, reliable and quick to install. They allow you to easily adjust the totally automated opening, lowering and winding of your shutters, in absolute safety. You can operate them by comfortably sitting on your sofa using the remote control or, for those of you that are often away on business – you can programme your shutters to activate at pre-set times and at the angles of your choice. The motors are precise and sensitive, their slow action makes for better shutter maintenance. They are so silent as to be ideal in relaxing moments.
total protection at last.
1
4
5
7a
7b
3
2
7c
6
8
1
4
5
7a
7b
3
2
7c
6
8
JOLLY MOTOR
10 11
ASSE
MBL
ING
Jo
lly M
otor
gea
rmot
ors
in ro
lling
shu
tter
s
DESCRIPTION:
ASSE
MBL
ING
of
Jol
ly M
otor
gea
rmot
ors
in ro
lling
shu
tter
s
CROWN:used to transfer the rotating movement from the winder tube (5) to the limit switch, and to count the number of turns. This takes place with both electromechanical and electronic limit switches. It is inserted and made to slide until the end of the tube, to cover the white ring of the limit switch. The crown, which is usually coupled with a pulley, is chosen depending on the shape (i.e. rounded, octagonal, with ogive, etc.) and diameter of the winder tube.
PULLEY:it serves to transfer the rotating movement from the low-speed shaft to the winder tube (5). It is assembled onto the low-speed shaft and secured by way of a clip (3). The choice of pulley depends on the shape and dimension of the winder tube.
CLIP:for fastening the pulley, positioned on low-speed shaft of the tube.
SQUARED SAFETY
INSERT:serves to connect the gearmotor to the support (7a). It is inserted into the limit switch and, thanks to its square shape, ensures safe and sound anchoring of the limit switch to the support, which is in turn secured to the box or wall.
WINDER TUBE:the gearmotor is inserted into the winder tube onto which the shutter will be later secured. The rotating movement of the gearmotor is transferred to the winder tube by the pulley (2). For safety reasons, a screw is sometimes fitted between the pulley and the winder tube.
TELESCOPIC CAP:it serves to adapt the length of the winder tube (5) to the actual dimensions of the box or window case. It is fitted onto the winder tube and, once the length is adapted, is coupled to the bearing(7c): see point 7.
SUPPORTS:two supports (7a) and (7c) are needed to anchor the winder tube to the box. These are assembled onto the ends walls of the box or window case. Once the supports are assembled, first the winder tube is anchored on the side of the gearmotor by inserting the square safety pin (4) into the support (7a) and then securing it by way of a split-pin (7b), and then on the opposite side, by inserting the telescopic cap pin (6) into the bearing support (7c).
SHUTTER-TUBEATTACHMENT SYSTEM:this system lets you secure the shutter to the winder tube. Using the special JOLLY BLOCK safety system, moreover, prevents any forced raising of the roller shutters from the bottom (i.e. attempted break-ins).
Alternatively, without the JOLLY BLOCK safety function, the shutter can be fastened to the winder tube a traditional clamp method with accessories (i.e. hook for attaching a roller clamp and hook for roller shutters with cut-resistant slot.)
The JOLLY BLOCK safety system is not recommended suggested for use with electromechanical limit switches.
ASSEMBLING JOLLY MOTOR GEARMOTORS IN ROLLING SHUTTERS assembling / SHUTTERS
LIMIT SWITCHES
PULLEY
Pulleysecuring CLIP
CROWN
SUPPORT
PIN
SQUARED SAFETYINSERT
LOW-SPEED SHAFT WINDER TUBE
traditionalsystem
traditionalsystem
JOLLY BLOCKtube-shutter attachment system with safetydevice
TELESCOPICCAP
SUPPORTwith bearing
FCS/B
40
40
63
20.5
12
15
5101914 24.1
Ø35
2.5569.6
12 13
FCS/
Belectromechanical / series 40
operator / SHUTTERS
command and control devices:
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The 230V A.C./50Hz, series 40 electromechanical tubular gearmotorwith progressive screw-adjusted endpoints.Quick and easy to install, and ideal for smaller boxes, featuring theraised plate with endstop 12 mm diameter hole.
40
ELEC
TRO
MEC
HA
NIC
AL
stan
dar
d
ELEC
TRO
MEC
HAN
ICAL
_ st
anda
rd
Name FCS/BCode JM 40/4 JM 40/10
Tube length (mm) 510 510
Torque (Nm) 4 10
Power (W) 115 113
Speed (rev/min) 25 13
Endpoint (rev/min) 36 36
Type of packaging single single
Packaging 10 10
Weight (Kg) 1,7 1,7
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
50 FCH
50
48
72
54
4
20
6022
27
(440) 500
(509.7) 569.7
15 19.2
Ø45
35.5
14 15
electromechanical / series 50FC
H
command and control devices:
operator / SHUTTERS
The 230V A.C./50Hz, series 50 electromechanical tubulargearmotor with progressive screw-adjusted endpoints.While suited for any shutter box, it can be easily installed insmall-size boxes. Its special supports make it unique.
50
ELEC
TRO
MEC
HA
NIC
AL
stan
dar
d
ELEC
TRO
MEC
HAN
ICAL
_ st
anda
rd
Name FCHCode JM 50/8 JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 440 440 500 500 500
Torque (Nm) 8 15 25 35 50
Power (W) 97 120 195 220 270
Speed (rev/min) 13 13 13 13 13
Endpoint rev. (rev/min) 24 24 24 24 24
Type of packaging single single single single single
Packaging 10 10 10 10 10
Weight (Kg) 2,0 2,2 2,5 2,6 2,9
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
50 FCZ
50
48
6072
4
20 62 27
2218 19.2
Ø45
35.5(340) 440
(412.7) 512.7
16 17
electromechanical / series 50FC
Z
operator / SHUTTERS
The 1230V A.C./50Hz, series 50 electromechanical tubular gearmotordesigned especially for confined spaces. Featuring a semiautomaticendstop which allows adjustment of up and down points without using screwdriver.It is ideal for very narrow shutters given the short length of the motor tube.N.B.: it exclusively requires the 11653NY and 116129Y safety inserts.
command and control devices:
50
ELEC
TRO
MEC
HA
NIC
AL
stan
dar
d
ELEC
TRO
MEC
HAN
ICAL
_ st
anda
rd
Name FCZCode JM 50/8 JM 50/15
Tube length (mm) 340 340
Torque (Nm) 8 15
Power (W) 97 120
Speed (rev/min) 13 13
Endpoint rev. (rev/min) 27 27
Type of packaging single single
Packaging 10 10
Weight (Kg) 2,0 2,2
TRANSMITTERS RECEIVERS CONTROL UNITS
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92 92
ACCESSORIES
family: 50_ EL.AX / EL.AX SOFT 60_ EL.AX / EL.AX SOFT
60 FCI / JM2 FCI
60
Ø20
1518 14 19.2
Ø55
672.7
21.5600
33.5
68Ø16
63
50
18 19
operator / SHUTTERS
JM2
FCI
FCI
command and control devices:
FCI The 1230V A.C./50Hz, series 60 electromechanical tubular gearmotor ideal for large size shutters. Featuring an progressively screw adjustable endstop with 16x16 mm pin and 18 mm length.
electromechanical / series 6060
ELEC
TRO
MEC
HA
NIC
AL
stan
dar
d
ELEC
TRO
MEC
HAN
ICAL
_ st
anda
rd
JM2 FCI When working with very large sizes, the “coupled motor” formula is ideal. Two gearmotors that work simultaneously managed by a single endstop. Guaranteed to be free of any tube-torsions or warping due to winding up, thanks to this intelligent system, a large centre load does not affect it.
Name JM2 FCICode JM2 60/80 JM2 60/100 JM2 60/130
Tube length (mm) 2 x 600 2 x 600 2 x 600
Torque (Nm) 160 200 260
Power (W) 840 990 1314
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) 40 40 40
Type of packaging single single single
Packaging 4 4 4
Weight (Kg) 7,6 8,8 10,0
Name FCICode JM 60/80 JM 60/100 JM 60/130
Tube length (mm) 600 600 600
Torque (Nm) 80 100 130
Power (W) 450 463 563
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) 40 40 40
Type of packaging single single single
Packaging 6 6 6
Weight (Kg) 4,7 4,9 5,0
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
60 FMI
60
6005 14 19.2
Ø55
21.5
Ø20100
85
20 21
electromechanical / series 60FM
I The 1230V A.C./50Hz, series 60 electromechanical gearmotor designedfor small size boxes. It features a progressively adjustable screw endstopand a special plate support.All this ensures optimal mechanics and reduced overall dimensions.
60
ELEC
TRO
MEC
HA
NIC
AL
stan
dar
d
ELEC
TRO
MEC
HAN
ICAL
_
stan
dard
Name FMICode JM 60/80 JM 60/100 JM 60/130
Tube length (mm) 600 600 600
Torque (Nm) 80 100 130
Power (W) 450 463 563
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) 40 40 40
Type of packaging single single single
Packaging 6 6 6
Weight (Kg) 4,7 4,9 5,0
operator / SHUTTERS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
FMM / FMM-T50
50
81 89
62
81
Ø12
62
110
Ø9
22
27
621.3540
24.526.5 19.3
Ø45
35.5
35.5540621.2
26.524.5
19.3
Ø45
110
27
Ø22
9
48
Ø12 72
70
22 23
electromechanical / series 50EL
ECTR
OM
ECH
AN
ICA
Lm
anual
resc
ue a
ctio
n
ELEC
TRO
MEC
HAN
ICAL
_ m
anua
l res
cue
actio
n
50
FMM
/ F
MM
-T
Name FMM / FMM-TCode JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 540 540 540 540
Torque (Nm) 15 25 35 50
Power (W) 120 195 220 270
Speed (rev/min) 13 13 13 13
Endpoint rev. (rev/min) 24 24 24 24
Type of packaging single single single single
Packaging 6 6 6 6
Weight (Kg) 2,5 2,7 2,9 3,2
FMM round
operator / SHUTTERS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The extended family of tubular gearmotors with manual rescue action.This allows you to manually release the shutter during a blackout.Four variants of this take into account clients’ installation requirements.The manual rescue action can be either by passing rod or by outer shafts.
The 230V A.C./50Hz, series 50 electromechanical tubular gearmotor withprogressive screw-adjusted endpoints.Manual rescue action by 9mm diameter outer shafts, which are specific foreyelet or joint fitted sleeve.The FMM-T version is recognisable thanks to it small, rounded endstop-head shape.
FMM-Q / FMM-E
50
Ø12
3751
88
80
62
50 27
22
621.3540
24.526.5 19.3
Ø45
35.5
24 25
electromechanical / series 50FM
M-Q
/FM
M-E
operator / SHUTTERS
ELEC
TRO
MEC
HA
NIC
AL
man
ual
resc
ue a
ctio
n
FMM squared
ELEC
TRO
MEC
HAN
ICAL
_ m
anua
l res
cue
actio
n
FMM hexagonal
50
Name FMM-Q/ECode JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 540 540 540 540
Torque (Nm) 15 25 35 50
Power (W) 120 195 220 270
Speed (rev/min) 13 13 13 13
Endpoint rev. (rev/min) 24 24 24 24
Type of packaging single single single single
Packaging 6 6 6 6
Weight (Kg) 2,5 2,7 2,9 3,2
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The 230V A.C./50Hz, series 50 electromechanical tubular gearmotorwith progressive screw-adjusted endpoints.Manual rescue action by squared or hexagonal passing rod.The two versions are distinguishable by the diameter of the passing rod.The squared one is 8mm in diameter while the hexagonal one is 7 mm in diameter.
FMM
-T
60 FMM
60
Ø20
15
120
Ø9
37.8 19.2728.5
21.5650
Ø5512
010
5
152
90
100
Ø48
26 27
electromechanical / series 60FM
MEL
ECTR
OM
ECH
AN
ICA
Lm
anual
resc
ue a
ctio
n
The 230V A.C./50Hz, series 60 electromechanical tubular gearmotor withprogressive screw-adjusted endpoints.Manual rescue action by 9 mm diameter outer shafts, specifically designed forthe eyelet or joint sleeve.
