Post on 13-Apr-2018
transcript
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
Oticon Alta2 is built on the Inium Sense platform. Alta2 audiology provides its users with premium listening performance and can be adjusted to the individual's listening preferences. Based on VAC+ rationale and Soft Speech Booster, Alta2 allows factoring in differences in loudness perception and optimising the listening experience in soft sounds.
The Alta2 family styles range from compact in-the-ear styles to a broad palette of behind-the-ear styles. The style range includes the new smaller non-wireless IIC & CIC 75 V2 which fits even more users due to its smaller size.
Soft Speech BoosterSoft Speech Booster is a feature of VAC+ that provides increased level of soft gain at high frequencies. The feature en-hances the details of soft speech signals and is adapted to client’s individual needs and preferences for soft sounds and soft speech. The new Soft Sound Perception trimmer in Genie adjusts how the soft gain provided by Soft Speech Booster is delivered to each client.
YouMatic PremiumYouMatic is a personal automatic system programmed to the client’s individual needs and sound preferences. YouMatic controls the sound processing across multiple environments by adjusting the response, directionality, noise management, transient management and compression.
Speech Guard ESpeech Guard is a signal processing system that preserves speech dynamics and speech patterns, as these are impor-tant and essential information for the auditory system. Speech Guard E is optimised to better line up with the dynamic range of speech in order to pre-serve more of the speech cues.
Speech Guard E maintains audibility, prevents discomfort and safeguards speech envelopes by combining the advantages of both fast and slow-acting compression.
Inium Sense feedback shieldInium Sense feedback shield significantly reduces whistling without compromising sound quality or comfort.
Family Features ❍ Speech Guard E ❍ Spatial Noise Management ❍ Spatial Sound Premium ❍ Binaural Processing ❍ Binaural Synchronisation ❍ Binaural Coordination ❍ YouMatic Premium ❍ Soft Speech Booster ❍ Voice Aligned Compression (VAC+) ❍ Fitting Bandwidth 10 kHz ❍ Inium Sense feedback shield ❍ Free Focus Premium ❍ Learning ❍ Memory ❍ T-coil ❍ AutoPhone Program ❍ Power Bass (streaming) ❍ Music Widening (streaming) ❍ TriState Noise Management ❍ Transient Management ❍ Multi-band Adaptive Directionality ❍ NAL-NL1, NAL-NL2 and
DSL v5.0a m[i/o] ❍ Flexible miniFit receiver system ❍ ConnectLine and Remote Control ❍ DAI input and FM option ❍ In-situ audiometry (Genie) ❍ IP68 water & dust resistant certified
(all custom instruments) ❍ IP58 water resistant certified (all
behind the ear instruments)
PRODUCT INFORMATIONOTICON ALTA2 PRO
OTICON ALTA2
F I T T I N G R A N G E
8
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
8
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
Accessories Type/info Use with
Tamper resistant battery drawer Available in 7 coloursAvailable in 8 colours
RITE, miniBTE, BTE13 and BTE13 105miniRITE
DAI adaptor AP900AP1000
BTE13 and RITEBTE13 105
Dedicated FM receiver Amigo R12 BTE13 and RITE
FM adaptor FM 9FM10Compatible with Amigo R2 and other universal receivers
BTE13BTE13 105
A C C E S S O R I E SF I T T I N G L E V E L SRITE BTECustom
70 dB
60 dB
90 dB
105 dB
Custom mould Corda miniFit
OSPL90 (peak) Ear simulator 131 dB SPL 126 dB SPL 135 dB SPL 138 dB SPL 2cc coupler 121 dB SPL 117 dB SPL 126 dB SPL 133 dB SPLFull-on gain (peak) Ear simulator 62 dB 61 dB 68 dB 73 dB 2cc coupler 53 dB 51 dB 60 dB 67 dB
B T E S T Y L E S
designRITE miniRITE RITE10 312 312
8 65-75 80-110 80-110¢ ¢ ¢
¢ ¢ ¢
¢ ¢
¢ ¢
¢
¢ ¢
¢ ¢ ¢
¢
Cable #3directly
FlexConnect Programmingshoe
127 dB SPL 115 dB SPL 127 dB SPL 132 dB SPL 135 dB SPL117 dB SPL 105 dB SPL 118 dB SPL 124 dB SPL 125 dB SPL
62 dB 46 dB 65 dB 66 dB 73 dB53 dB 35 dB 55 dB 57 dB 61 dB
miniBTE BTE13 BTE13 105Battery size 312 13 13
Fitting levels Battery life (h)* 115-140 85-190 100-200Wireless ¢ ¢ ¢
Directional ¢ ¢ ¢
Program control ¢ ¢ ¢
Volume control ¢ ¢ ¢
Telecoil ¢ ¢
AutoPhone ¢ ¢ ¢
ConnectLine/Remote Control compatible ¢ ¢ ¢
FM compatible ¢ ¢
Optional programming interface, cable #3 Cable #3 directly
Programming shoe
Cable #3 directly
PRODUCT OVERVIEW
¢ Default � Option
* Real usage battery life is shown as an estimated interval based on measure-ments with variable amplification settings and variable input levels.
