Post on 09-Mar-2018
transcript
1
PRODUCT DATA SHEET
DB-PDB-5
CT PEDESTALThe CT Pedestal impresses with its clear design and very high level of functionality. It is the mobile ad-dition to office furniture that makes offices appear practical, flexible and modern.
With its cubical shape, it makes its presence felt in the workplace, offering storage space for documents and personal items.
2
PRODUCT DATA SHEET
DB-PDB-5
PRODUCT DESCRIPTION
The three pedestal types differ according to carcass size and usage purpose.
· with castors (hard / soft) · free-standing
· together with adjustment legs · below the desk, left or right · can be connected to fixed or height-adjustable desks · connection fittings replace the desk slab-end
adjustment legs can be levelled up to + 20 mm.
1
2
3
4
Rear wall: 19 mm chipboardVisible sides: 19 mm chipboardTop panel: as 19 mm chipboard, 25 mm1 chipboard, 13 mm1 compact boardFront:16 mm chipboard
1 only for fixed pedestalRear wall and visible sides together form the carcass and therefore always have the same design.
13
4
2
Mobile pedestal Supporting pedestal
OVERVIEW & DIMENSIONS
330 mm / 430 mm600 mm / 800 mm548 mm (9 HE = height units) / 598 mm (10 HE)
330 mm / 430 mm600 mm / 800 mm548 mm (9 HE = height units) / 598 mm (10 HE)
WDH
· together with adjustment legs · free-standing · attached to desk at fixed height · attached to height-adjustable desk · without top panel as continuous table top (only for desks with fixed heights) · across two desks
Fixed pedestal
330 mm / 430 mm600 mm / 800 mm740 mm (12 HE)
3
PRODUCT DATA SHEET
DB-PDB-5
LOCK
Lock with replaceable cylinder, including 2 keys (1 of them is foldable) and locking bar. Optional without lock and lock hole but with locking bar.
FIXED PEDESTAL TOP
CONTINUOUS TABLETOP
The top can be extended to the rear using an excess length of top panel, depending on the pedestal use. This option exists for fixed pedestals.
If a fixed pedestal is to be connected to a table with a fixed height, then a continuous tabletop can be selected.
MOBILE PEDESTAL SEAT PADThe mobile pedestal can be optionally provided with a seat pad whose dimensions vary according to pedestal width. The seat pad is fastened with pressure lock or Velcro fasteners. Maximum load: 75 kg
· for 330 mm pedestal width: W x D 315 x 415 mm · for 430 mm pedestal width: W x D 415 x 415 mm
Material and colour: Inn (fabric_01)
OPTIONS
ANTI-TIPPING PROTECTION
An anti-tipping protection is provided for pedestals with a front division comprising 6 HE drawers. A counterweight or supporting roller can be selected for this. The required number depends on the pedestal type, front division and drawer type.
CounterweightConcrete plate fastened to the inside of the rear wall.
Supporting rollerIs mounted in front on the lower-most drawer. Colour: black.
4
PRODUCT DATA SHEET
DB-PDB-5
Front divisions - mobile pedestal and supporting pedestal, 9 HE
Front divisions - fixed pedestal, 12 HEFront divisions - mobile pedestal and supporting pedestal, 10 HE
DRAWERS
The pedestal front is either provided with a vertical grip groove or with a push-to-open function. Drawers with push-to-open function open comfortably at the light press of a finger.
Drawer front
1-2-3-3 1-2-2-4 1-2-6 3-3-3 3-6
1-2-3-6 1-2-3-3-3 1-3-3-3 1-2-3-4 1-3-6 3-3-4
Metal drawers with full or partial pull-out · Interlock system · Self-closing mechanism with/without shock absorber · Push-to-open function6 HE drawers at the bottom are configured with full pull-outs, but can be optionally configured with partial pull-outs. For 6 HE drawers, the anti-tipping protection is implemented as a counterweight or optionally as a supporting roller.
HE = height unit with 50 mm nominal heightExample: 9 HE (1-2-3-3) corresponds to 50 mm – 100 mm – 150 mm – 150 mm.
Full pull-outPull-out length Pull-out length
useful depth
useful height
Pedestal depth pull-out length useful depth1
600 mm 365 mm 490 mm800 mm 495 mm 690 mm Drawer width drawer inner width1
330 mm 227 mm 330 mm430 mm 327 mm 430 mm
Drawer height nominal height useful height1
2 HE 100 mm 90 mm 3 HE 150 mm 140 mm 4 HE 200 mm 190 mm 6 HE 300 mm 290 mm 3 HE top 150 mm 156 mm
Pedestal depth pull-out length useful depth1
600 mm 540 mm 490 mm800 mm 740 mm 690 mm Drawer width drawer inner width1
330 mm 227 mm 330 mm430 mm 327 mm 430 mm
Drawer height nominal height useful height1
2 HE 100 mm 90 mm 3 HE 150 mm 140 mm 4 HE 200 mm 190 mm 6 HE 300 mm 290 mm 3 HE top 150 mm 156 mm
OPTIONS
1 inner width
Partial pull-out system
5
PRODUCT DATA SHEET
DB-PDB-5
OPTIONAL BUILT-IN COMPONENTSHANGING CRADLE FOR 6 HE DRAWERSMaterial and colour: Legs made from black synthetic material, frame made of nickel-plated steel profile.