ELEC
TRO
MEC
HAN
ICAL
_ m
anua
l res
cue
actio
n
60
Name FMMCode JM 60/80 JM 60/100 JM 60/130
Tube length (mm) 650 650 650
Torque (Nm) 80 100 130
Power (W) 450 463 563
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) 21 21 21
Type of packaging single single single
Packaging 4 4 4
Weight (Kg) 5,0 5,6 6,3
operator / SHUTTERS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
FMM-Q / FMM-E
60
Ø20
15
88Ø48
62
50
80
Ø55
21.56502128720.5
28 29
ELEC
TRO
MEC
HA
NIC
AL
man
ual
resc
ue a
ctio
n
FMM squared
FMM hexgonal
FMM
-Q/E
60
Name FMM-Q/ECode JM 60/80 JM 60/100 JM 60/130
Tube length (mm) 650 650 650
Torque (Nm) 80 100 130
Power (W) 450 463 563
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) 21 21 21
Type of packaging single single single
Packaging 4 4 4
Weight (Kg) 5,0 5,6 6,3
electromechanical / series 60
ELEC
TRO
MEC
HAN
ICAL
_ m
anua
l res
cue
actio
n
operator / SHUTTERS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The 230V A.C./50Hz, series 60 electromechanical tubular gearmotor withprogressive screw-adjusted endpoints. Manual rescue action by squared or hexagonal passing rod.The two versions are distinguishable by the diameter of the passing rod.The squared one is 8 mm in diameter while the hexagonal one is 7 mm in diameter.
FMM100
100
92.4
0
53.00 606.00
100.00
120.00
100
.00
610.40
80.0
0
30 31
electromechanical / 100EL
ECTR
OM
ECH
AN
ICA
Lm
anual
resc
ue a
ctio
nFM
M For large size shutters Jolly Motor has designed a range of gearmotors suitable for the job.These are 230V A.C./50Hz gearmotors with built-in manual rescue action.Adjusting the endpoints is easily done through a system of small levers, which is very practicalfor this special type of application.
A fundamental feature which makes this range special is the high motor torque which ensuresproper, long lasting functioning. These gearmotors are built upon clients’ specific request.Delivery date is assigned upon receipt of order.
KIT CROWNS AND PULLEYS for series 100 ACCESSORIES for series 100
AM0946PRODUCT:Electromechanical anti-fall device TA 1/2 Ø 30 mm
AM0938-KPRODUCT:Eyelet
AP3501-KTYPE OF TUBE: roundedInt. tube (mm) 97,3
AP3503-KTYPE OF TUBE: roundedInt. tube (mm) 128
AM1392PRODUCT:Support for series 100
100
A range of supports to complete this special line. Worth mentioning among these is the anti-fall device – an indispensable accessory for total safety when working with very large dimensions.
Name FMMCode JM 100/230 JM 100/330
Tube length (mm) 625.9 663.4
Torque (Nm) 230 330
Power (W) 830 980
Speed (rev/min) 12 8
Endpoint rev. (rev/min) 16 16
Type of packaging single single
Packaging 1 1
Weight (Kg) 12,9 12,9
ELEC
TRO
MEC
HAN
ICAL
_ m
anua
l res
cue
actio
n
operator / SHUTTERS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
50 EL.AX
50
22
27
(440) 50019.2
(509.7) 569.7
15
Ø45
35.5
32 33
electronic / series 50EL
.AX
ELEC
TRO
NIC
cabl
e c
om
man
d
ELEC
TRO
NIC
_ ca
ble
com
man
d
The 230V A.C./50Hz, series 50 tubular gearmotor with electronic endstop.Adjusting the endpoints is done through the same wall-mounted commands used to activate it.You can choose between the “maintained action” command (man on) or the automatic one.Both cases only require setting the pre-chosen using the buttons on the wall-mounted key pad.Obstacle detection if combined with a CB pulley (AM 1957).
50
Name EL.AXCode JM 50/8 JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 440 440 500 500 500
Torque (Nm) 8 15 25 35 50
Power (W) 97 120 195 220 270
Speed (rev/min) 13 13 13 13 13
Endpoint rev. (rev/min) - - - - -
Type of packaging single single single single single
Packaging 10 10 10 10 10
Weight (Kg) 2,0 2,2 2,5 2,6 2,9
operator / SHUTTERS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
60 EL.AXEL.AX
60
15
Ø2063
45
Ø16
21.5600
668.7
Ø55
18 1019.2
34 35
electronic / series 60EL
ECTR
ON
ICra
dio
com
man
dEL
.AX
ELEC
TRO
NIC
_ ra
dio
com
man
d
The 230V A.C./50Hz, series 60 tubular gearmotor with electronic endstop.Adjusting the endpoints is done through the same wall-mounted commands used to activate it.You can choose between the “maintained action” command (man on) or the automatic one.Both cases only require setting the pre-chosen using the buttons on the wall-mounted key pad.
60
Name EL.AXCode JM 60/80 JM 60/100 JM 60/130
Tube length (mm) 600 600 600
Torque (Nm) 80 100 130
Power (W) 450 463 563
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) - - -
Type of packaging single single single
Packaging 6 6 6
Weight (Kg) 4,7 4,9 5,0
operator / SHUTTERS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
40 SAT IS FCS/B
40
12
15Ø40
63
20.5
24.1
Ø35
572.651019172.5
36 37
SAT
IS F
CS/
Belectronic / series 40
ELEC
TRO
NIC
radio
com
man
d
ELEC
TRO
NIC
_ ra
dio
com
man
d
The 230V A.C./50Hz, series 40 tubular gearmotor with radio electronic endstopself-learning function which simplifies the adjusting of end points.It is quick and easy to install, and small in size, featuring the raised plate with 12 mm hole.It can be coupled with a range of compatible transmitters that have advancedprogramming and control functions.Obstacle detection if combined with a CB pulley (AM 2121).
40
Name SAT IS FCS/BCode JM 40/8
Tube length (mm) 510
Torque (Nm) 8
Power (W) 114
Speed (rev/min) 16
Endpoint rev. (rev/min) -
Type of packaging single
Packaging 10
Weight (Kg) 1,7
operator / SHUTTERS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
50 SAT IS
50
22
27
(440) 50019.2
(509.7) 569.7
15
Ø45
35.5
38 39
ELEC
TRO
NIC
radio
com
man
delectronic / series 50
SAT
IS The 230V A.C./50Hz, series 50 tubular gearmotor with radio electronicendstop self-learning function which simplifies the adjusting of end points.It is quick and easy to install, and can be coupled with a range of compatibletransmitters that have advanced programming and control functions.Obstacle detection if combined with a CB pulley (AM 1957).
50
Name SAT ISCode JM 50/8 JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 440 440 500 500 500
Torque (Nm) 8 15 25 35 50
Power (W) 97 120 195 220 270
Speed (rev/min) 13 13 13 13 13
Endpoint rev. (rev/min) - - - - -
Type of packaging single single single single single
Packaging 10 10 10 10 10
Weight (Kg) 2,0 2,2 2,5 2,6 2,9
ELEC
TRO
NIC
_ ra
dio
com
man
d
operator / SHUTTERS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
50 SAT SM
50
22
27
(420) 50019.2
(489,7) 569.7
15
Ø45
35.5
40 41
ELEC
TRO
NIC
radio
com
man
delectronic / series 50
SAT
SM
50
Name SAT SMCode JM 50/8 JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 420 420 500 500 500
Torque (Nm) 8 15 25 35 50
Power (W) 97 120 195 220 270
Speed (rev/min) 13 13 13 13 13
Endpoint rev. (rev/min) - - - - -
Type of packaging singolo singolo singolo singolo singolo
Packaging 10 10 10 10 10
Weight (Kg) 2,0 2,2 2,5 2,6 2,9
ELEC
TRO
NIC
_ ra
dio
com
man
d
operator / SHUTTERS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The 230V A.C./ 50Hz series 50 tubular gearmotor with 433.92 MHzradio receiver for electronically adjusting endpoints via transmitter.Torque reduction is suggested when automating boxed awnings.It also allows you to set a third, intermediate end point.
SAT IS60
60
15
Ø2063
45
Ø16
21.5600
668.7
Ø55
18 1019.2
42 43
electronic / series 60SA
T IS
ELEC
TRO
NIC
radio
com
man
d
The 230V A.C./50Hz, series 60 tubular gearmotor with radio electronic endstopself-learning function which simplifies the adjusting of end points.It is quick and easy to install, and can be coupled with a range of compatibletransmitters that have advanced programming and control functions.With 16 x 16 mm pin.
60
Name SAT ISCode JM 60/80 JM 60/100 JM 60/130
Tube length (mm) 600 600 600
Torque (Nm) 80 100 130
Power (W) 450 463 563
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) - - -
Type of packaging single single single
Packaging 6 6 6
Weight (Kg) 4,7 4,9 5,0
ELEC
TRO
NIC
_ ra
dio
com
man
d
operator / SHUTTERS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
44 45
AWNINGSTOTAL PROTECTION AT LAST.
ELECTROMECHANICAL ELECTRONIC
Standard
AWNINGS
Manual rescue action
6050
FCIFCI, JM2 FCI
FCH
6050
FMMFMM-Q, FMM-E
FMM, FMM-TFMM-Q, FMM-E
Cable command Radio command
6050
EL.AXEL.AX SOFT
EL.AXEL.AX SOFT
6050
SAT IS, SAT IS SOFTSAT IS, SAT IS SOFTSAT SM
46 47
Good and bad weather? Today it’s up to you. With Jolly Motor tubular motors you can command the movement of your awning according to your needs and weather conditions. Too much light, too much wind, too much rain: with a simple button you can adjust your system to your liking.Extremely simple to install, Jolly Motor installations can be applied to any type of awning: for verandas, in box form or with extending arms. They feature innovative technology, light, easy movement to safeguard the awning fabric.
total protection at last.
2
4
1
3
5
6
B
7
D
C
A
7
D
JOLLY MOTOR
48 49
ASSE
MBL
ING
Jo
lly M
otor
gea
rmot
ors
in a
wni
ngs
DESCRIPTION:
ASSE
MBL
ING
Jo
lly M
otor
gea
rmot
ors
in a
wni
ngs
The system used to assemble a gearmotor into a winder tube is identical for both shutters and awnings. For both shutters and awnings the pulley-crown and supports can be of different kinds. This depends on the type of limit switch, the dimensions and shape of the winder tube, the roller shutter box features or the wall onto which the gearmotor is assembled.
WEIGHT BEARING BOOM:this is used to support the entire awning-gearmotor assembly. It is directly applied to the wall from which the awning will descend. The two awning arms (B) are assembled onto the weight bearing boom, as are the 2 brackets (D) that fasten the winder tube to the awning.
AWNING ARMS:these serve to guide the awning’s movement. They consist of two metallic bars, joined by a spring; this keeps taut the awning fabric, which is joined at the top end to the winder tube and at the bottom end to the front bar (C), even while the awning wound up. In fact, while the awning is wound up, the spring tension is contrasted and overcome by that transferred by the winder tube to the awning fabric, which causes the two arms to fold onto themselves.
FRONT BAR:is used to fasten the bottom end of the awning fabric.
BRACKETS:are used to fasten the winder tube onto the supporting rod (A).