R I T E S T Y L E S
Mould Bass & Power dome
Open dome
Alta2 Pro only
32 3
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
100
-10
2030405060708090
100110120
125 Hz250 500 1k 2k 4k 8k
dB HL
OSPL90 (peak) Ear simulator 119 dB SPL 126 dB SPL 130 dB SPL 135 dB SPL 2cc coupler 109 dB SPL 117 dB SPL 121 dB SPL 127 dB SPLFull-on gain (peak) Ear simulator 49 dB 59 dB 64 dB 71 dB 2cc coupler 38 dB 50 dB 54 dB 62 dB
I T E S T Y L E S
Battery size 10 312 13
Fitting levels Battery life (h)1 95-100 75-135 140-250Wireless � � �
Directional � ¢
Program control �2 � �
Volume control �2 � �
Telecoil � �
AutoPhone � �
ConnectLine / Remote Control compatible � � �
FM compatibleOptional programming interface, cable #3 Programming Adaptor Mini3
FlexConnect Mini4FlexConnect Mini FlexConnect Mini
CICIIC
ITCITE - Half Shell
ITE - Full Shell
PRODUCT OVERVIEW
Wax protection Sound output, non-wireless IIC and CIC3 ProWax miniFit
Sound output, wireless and non-wireless instruments4 ProWax
Microphone inlet, 10 battery instruments T-Cap
Microphone inlet, 312 and 13 battery instruments O-Cap
Instruments with 312 battery may be produced with horizontal battery drawer depending on ear geometry.
Oticon optimises fitting level and venting by default according to hearing loss, requested instrument style and ear geometry.
¢ Default � Option
1) Real usage battery life is shown as an estimated interval based on measurements with variable ampli-fication settings and variable input levels.
2) Option only available for CIC
3) Non-wireless IIC & CIC 75 V2 instru-ments from November 2016
4) Wireless instruments and non-wire-less from before November 2016
I T E S T Y L E S
IIC is only available as Alta2 Pro 75
4 5
Oticon Alta2 instruments are programmed using the Genie 2015.2 fitting software or higher compatible with NOAH 3 or higher.
Wireless fitting - FittingLINKFittingLINK provides a wireless link (Bluetooth) between the PC and one or two wireless enabled hearing instruments. In addition FittingLINK can be used via a USB cable connected to the PC.
Cabled fittingUse programming cable #3.
G E N E R A L F I T T I N G
Operating conditions Temperature: +1°C to +40°CRelative humidity: 5% to 93%, non-condensing
Storage and transportation conditions
Temperature and humidity shall not exceed the below limits for extended periods during transportation and storage.
Temperature: -25°C to +60°CRelative humidity: 5% to 93%, non-condensing
C O N D I T I O N S
C O L O U R S E L E C T I O N
R I T E & B T E S T Y L E S
A D D I T I O N A L C O L O U R S
C U S T O M S T Y L E S
01 Beige
02 Light Brown
03 Medium Brown
04 Dark Brown
05 Black
06 Transparent
P O W E R F L E X M O U L D S
04Dark Brown
03Medium Brown
01Beige
02Light Brown
63Diamond Black
99Pale Lime
05Black
93Chestnut Brown
73Carbernet Red
94Terracotta
66Mother of Pearl
90Chroma Beige
95Vivid Lilac
44Silver
68Midnight Blue
69Sunset Orange
91Silver Grey
92Steel Grey
IIC & CIC only
miniRITE designRITE47Cool Blue
PRODUCT OVERVIEW
Sound hook Interchangeable standard and child hook, both damped and undamped, for BTE13 105.
Interchangeable standard and child hook for BTE13 85 and BTE13 100.
Interchangeable standard and child hook for miniBTE 85.
Damper Damping plug available for BTE13 85 and miniBTE 85. Optional for BTE13 100.
Thin tubes Corda miniFit (0.9 mm tube) for miniBTE 85 and BTE13 85.
Corda miniFit Power (1.3 mm tube) for BTE13 100 and BTE13 105.
Thin tubes are available in lengths -1–4. Style specific adapters must be used when connecting thin tubes.
ProWax Micro mouldLiteTip
Receiver unit Must use miniFIT 80 receiver available in lengths 1-5.
Receiver connector to instruments
Type C3 (marked on packaging).
ProWax miniFit miniFit receiver 80
ProWax Micro mouldLiteTip
Only available in Alta2 Pro
Receiver unit Must use miniFit receivers.
Select between three receiver types with different output performance, labelleds according to fitting capabilities: 60, 85 and 100.
60, 85 lengths 0–5100 lengths 1–5
Power Flex mould Select between two Power Flex moulds, 100 and 105, with different output performance
Receiver wire Separate wires connect Power Flex moulds to the instruments, available in lengths 1–5.
Receiver connector to instrument
Type C1 (marked on packaging).
ProWax miniFit miniFit receivers 60, 85 and 100.
ProWax Power Flex mouldMicro mouldLiteTip
Ear pieces All miniFit receivers and Corda miniFit tubes must use miniFit ear pieces.
LiteTip and micro mould (requires taking an impression).