INDEX CARD TRAYMaterial and colour: Synthetic material platinum.
Swivel plates for card index traysMaterial and colour: Synthetic material platinum.
STAMP HOLDER
ACCESSORY EXTENSION ACCESSORY TRAY
STATIONARY INSERT 430 MMSTATIONARY INSERT 330 MM
LENGTH DIVIDER WIDTH DIVIDER
A4 landscape format A4 landscape formatA5 landscape format A5 landscape formatA6 landscape format A6 landscape format
NON-SLIP MAT
Standard XL(for 430 mm width)
258 x 348 mm for all pedestal widths
6
PRODUCT DATA SHEET
DB-PDB-5
Mobile pedestal with vertical grip groove with front division 1-2-3-3 HE. Width 430 mm, depth 600 mm. Carcass, top and front in melamine basic colours.
Mobile pedestal with vertical grip groove with front division 1-2-6 HE. Width 430 mm, depth 600 mm. Carcass and top in melamine basic colours. Front in melamine accent colours. With seat pad.
Mobile pedestal with vertical grip groove with front division 3-3-3 HE. Width 330 mm, depth 600 mm. Carcass and top in melamine basic colours. Front in melamine accent colours. With seat pad.
Mobile pedestal with vertical grip groove with front division 1-2-3-3 HE. Width 330 mm, depth 600 mm. Carcass and top in melamine basic colours. Front in melamine wooden texture.
Mobile pedestal with vertical grip groove with front division 3-3-3 HE. Width 430 mm, depth 600 mm. Carcass in melamine basic colours. Front and top in melamine décor colours.
Mobile pedestal with vertical grip groove with front division 3-6 HE. Width 430 mm, depth 600 mm. Carcass, front and top in melamine basic colours.
INSPIRATIONS
7
PRODUCT DATA SHEET
DB-PDB-5
COLOURS & MATERIALS
MW white
MA aluminium
AR maple
CE elm white
TX mustard
CO coco
MS slate
EI oak
MB basalt
NG walnut greyBH beech light
MT anthraciteMQ office white MC canvas MP platinum TM clay
MELAMINE: Basic colours
MELAMINE: Décor colours
MELAMINE: Décor colours with texture
MELAMINE: Accent colours
MELAMINE: Additional basic colours
EC oak moreda
EA oak aragon
TS fern greenTH marino blue
8
PRODUCT DATA SHEET
DB-PDB-5
COLOURS & MATERIALS
VENEER: Walnut VENEER: Bamboo
VENEER: Maple VENEER: OakVENEER: Beech
EY oak, silt
NF americ. walnut
AK canad. maple ER oak, amaretto
NB walnut, umbraNR walnut, sienna
BG beech, grey EV oak, volcano
NA wal., anthracite BJ bamboo
EG oak grey
KD chestnut natural KP chestnut brown KQ chestnut grey
VENEER: Chestnut
9
PRODUCT DATA SHEET
DB-PDB-5
BENE WORKS SUSTAINABLY
CT PEDESTAL LEED POINTS
Bene plays a leading role in responsible environmental management. It is practised throughout all company divisions—from product development, procurement, production and logistics to product recycling. Bene considers ecology to be a central element of its responsible and sustainable corporate strategy. Bene sees the legal regulations as minimum requirements and strives for better and more sustainable environmental protection throughout the group. The Bene principle in environmental policy is: Avoidance — Minimisation — Recycling — Disposal.
The Leadership in Energy and Environmental Design (LEED) is a system to classify ecological construction, which was developed by the U.S. Green Building Council. As an internationally recognised standard, LEED defines numerous standards for environmentally friendly, resource protecting and sustainable construction. The use of the CT Pedestal is an important contribution to LEED certification. The following criteria for this are from “LEED 2009 for Commercial Interiors”:
CT PEDESTAL MATERIAL COMPONENTS*
MR Credit 4 Recycled content up to 2 points
MR Credit 5 Regional materials up to 2 points
MR Credit 7 Certified wood up to 1 point
IEQ Credit 4.5 Materials that are low in harmful substances up to 1 point
CT PEDESTAL — ECOLOGICAL STANDARDS · 98.60 % recyclable · 67.40 % of contents are renewable raw materials · 63.98 % of contents are recycled product materials (32.09 % post-consumer, 31.88 % pre-consumer) · 44.49 % of contents are recycled product materials that comply with LEED (32.09 % post-consumer, 31.88 % pre-consumer) · Resource-conserving product design · Use of certified wood (chain of custody) · Use of materials tested for presence of hazardous substances · No PVCs, chromium, lead or mercury · Individual parts can be sorted according to homogeneous categories · Recyclable with positive CO2 footprint contribution (average 43.70 kg CO2)
Environment-related information about Bene: www.bene.com / sustainability
* Average values based on 6 different models.Total weight of reference model: 33.60 kg
Plastic1.09 kg / 3.23 %
Steel8.46 kg / 25.17 % Wood
23.84 kg / 70.90 %
Zinc0.14 kg / 0.41 %
Adhesives0.01 kg / 0.04 %
Fabrics0.08 kg / 0.25 %
20.139
(on request)