ASSEMBLING JOLLY MOTOR GEARMOTORS IN AWNINGS assembling / AWNINGS
PULLEY
WINDER tube BRACKETCROWN
SUPPORT
PIN
WINDER TUBE
WEIGHT BEARINGBOOM
SUPPORT withbearing
SQUARE SAFETYINSERT
Pulley fasteningCLIP
CAP
FRONT BAR
Awning ARMS
Awning ARMS
50 FCH
50
48
72
54
4
20
6022
27
(440) 500
(509.7) 569.7
15 19.2
Ø45
35.5
50 51
electromechanical / series 50FC
H
operator / AWNINGS50
ELEC
TRO
MEC
HA
NIC
AL
stan
dar
d
ELEC
TRO
MEC
HAN
ICAL
_ st
anda
rd
Name FCHCode JM 50/8 JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 440 440 500 500 500
Torque (Nm) 8 15 25 35 50
Power (W) 97 120 195 220 270
Speed (rev/min) 13 13 13 13 13
Endpoint rev. (rev/min) 24 24 24 24 24
Type of packaging single single single single single
Packaging 10 10 10 10 10
Weight (Kg) 2,0 2,2 2,5 2,6 2,9
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The 230V A.C./50Hz, series 50 electromechanical tubulargearmotor with progressive screw-adjusted endpoints.While suited for any shutter box, it can be easily installed insmall-size boxes. Its special supports make it unique.
60
60
FCI / JM2 FCI
Ø20
1518 14 19.2
Ø55
672.7
21.5600
33.5
68Ø16
63
50
52 53
ELEC
TRO
MEC
HA
NIC
AL
stan
dar
delectromechanical / series 60
JM2
FCI
FCI
60
Name JM2 FCICode JM2 60/80 JM2 60/100 JM2 60/130
Tube length (mm) 2X600 2X600 2X600
Torque (Nm) 160 200 260
Power (W) 840 990 1314
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) 40 40 40
Type of packaging single single single
Packaging 4 4 4
Weight (Kg) 7,6 8,8 10,0
Name FCICode JM 60/80 JM 60/100 JM 60/130
Tube length (mm) 600 600 600
Torque (Nm) 80 100 130
Power (W) 450 463 563
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) 40 40 40
Type of packaging single single single
Packaging 6 6 6
Weight (Kg) 4,7 4,9 5,0
operator / AWNINGS
ELEC
TRO
MEC
HAN
ICAL
_ st
anda
rd
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
FCI The 1230V A.C./50Hz, series 60 electromechanical tubular gearmotor ideal for large size shutters. Featuring an progressively screw adjustable endstop with 16x16 mm pin and 18 mm length.
JM2 FCI When working with very large sizes, the “coupled motor” formula is ideal. Two gearmotors that work simultaneously managed by a single endstop. Guaranteed to be free of any tube-torsions or warping due to winding up, thanks to this intelligent system, a large centre load does not affect it.
FMM / FMM-T50
50
81 89
62
81
Ø12
62
110
Ø9
22
27
621.3540
24.526.5 19.3
Ø45
35.5
35.5540621.2
26.524.5
19.3
Ø45
110
27
Ø22
9
48
Ø12 72
70
54 55
electromechanical / series 50EL
ECTR
OM
ECH
AN
ICA
Lm
anual
resc
ue a
ctio
n
FMM round
50
FMM
/ F
MM
-T
Name FMM / FMM-TCode JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 540 540 540 540
Torque (Nm) 15 25 35 50
Power (W) 120 195 220 270
Speed (rev/min) 13 13 13 13
Endpoint rev. (rev/min) 24 24 24 24
Type of packaging single single single single
Packaging 6 6 6 6
Weight (Kg) 2,5 2,7 2,9 3,2
operator / AWNINGS
ELEC
TRO
MEC
HAN
ICAL
_ m
anua
l res
cue
actio
n
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The 230V A.C./50Hz, series 50 electromechanical tubular gearmotor with progressive screw-adjusted endpoints.Manual rescue action by 9mm diameter outer shafts, which are specific for eyelet or joint fitted sleeve.The FMM-T version is recognisable thanks to it small, rounded endstop-head shape. Both versionsare compatible with the AM0530 fixing plate and AM1775pin.
FMM-Q / FMM-E
50
Ø12
3751
88
80
62
50 27
22
621.3540
24.526.5 19.3
Ø45
35.5
56 57
electromechanical / series 5050
ELEC
TRO
MEC
HA
NIC
AL
man
ual
resc
ue a
ctio
n
FMM squared
FMM hexagonal
FMM
-Q /
FM
M-E
operator / AWNINGS
ELEC
TRO
MEC
HAN
ICAL
_ m
anua
l res
cue
actio
n
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The 230V A.C./50Hz, series 50 electromechanical tubular gearmotorwith progressive screw-adjusted endpoints.Manual rescue action by squared or hexagonal passing rod.The two versions are distinguishable by the diameter of the passing rod.The squared one is 8mm in diameter while the hexagonal one is 7 mm in diameter.
Nome FMM-Q/ECode JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 540 540 540 540
Torque (Nm) 15 25 35 50
Power (W) 120 195 220 270
Speed (rev/min) 13 13 13 13
Endpoint rev. (rev/min) 24 24 24 24
Type of packaging single single single single
Packaging 6 6 6 6
Weight (Kg) 2,5 2,7 2,9 3,2
FMM
-T
60 FMM
60
Ø20
15
120
Ø9
37.8 19.2728.5
21.5650
Ø5512
010
5
152
90
100
Ø48
58 59
electromechanical / series 60FM
MEL
ECTR
OM
ECH
AN
ICA
Lm
anual
resc
ue a
ctio
n
60
Name FMMCode JM 60/80 JM 60/100 JM 60/130
Tube length (mm) 650 650 650
Torque (Nm) 80 100 130
Power (W) 450 463 563
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) 21 21 21
Type of packaging single single single
Packaging 4 4 4
Weight (Kg) 5,0 5,6 6,3
operator / AWNINGS
ELEC
TRO
MEC
HAN
ICAL
_ m
anua
l res
cue
actio
n
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The 230V A.C./50Hz, series 60 electromechanical tubular gearmotor withprogressive screw-adjusted endpoints.Manual rescue action by 9 mm diameter outer shafts, specifically designed forthe eyelet or joint sleeve.
FMM-Q / FMM-E
60
Ø20
15
88Ø48
62
50
80
Ø55
21.56502128720.5
60 61
electromechanical / series 6060
ELEC
TRO
MEC
HA
NIC
AL
man
ual
resc
ue a
ctio
n
FMM squared
FMM hexagonal
FMM
-Q/E
Name FMM-Q/ECode JM 60/80 JM 60/100 JM 60/130
Tube length (mm) 650 650 650
Torque (Nm) 80 100 130
Power (W) 450 463 563
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) 21 21 21
Type of packaging single single single
Packaging 4 4 4
Weight (Kg) 5,0 5,6 6,3
operator / AWNINGS
ELEC
TRO
MEC
HAN
ICAL
_ m
anua
l res
cue
actio
n
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The 230V A.C./50Hz, series 60 electromechanical tubular gearmotor withprogressive screw-adjusted endpoints. Manual rescue action by squared or hexagonal passing rod.The two versions are distinguishable by the diameter of the passing rod.The squared one is 8 mm in diameter while the hexagonal one is 7 mm in diameter.
50 EL.AX / EL.AX SOFT
50
22
27
(440) 50019.2
(509.7) 569.7
15
Ø45
35.5
62 63
electronic / series 50EL
.AX
/ E
L.AX
SO
FTEL
ECTR
ON
ICca
ble c
om
man
d
ELEC
TRO
NIC
_ ca
ble
com
man
d
EL.AX The 230V A.C./50Hz, series 50 tubular gearmotor with electronic endstop.Adjusting the endpoints is done through the same wall-mounted commands used to activate it.You can choose between the “maintained action” command (man on) or the automatic one.Both cases only require setting the pre-chosen using the buttons on the wall-mounted key pad.
EL.AX SOFT The 230V A.C./50Hz, series 50 tubular gearmotor with electronic endstop. Adjusting the endpoints is done through the transmittercommand function.You can choose between the “maintained action” command (man on) or the automatic one.Both cases only require setting the pre-chosen using the buttons on the wall-mounted key pad.The motor’s final torque can be reduced for gradual and complete closing of the boxed sun awnings.
50
Name EL.AX - EL.AX SOFTCode JM 50/8 JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 440 440 500 500 500
Torque (Nm) 8 15 25 35 50
Power (W) 97 120 195 220 270
Speed (rev/min) 13 13 13 13 13
Endpoint rev. (rev/min) - - - - -
Type of packaging single single single single single
Packaging 10 10 10 10 10
Weight (Kg) 2,0 2,2 2,5 2,6 2,9
operator / AWNINGS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
see p. 92
EL.AXEL.AX / EL.AX SOFT
60
60
15
Ø2063
45
Ø16
21.5600
668.7
Ø55
18 1019.2
64 65
electronic / series 60EL
ECTR
ON
ICca
ble c
om
man
d
EL.AX The 230V A.C./50Hz, series 60 tubular gearmotor with electronic endstop. Adjusting the endpoints is done through the same wall-mounted commands used to activate it. You can choose between the “maintained action” command (man on) or the automatic one. Both cases only require setting the pre-chosen using the buttons on the wall-mounted key pad.
EL.AX SOFT The 230V A.C./50Hz, series 60 tubular gearmotor with electronic endstop. Adjusting the endpoints is done through the same wall-mounted commands used to activate it. You can choose between the “maintained action” command (man on) or the automatic one. Both cases only require setting the pre-chosen using the buttons on the wall-mounted key pad.The motor’s final torque can be reduced for gradual and complete closing of the boxed sun awnings.
EL.A
X /
EL.
AX S
OFT
60
Name EL.AX / EL.AX SOFTCode JM 60/80 JM 60/100 JM 60/130
Tube length (mm) 600 600 600
Torque (Nm) 80 100 130
Power (W) 450 463 563
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) - - -
Type of packaging single single single
Packaging 6 6 6
Weight (Kg) 4,7 4,9 5,0
ELEC
TRO
NIC
_ ca
ble
com
man
d
operator / AWNINGS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
see p. 92
50 SAT IS / SAT IS SOFT
50
22
27
(440) 50019.2
(509.7) 569.7
15
Ø45
35.5
66 67
ELEC
TRO
NIC
radio
com
man
delectronic / series 50
SAT
IS /
SAT
IS S
OFT
SAT IS The 230V A.C./50Hz, series 50 tubular gearmotor with radio electronic endstop self-learning function which simplifies the adjusting of end points. It is quick and easy to install, and can be coupled with a range of compatible transmitters that have advanced programming and control functions.
SAT IS SOFT The 230V A.C./50Hz, series 50 tubular gearmotor with radio electronic endstop self-learning function which simplifies the adjusting of end points.It is quick and easy to install, and can be coupled with a range of compatible transmitters that have advanced programming and control functions. The motor’s final torque can be reduced for gradual and complete closing of the boxed sun awnings.
50
Name SAT IS SOFTCode JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 500 500 500
Torque (Nm) 25 35 50
Power (W) 195 220 270
Speed (rev/min) 13 13 13
Endpoint rev. (rev/min) - - -
Type of packaging single single single
Packaging 10 10 10
Weight (Kg) 2,5 2,6 2,9
Name SAT ISCode JM 50/8 JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 440 440 500 500 500
Torque (Nm) 8 15 25 35 50
Power (W) 97 120 195 220 270
Speed (rev/min) 13 13 13 13 13
Endpoint rev. (rev/min) - - - - -
Type of packaging single single single single single
Packaging 10 10 10 10 10
Weight (Kg) 2,0 2,2 2,5 2,6 2,9
ELEC
TRO
NIC
_ ra
dio
com
man
d
operator / AWNINGS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
see p. 92
SAT IS / SAT IS SOFT60
60
15
Ø2063
45
Ø16
21.5600
668.7
Ø55
18 1019.2
68 69
electronic / series 60SA
T IS
/ S
AT IS
SO
FTEL
ECTR
ON
ICra
dio
com
man
d
SAT IS The 230V A.C. /50 Hz, series 60 electromechanical tubular gearmotor with radio electronic endstop self-learning function which simplifies the adjusting of end points.It is quick and easy to install, and can be coupled with a range of compatible transmitters that have advanced programming and control functions. With 16 x 16 mm pin.