miniFit domes
Type Sizes
Open dome 6, 8, 10 mm
Power dome 6, 8, 10, 12 mm
Bass dome, single vent 6, 8, 10, 12 mm
Bass dome, double vent 6, 8, 10, 12 mm
Grip Tip, no vent S & L
Grip Tip, large vent S & L
B T E S T Y L E S
d e s i g n R I T E
m i n i R I T E & R I T E
R I T E & B T E S T Y L E S
6 7
Features Oticon Alta2 Pro Oticon Alta2
Fitting formulas VAC+, NAL, DSL VAC+, NAL, DSL
Speech Guard E Yes Yes
Soft Speech Booster Yes Yes
Spatial Noise Management Yes No
Spatial Sound Premium No
Binaural Processing (compression) Yes No
Binaural Synchronisation (automatics) Yes Yes
Binaural Coordination (PB operations) Yes Yes
YouMatic Premium Premium
Personal Profiles 5 5
Transient Management Yes Yes
Fitting Bandwidth* 10 kHz 10 kHz
Inium Sense feedback shield Yes Yes
Free Focus Premium Premium
Automatics Tri mode Tri mode
Back dir Yes Yes
Power Bass Yes Yes
Music Widening Yes Yes
Special Purpose programs (music, lecture etc.) Yes Yes
Learning Yes Yes
Fitting Bands 10 10
Frequency channels 16 16* Bandwidth accessible for gain adjustments during fitting NOTE: designRITE and IIC are only available in Alta2 Pro
10
20
30
40
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
_Pro
_IIC
_FO
G_7
11_S
− 1
4−10
−201
3 −
kbn
_tjn
− 1
6:33
:32
70
80
90
100
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
_Pro
_IIC
_Fre
q60d
b_71
1_S
− 1
4−10
−201
3 −
kbn
_tjn
− 1
6:32
:51
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
P084
_Int
iga−
i_10
_711
_OSP
L90
− 1
7−11
−201
1 −
str
_lo
− 0
9:34
:08
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
P084
_Int
iga−
i_10
_2cc
_OSP
L90
− 2
1−11
−201
1 −
str
_lo
− 1
3:25
:28
10
20
30
40
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
P084
_Int
iga−
i_10
_2cc
_FO
G −
02−
01−2
012
− s
tr_l
o −
11:
02:2
3
70
80
90
100
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
P084
_Int
iga−
i_10
_2cc
_FR
ESP
− 0
2−01
−201
2 −
str
_lo
− 1
1:04
:58
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MPO
_711
_ITC
75 −
05−
10−2
012
− s
tr_l
o −
11:
43:0
8
10
20
30
40
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
FOG
_711
_ITC
75 −
05−
10−2
012
− s
tr_l
o −
13:
44:1
2
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MPO
_2cc
_ITC
75 −
05−
10−2
012
− s
tr_l
o −
11:
42:4
5
10
20
30
40
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
FOG
_2CC
_ITC
75t
− 0
5−10
−201
2 −
str
_lo
− 1
1:39
:10
70
80
90
100
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MT_
711_
ITC
75 −
05−
10−2
012
− s
tr_l
o −
11:
48:4
2
70
80
90
100
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MT_
2cc_
ITC
75 −
05−
10−2
012
− s
tr_l
o −
11:
49:5
7
CUSTOM 75 (IIC ONLY)OTICON ALTA2 PRO
8 9
Technical informationAll measurements are made on instruments with ProWax receiver and T-Cap microphone protection.
Scale 1:1 IIC Non-wireless.
OSPL90
Full-on Gain
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
OSPL90
Full-on Gain
Frequency Response Frequency Response
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours*Size: 10 (IEC PR70)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environmentNote: For custom instruments, the maximum gain is customised for optimal size and performance.
CUSTOM 75OTICON ALTA2 PRO
OTICON ALTA2
OSPL90
Full-on Gain
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
OSPL90
Full-on Gain
Frequency Response Frequency Response
Technical informationAll measurements are made on instruments with ProWax and T-Cap or O-Cap protection. Omnidirectional mode is used unless other-wise stated.
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours*Size: 10 (IEC PR70) / 312 (IEC PR41) / 13 (IEC PR48)IRIL (IEC 60118-13-2011)IRIL (IEC 60118-13-2011) for IIC and CIC* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environmentNote: For custom instruments, the maximum gain is customised for optimal size and performance.
Scale 1:1
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
121 dB SPL 109 dB SPL112 dB SPL 103 dB SPL110 dB SPL 103 dB SPL
45 dB 36 dB41 dB 33 dB40 dB 34 dB
- -100-9600 Hz 100-8500 Hz
- -- -- -
<2 % 2.0 %<2 % <2 %<2 % <2 %
21 dB SPL 18 dB SPL- -
0.7 mA 0.7 mA0.7 mA 0.7 mA
135
800/1400/2000 MHz: 16/16/<9 dB SPL
119 dB SPL 109 dB SPL112 dB SPL 104 dB SPL110 dB SPL 105 dB SPL
49 dB 38 dB43 dB 35 dB41 dB 35 dB36 dB 27 dB
100-9500 Hz 100-8500 Hz73 dB SPL -93 dB SPL -
- 82/82 dB SPL2.0 % <2 %2.0 % <2 %3.0 % 2.0 %
22 dB SPL 20 dB SPL31 dB SPL 29 dB SPL
1.0 mA 1.0 mA1.0 mA 1.0 mA
135/140/260
800/1400/2000 MHz: 28/44/37 dB SPL800/1400/2000 MHz: 17/33/26 dB SPL
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MPO
_711
_ITC
85
− 0
5−10
−201
2 −
str
_lo
− 1
1:56
:06
20
30
40
50
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
FOG
_711
_ITC
85
− 0
5−10
−201
2 −
str
_lo
− 1
1:57
:25
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MT_
711_
ITC
85 −
05−
10−2
012
− s
tr_l
o −
11:
54:5
2
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MPO
_2cc
_ITC
85
− 0
5−10
−201
2 −
str
_lo
− 1
1:56
:35
20
30
40
50
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
FOG
_2cc
_ITC
85
− 0
5−10
−201
2 −
str
_lo
− 1
1:57
:54
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MT_
2cc_
ITC
85 −
05−
10−2
012
− s
tr_l
o −
11:
55:2
8
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MPO
_711
_ITC
90
− 0
5−10
−201
2 −
str
_lo
− 1
3:24
:33
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
FOG
_711
_ITC
90
− 0
5−10
−201
2 −
str
_lo
− 1
3:28
:37
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MPO
_2cc
_ITC
90
− 0
5−10
−201
2 −
str
_lo
− 1
3:27
:43
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
FOG
_2cc
_ITC
90
− 0
5−10
−201
2 −
str
_lo
− 1
3:29
:14
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MT_
711_
ITC
90 −
05−
10−2
012
− s
tr_l
o −
13:
30:0
9
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
MT_
2cc_
ITC
90 −
05−
10−2
012
− s
tr_l
o −
13:
31:0
1
Technical informationAll measurements are made on instruments with ProWax and T-Cap or O-Cap protection. Omnidirectional mode is used unless other-wise stated.