SAT IS SOFT The 230V A.C. /50 Hz, series 60 electromechanical tubular gearmotor with radio electro-nic endstop self-learning function which simplifies the adjusting of end points.It is quick and easy to install, and can be coupled with a range of compatible transmitters that have advanced programming and control functions. With 16 x 16 mm pin.The motor’s final torque can be reduced for gradual and complete closing of the boxed sun awnings.
60
see p. 92
Name SAT IS / SAT IS SOFTCode JM 60/80 JM 60/100 JM 60/130
Tube length (mm) 600 600 600
Torque (Nm) 80 100 130
Power (W) 450 463 563
Speed (rev/min) 12 12 12
Endpoint rev. (rev/min) - - -
Type of packaging single single single
Packaging 6 6 6
Weight (Kg) 4,7 4,9 5,0
ELEC
TRO
NIC
_ ra
dio
com
man
d
operator / AWNINGS
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
50 SAT SM
50
22
27
(420) 50019.2
(489,7) 569.7
15
Ø45
35.5
70 71
ELEC
TRO
NIC
radio
com
man
delectronic / series 50
SAT
SM
50
Name SAT SMCode JM 50/8 JM 50/15 JM 50/25 JM 50/35 JM 50/50
Tube length (mm) 420 420 500 500 500
Torque (Nm) 8 15 25 35 50
Power (W) 97 120 195 220 270
Speed (rev/min) 13 13 13 13 13
Endpoint rev. (rev/min) - - - - -
Type of packaging singolo singolo singolo singolo singolo
Packaging 10 10 10 10 10
Weight (Kg) 2,0 2,2 2,5 2,6 2,9
ELEC
TRO
NIC
_ ra
dio
com
man
d
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The 230V A.C./ 50Hz series 50 tubular gearmotor with 433.92 MHzradio receiver for electronically adjusting endpoints via transmitter.Torque reduction is suggested when automating boxed awnings.It also allows you to set a third, intermediate end point.Featuring obstacle detection coupled with the CB (AM1957) pulley.
operator / AWNINGS
TAPPARELLE
72 73
SCREENTOTAL PROTECTION AT LAST.
ELECTROMECHANICAL ELECTRONIC
Standard
SCREEN
40 50
FC45FC30
FCH
Cable command Radio command
50
EL.AX
40
SAT IS FC45SAT IS FC30
50
SAT ISSAT SM
74 75
Protect while decorating.Simple, linear screens are ideal for our modern lifestyles, where the functionality of sun protection is enhanced by eye-pleasing components of décor. Jolly Motor has brought dynamism to screens by introducing a diversified line of screen-specific motors: these are easy to apply and use, and transfer delicate, harmonious movements to the screens themselves, and so bring to life materials and shapes, livening up colours and transparencies, creating new atmospheres.
total protection at last.
75
40 FC45
40
19647.1
14 590
Ø35
24.1
15
12
26
29
52.5
76 77
ELEC
TRO
MEC
HA
NIC
AL
stan
dar
dFC
45electromechanical / series 40
operator / SCREEN
The 230V A.C./50Hz, series 40 electromechanical tubular gearmotor with progressive screw-adjusted en-dpoints. It is quick and easy to install, and is designed for screen installation and set upto be anchored using 45 or 29 mm, M4 inter-axial screws.This operator is dedicated to tube with 40x2 diameters and AP0718 adaptor kits.
40
Name FC45Code JM 40/4
Tube length (mm) 510
Torque (Nm) 4
Power (W) 115
Speed (rev/min) 25
Endpoint rev. (rev/min) 36
Type of packaging single
Packaging 10
Weight (Kg) 1,7
ELEC
TRO
MEC
HAN
ICAL
_ st
anda
rd
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
see p. 92
40 FC30
40
30
48 20653.1
Ø35
59019 24.1
15
12
78 79
electromechanical / series 40FC
30
The 230V A.C./50Hz, series 40 electromechanical tubular gearmotor with progressive screw-adjusted en-dpoints. It is quick and easy to install, and is designed for screen installation and ready to be anchored using 30 mm, M4 inter-axial screws.
40
Name FC30Code JM 40/4
Tube length (mm) 510
Torque (Nm) 4
Power (W) 115
Speed (rev/min) 25
Endpoint rev. (rev/min) 36
Type of packaging single
Packaging 10
Weight (Kg) 1,7
operator / SCREEN
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
see p. 92
ELEC
TRO
MEC
HA
NIC
AL
stan
dar
d
ELEC
TRO
MEC
HAN
ICAL
_ st
anda
rd
50 FCH
50
48
72
54
4
20
6022
27
(440) 500
(509.7) 569.7
15 19.2
Ø45
35.5
80 81
electromechanical / series 50FC
HEL
ECTR
OM
ECH
AN
ICA
Lst
andar
d
ELEC
TRO
MEC
HAN
ICAL
_ st
anda
rd
The 230V A.C./50Hz, series 50 electromechanical tubular gearmotor with progressive screw-adjusted en-dpoints. Versions with 19 and 38 turns guarantee quicker movement of the screen.
50
Name FCHCode JM 50/8 JMS 50/10
Tube length (mm) 440 500
Torque (Nm) 5 10
Power (W) 97 220
Speed (rev/min) 19 38
Endpoint rev. (rev/min) 24 24
Type of packaging single single
Packaging 10 10
Weight (Kg) 2,0 2,2
operator / SCREEN
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
command and control devices:
see p. 92
50 EL.AX
50
22
27
(440) 50019.2
(509.7) 569.7
15
Ø45
35.5
82 83
electronic / series 50EL
ECTR
ON
ICca
ble c
om
man
d
ELEC
TRO
NIC
_ ca
ble
com
man
d
The 230V A.C./50Hz, series 50 tubular gearmotor with electronic endstop. Adjusting the endpoints is done through the same wall-mounted commands used to activate it. You can choose between the “maintained action” command (man on) or the automatic one. Both cases only require setting the pre-chosen using the buttons on the wall-mounted key pad.The 19-turn version guarantees quicker screen deployment and recovery.EL
.AX
50
Name EL.AXCode JM 50/8
Tube length (mm) 440
Torque (Nm) 8
Power (W) 97
Speed (rev/min) 19
Endpoint rev. (rev/min) -
Type of packaging single
Packaging 10
Weight (Kg) 2,0
operator / SCREEN
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
command and control devices:
see p. 92
40 SAT IS FC45
40
Ø35
570.15101917 24.1
12
15Ø40
52.5
2945
84 85
SAT
IS F
C45
electronic / series 40EL
ECTR
ON
ICra
dio
com
man
d
The 230V A.C. /50 Hz, series 40 electromechanical tubular gearmotor with electronic endstop self-learning function which simplifies the adjusting of end points.It is quick and easy to install, and is designed for screen installation and set up to be anchored using 45 or 29 mm, M4 inter-axial screws. This operator is dedicated to tube with 40x2 diameters and AP0718 adaptor kits.It can be coupled with a range of compatible transmitters that have advanced programming and control functions.
40
Name SAT IS FC45Code JM 40/4
Tube length (mm) 510
Torque (Nm) 4
Power (W) 115
Speed (rev/min) 25
Endpoint rev. (rev/min) -
Type of packaging single
Packaging 10
Weight (Kg) 1,7
ELEC
TRO
NIC
_ ra
dio
com
man
d
operator / SCREEN
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
command and control devices:
see p. 92
40 SAT IS FC30
40
19570.1
17 510 24.1
Ø35 15
12
Ø40
48
26
30
86 87
electronic / series 40EL
ECTR
ON
ICra
dio
com
man
d
The 230V A.C. /50 Hz, series 40 electromechanical tubular gearmotor with radio electronic endstopself-learning function which simplifies the adjusting of end points.It is quick and easy to install, and is designed for screen installation and ready to be anchoredusing 30 mm, M4 inter-axial screws.It is can be coupled with a range of compatible transmitters that have advanced programming and control functions.
SAT
IS F
C30
40
Name SAT IS FC30Code JM 40/4
Tube length (mm) 510
Torque (Nm) 4
Power (W) 115
Speed (rev/min) 25
Endpoint rev. (rev/min) -
Type of packaging single
Packaging 10
Weight (Kg) 1,7
ELEC
TRO
NIC
_ ra
dio
com
man
d
operator / SCREEN
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
command and control devices:
see p. 92
SAT IS50
50
22
27
(440) 50019.2
(509.7) 569.7
15
Ø45
35.5
88 89
electronic / series 50SA
T IS The 230V A.C. /50 Hz, series 50 electromechanical tubular gearmotor with radio electronic endstop
self-learning function which simplifies the adjusting of end points.It is quick and easy to install, and can be coupled with a range of compatible transmitters that have advanced programming and control functions. The 19-turn version guarantees quicker screen deployment and recovery.
ELEC
TRO
NIC
radio
com
man
d
50
Name SAT ISCode JM 50/8
Tube length (mm) 440
Torque (Nm) 8
Power (W) 97
Speed (rev/min) 19
Endpoint rev. (rev/min) -
Type of packaging single
Packaging 10
Weight (Kg) 2,0
ELEC
TRO
NIC
_ ra
dio
com
man
d
operator / SCREEN
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
command and control devices:
see p. 92
50 SAT SM
50
22
27
(420) 50019.2
(489,7) 569.7
15
Ø45
35.5
90 91
ELEC
TRO
NIC
radio
com
man
delectronic / series 50
SAT
SM
50
ELEC
TRO
NIC
_ ra
dio
com
man
d
command and control devices:
Jolly Motor products are coupled to a range of accessories, products designed to enhance the comfort, performance, functionality and safety levels of each automation. From transmitters to control units, from receivers to weather sensors: a vast choice of solutions to customise your Jolly Motor operator to meet your needs.
see p. 92
TRANSMITTERS RECEIVERS CONTROL UNITS ACCESSORIES
The 230V A.C./ 50Hz series 50 tubular gearmotor with 433.92 MHzradio receiver for electronically adjusting endpoints via transmitter.Torque reduction is suggested when automating boxed awnings.It also allows you to set a third, intermediate end point.Featuring obstacle detection coupled with the CB (AM1957) pulley.
operator / SCREEN
Name SAT SMCode JM 50/8 JM 50/15
Tube length (mm) 420 420
Torque (Nm) 8 15
Power (W) 97 120
Speed (rev/min) 13 13
Endpoint rev. (rev/min) - -
Type of packaging single single
Packaging 10 10
Weight (Kg) 2,0 2,2
VAI SUL SICURO.
92 93
command and control devices GUIDE AWNINGS JM
50
FC
H
JM
50
FM
M/-
T/-Q
/-E
JM 5
0 F
MM
/-T/
-Q/-
Ew
ith R
X o
pitio
n
JM
50
SAT
ISJM
50
SAT
IS S
OFT
JM 5
0 S
AT S
M
JM 5
0 E
L.AX
JM 6
0 F
CI
JM 6
0 F
MM
/-Q
/-E
JM 6
0 S
AT IS
JM 6
0 E
L.AX
TRANSMITTERS
TX MINI GREY • • •TX MINI RED • • •TX WALL • • •TX 12 CHANNELS • • •TX 4 CHANNELS • • •TX BUILT-IN (BLANK) • • •TX SINGLE J SAT SM •TX MULTI J SAT SM •CONTROL UNITS AND RECEIVERS
STARLIGHT • • • • • •ALFA S • • • • • •MINI ALFA • • •MINI ALFA D • • •ENJOY • • •CENTRALISATION MODULES
JOL27 • •JOL28 • •CX2-D • • • •CX4-D • • • •X4 • • • •SEQUENTIAL • • • •CXU • •CXE • •WEATHER UNITS
SUN WIND RAIN GUARD • • • • • •RX SUN WIND RAIN GUARD • • • • • •ALFA WIND • • • • • •RADIO WEATHER UNITS
SAT WIND • • •SAT SUN WIND • • •SAT SUN WIND RAIN GUARD • • •SALVATENDA SAT • • •METEO SWR SM •METEO SW SM •SALVATENDA SAT SM •TIMER
SAT TIMER • • •SAT TIMER SM •
SCREENS JM 4
0 F
C45
JM 4
0 F
C30
JM 4
0 S
AT IS
FC
45JM
40
SAT
IS F
C30
JM 5
0 F
CH
S1 19
Rev
.
JM 5
0 F
CH
S1 3
8 Rev
.
JM
50
SAT
IS 19
Rev
.
JM 5
0 E
L.AX
19 R
ev.
TRANSMITTERS
TX MINI GREY • •TX MINI RED • •TX WALL • •TX 12 CHANNELS • •TX 4 CHANNELS • •TX BUILT-IN (BLANK) • •TX SINGLE J SAT SM
TX MULTI J SAT SM
CONTROL UNITS AND RECEIVERS
STARLIGHT • • •ALFA S • • •MINI ALFA • • •MINI ALFA D • • •ENJOY • • •CENTRALISATION MODULES
JOL27 • •JOL28 • •CX2-D • •CX4-D • •X4 • •SEQUENTIAL • •CXU • •CXE •TIMER
SAT TIMER • •SAT TIMER SM
SHUTTERS JM 4
0 F
CS/
B
JM 4
0 S
AT IS
FC
S/B
JM 5
0 F
CH
S1/F
CH
JM 5
0 F
SZ
JM 5
0 F
MM
/-T/
-Q/-
E
JM 5
0 F
MM
/-T/
-Q/-
Ew
ith R
X o
pitio
n
JM 5
0 S
AT IS
JM 5
0 S
AT S
M
JM 5
0 E
L.AX
JM 6
0 F
CI
JM 6
0 F
MI
JM 6
0 F
MM
/-Q
/-E
JM 6
0 S
AT IS
JM 6
0 E
L.AX
TRANSMITTERS
TX MINI GREY • • • •TX MINI RED • • • •TX WALL • • • •TX 12 CHANNELS • • • •TX 4 CHANNELS • • • •TX BUILT-IN (BLANK) • • • •TX SINGLE J SAT SM •TX MULTI J SAT SM •CONTROL UNITS AND RECEIVERS
STARLIGHT • • • • • • •ALFA S • • • • • • •MINI ALFA • • • •MINI ALFA D • • • •ENJOY • • • •CENTRALISATION MODULES
JOL27 • • •JOL28 • • •CX2-D • • • • •CX4-D • • • • •X4 • • • • •SEQUENTIAL • • • • •CXU • • •CXE • •TIMER
SAT TIMER • • • •SAT TIMER SM •
CONTROL UNITSRECEIVERS ST
ARLI
GH
T
ALFA
S
MIN
I ALF
A
MIN
I ALF
A D
ENJO
Y
TRANSMITTERS
TX MINI GREY • • • •TX MINI RED • • • •TX WALL • • • •TX 12 CHANNELS • • • •TX 4 CHANNELS • • • •TX BUILT-IN (BLANK) • • • •TX SINGLE J SAT SM •TX MULTI J SAT SM •TIMER
SAT TIMER • • • •SAT TIMER SM •
WEATHERCONTROL UNITS SU
N W
IND
RAI
N G
UARD
RX
SU
N W
IND
RAI
N G
UARD
ALFA
WIN
D
TRANSMITTERS
TX MINI GREY • •TX MINI RED • •TX WALL • •TX 12 CHANNELS • •TX 4 CHANNELS • •TX BUILT-IN (BLANK) • •TX SINGLE J SAT SM
TX MULTI J SAT SM
TIMER
SAT TIMER • •SAT TIMER SM
WEATHER SENSORS withsensors
COMBY SW A A
COMBY SWR • •CRYSTAL W A A
CRYSTAL SW A A
RADIO WEATHERCONTROL UNITS SA
T W
IND
SAT
SUN
WIN
D
SAT
SUN
WIN
DRAI
N G
UARD
SALV
ATEN
DA S
AT
MET
EO S
WR S
M
MET
EO S
W S
M
SALV
ATEN
DASA
T SM
WEATHER SENSORS withsensors
withsensors
sensors notrequired
withsensors
withsensors
sensors notrequired
COMBY SW A
COMBY SWR •CRYSTAL W A
CRYSTAL SW A
A= TO BE USED IF BOTH PROTECTIONS ARENOT NECESSARY
94 95
command and controldevices
TRAN
SMIT
TERS
2-channle transmitter with stop function. Quick and easy memorisation of end points. Compatible with SAT SMERALDO receivers/motors.
TX SINGLE J SAT SMcode AE5247
TX MINI Greycode AE0992
56-channel transmitter with stop function for a maximum of 28 motors. Liquid crystal screen showing function in use and its location. Quick and easy to manage. Com-patible with SAT SMERALDO receivers/motors.
TX MULTI J SAT SMcode AE5248
TX MINI Redcode AE1011
CODE AE5247RADIO TX
BOX mm 35x72x20
CODE AE5248RADIO TX
BOX mm 50x120x20
supports
WALLSUPPORT code AE2264
Wall for support for the TX SINGLE J AE5247 and AE5263 80x80x22.
WALLSUPPORT code AE2265
Wall for support for the TX SINGLE J AE5247 and AE5263 80x80x22.
TABLESUPPORT code AE2289
Table support for the TX MULTI J AE5248 and AE5264 135x135x42.
CODE AE2264BOX mm 80x80x22
CODE AE2265BOX mm 80x80x22
CODE AE2289BOX mm 135x135x42
94
AC
CES
SO
RIE
S
CODE AE0992RADIO TX
BOX mm 35x50x10
CODE AE1011RADIO TX
BOX mm 35x50x10
2-channel transmitter complete with support. Compatible with SAT IS receivers/motors.
2-channel transmitter complete with support. Compatible with SAT IS receivers/motors.
transmitters
96 97
command and controldevices
TRAN
SMIT
TERS
4-channel transmitter compa-tible with SAT IS receivers/motors.
TX 4 CHANNELScode AE0887
2-channel 230V A.C. flush-mounted transmitter, radio command function for one gearmotor from wall-moun-ted keypad. Compatible with SAT IS receivers/motors.
TX BUILT-IN BLANKcode AE1200
CODE AE0887RADIO TX
BOX mm 75x75x15
CODE AE1200RADIO TX
BOX mm 50x50x25
Wall-mounted 4-channel transmitter complete with support. Compatible with SAT IS receivers/motors.
TX WALLcode AE1174
12-channel mixer. Compatible with SAT IS receivers/motors.
TX 12 CHANNELScode AE1175
CODE AE1174RADIO TX
BOX mm 80x90x20
CODE AE1175RADIO TX
BOX mm 50x130x20
supports supports
WALLSUPPORT code AE1830
Wall support for the AE1175.
CODE AE1830BOX mm 50x130x20A
CC
ESSO
RI
96
WALLSUPPORT Code AE0817
Wall support for the AE1446.
CODE AE0817BOX mm 75x75x15
96
AC
CES
SO
RIE
S
transmitters
98 99
command and controldevices
control units and RX receivers
Wall-mounted radio-receiving control unit for electronic and electro-mechanical motors. RX compatible with SAT IS transmitters. Ready to use with buttons.
STARLIGHTcode AE0822
CODE AE1339RADIO RX
BOX mm Ø 150x40
Wall-mounted radio-receiving control unit for electronic and electro-mechanical motors complete with TX AE0887. Compatible with SAT IS transmitters. Command ready with buttons and safety systems.
Flush-mounted radio-recei-ving control unit for electro-nic and electro-mechanical motors (TX not included). Compatible with SAT IS transmitters.
CODE AE1150RADIO RX
BOX mm 50x50x25
CODE AE1503RADIO RX
BOX mm 125x37x24
ALFA Scode AE1339
MINI ALFAcode AE1150
Receiver control unit for electro-mechanical motors. Compatible withSAT SMERALDO.
ENJOYcode AE1503
Flush-mounted control unit for electronic and electro-mechanical motors. Con-nected to a surface-mounted dynamic button for up-stop-down commands. Compatible with SAT IS transmitters.
CODE AE1618RADIO RX
BOX mm 50x50x25
MINI ALFA Dcode AE1618
CODE AE0822RADIO RX
BOX mm Ø 150x40
CO
NTRO
L UN
ITS
AND
RECEI
VER
S
100 101
centralisation modules
CENT
RALI
SATI
ON
MO
DUL
ES
DIN bar module to centralise electro-mechanical motors. Each motor is associated with a JOL 27 module. IVI compatible. NOT USABLE WITH METEO CONTROL UNITS.
Din bar module for centra-lising three JOL 27 or IVI 87 sub-groups. Compatible with IVI.
Flush-mounted module for centralising 2 electro-mecha-nical motors.
Wall-mounted module for centralising 4 electro-mecha-nical motors.
JOL27code AE1644
JOL28code AE5266
CX2-Dcode AE1640
CX4-Dcode AE1641
X4code AE0449
SEQUENTIALcode AE0664
Sequential control unit with 2 to 10 gearmotors (set up for 2 motors).
Additional module for (AE0664) sequential control unit.
110x120x50 surface-mounted control unit to centralise up to 4 electromechanical gearmotors.
ADDITIONAL SEQUENTIAL MODULEcode AE0665
Flush-mount module for centralising electronic and electro-mechanical motors. Each motor is associated with a CXU control unit. Even for guiding venetian blinds function.
CXUcode AE1327
CODE AE5266DIN
BOX mm 72x90x17,5
CODE AE1640built-in
BOX mm 40x55x23
CODE AE0449
BOX mm 110x120x50
CODE AE1641IP 55
BOX mm Ø 150x40
CODE AE1644DIN
BOX mm 72x90x17,5
CODE AE0664IP 56
BOX mm 240x190x100
CODE AE0665
CODE AE1327built-in
BOX mm 46x46x37
command and controldevices
102 103
Flush-mount module for cen-tralising EL.AX motors. Each motor is associated with a CXE control unit.
CXEcode AE1326
SUN WIND RAIN GUARDcode AE1580
RX SUN WIND RAINcode AE1581
WEATHER receiver control unit for electronic and electro-mechanical motors for sun, wind and rain protection, complete with TX AE0887. Compatible with SAT IS transmitters.
WEATHER control unit for electronic and electro-mecha-nical motors for sun, wind and rain protection.
CODE AE1326built-in
BOX mm 46x46x18
centralisation modules
CENT
RALI
SATI
ON
MO
DUL
ES
CODE AE1580IP 55
BOX mm Ø 150x40
CODE AE1581IP 55
RADIO RX
BOX mm Ø 150x40
command and controldevices
Wind protection WEATHER control unit receiver for electronic and electro-mecha-nical motors. Complete with 50445Y wind sensors and 22239Y bracket and TX AE0887 transmitters. Compa-tible with SAT IS transmitters.
ALFA WINDcode AE1338
CODE AE1338IP 55
RADIO TX
BOX mm Ø 150x40
weather control units
104 105
radio weather control units
RAD
IO W
EATH
ERCO
NTRO
L UN
ITS
WEATHER radio control unit, for wind protection, complete with 50445Y wind sensor
WEATHER radio transmitter control unit for sun and wind protection, complete with 50446Y sun and 50445Y wind sensors.
WEATHER radio transmitter control unit for sun, wind and rain protection, without sensors. Compatible with SAT IS receivers/motors.
SAT WINDcode AE0821
SAT SUN WINDcode AE0944
SAT SUN WIND RAINcode AE1203
METEO SWR SMcode AE1441
METEO SW SM WITH SENSORcode AE5307
Radio transmitter WEATHER control unit for sun, wind and rain protection, complete with sensors. Compatible with SAT SMERALDO recei-vers/motors.
WEATHER radio transmitting device for wind protection (vibrating). Compatible with SAT IS receivers/motors.
WEATHER radio transmitting sun, wind and rain protection control unit complete with sensors. Compatible with SAT SMERALDO receivers/motors.