Scale 1:1
OSPL90
Full-on Gain
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
OSPL90
Full-on Gain
Frequency Response Frequency Response
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L / RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours*Size: 10 (IEC PR70) / 312 (IEC PR41) / 13 (IEC PR48)IRIL (IEC 60118-13-2011)IRIL (IEC 60118-13-2011) for IIC and CIC* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environmentNote: For custom instruments, the maximum gain is customised for optimal size and performance.
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
10
CUSTOM 85OTICON ALTA2 PRO
OTICON ALTA2
11
CUSTOM 90OTICON ALTA2 PRO
OTICON ALTA2
OSPL90
Full-on Gain
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
OSPL90
Full-on Gain
Frequency Response Frequency Response
Technical informationAll measurements are made on instruments with ProWax and O-Cap protection. Omnidirectional mode is used unless other-wise stated.
Scale 1:1
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours*Size: 312 (IEC PR41) / 13 (IEC PR48)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environmentNote: For custom instruments, the maximum gain is customised for optimal size and performance.
126 dB SPL 117 dB SPL119 dB SPL 111 dB SPL117 dB SPL 113 dB SPL
59 dB 50 dB51 dB 43 dB50 dB 45 dB44 dB 37 dB
100-9600 Hz 100-8000 Hz81 dB SPL -
101 dB SPL -- 90/90 dB SPL
2.0 % <2 %2.0 % <2 %3.0 % 2.0 %
22 dB SPL 19 dB SPL32 dB SPL 29 dB SPL
1.0 mA 1.0 mA1.0 mA 1.0 mA
125/140/260
800/1400/2000 MHz: 21/39/<14 dB SPL800/1400/2000 MHz: <20/26/29 dB SPL
130 dB SPL 121 dB SPL123 dB SPL 115 dB SPL121 dB SPL 116 dB SPL
64 dB 54 dB56 dB 47 dB54 dB 49 dB48 dB 40 dB
100-8700 Hz 100-8500 Hz85 dB SPL -
105 dB SPL -- 93/93 dB SPL
<2 % <2 %<2 % <2 %3.0 % 2.0 %
23 dB SPL 19 dB SPL34 dB SPL 29 dB SPL
1.0 mA 1.0 mA1.0 mA 1.0 mA
140/260
800/1400/2000 MHz: 26/55/41 dB SPL
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
_MPO
ITE
100_
711
− 3
0−08
−201
3 −
str
_lo
− 1
4:24
:18
40
50
60
70
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
ALTA
ITE
100_
FO
G_7
11 −
30−
08−2
013
− s
tr_l
o −
14:
30:3
2
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
ITE
100_
MT
_711
− 3
0−08
−201
3 −
str
_lo
− 1
4:27
:48
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
ITE
100_
MPO
_2cc
− 3
0−08
−201
3 −
str
_lo
− 1
4:26
:44
40
50
60
70
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
ITE
100_
FOG
_2cc
− 3
0−08
−201
3 −
str
_lo
− 1
4:30
:57
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
ITE
100
MT_
2cc
− 3
0−08
−201
3 −
str
_lo
− 1
4:28
:23
8
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
MPO
711
− 3
1−03
−201
4 −
kbn
_tjn
− 1
4:42
:29
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
des
ignR
ITE
FOG
_711
− 0
2−04
−201
4 −
kbn
_tjn
− 1
3:53
:13
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
MPO
2cc
− 3
1−03
−201
4 −
kbn
_tjn
− 1
4:42
:57
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
FO
G 2
cc −
31−
03−2
014
− k
bn_t
jn −
14:
41:1
4
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Freq
uenc
y re
spon
ce d
esig
nRIT
E_71
1 −
02−
04−2
014
− k
bn_t
jn −
15:
27:4
7
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
Fre
quen
cy re
spon
se 2
CC −
02−
04−2
014
− k
bn_t
jn −
15:
28:0
9
12
Technical informationAll measurements are made on instrumentswith ProWax and O-Cap protection.Omnidirectional mode is used unless otherwise stated.
Scale 1:1
OSPL90
Full-on Gain
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
OSPL90
Full-on Gain
Frequency Response Frequency Response
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L / RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours*Size: 312 (IEC PR41) / 13 (IEC PR48)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environmentNote: For custom instruments, the maximum gain is customised for optimal size and performance.
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
CUSTOM 100OTICON ALTA2 PRO
OTICON ALTA2
designRITE 80OTICON ALTA2 PRO
OSPL90
Full-on Gain
OSPL90
Full-on Gain
Frequency Response Frequency Response
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours* Size: 10 (IEC PR70)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
13
Warning to the instrument dispenserThe maximum output capability of the hearing instrument may exceed 132 dB SPL (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user.
135 dB SPL 127 dB SPL135 dB SPL 127 dB SPL130 dB SPL 123 dB SPL
71 dB 62 dB67 dB 59 dB65 dB 58 dB60 dB 48 dB
100-8175 Hz 100-8000 Hz95 dB SPL -
115 dB SPL -- 105/105 dB SPL
<2 % <2 %<2 % <2 %2.0 % <2 %
17 dB SPL 15 dB SPL27 dB SPL 26 dB SPL
0.9 mA 0.9 mA0.9 mA 0.9 mA
155/290
800/1400/2000 MHz: 15/45/28 dB SPL
127 dB SPL 117 dB SPL120 dB SPL 112 dB SPL117 dB SPL 111 dB SPL
62 dB 53 dB53 dB 44 dB50 dB 47 dB45 dB 34 dB
100-9300 Hz 100-7500 Hz- -- -- -
<2 % <2 %<2 % <2 %<2 % <2 %
21 dB SPL 17 dB SPL33 dB SPL 30 dB SPL
1.0 mA 1.0 mA1.3 mA 1.3 mA
90
800/1400/2000 MHz: <17 dB SPL
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteS_
MPO
_711
− 2
9−08
−201
2 −
str
_lo
− 1
5:45
:26
10
20
30
40
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteS_
FOG
_711
− 2
9−08
−201
2 −
str
_lo
− 1
6:23
:55
60
70
80
90
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteS_
RTG
_711
− 1
2−09
−201
2 −
str
_lo
− 0
8:31
:12
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteS_
MPO
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
5:46
:01
10
20
30
40
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteS_
FOG
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
6:24
:26
60
70
80
90
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteS_
RTG
_2cc
− 1
2−09
−201
2 −
str
_lo
− 0
8:31
:38
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteM
_MPO
_711
− 2
9−08
−201
2 −
str
_lo
− 1
5:41
:44
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteM
_FO
G_7
11 −
29−
08−2
012
− s
tr_l
o −
16:
25:5
1
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteM
_MPO
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
5:40
:54
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteM
_FO
G_2
cc −
29−
08−2
012
− s
tr_l
o −
16:
26:4
3
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteM
_RTG
_711
− 2
9−08
−201
2 −
str
_lo
− 1
6:19
:35
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteM
_RTG
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
6:20
:12
miniRITE 85OTICON ALTA2 PRO
OTICON ALTA2
miniRITE 60OTICON ALTA2 PRO
OTICON ALTA2
OSPL90
Full-on Gain
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
OSPL90
Full-on Gain
Frequency Response Frequency Response
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gain Frequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours* Size 312 (IEC PR41)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
14
OSPL90
Full-on Gain
OSPL90
Full-on Gain
Frequency Response Frequency Response
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours* Size 312 (IEC PR41)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
15
115 dB SPL 105 dB SPL110 dB SPL 101 dB SPL108 dB SPL 103 dB SPL
46 dB 35 dB37 dB 29 dB34 dB 30 dB30 dB 26 dB
100-9500 Hz 100-8300 Hz- -- -- -
<2 % <2 %<2 % <2 %<2 % <2 %
21 dB SPL 16 dB SPL29 dB SPL 24 dB SPL
1.0 mA 1.0 mA1.1 mA 1.3 mA
130
800/1400/2000 MHz: 43/26/18 dB SPL
127 dB SPL 118 dB SPL123 dB SPL 114 dB SPL119 dB SPL 114 dB SPL
65 dB 55 dB51 dB 43 dB52 dB 47 dB44 dB 38 dB
100-9500 Hz 100-8700 Hz- -- -- -
<2 % <2 %2.4 % <2 %<2 % <2 %
25 dB SPL 18 dB SPL33 dB SPL 25 dB SPL
1.0 mA 1.0 mA1.1 mA 1.2 mA
130
800/1400/2000 MHz: 45/30/25 dB SPL
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteP_
MPO
_711
− 2
9−08
−201
2 −
str
_lo
− 1
5:49
:32
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 m
iniR
ite 1
05 M
PO 7
11 −
02−
12−2
014
− k
bn_t
jn −
14:
37:0
6
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteP_
FOG
_711
− 2
9−08
−201
2 −
str
_lo
− 1
6:27
:33
40
50
60
70
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 m
iniR
ITE
105
FOG
711
− 0
3−12
−201
4 −
kbn
_tjn
− 1
3:19
:33
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteP_
RTG
_711
− 2
9−08
−201
2 −
str
_lo
− 1
6:21
:14
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 m
iniR
ITE
105
freq
resp
onse
711
− 0
2−12
−201
4 −
kbn
_tjn
− 1
4:40
:05
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteP_
MPO
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
5:50
:28
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 m
iniR
ITE
105
MPO
2cc
− 0
2−12
−201
4 −
kbn
_tjn
− 1
4:37
:47
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteP_
FOG
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
6:28
:08
40
50
60
70
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 m
iniR
ITE
FOG
2cc
− 0
3−12
−201
4 −
kbn
_tjn
− 1
3:19
:59
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteP_
RTG
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
6:21
:53
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 m
iniR
ITE
105
Freq
resp
onse
2cc
− 0
2−12
−201
4 −
kbn
_tjn
− 1
4:40
:23
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours*Size 312 (IEC PR41)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
miniRITE 100OTICON ALTA2 PRO
OTICON ALTA2
miniRITE 105OTICON ALTA2 PRO
OTICON ALTA2
OSPL90 OSPL90
Full-on Gain Full-on Gain
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
OSPL90 OSPL90
Full-on Gain Full-on Gain
Frequency Response Frequency ResponseFrequency Response Frequency Response
Technical informationOmnidirectional mode is used unless otherwise stated.
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1 Scale 1:1
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours*Size 312 (IEC PR41)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
Warning to the instrument dispenserThe maximum output capability of the hearing instrument may exceed 132 dB SPL (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user.