SALVATENDA SATcode AE1271
WEATHER radio transmitting device for wind protection (vibrating). Compatible with SMERALDO receivers/motors.
SALVATENDA SAT SMcode AE5313
CODE AE0944IP 55
RADIO TX
BOX mm Ø 150x40
CODE AE1203IP 55
RADIO TX
BOX mm Ø 150x35
CODE AE0821IP 55
RADIO TX
BOX mm Ø 150x40
CODE AE5313RADIO TX
BOX mm 70x40x10
CODE AE1441IP 44
RADIO TX
BOX mm
CODE AE05307IP 44
RADIO TX
BOX mm
CODE AE1271IP 44
RADIO TX
BOX mm 70X40X10
command and controldevices
106 107
ANEMOMETERcode 50445 Y
SUN SENSORcode 50446 Y
Sun sensor, compatible with weather control unit with sun protection.
12V rain sensor.The heated surface avoids condensing.Compatible with weather control units with rain protection.
Anemometer compatible with all wind protection control units.
Bracket for wind sensor.
Group of sun, wind and rain sensors for quick wall-moun-ted weather control unit.
Group of sun, wind and rain sensors for quick wall-moun-ted weather control unit.
Wind sensor complete with bracket.
Wind/sun sensor complete with bracket.
COMBY SWcode AE1398
COMBY SWRcode AE1397
CRYSTAL Wcode AE1277
CRYSTAL SWcode AE1278
CODE 50445 YIP 44
BOX mm 100X110X100
CODE 50446 YIP 55
BOX mm 40X60X40
CODE 50927 Y
BOX mm 55X95X25
CODE AE1397IP 44
BOX mm 420x150x220
CODE AE1277IP 44
BOX mm 100x95x100
CODE AE1278IP 44
BOX mm 100x95x100
CODE AE1398IP 44
BOX mm 420x150x220
CODE 22239 Y
BOX mm 50X120X30
RAIN SENSORcode 50927 Y
BRACKET FOR WIND SENSORcode 22239 Y
weather sensors
WEA
THER
SEN
SORS
command and controldevices
108 109
Bracket for wind/rain sensor.
Bracket for sun/wind/rain sensor.
BRACKET FOR WIND/RAIN SENSORcode 22120 Y
BRACKET FOR SUN/WIND/RAIN SENSORcode 22085 Y
SAT TIMER code AE0993
timer
Battery-powered transmit-ting control unit for weekly programming. Weekly programming of 6 daily commands and up/down automatic command function connected to dawn and dusk of the selected country. Com-patible with SAT SMERALDO receivers/motors.
SAT TIMER SMcode AE5312
Battery-powered transmitting control unit for weekly pro-gramming. Weekly program-ming of 6 daily commands and up/down automatic com-mand function connected to dawn and dusk of the selected country. Compatible with SAT IS receivers/motors.
CODE 22085 Y
BOX mm 110x180x30
CODE 22120 Y
BOX mm 100x190x30
CODE AE0993RADIO TX
BOX mm 85x85x13
CODE AE5312RADIO TX
BOX mm 85x85x13
weather sensors
WEA
THER
SEN
SORS
command and controldevices
110 111
command and controldevices
rescue groups
CO
MM
AND
AND
CO
NTRO
L D
EVIC
ES
Surface-mounted button with return.
CODE AE1804
Surface-mounted switch box with return.
CODE AE1803
HELP rescue group complete with portable (600VA) emer-gency battery. For all motors including the series 40 and series 50 up to JM 50/35.
HELP rescue group complete with portable (1000VA) emer-gency battery. For all motors with torque greater than 35Nm from JM 50/35 motor to the JM 60/130.
HELP 600code AE1473
HELP 1000code AE1474
Flush-mounted HELP switch-box.
Surface-mounted HELP switch-box.
SWITCH-BOXcode AE0737
SWITCH-BOXcode AE0738
CODE AE1474BATTERY 1000VA
CODE AE1473BATTERY 600VA
CODE AM0738ASSEMBLING surface
CODE AM0737ASSEMBLING built-in
Plate with button.
CODE AE1928
Switch plate.
CODE AE1927
SWITCH-BOXcode AE1804
SWITCH-BOXcode AE1803
PLATEcode AE1928
PLATEcode AE1927
switches and buttons
112 113
switches and buttons
Pair of surface-mounted non interblocked buttons.
CODE AE0729
Pair of flush-mounted non interblocked buttons.
CODE AE0728
Double switch with wall plaque and box.
Double non interblocked button with wall plaque and box.
SWITCHcode AE5270
BUTTONcode AE5283
CODE AE5283
CODE AE5270
Pair of surface-mounted non interblocked buttons with square plaque.
CODE AE0730
BUTTONcode AE0729
BUTTONcode AE0728
non interblocked buttons for EL.AX
BUTTONcode AE0730
command and controldevices
CO
MM
AND
AND
CO
NTRO
L D
EVIC
ES
114 115
special devices
Key-fob transponder.
Surface mounted key switch with aluminium alloy case, lock and cylinder-protecting small door.
TRANSPONDERcode AE5321
KEY SWITCHcode AE5112
Transponder card in ISO7810-7813 format.
CODE AE5322
CODE AE5112
CODE AE3521
Flush mounted key switch with aluminium alloy case, lock and cylinder-protecting small door.
Stand-alone transponder sensor for cards, key-fobs and TAG for maximum 250 users.
KEY SWITCHcode AE5249
TRANSPONDER SENSORcode AE5320
CODE AE5320
CODE AE5249ASSEMBLING built-in
TRANSPONDER CARDcode AE5322
command and controldevices
CO
MM
AND
AND
CO
NTRO
L D
EVIC
ES
116 117
mechanicalaccessories
safety devices for shutters
MEC
HANI
CAL
ACCES
SORI
ES
Jolly Block pair with 5 elements per octagonal Ø 60 mm tube.
Jolly Block pair with 7 elements per octagonal Ø 60 mm tube.
JOLLY BLOCKcode AM0871
JOLLY BLOCKcode AM0872
CODE AM0877PIECES 1
TUBE mm Ø 70
CODE AM0876PIECES 1
TUBE mm Ø 60
Jolly Block pair with 5 elements per octagonal Ø 70 mm tube.
Jolly Block pair with 7 elements per octagonal Ø 70 mm tube.
JOLLY BLOCKcode AM0873
JOLLY BLOCKcode AM0874
CODE AM0872PIECES 2
TUBE mm Ø 60
CODE AM0871PIECES 2
TUBE mm Ø 60
CODE AM0874PIECES 2
TUBE mm Ø 70
CODE AM0873PIECES 2
TUBE mm Ø 70
JOLLY BLOCKcode AM0877
JOLLY BLOCKcode AM0876
Compensation ring for octa-gonal Ø 60 mm tube.
Compensation ring for octa-gonal Ø 70 mm tube.
118 119
clic clac
Right-hand safety device for series 50.
Right-hand safety device for series 40.
CLIC CLACcode AM1310
CLIC CLACcode AM1311
CODE AM2121SERIES 50
CODE AM1957SERIES 50
Left-hand safety device for series 50.
Left-hand safety device for series 40.
CLIC CLACcode AM1315
CLIC CLACcode AM1316
CODE AM1311SERIES 40
CODE AM1310SERIES 50
CODE AM1316SERIES 40
CODE AM1315SERIES 50
PULLEY CB40code AM2121
PULLEY CB50code AM1957
Pulley for CONTROL BLOCK function for EL.AX and SAT IS series 50 motors.
Pulley for CONTROL BLOCK function for SAT IS series 40 motors.
pulleys
mechanicalaccessories
MEC
HANI
CAL
ACCES
SORI
ES
120 121
shells and adapters
Ø 60 mm octagonal, telesco-pic shell (with Ø 12 mm pin).
Ø 70 mm octagonal, telesco-pic shell (with Ø 12 mm pin).
SHELLcode AM0652
SHELLcode AM0653
CODE AM1902
CODE AM0653
CODE AM0652
Ø 60 mm octagonal shell with Ø 12 mm pin.
Ø 70 mm octagonal shell with Ø 12 mm pin.
SHELLcode AM0947
SHELLcode AM0939
CODE AM0939
CODE AM0947
SHELLcode AM1902
Ø 40 mm shell with Ø 7,5 mm pin. Only for series 40 with AP0715.
CODE AM1890
SHELLcode AM1890
Ø 50 mm shell (with 10x10 mm squared pin) (*) only for series 40 with AP0716.
mechanicalaccessories
MEC
HANI
CAL
ACCES
SORI
ES
122 123
technical accessories
accessories for manual rescue action
TECHN
ICAL
ACCES
SORI
ES
45° cardan joint with eyelet for 8 mm squared bar.
90° cardan joint with eyelet for 8 mm squared bar.
CARDANJOINTcode AM1790
CARDANJOINTcode AM1785
White 150 cm articulated arm with hook.
Eyelet.
ARTICULATEDARMcode AM1782
EYELETcode AM0588
90° cardan joint with eyelet for 7 mm hexagonal bar.
Black eyelet.
CARDANJOINTcode AM2029
BLACK EYELETcode AM2018
Black eyelet for manual rescue action FMM-Q.
45° cardan joint withØ 9 mm hole eyelet.
BLACK EYELET
code AM1834
CARDANJOINTcode AM1792
Black eyelet for manual rescue action FMM-E.
5 hole extension.
BLACK EYELETcode AM1835
EXTENSIONcode AM0580
1 hole extension.
Sleeve connector.
EXTENSIONcode AM0581
SLEEVE CONNECTORcode AM0182
Plastic eyelet for manual rescue action FMM.
PLASTIC EYELETcode AM2323
124 125
technicalaccessories
support
TECHN
ICAL
ACCES
SORI
ES
Support for FMM motors series 60.
SUPPORTFOR MOTORScode AM0521A
Fixing plate for FMM series 50, compatible with FMM-Q/E series 50 and 60.
FIXING PLATE
code AM0662
10x10 mm 45°/90° pin, com-patible with FMM and FMM -T series 50.
Cross support.
PINcode AM1775
CROSSSUPPORTcode AM0522
Support for series 60 manual rescue action motors.
SUPPORTFOR MOTORScode AM0521
100x100 mm fixing plate compatible with FMM and FMM-T series 50
FIXING PLATEcode AM0530
Pin support with threaded holes specific for FMM-Q/E series 50.
Multi-hole plate with pin, spe-cific for FMM-Q/E series 50.
PIN SUPPORTcode AM0530A
MULTI-HOLEPLATEcode AM1823
45°/90° plate with squared pin, specific for FMM-Q/E series 50.
PLATE code AM1824
Support for series 60 tubular FMM-Q/E gearmotors.
SUPPORTFOR MOTORScode AM2445
AM0515AM0553
4868
25
126 127
supports series 40
Screw support for existing brackets.
SCREWSUPPORTcode AM0523
Support with 60 mm distan-ce between holes.
SUPPORT
code AM0526
100x100 mm plate support.
PLATESUPPORTcode AM0600
Plastic plate ideal for FCS/B.
Plastic plate ideal for FCS/B.
PLASTIC PLATE
code 51480 Y
PLASTIC PLATE
code 44565 Y
Standard support.
STANDARD SUPPORTcode AM0511
Adjustable support.
Inox - Support for awnin-gs with 48 mm distance between holes.
ADJUSTABLESUPPORTcode AM0513
SUPPORT
code AM0515
Support with 48 mm distan-ce between holes.
SUPPORT code AM0553
Set of white varnished sup-ports for indoor roller blinds, complete with AP1902. Only for series 40.
VARNISHEDSUPPORTScode AM1901
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
128 129
adaptor plates series 40
52.5 x 26 mm adaptor plate with centre line.
ADAPTORPLATEcode 34326 Y
47x26 mm adaptor plate with Ø 14 mm centre hole.
ADAPTORPLATEcode 43387 Y
72x26 mm adaptor plate with Ø 11 mm centre hole.