Warning to the instrument dispenserThe maximum output capability of the hearing instrument may exceed 132 dB SPL (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user.
16 17
135 dB SPL 125 dB SPL133 dB SPL 123 dB SPL130 dB SPL 121 dB SPL
72 dB 61 dB65 dB 55 dB64 dB 55 dB57 dB 44 dB
100-8100 Hz 100-7900 Hz- -- -- -
2.5 % <2 %2.0 % <2 %2.0 % <2 %
18 dB SPL 16 dB SPL29 dB SPL 28 dB SPL
1.0 mA 1.0 mA1.1 mA 1.3 mA
130
800/1400/2000 MHz: 39/28/24 dB SPL
132 dB SPL 124 dB SPL131 dB SPL 124 dB SPL126 dB SPL 121 dB SPL
66 dB 57 dB56 dB 49 dB58 dB 52 dB50 dB 44 dB
100-8700 Hz 100-8100 Hz- -- -- -
2.5 % <2 %<2 % <2 %<2 % <2 %
22 dB SPL 16 dB SPL30 dB SPL 25 dB SPL
1.0 mA 1.0 mA1.1 mA 1.3 mA
130
800/1400/2000 MHz: 46/28/23 dB SPL
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteM
_MPO
_711
− 2
9−08
−201
2 −
str
_lo
− 1
5:41
:44
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteM
_FO
G_7
11 −
29−
08−2
012
− s
tr_l
o −
16:
25:5
1
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Rite
M_M
T_71
1 −
12−
09−2
012
− s
tr_l
o −
08:
16:5
3
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteM
_MPO
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
5:40
:54
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteM
_FO
G_2
cc −
29−
08−2
012
− s
tr_l
o −
16:
26:4
3
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Rite
M_M
T_2c
c −
12−
09−2
012
− s
tr_l
o −
08:
17:4
2
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteS_
MPO
_711
− 2
9−08
−201
2 −
str
_lo
− 1
5:45
:26
10
20
30
40
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteS_
FOG
_711
− 2
9−08
−201
2 −
str
_lo
− 1
6:23
:55
60
70
80
90
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Rite
S_M
T_71
1 −
12−
09−2
012
− s
tr_l
o −
08:
35:0
7
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteS_
MPO
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
5:46
:01
10
20
30
40
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteS_
FOG
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
6:24
:26
60
70
80
90
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Rite
S_M
T_2c
c −
12−
09−2
012
− s
tr_l
o −
08:
35:4
7
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours*Size 312 (IEC PR41)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
RITE 85OTICON ALTA2 PRO
OTICON ALTA2
OSPL90
Full-on Gain
Frequency Response
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
OSPL90
Full-on Gain
Frequency Response
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
18 19
RITE 60OTICON ALTA2 PRO
OTICON ALTA2
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours* Size 312 (IEC PR41)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
OSPL90
Full-on Gain
Frequency Response
OSPL90
Full-on Gain
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Frequency Response
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
127 dB SPL 118 dB SPL123 dB SPL 114 dB SPL119 dB SPL 114 dB SPL
65 dB 55 dB51 dB 43 dB52 dB 47 dB44 dB 38 dB
100-9500 Hz 100-8700 Hz79 dB SPL -99 dB SPL -
- 95/95 dB SPL<2 % <2 %2.4 % <2 %<2 % <2 %
25 dB SPL 18 dB SPL33 dB SPL 25 dB SPL
1.0 mA 1.0 mA1.1 mA 1.2 mA
130
800/1400/2000 MHz: 19/41/36 dB SPL
115 dB SPL 105 dB SPL110 dB SPL 101 dB SPL108 dB SPL 103 dB SPL
46 dB 35 dB37 dB 29 dB34 dB 30 dB30 dB 26 dB
100-9500 Hz 100-8300 Hz65 dB SPL -85 dB SPL -
- 82/82 dB SPL<2 % <2 %<2 % <2 %<2 % <2 %
21 dB SPL 16 dB SPL29 dB SPL 24 dB SPL
1.0 mA 1.0 mA1.1 mA 1.3 mA
130
800/1400/2000 MHz: 27/46/51 dB SPL
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 R
ITE
105
MPO
711
− 0
2−12
−201
4 −
kbn
_tjn
− 1
5:07
:18
40
50
60
70
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 R
ITE
105
FOG
_711
− 0
3−12
−201
4 −
kbn
_tjn
− 1
3:20
:50
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 R
ITE
105
MT
711
− 0
3−12
−201
4 −
kbn
_tjn
− 1
3:16
:16
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 R
ITE
105
MPO
2cc
− 0
2−12
−201
4 −
kbn
_tjn
− 1
5:07
:50
40
50
60
70
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 R
ITE
FOG
2cc
− 0
3−12
−201
4 −
kbn
_tjn
− 1
3:21
:15
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 R
ITE
105
MT
2cc
− 0
3−12
−201
4 −
kbn
_tjn
− 1
3:16
:46
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteP_
MPO
_711
− 2
9−08
−201
2 −
str
_lo
− 1
5:49
:32
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteP_
FOG
_711
− 2
9−08
−201
2 −
str
_lo
− 1
6:27
:33
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Rite
P_M
T_71
1 −
12−
09−2
012
− s
tr_l
o −
08:
18:2
7
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteP_
MPO
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
5:50
:28
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
mR
iteP_
FOG
_2cc
− 2
9−08
−201
2 −
str
_lo
− 1
6:28
:08
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Rite
P_M
T_2c
c −
12−
09−2
012
− s
tr_l
o −
08:
18:5
5
RITE 105OTICON ALTA2 PRO
OTICON ALTA2
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours*Size 312 (IEC PR41)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
Warning to the instrument dispenserThe maximum output capability of the hearing instrument may exceed 132 dB SPL (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user.