62,8x26 mm plate support for 51408Y/44565Y.
ADAPTORPLATEcode 35159 Y
ADAPTORPLATEcode 34322 Y
Adaptor plate.
ADAPTORPLATEcode 31245 Y
30x26 mm adaptor plate with 10x12 mm pin.
ADAPTORPLATEcode 24517 Y
30x26 mm adaptor plate with 7x14.5 mm pin.
30x26 mm adaptor plate with 10x7 mm pin.
ADAPTORPLATEcode 24571 Y
ADAPTORPLATEcode 24849 Y
30x26 mm adaptor plate with central cross.
ADAPTORPLATE code 31244 Y
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
AM0515AM0553
4868
25
130 131
supports series 50
Screw support for existing brackets.
SCREWSUPPORTcode AM0523
Support with 60 mm distan-ce between holes.
SUPPORTcode AM0526
100x100 mm plate support.
Cross support.
PLATESUPPORTcode AM0600
CROSSSUPPORTcode AM0522
Fast support.
Mini-case set complete with plastic, AM0823 support and pre-inserted screws.
FAST SUPPORTcode AM0823
MINI-CASE SETcode AM1885
Standard support.
STANDARD SUPPORT code AM0511
Adjustable support.
Inox - Support for awnin-gs with 48 mm distance between holes.
ADJUSTABLESUPPORTcode AM0513
SUPPORTcode AM0515
Support with 48 mm distan-ce between holes.
SUPPORT code AM0553
supports Ø 60
Adjustable support. Lets you unwind the shutters in case of emergency.
ADJSTABLESUPPORTcode AM0500
Screw support for existing brackets. Lets you unwind the shutters in case of emergency.
Plate support for awnings.
SCREWSUPPORTcode AM0510
PLATESUPPORTcode AM0765
Plate support for awnin-gs with 48 mm distance between holes.
SUPPORTcode AM0906
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
132 133
bearing supports
Ø 28 mm metal bearing with 12 hole.
METAL BEARINGcode AM0656
Ø 28 mm bearing support.
Ø 42 mm nylon bearing with 12 hole.
SUPPORT FORBEARING code AM0655
NYLON BEARING code AM0661
Ø 42 mm metal bearing with 12 hole .
METAL BEARING
code AM0657
Ø 28 mm metal bearing with 12 hole.
METAL BEARING
code AM5318
safety insert series 50
Flexible adjustment exten-sion for gearmotors with electromechanical endstops.
ADJUSTMENTEXTENSIONcode 43063 Y
Black galvanised squared safety insert.
SAFETYINSERTcode 11653N Y
adjustment extension
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
47X1
40X1
50X1,5
50X2
40X2
40X0,6deprat
40X0,6
45X0,5
134 135
adaptor kits for tubular motors series 40
40 mm series adaptor kits for gearmotors.
PROFILE OF COMPATIBLE TUBES
KIT AP0714CODE AP0714PULLEY 41967
CROWN 40761
CODE AP0715PULLEY 41968
CROWN 40769
CODE AP0716PULLEY 41969
CROWN 40759
CODE AP0717PULLEY 22197
CROWN 20884
40 mm series adaptor kits for gearmotors.
KIT AP0715
40 mm series adaptor kits for gearmotors.
KIT AP0716
40 mm series adaptor kits for gearmotors.
KIT AP0717
40 mm series adaptor kits for gearmotors.
KIT AP0718CODE AP0718PULLEY 22967
CODE AP0710PULLEY 41961
CROWN 40718
CODE AP0711PULLEY 41962
CROWN 40788
CODE AP0713PULLEY 22165
CROWN 20827
40 mm series adaptor kits for gearmotors.
KIT AP0710
40 mm series adaptor kits for gearmotors.
KIT AP0711
40 mm series adaptor kits for gearmotors.
KIT AP0713
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
50X1,5
63X1,5
101,9x2
101,9x3,5
60x1,6
63X1,75
105x2,75
69,5x1,5 70x1,5 70x1,65
103x2,5
62,5x0,75
136 137
50 mm series adaptor kits for gearmotors.
Profile of compatible tubes
KIT AP0909CODE AP0909PULLEY 42212
CODE AP0918PULLEY 22290
CROWN 22291
CODE AP0905PULLEY 42215
CROWN 42561
CODE AP0906PULLEY 42217
CROWN 43543
ADATTATORE 42570
50 mm series adaptor kits for gearmotors.
KIT AP0918
50 mm series adaptor kits for gearmotors.
KIT AP0905
50 mm series adaptor kits for gearmotors.
KIT AP0906
50 mm series adaptor kits for gearmotors.
KIT AP0920
CODE AP0928PULLEY 22598
CROWN 22582
CODE AP0948PULLEY 24823
CROWN 42539
50 mm series adaptor kits for gearmotors.
KIT AP0930
50 mm series adaptor kits for gearmotors.
KIT AP0928
50 mm series adaptor kits for gearmotors.
KIT AP0948
CODE AP0920PULLEY 22294
CROWN 23545
ADATTATORE 42570
CODE AP0930PULLEY 22599
CROWN 23544
ADATTATORE 42570Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
technicalaccessories
adaptor kits for tubular motors series 50
TECHN
ICAL
ACCES
SORI
ESTE
CHN
ICAL
ACCES
SORI
ES
62,8x0,9
63x1,75
65x2
77,5x1
62,8x1 Dohner74
84,5x1
63x1 63x1 63X1
63x1,25 77,5x178x1
Dohner 78x1 78x1
78x1 78x1,25 78x1,25
85x1 Imbac85x1,2 85x1,25
78x1
78x1,25 78x1,25 81x1,3
85x1,25
62,8x0,9 62,8x1 63x1 63x1 63x1
138 139
50 mm series adaptor kits for gearmotors.
Profile of compatible tubes
KIT AP0925
CODE AP0919PULLEY 22292
CROWN 22293
CODE AP0934PULLEY 23102
CROWN 42539
CODE AP0931PULLEY 22290
CROWN 23585
50 mm series adaptor kits for gearmotors.
KIT AP0919
50 mm series adaptor kits for gearmotors.
KIT AP0934
50 mm series adaptor kits for gearmotors.
KIT AP0931
50 mm series adaptor kits for gearmotors.
KIT AP0932
CODE AP0915PULLEY 42220
CROWN 42601
CODE AP0917PULLEY 22288
CROWN 22289
ADATTATORE 42570
50 mm series adaptor kits for gearmotors.
KIT AP0922
50 mm series adaptor kits for gearmotors.
KIT AP0915
50 mm series adaptor kits for gearmotors.
KIT AP0917
CODE AP0932PULLEY 42213
CROWN 22580
CODE AP0922PULLEY 22298
CROWN 42535
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
CODE AP0925PULLEY 22596
CROWN 22293A
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
adaptor kits for tubular motors series 50
86x1
89x1
53,5x1
52,2x0,8
89 Deprat
Axion 2000Deprat
53,5x1
65
66x1,25
140 141
50 mm series adaptor kits for gearmotors.
Profile of compatible tubes
KIT AP0926
CODE AP0914PULLEY 42213
CROWN 42539
50 mm series adaptor kits for gearmotors.
KIT AP0927
50 mm series adaptor kits for gearmotors.
KIT AP0904
50 mm series adaptor kits for gearmotors.
KIT AP0914
50 mm series adaptor kits for gearmotors.
KIT AP0902
CODE AP0901PULLEY 22205A
CROWN 42574
CODE AP0900PULLEY 42201
CROWN 42584
50 mm series adaptor kits for gearmotors.
KIT AP0933
50 mm series adaptor kits for gearmotors.
KIT AP0901
50 mm series adaptor kits for gearmotors.
KIT AP0900
CODE AP0902PULLEY 42204
CROWN 42534
CODE AP0933PULLEY 42205
CROWN 42574
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
CODE AP0926PULLEY 22597
CROWN 23582
ADATTATORE 42570
CODE AP0927PULLEY 42216
CROWN 43581
ADATTATORE 42570
CODE AP0904PULLEY 42216
CROWN 43576
ADATTATORE 42570
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
adaptor kits for tubular motors series 50
59x0,6
59x0,7
ZF 54x0,5
59,4x0,6
49,8X1,5
5059,6x0,8 60x0,8 Deprat 60x0,8
58,1x0,8 59x0,6
70 70X0,9 70X1 70,5X1,25 71X1 71,2X1,5 71,5X1,5
58
142 143
50 mm series adaptor kits for gearmotors.
Profile of compatible tubes
KIT AP0924
CODE AP0911PULLEY 42595
CROWN 42538
50 mm series adaptor kits for gearmotors.
KIT AP0946
50 mm series adaptor kits for gearmotors.
KIT AP0916
50 mm series adaptor kits for gearmotors.
KIT AP0911
50 mm series adaptor kits for gearmotors.
KIT AP0912
CODE AP0907PULLEY 42214
CROWN 42228
CODE AP0936PULLEY 43469
CROWN 42600
50 mm series adaptor kits for gearmotors.
KIT AP0923
50 mm series adaptor kits for gearmotors.
KIT AP0907
50 mm series adaptor kits for gearmotors.
KIT AP0936
CODE AP0912PULLEY 42219
CROWN 42571
CODE AP0933PULLEY 42212
CROWN 32299
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
CODE AP0924PULLEY 42203
CROWN 42532
CODE AP0946PULLEY 42203B
CROWN 42531
CODE AP0916PULLEY 42202
CROWN 42531
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
adaptor kits for tubular motors series 50
57x1,5
58x0,8
70x1
ZF 64x0,5
71x1,5
ZF 80x1ZF 64x0,6
64,1x0,8 64,7x1
ZF 80x1,2ZF 64x0,8
71x2
ZF 64x0,5 ZF 64x0,6 ZF 64x0,8
144 145
50 mm series adaptor kits for gearmotors.
Profile of compatible tubes
KIT AP0945
CODE AP0908PULLEY 42207
CROWN 42533
50 mm series adaptor kits for gearmotors.
KIT AP0921
50 mm series adaptor kits for gearmotors.
KIT AP0913
50 mm series adaptor kits for gearmotors.
KIT AP0908
50 mm series adaptor kits for gearmotors.
KIT AP0910A
CODE AP0903PULLEY 42211
CROWN 42541
CODE AP0949PULLEY 44678
CROWN 42540
50 mm series adaptor kits for gearmotors.
KIT AP0929
50 mm series adaptor kits for gearmotors.
KIT AP0903
50 mm series adaptor kits for gearmotors.
KIT AP0949
CODE AP0910APULLEY 42209A
CROWN 42537A
CODE AP0929PULLEY 23012
CROWN 23584
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
CODE AP0945PULLEY 44392
CROWN 44391
CODE AP0921PULLEY 22296
CROWN 22297
CODE AP0913PULLEY 42210
CROWN 42540
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
adaptor kits for tubular motors series 50
56,8
45,7
56,860
62
50.8
6
57.9
33
O 49,7
46.7
59,4x0,6 59,6x0,8 60x0,8 Deprat 60x0,8
59x0,6
Axion 2000Deprat
ZF 54x0,5
52,2x0,8
70 70X0,9 70X1 70,5X1,25 71X1 71,2X1,5 71,5X1,5
146 147
50 mm series adaptor kits for gearmotors.
Profile of compatible tubes
KIT AP0950
CODE AP0954PULLEY 45136
CROWN 42600
50 mm series adaptor kits for gearmotors.
KIT AP0952
50 mm series adaptor kits for gearmotors.
KIT AP0953
50 mm series adaptor kits for gearmotors.
KIT AP0954
50 mm series adaptor kits for gearmotors.
KIT AP3507
50 mm series adaptor kits for gearmotors.