OSPL90
Full-on Gain
Frequency Response
OSPL90
Full-on Gain
Frequency Response
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
21
RITE 100OTICON ALTA2 PRO
OTICON ALTA2
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours*Size 312 (IEC PR41)IRIL (IEC 60118-13-2011)* Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
Warning to the instrument dispenserThe maximum output capability of the hearing instrument may exceed 132 dB SPL (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user.
OSPL90
Full-on Gain
Frequency Response
OSPL90
Full-on Gain
Frequency Response
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
20
135 dB SPL 125 dB SPL133 dB SPL 124 dB SPL130 dB SPL 121 dB SPL
72 dB 61 dB65 dB 56 dB64 dB 56 dB58 dB 44 dB
100-8100 Hz 100-7800 Hz94 dB SPL -
114 dB SPL -- 109/109 dB SPL
2.5 % <2 %2.0 % <2 %2.0 % <2 %
18 dB SPL 16 dB SPL29 dB SPL 28 dB SPL
1.0 mA 1.0 mA1.1 mA 1.3 mA
130
800/1400/2000 MHz: 33/51/51 dB SPL
132 dB SPL 124 dB SPL131 dB SPL 124 dB SPL126 dB SPL 121 dB SPL
66 dB 57 dB56 dB 49 dB58 dB 52 dB50 dB 44 dB
100-8700 Hz 100-8100 Hz85 dB SPL -
105 dB SPL -- 101/101 dB SPL
2.5 % <2 %<2 % <2 %<2 % <2 %
22 dB SPL 16 dB SPL30 dB SPL 25 dB SPL
1.0 mA 1.0 mA1.1 mA 1.3 mA
130
800/1400/2000 MHz: <17/49/39 dB SPL
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
G38
_Agi
l_m
iniB
TE_7
11_O
SPL9
0 −
01−
12−2
011
− s
tr_l
o −
15:
13:3
1
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
G38
_Agi
l_m
iniB
TE_7
11_F
OG
− 0
1−12
−201
1 −
str
_lo
− 1
5:16
:44
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
G38
_Agi
l_m
iniB
TE_2
cc_O
SPL9
0 −
01−
12−2
011
− s
tr_l
o −
15:
13:0
5
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
G38
_Agi
l_m
iniB
TE_2
cc_F
OG
− 0
1−12
−201
1 −
str
_lo
− 1
5:16
:11
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
G38
_Agi
l_m
iniB
TE_7
11_F
RES
P −
21−
11−2
011
− s
tr_l
o −
14:
31:2
5
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
G38
_Agi
l_m
iniB
TE_2
cc_F
RES
P_up
date
− 1
4−11
−201
1 −
str
_lo
− 0
9:55
:02
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
BTE1
3_M
PO_7
11 −
12−
09−2
012
− s
tr_l
o −
08:
49:1
1
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
BTE1
3_ga
in_7
11 −
12−
09−2
012
− s
tr_l
o −
09:
00:2
5
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
BTE1
3_M
PO_2
cc −
12−
09−2
012
− s
tr_l
o −
08:
50:0
1
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
BTE1
3_ga
in_2
cc −
12−
09−2
012
− s
tr_l
o −
09:
01:0
0
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
BTE1
3_M
T_71
1 −
12−
09−2
012
− s
tr_l
o −
08:
58:1
2
80
90
100
110
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
BTE1
3_M
T_2c
c −
12−
09−2
012
− s
tr_l
o −
08:
58:4
1
BTE13 85OTICON ALTA2 PRO
OTICON ALTA2
miniBTE 85OTICON ALTA2 PRO
OTICON ALTA2
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours**Size 312 (IEC PR41)IRIL (IEC 60118-13-2011)* For instruments fitted with Corda miniFit
** Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
Std. tube Std. tube
Standard tube Thin tube (size 1/0.9)
Standard tube Thin tube (size 1/0.9)
OSPL90
Full-on Gain
Frequency Response
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
OSPL90
Full-on Gain
Frequency Response
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1
22
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours**Size 13 (IEC PR48)IRIL (IEC 60118-13-2011)* For instruments fitted with Corda miniFit
** Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
Std. tube Std. tube
Standard tube Thin tube (size 1/0.9)
Standard tube Thin tube (size 1/0.9)
OSPL90
Full-on Gain
Frequency Response
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
OSPL90
Full-on Gain
Frequency Response
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
23
131 (122*) dB SPL 121 (117*) dB SPL126 (114*) dB SPL 120 (105*) dB SPL119 (116*) dB SPL 118 (109*) dB SPL
62 (61*) dB 53 (57*) dB50 (39*) dB 44 (30*) dB50 (52*) dB 46 (40*) dB
43 dB 41 dB100-8500 Hz 100-7500 Hz
- -- -- -
<2 % <2 %<2 % <2 %<2 % <2 %
22 dB SPL 17 dB SPL29 dB SPL 25 dB SPL
1.0 mA 1.0 mA1.1 mA 1.2 mA
130
800/1400/2000 MHz: <18/24/36 dB SPL
126 (126*) dB SPL 117 (123*) dB SPL121 (108*) dB SPL 114 (100*) dB SPL116 (116*) dB SPL 113 (106*) dB SPL
61 (63*) dB 51 (59*) dB50 (36*) dB 43 (28*) dB49 (52*) dB 44 (41*) dB
43 dB 36 dB100-9500 Hz 100-7700 Hz
79 dB SPL -99 dB SPL -
- 94/94 dB SPL<2 % <2 %<2 % <2 %<2 % <2 %