KIT AP3508
CODE AP3507PULLEY 45042
CROWN 42584
CODE AP3508PULLEY 45041
CROWN 42571
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
CODE AP0950PULLEY 44761
CROWN 42531
CODE AP0952PULLEY 45096
CROWN 42532
CODE AP0953PULLEY 45137
CROWN 42539
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
adaptor kits for tubular motors series 50
66,7
84 94
102,5x2,584
86
90x1,5
105x2,5
148 149
60 mm series adaptor kits for gearmotors.
Profile of compatible tubes
KIT AP2585
CODE AP2583PULLEY 41563
CROWN 43581
60 mm series adaptor kits for gearmotors.
KIT AP2582
Kit adattatori per motoriduttori serie60 mm
KIT AP2584
60 mm series adaptor kits for gearmotors.
KIT AP2583
Kit adattatori per motoriduttori serie 60 mm
KIT AP2566
CODE AP2556PULLEY 22556
CROWN 23544
CODE AP2547PULLEY 41547
CROWN 43543
60 mm series adaptor kits for gearmotors.
KIT AP2557
Kit adattatori per motoriduttori serie60 mm
KIT AP2556
60 mm series adaptor kits for gearmotors.
KIT AP2547
CODE AP2566PULLEY 41563
CROWN 43576
CODE AP2557PULLEY 22557
CROWN 23545
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
CODE AP2585PULLEY 41585
CROWN 43569
CODE AP2582PULLEY 21600
CROWN 23582
CODE AP2584PULLEY 21600
CROWN 23580
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
adaptor kits for tubular motors series 60
133x3
78
Dohner 78
ZF 80
Butzbach85
70
115x1,5
Butzbach85
150 151
60 mm series adaptor kits for gearmotors.
Profile of compatible tubes
KIT AP2555
CODE AP2586PULLEY 41586
CROWN 43577
60 mm series adaptor kits for gearmotors.
KIT AP2591
Kit adattatori per motoriduttori serie60 mm
KIT AP2558
60 mm series adaptor kits for gearmotors.
KIT AP2586
Kit adattatori per motoriduttori serie 60 mm
KIT AP2549
CODE AP2567PULLEY 41567
CROWN 43567
CODE AP2587PULLEY 41587
CROWN 43541
60 mm series adaptor kits for gearmotors.
KIT AP2548
Kit adattatori per motoriduttori serie60 mm
KIT AP2567
60 mm series adaptor kits for gearmotors.
KIT AP2587
CODE AP2549PULLEY 41549
CROWN 43575
CODE AP2548PULLEY 41548
CROWN 43571
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
Profile of compatible tubes
CODE AP2555PULLEY 41555
CROWN 43555
CODE AP2591PULLEY 41630
CROWN 43578
CODE AP2558PULLEY 41603
CROWN 43572
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
adaptor kits for tubular motors series 60
85
152 153
60 mm series adaptor kits for gearmotors.
Profile of compatible tubes
KIT AP2573CODE AP2555PULLEY 41631
CROWN 43537
technicalaccessories
TECHN
ICAL
ACCES
SORI
ES
adaptor kits for tubular motors series 60
154 155
load tables
Tube diam. (mm)
Load (Kg)
LOAD SERIES 40 for shutter up to 2 m
Tube diam. (mm)
Tube diam. (mm)
Load (Kg)
Load (Kg)
LOAD SERIES 50 for shutter up to 2 m
LOAD SERIES 60 for shutter up to 2 m
load tables
application diagram for sun awnings
LOAD
TAB
LES ARM WITH 15 Kg POWER
ARM WITH 25 Kg POWER
ARM WITH 35 Kg POWER
ARM WITH 45 Kg POWER
N° Arm
N° Arm
N° Arm
N° Arm
Rohr (mm)
Rohr (mm)
Rohr (mm)
Rohr (mm)
Overhang
Overhang
Overhang
Overhang
156 157
As testified by the CE marking, Jolly Motor International products meet the essential safety requirements set out by the applicable European Directives:DIRECTIVE 73/23 CEE – Electric Directive (Low Voltage)Modified by directive 93/68/CEE. The essential requirements of the directive have been verified by applying the following standards:DIN EN 60335-1:2001-08; EN60335-1-94+A1+A2+A11 to A16:2001DIN EN 60335-2-97 (VDE 0700-97):2007-11; EN 60335-2-97:2006
DIRECTIVE 89/336/CEE – Electro-magnetic CompatibilityModified by directives 92/31/CEE - and 93/68/CEE. The essential requirements of the directive have been verified by applying the following standards:EN 55014-1: 2000+A1+A2 ; EN 55014-2: 1997 + A1:2001 ; EN 61000-3-2: 2000 ; EN 61000-3-3:1995 + A1:2001EN 60336-2-97: 2007; EN 60336+A1;EN 50366:2006-11 ; EN50366:2003+A1:2006
Conformity to the essential requirements of the Low Voltage Directive is furthermore certified by other valid bodies, as shown in the following table: The following gearmotors are also certified as “Recognized Components” by the Underwriters Laboratories Inc. (Canada & U.S.A.):
purchase of jolly motor items implies acceptance of the conditions of sale
PRODUCT CERTIFICATION
VDE Certified Products
Motor Model JM serie 40/4, 8, 10 JM serie 50/8, 10, 15, 20, 25, 35, 50
JMA serie 40/4, 8, 10 JM serie 60/80,100, 130
End stop Model JM serie 40/4, 8, 10, SAT IS FCH, FCI, FMI, FCZ, , SAT IS, EL.AX, JM serie 50/ … FMM-E
JM serie 50 / …. SAT SM JM serie 50/ … FMM-Q
JM serie 50/ … FMM-T
JM serie 60/ … FMM
JM serie 60/ … FMM-E
JM serie 60/ … FMM-Q
IMQ – NF Certified Products
Serie 40 Serie 50 Serie 60
Motor Model JM serie 40/4, 8, 10 JM serie 50/8, 10, 15, 20, 35, 50 JM serie 60/80, 100, 130
End stop Model FCI, FMI, FC30, FC45, FCH FCI, FMI,
FCS/B
CCC Certified Products
The certificates are issued by CQC (China Qualità Certification Center) in compliance with standard GB12350-2000
Motor Model
JM serie 40/4, 8, 10
JM serie 50/8, 10, 15, 25, 35, 50
JM serie 60/80,100, 130
UL Certified Products
The following gearmotors are also certified as “Recognized Components” by the Underwriters Laboratories Inc. (Canada & U.S.A.):
Motor Model
End stop Model
Series 40
MX40 4/30
MX40 8/19
MX40 10/15
FCI
FMI
FC30
FC45
FCS/B
SAT
Series 50
MX50 5/38
MX50 10/23
MX50 12/19
MX50 15/15
MX50 10/38
MX50 20/23
MX50 24/19
MX50 30/15
MX50 15/38
MX50 30/23
MX50 37/19
MX50 45/15
FCH
FCZ
FMM-E
FMM-Q
FMM-T
SAT
Series 60
MX60 80/14
MX60 100/14
FCI
FMI
FMM
FMM-E
FMM-Q
158
ORDER AND ORDER CONFIRMATION – all orders must be sent in writing by fax, mail or email. The order date will be that in which the document is received and that appearing on the order document. Once received, confirmation is issued complete with all the conditions and detail of applicable prices and is sent to the client to check over and accept.
The client must accept the order in written form, and sign in the “sign for acceptance” box, then fax the accepted order back to Jolly Motor. At this stage the order is fully complete and is passed on to production. If nothing transpires within 48 hours of the sending of the confirmation, the same shall be deemed as tacitly accepted in its entirety.
SHIPMENT AND DELIVERY DATE – Deliveries are usually made 3 weeks from the accepted order date. Any special requirements will be agreed, time by time, with the client and depending on production schedules. Any delays due to force majeure cannot warrant any indemnification for damages nor annulment of the order. The goods are always delivered ex works, and can, upon request, be delivered carriage free, charged on the invoice.PRICES – the listed prices are in EURO. This price list may be changed at any time without prior warning if costs of any nature were to increase. Prices do not include VAT, bank expenses and any other fiscal increase.PAYMENTS – payments must be made via bank order within 60 days following the end of the month with respect to the invoice date, unless particularly agreed otherwise with Jolly Motor. For any payment delays or irregularities Jolly Motor reserves the right to apply what is set forth in European directive 2000/35/CE as concerns payments, and the same will immediately suspend all supply of goods until the overdue payment is received. Payments made by check or bills are accepted subject to collection. Goods sold belong to the seller until total payment has been received for them.GUARANTEE – all of the products on the catalogue are backed by a basic 2-year guarantee starting from the production date appearing on each product bearing the Jolly Motor trademark or any other own trademark. Excluded from this are geared motors with electro-mechanical limit switches and manual action, electronic components and relative accessories that are already covered by the basic guarantee.APPLICATION OF THE GUARANTEE – the guarantee covers any manufacturing flaws and is limited to repairs or replacement of any flawed piece, with no other reimbursements of sorts or extensions on the guarantee. Jolly Motor does not accept returned goods without having given its prior agreement (by way of the RMA procedure which must be requested from the Commercial department). Any pieces replaced under warranty remain the property of Jolly Motor. Shipping costs, even for items repaired under guarantee are charged to the client, either when being shipped back to Jolly Motor or back to the client. The guarantee is exclusively applied to Jolly Motor products and not to the project or system into which said products are being fitted, and requires no obligation to intervene on the application location, but exclusively in the machine shop where they were manufactured.LIMIT TO THE GUARANTEE – the guarantee does not cover the following: normal wear and tear, wrong set up or not following the assembly instructions (i.e. powering anything other than doors of sorts and awnings in homes) and, in general, from stocking conditions, usage conditions, environmental and weather conditions, chemical, electric or otherwise, which are inappropriate or not specified at the time of ordering. The guarantee immediately expires if the product is tampered with or the geared motors are employed for scopes other than those intended, or with electrical and mechanical accessories that are not approved by our technical service. Jolly Motor is not liable for damage, direct or indirect, to people or things due to improper electric or mechanical installation, and in case not compliant to what is specified in the instruction booklet. Expenses related to the breaking down or reassembly of materials under guarantee cannot in any case be taken into consideration.USE OF THE PRODUCTS AND INSTALLATION – All necessary precautions must be taken to ensure a state-of-the-art installation for proper functioning of the motor system / application. Nominal loads for which the motors have been designed must be respected, as must be the (IP44) protection ratings shown on the ID tag, and the warnings and limitations for assembly and installing shown in the instructions that come with the product. Jolly Motor motors and automation devices are engineered to be applied on doors and awnings in construction (i.e. shutters, awnings, screens, etc..) which do not require intensive use. Said products must be always and in any case be installed CEI electrical standards and other current, specific legislation. If Jolly Motor products are re-sold to any third parties, the latter must accept the guarantee conditions specified by Jolly Motor International. Jolly Motor International’s liability with respect to third parties cannot exceed that which Jolly Motor International has with the first direct buyer.REPAIRS – Repairs are made within 4 weeks from receiving the material at our warehouse. If the client wishes to receive an estimate of the repairs, this must be stated during the “request for authorisation on returns” phase. Jolly Motor does not accept any claims for repair expenses that are made known following the repairs with the usual report and Jolly Motor will consider, on a case-by-case basis, even the age and defect level of the item, and convenience or otherwise to repair. In the latter case the item will be considered as unfit to repair and returned to the client. Even if the item is free of any flaws, and is checked or tested or considered unfit to be repaired, Jolly Motor will charge € 10,00 for each product. Packaging and transport expenses payable by the client when shipping to us or back to the client.PACKAGING – When the goods are received by the client, the client should receive and verify the proper state and point out any reservations to the delivery person stating them on the Transport Papers. The goods, even when delivered carriage paid, charged or not on the invoice, travel at the addressee’s risk and peril.CHECKS AND CLAIMS – the addressee must check the goods when receiving them. This requires checking the state, weight, quantity and product type. No claim can be considered after 10 days of receiving the goods. Any disputes shall be processed by the Court of Rovereto (TN).
purchase of jolly motor items implies acceptance of the conditions of sale
GENERAL CONDITIONS OF SALE