23 dB SPL 18 dB SPL32 dB SPL 27 dB SPL
1.1 mA 1.1 mA1.1 mA 1.1 mA
240
800/1400/2000 MHz: 24/48/45 dB SPL
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
BTE1
3P_M
PO_7
11 −
12−
09−2
012
− s
tr_l
o −
08:
51:2
2
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
BTEP
_gai
n_up
date
Cord
a_71
1 −
04−
10−2
012
− s
tr_l
o −
16:
57:3
2
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
BTE1
3P_M
PO_2
cc −
12−
09−2
012
− s
tr_l
o −
08:
52:0
6
30
40
50
60
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
BTEP
_gai
n_up
date
Cord
a_2c
c −
04−
10−2
012
− s
tr_l
o −
16:
58:2
3
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
BTE1
3P_M
T_71
1 −
12−
09−2
012
− s
tr_l
o −
08:
55:0
3
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
BTE1
3P_M
T_2c
c −
12−
09−2
012
− s
tr_l
o −
08:
56:0
4
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 BT
E13P
P O
SPL9
0 71
1 −
01−
06−2
015
− t
aje
− 0
9:00
:08
40
50
60
70
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 BT
E13P
P FO
G 7
11 −
01−
06−2
015
− t
aje
− 0
9:02
:39
100
110
120
130
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 BT
E13P
P O
SPL9
0 2C
C −
01−
06−2
015
− t
aje
− 0
9:00
:58
40
50
60
70
dB
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 BT
E13P
P FO
G 2
CC −
01−
06−2
015
− t
aje
− 0
9:03
:46
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 BT
E13P
P M
T Fr
eque
ncy
Res
pons
e 71
1 −
01−
06−2
015
− t
aje
− 0
9:05
:17
90
100
110
120
dB SPL
100 200 Hz 500 1000 2000 Hz 5000 10000
Alta
2 BT
E13P
P M
T Fr
eque
ncy
Res
pons
e 2C
C −
01−
06−2
015
− t
aje
− 0
9:05
:48
BTE13 100OTICON ALTA2 PRO
OTICON ALTA2
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours**Size 13 (IEC PR48)IRIL (IEC 60118-13-2011)* For instruments fitted with Corda miniFit Power ** Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
Warning to the instrument dispenserThe maximum output capability of the hearing instrument may exceed 132 dB SPL (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user.
Warning to the instrument dispenserThe maximum output capability of the hearing instrument may exceed 132 dB SPL (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user.
OSPL90
Full-on Gain
Frequency Response
OSPL90
Full-on Gain
Frequency Response
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Std. tube Std. tube
Standard tube Thin tube (size 1/1.3)
Standard tube Thin tube (size 1/1.3)
24
BTE13 105OTICON ALTA2 PRO
OTICON ALTA2
OSPL90 Peak 1600 Hz AverageFull-on gain Peak 1600 Hz AverageReference test gainFrequency range Telecoil output (1600 Hz) 1 mA/m field 10 mA/m field SPLITS L/RTotal harmonic distortion 500 Hz(Input 70 dB SPL) 800 Hz 1600 HzEquivalent input noise level (A) Omni DirBattery consumption Quiescent Typical
Battery life, calculated, hours**Size 13 (IEC PR48)IRIL (IEC 60118-13-2011)* For instruments fitted with Corda miniFit Power
** Based on the standardised battery consumption measurement (IIC 60118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
Std. tube Std. tube
Standard tube Thin tube (size 1/1.3)
Standard tube Thin tube (size 1/1.3)
OSPL90
Full-on Gain
Frequency Response
E A R S I M U L A T O RMeasured according to
IEC 60118-0 (1983) and 60711 (1981) and DIN 45605.
2 C C C O U P L E RMeasured according to
ANSI S3.22 (2003) and S3.7 (1995), IEC 60118-7 (2005) and IEC 60318-5 (2006).
OSPL90
Full-on Gain
Frequency Response
Technical informationOmnidirectional mode is used unless otherwise stated.
Scale 1:1
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
Acoustic input: 60 dB SPL Magnetic input: 31.6 mA/m
25
135 (132*) dB SPL 126 (128*) dB SPL128 (116*) dB SPL 120 (108*) dB SPL122 (121*) dB SPL 120 (115*) dB SPL
68 (66*) dB 60 (62*) dB60 (44*) dB 52 (36*) dB57 (56*) dB 53 (49*) dB
53 dB 43 dB100-9500 Hz 100-7400 Hz
89 dB SPL -109 dB SPL -
- 100/100 dB SPL<2 % <2 %<2 % <2 %<2 % <2 %
19 dB SPL 16 dB SPL29 dB SPL 26 dB SPL
1.1 mA 1.1 mA1.1 mA 1.1 mA
240
800/1400/2000 MHz: 24/48/45 dB SPL
138 (133*) dB SPL 133 (131*) dB SPL131 (122*) dB SPL 124 (114*) dB SPL128 (126*) dB SPL 128 (120*) dB SPL
73 (69*) dB 67 (67*) dB66 (57*) dB 59 (49*) dB63 (62*) dB 63 (55*) dB
57 dB 52 dB100-7200 Hz 100-5700 Hz
96 dB SPL -117 dB SPL -
- 105/105 dB SPL5 % 2 %3 % <2 %
<2 % <2 %17 dB SPL 14 dB SPL30 dB SPL 28 dB SPL
1.0 mA 1.0 mA1.1 mA 1.3 mA
270
800/1400/2000 MHz: 36/<16/<16 dB SPL